Effect of plastic strain energy density on polymer optical fiber power losses

We explore the dependence of power losses on average plastic energy densities as rays propagate along deformed polymer optical fibers (POFs). The variation of power losses in deformed POFs with different bend radii and elongations are measured and analyzed. Three-dimensional elastic-plastic finite-element models are used to calculate average plastic energy densities in deformed POFs. The results indicate that the average plastic energy density introduced in a deformed POF can be considered a key index with which to study the power loss. Based on the experimental results, a curve-fitted equation is proposed for estimating the power loss by using the average plastic energy density for various bend radii.     

Laser-assisted bending of Titanium Grade-2 sheets: Experimental analysis and numerical simulation

External force laser-assisted bending of Titanium Grade-2 flat sheets to achieve sharp bending angles (>140°) with small fillet radii is herein investigated. In particular, the influence of the operational parameters, laser power, scan speed, number of passes, on bending angles and fillet radii of the metal substrates is analysed. The experimental results show that shaping of the substrates can be performed with great reliability, being springback largely minimised in broad operational ranges. Exploratory Data Analysis (EDA) allows the design of first approximation technological models and, in turn, the development of 3d processing maps. Based on the experimental findings, numerical modelling of the bending process by the Finite Element Method (FEM) through ABAQUS/Explicit software is also developed. The numerical model is found to match with great accuracy the experimental results, being it also extremely flexible and responsive to the change of the operational parameters.     

Design of a 2.5 THz submillimeter wave laser with optical pump beam guiding

A ring resonator design using the same set of mirrors for pump beam and submillimeter wave (SMMW) beam guiding is introduced. Optimal design is discussed on the example of a 2.5 THz methanol laser. It turns out that due to refocussing of the pump beam on the pinhole certain focal lengths of the focussing mirror, which mainly is responsible for the beam guiding, should be avoided. Diffraction losses and pinhole losses determine optimalg-parameters for which the pump beam guiding losses of the resonator are minimum, and optimal pump beam waist radii.The setup of an experimental laser with the optimized resonator and the experimental setup to measure laser performance are described, and results concerning laser output power, beam quality and efficiency are discussed.     

分布反馈光纤激光器弯曲特性的实验研究

为了研究分布反馈光纤激光器的弯曲特性,对光纤激光器输出波长和弯曲半径的关系进行了理论分析和实验研究.理论分析表明,光纤激光器输出波长变化量与弯曲半径平方的倒数为线性相关,并且随着弯曲半径的增大布拉格波长向短波长方向移动|实验中通过对3支不同波长的光纤激光器在弯曲半径分别为10 mm、20 mm、90 mm时输出波长的测量,验证了理论分析的正确性.实验中采用参考光纤激光器法排除环境干扰,对光纤激光器的激射功率进行了耐弯曲测试,并验证了光纤激光器斜率效率优越的抗弯曲特性.结果表明,在测试的32天内,待测光纤激光器激射功率变化量均小于2 dB,为分布反馈光纤激光器做为弯曲类传感应用的研究提供了重要的参考依据.     

光子晶体光纤弯曲损耗特性研究

对光子晶体光纤的损耗特性进行了分析,并在实验上对两种典型的光子带隙型和全内反射型光子晶体光纤进行了研究.分别对两种不同结构的光子晶体光纤在弯曲半径2~15 mm范围内的损耗进行了测量.与传统光纤损耗实验结果的对比表明,两种光子晶体光纤的弯曲损耗均不明显,具有很强的抗弯曲损耗能力.实验也证实了光子晶体光纤弯曲损耗存在临界弯曲半径,在大于临界半径的情况下,几乎没有弯曲损耗.从结构上分析并证明光子晶体光纤弯曲损耗随填充比(d/Λ)的增加而减小,填充比越高弯曲损耗越小.     

Power flow in coupled bending and longitudinal waves in beams

In complex structures, curvature and impedance discontinuities (e.g., junctions) couple bending and longitudinal waves. Propagation losses for longitudinal waves are often much less than losses for bending waves, and damping treatments often less effective on longitudinal waves. When the dissipation in longitudinal waves is less than that on bending waves, longitudinal waves can provide an efficient means of power flow between bending waves generated at one location and bending waves that are a source of acoustic radiation at another location. In order to design and locate effective treatments, knowledge of the power flow in longitudinal as well as bending waves is required. The measurement of power in both bending and longitudinal waves when both waves are present is demonstrated. Measurements conducted on a straight beam and a T-beam are compared to predictions obtained using finite element methods. The effect of coupling between waves at the junction in a T-beam is illustrated using results from measurements of power flow.     

