Preparation of 6-chloro-6-desoxy- and 6-iodo-6-desoxycellulose

Conclusions The reaction of 2,3-di-O-acetylcellulose with N-chloro- or N-iodosuccinimide and triphenylphosphine gave the 6-chloro-6-desoxy- and 6-iodo-6-desoxycellulose acetates with a respective degree of substitution (DS) in halogen of 0.8–1.0 and 0.7. The deacetylation of these compounds gave 6-chloro-6-desoxycellulose (DS 0.8) and 6-iodo-6-desoxycellulose (DS 0.6).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2158–2160, September, 1977.     

6, 6-Dialkyl- und 6, 6-Polymethylen-fulvene

The electronic, infrared and NMR spectra of 6, 6-dialkyl-fulvenes and of 6, 6-poly-methylene-fulvenes are reported.     

6A6B, 6A6C,and 6A6D-ditosylates of β-cyclodextrin

Regio-isomers, 6A6B, 6A6C, and 6A6D-ditosylates of β-cyclodextrin prepared by the reaction of β-cyclodextrin with tosyl chloride were easily and effectively separated through reversed phase column chromatography and assigned.     

Regioselective synthesis of 6-amino- and 6-amido-6-deoxypullulans

Hydrophobically modified polysaccharides that contain amine and amide groups possess valuable features for drug delivery and other applications. These chemical groups are known to play a fundamental role in the biological activity of important polysaccharides. Pullulan is known for its non-toxicity and biocompatibility, therefore, we have applied the versatile Staudinger reaction for the synthesis of regioselectively substituted pullulan derivatives containing amine or amide groups with promise for biomedical applications. The synthesis began with the regioselective bromination of pullulan at C-6 with N-bromosuccinimide and triphenylphosphine, providing 6-bromo-6-deoxy-pullulan, which is soluble in a range of organic solvents and therefore is a dynamic intermediate for the synthesis of other pullulan derivatives. Azide displacement of bromide from 6-bromo-6-deoxy-pullulan esters yielded the corresponding 6-azido-6-deoxy-pullulan esters. Staudinger reduction of these azides efficiently and chemoselectively afforded the corresponding amino- or amidopullulans.     

Electron scattering on C6F6 and SF6 molecules

Total absolute cross sections for electron scattering on hexafluorobenzene, C₆F₆, and sulfur hexafluoride, SF₆, molecules, have been measured as a function of impact energy from 0.6 to 250 eV. The total cross section for C₆F₆ exhibits a very broad peak stretching from 10 to 100 eV with some weak features near 9.5 and 15 eV superimposed on the peak. Apart from the well-known low-energy resonant structures in the SF6 total cross section function, a new weak resonant feature close to 25 eV has been noticed in the present experiment, in accordance with earlier theoretical calculations.     

Regioselective synthesis of 6-alkyl- and 6-prenylpolyhydroxyisoflavones and 6-alkylcoumaronochromone derivatives

The palladium-catalyzed coupling reaction of 6-iodoisoflavone, prepared from 3'-iodoacetophenone derivative, with 2-methyl-3-butyn-2-ol gave 6-alkynylisoflavone derivative, which was hydrogenated to give 6-alkylhydroxyisoflavone (luteone hydrate) (2). Dehydration of 2 gave 2',4',5,7-tetrahydroxy-6-prenylisoflavone (luteone) (1). Wighteone hydrate (3) was also synthesized from 6-iodotris(benzyloxy)isoflavone in a similar manner. 6-Alkyl-4'5,7-trihydroxy-coumaronochromone (4) was synthesized by oxidative cyclization of 2 with o-chloranil.     

Soluble mu-Fi bridged niobium clusters: synthesis and crystal structures of (Et4N)6[Nb6Fi6Bri6(NCS)a6]Br2 and Cs1.6K2.4[Nb6Fi6Ii6(NCS)a6

Two new anions [Nb(6)F(i)(6)X(i)(6)(NCS)(a)(6)](4-)(X = Br, I) based on octahedral niobium clusters with edge-bridging F ligands have been prepared by reaction of Cs(3)Nb(6)F(6)Br(12) and Cs(4)Nb(6)F(8.5)I(9.5) with aqueous solution of KSCN. The anions were isolated as (Et(4)N)(6)[Nb(6)F(6)Br(6)(NCS)(6)]Br(2) (1)and Cs(1.6)K(2.4)[Nb(6)F(6)I(6)(NCS)(6)] (2) salts.     