Growth and collapse of laser-induced bubbles in glycerol--water mixtures

Comprehensive numerical and experimental analyses of the effect of viscosity on cavitation oscillations are performed. This numerical approach is based on the Rayleigh-Plesset equation. The model predictions are compared with experimental results obtained by using a fibre-optic diagnostic technique based on optical beam deflection （OBD）. The maximum and minimum bubble radii as well as the oscillation times for each oscillation cycle are determined according to the characteristic signals. It is observed that the increasing of viscosity decreases the maximum bubble radii but increases the minimum bubble radii and the oscillation time. These experimental results are consistent with numerical results.     

Properties of hollow bent output tips in CO2 laser light delivery system

In order to change the output direction of laser light in a small operation space, two types of hollow bent output tips are proposed for medical laser light delivery system. One is the hollow fiber insert-type, which is of the minimum bending radius of 3 cm. The other type, based on a fixed-bent pyrex glass tube, is of the minimum bending radius of 2 mm. Both types of tips are inner-coated with a silver layer and a cyclic olefin polymer (COP) layer. Loss properties for CO₂ laser light are clarified for the insert-type tips with various bending angles and radii. For the fixed-bent tips, the losses are around 0.7 dB, which are almost not dependent on the bending angles and radii. Transmissions of the tips remain undamaged after 1-h-delivery of 5 W output CO₂ laser light. A nickel layer is coated on the outside wall of fixed-bent tips so as to increase the mechanical strength and lower the surface temperature. Characteristics of surface temperature distribution and time response were experimentally discussed. Transmission properties of pilot beams are also evaluated.     

Increased Power Concentration and its Effects on the Discharge Parameters of the Low Pressure Hg-rare Gas Positive Column. II. Variation of Tube Radius

The reduction of the tube radius is an effective technique for enhancing power concentration. The increased wall losses are compensated by larger field strengths, which counteract the decrease in radiation efficiency with rising current density. The causal relationships are investigated for tube radii of 18-4 mm at constant discharge current i = 200 mA and constant current density j = 1.2 mA/mm² and for parameter variation of the field strength only. The measured efficiencies of the Hg-resonance lines 254 and 185 nm and the electron energy distribution functions agree well with the calculated values. Moreover, the results of the model calculations provide information on the elementary processes involved, such as elastic losses, collisions of second kind, stepwise processes and Coulomb interaction. The results show that Hg-rare gas discharge with tube radii R = 5–10 mm are no less suitable for light production than those with radii between 13 and 18 mm.     

Vibration analysis of composite annular plates by an integral equation technique

In layered plates, coupling between bending and stretching makes the analysis complicated. A numerical method, namely an integral equation technique which has been used for solving static and dynamic problems, is extended to vibration analysis of layered annular plates which are fixed at the inner and outer radii. The results obtained are compared with those of other investigators and a parametric study is made of the effect of layer thickness, the layers being made up of two different materials.     

Simplified Formula of Bending Loss for Optical Fiber Sensors

A simple fiber-optic bending loss formula is achieved for optical fiber sensors. This simple formula considers various bending radii, number of turns, extra bending angle, and wavelength and has good agreement with theoretical and experimental data. We also propose a simplified formula for sensitivity of the fiber-optic bending loss in this article. The defined sensitivity formula has the benefit of showing parameters for fiber-optic bending sensor systems.     

Simplified Formula of Bending Loss for Optical Fiber Sensors

A simple fiber-optic bending loss formula is achieved for optical fiber sensors. This simple formula considers various bending radii, number of turns, extra bending angle, and wavelength and has good agreement with theoretical and experimental data. We also propose a simplified formula for sensitivity of the fiber-optic bending loss in this article. The defined sensitivity formula has the benefit of showing parameters for fiber-optic bending sensor systems.     

Statistical analysis of parameter effects on bending angle in laser forming process by pulsed Nd:YAG laser

In recent years, laser application has been introduced for bending and forming as new processes in manufacturing. The capability of laser bending demands more studies to recognize parameters influencing bending angle of sheet metals. In this study the effects of parameters such as material, laser power, beam diameter, scan velocity, sheet thickness, pass number and pulse duration on bending angle were studied by FEM initially and then followed by experiments. Furthermore, the Taguchi experimental design method was employed to pin point parameters, which significantly affect the bending process of laser bending of St12 and 304 alloy steels, which have a wide range of applications in products manufacturing. A regression analysis was conducted and a closed form equation was derived. The closed form equation can be used in industry to determine which process parameters (factors) enhance the bending angle in laser bending process.     

Polarization mode conversion in an optical microdisk resonator vertically coupled to a waveguide bus

Due to the existence of non-zero, and asymmetrics cross-polarization coupling coefficients between a microdisk and a waveguide bus, high Q (∼10,000) overcoupled microdisks with minimal internal losses and sharp bending curvature (small radii) vertically coupled to a narrow-width ridge waveguide can be engineered as a proper candidate for a narrow-band polarization rotator. A semi-analytical calculation method is presented to realize microdisk-waveguide system as a polarization rotator.     

A Simple and Effective Method for Calculating the Bending Loss and Phase Enhancement of a Bent Planar Waveguide

A simple and effective method is introduced to calculate the bending loss and phase enhancement of a bent planar waveguide. The wave field is represented in terms of Airy functions and an eigenvalue equation is derived by matching the boundary conditions and the radiation condition in the outer cladding layer. The complex propagation constant is obtained by solving the eigenvalue equation with the Newton-Raphson method, and the imaginary part of the propagation constant gives directly the bending loss of the bent waveguide. The results are compared with the previous experimental and numerical results and are shown to be highly accurate and effective. The phase enhancement due to the bending is also studied.     

Disorder-induced losses in photonic crystal waveguides with line defects

A numerical analysis of extrinsic diffraction losses in two-dimensional photonic crystal slabs with line defects is reported. To model disorder, a Gaussian distribution of hole radii in the triangular lattice of airholes is assumed. The extrinsic losses below the light line increase quadratically with the disorder parameter, decrease slightly with increasing core thickness, and depend weakly on the hole radius. For typical values of the disorder parameter the calculated loss values of guided modes below the light line compare favorably with available experimental results.     

相对论重离子碰撞中π源密度分布和小相对动量区域2π干涉学分析

用2π关联函数在小相对动量区域的幂级数展开,得到了不同π源密度分布下源的空间参数、平均半径和均方根半径间关系,与相对论重离子中心碰撞1.8A GeV Ar+Pb的实验结果一致. 给出了上述反应中π源的平均半径和均方根半径.对不同的源密度分布,计算了K_t的值.     

Viscosity and Temperature Effects on the Rate of Oxygen Quenching of Tris-(2,2′-bipyridine)ruthenium(II)

We compare the bimolecular quenching rate constant (k₂) of luminescent tris(2,2′-bipyridine)ruthenium(II) by oxygen in water, ethylene glycol and glycerol as a function of temperature and viscosity to several theoretical models. The Smoluchowski equation with experimentally determined diffusion coefficients produced calculated values that were in the best agreement with experiment. For the less viscous solvent, water, this equation produced a value that was approximately an order of magnitude larger than the experimental value. With an increase in solvent viscosity, the Smoluchowski value approached the experimental value. Using the Smoluchowski equation with calculated diffusion coefficients based on the known radii of the reacting species produced deviations an order of magnitude larger in water and a factor of two or three lower in ethylene glycol and glycerol. If an assumption is made that the radii of both molecules are equal, we have the Stokes Einstein equation, and the only parameters become temperature and viscosity. Using this relationship, the calculated values for water are about a factor of two larger and with ethylene glycol and glycerol about a factor of 6 smaller than experimental data. These results show that bimolecular quenching is a more complex process affected by many parameters such as solvent cage effects in addition to viscosity and temperature.     

表面张力对固壁旁空泡运动特性影响的理论和实验研究

表面张力是影响空泡脉动及空蚀的一个重要因素.对五种不同表面张力液体中空泡脉动（膨胀和收缩）过程进行了研究,并将实验结果与基于空泡生长和溃灭理论的计算结果进行了对比.实验中,用激光作为测试光源,采用光偏转测试系统研究了不同表面张力液体中空泡泡壁运动规律及泡壁速度的变化.结果表明：表面张力对空泡膨胀过程起抑制作用,故液体表面张力愈大,空泡能达到的最大直径越小;表面张力对空泡的收缩过程则起加速作用,液体表面张力愈大,收缩越迅速,空泡泡壁运动速度越大,其所产生的瞬时溃灭压强越大,空化效果越好. 关键词： 表面张力 空泡 光偏转     

Equation of state of planar hard dumbells

An extension of the hard disc equation of state to planar hard dumbells is proposed and the determination of the characteristic geometric measures of dumbells with the reduced length L* ? ?2 is discussed. The second and third virial coefficients following from the proposed equation of state are evaluated and compared with the exact Monte Carlo data. Compressibility factors for four different elongations are calculated and compared with pseudoexperimental data and with results of other methods.