Novel products from C6H5 + C6H6/C6H5 reactions

To date only one product, biphenyl, has been reported to be produced from C(6)H(5) + C(6)H(6)/C(6)H(5) reactions. In this study, we have investigated some unique products of C(6)H(5) + C(6)H(6)/C(6)H(5) reactions via both experimental observation and theoretical modeling. In the experimental study, gas-phase reaction products produced from the pyrolysis of selected aromatics and aromatic/acetylene mixtures were detected by an in situ technique, vacuum ultraviolet (VUV) single photon ionization (SPI) time-of-flight mass spectrometry (TOFMS). The mass spectra revealed a remarkable correlation in mass peaks at m/z = 154 {C(12)H(10) (biphenyl)} and m/z = 152 {C(12)H(8) (?)}. It also demonstrated an unexpected correlation among the HACA (hydrogen abstraction and acetylene addition) products at m/z = 78, 102, 128, 152, and 176. The analysis of formation routes of products suggested the contribution of some other isomers in addition to a well-known candidate, acenaphthylene, in the mass peak at m/z = 152 (C(12)H(8)). Considering the difficulties of identifying the contributing isomers from an observed mass number peak, quantum chemical calculations for the above-mentioned reactions were performed. As a result, cyclopenta[a]indene, as-indacene, s-indacene, biphenylene, acenaphthylene, and naphthalene appeared as novel products, produced from the possible channels of C(6)H(5) + C(6)H(6)/C(6)H(5) reactions rather than from their previously reported formation pathways. The most notable point is the production of acenaphthylene and naphthalene from C(6)H(5) + C(6)H(6)/C(6)H(5) reactions via the PAC (phenyl addition-cyclization) mechanism because, until now, both of them have been thought to be formed via the HACA routes. In this way, this study has paved the way for exploring alternative paths for other inefficient HACA routes using the PAC mechanism.     

Isomer stability of N6C6H6 cages

Recent theoretical studies have identified carbon-nitrogen cages that are potentially stable high energy density materials (HEDM). One such molecule is an N(6)C(6)H(6) cage in which a six-membered ring of nitrogen is bonded to C(3)H(3) triangles on both sides. This molecule is based on the structure of the most stable N(12) cage, with six carbon atoms substituted into the structure. In the current study, several N(6)C(6)H(6) isomers (including the previously studied cage) are examined by theoretical calculations to determine which is actually the most stable. Stability will be evaluated from two points of view: (1) thermodynamic stability of one isomer versus another and (2) kinetic stability of each isomer as determined by the energetics of bond breaking. Density functional theory (B3LYP), perturbation theory (MP2 and MP4), and coupled-cluster theory (CCSD(T)) are used in this study, along with the correlation-consistent basis sets of Dunning. Trends in thermodynamic and kinetic stability are discussed.     

Electron attachment to MoF6, ReF6, and WF6; reaction of MoF6(-) with ReF6 and reaction of Ar+ with MoF6

Rate constants were measured for electron attachment to MoF(6), ReF(6), and WF(6) in 133 Pa of helium gas using a flowing-afterglow Langmuir-probe apparatus. The experiment is a thorny one because the molecules tend to form oxide impurities on feedline surfaces and because of thermal decomposition of MoF(6) on surfaces as the gas temperature is increased. The electron attachment rate constant for MoF(6) is (2.3+/-0.8)x10(-9) cm(3) s(-1) at 297 K; only MoF(6) (-) is formed in the temperature range of 297-385 K. The rate constant increases with temperature up to the point where decomposition becomes apparent. Electron attachment to ReF(6) occurs with a rate constant of (2.4+/-0.8)x10(-9) cm(3) s(-1) at 297 K; only ReF(6) (-) is produced. MoF(6) (-) reacts with ReF(6) to form ReF(6) (-) on essentially every collision, showing definitively that the electron affinity of ReF(6) is greater than that of MoF(6). A rate constant of (5.0+/-1.3)x10(-10) cm(3) s(-1) was measured for this ion-molecule reaction at 304 K. The reverse reaction is not observed. The reaction of Ar(+) with MoF(6) was found to produce MoF(5) (+)+F, with a rate constant of (1.8+/-0.5)x10(-9) cm(3) s(-1). WF(6) attaches electrons so slowly at room temperature that the attachment rate was below detection level (< or =10(-12) cm(3) s(-1)). By 552 K, the attachment rate constant reaches a value of (2+/-1)x10(-10) cm(3) s(-1).     

C60NH5/6, 6/6异构体的理论研究

用半经验的AM1, PM3及ab initio方法对C60NH两种异构体的结构及光谱进行了理论计算。结果表明, 具有开环结构的C60NH的5/6异构体稳定性要高于具有闭环结构的6/6异构体。计算了两种异构体开环与闭环过程的反应坐标, 发现6/6开环异构体是势能面上的一局部最小点, 而5/6闭环异构体不存在6/6异构体的H可以在两种镜面异构体之间快速翻转, 使其核磁共振谱呈现C2v对称性。通过振动分析确认了所优化的构型确实为势能面的能量最低点, 并得到了C60NH各异构体的红外光谱。     

Porosity control in nylon-6/nylon-6, 6 membranes

The possibility of porosity control in N6/N66 membranes prepared from N6/N66 blend solutions of calcium chloride – methanol mixture was investigated. For N6/N66 blend solutions at 10 °C and 20 °C, the four-phase structure of solid, gel 1, gel 2 and solution was observed clearly in the pore formation process after adding water on a solution surface. In the boundary part between gel 1 and gel 2, the phase separation of N6 and N66 was predicted. The macroscopic pores of blend membranes prepared at 10°C and 20 °C were almost spherical.     

Efficient conversion of 6-cyanopurines into 6-alkoxyformimidoylpurines

An extremely simple method for the selective synthesis of 9-aryl and 9-alkyl 6-alkoxy or 6-alkoxyformimidoylpurines from the corresponding 6-cyanopurines is described. The reaction is carried out with methanol or ethanol in the presence of DBU. At room temperature, nucleophilic attack by the primary alcohol occurs selectively on the cyano carbon atom, leading to 6-alkoxyformimidoylpurines in good yields. Heating the reaction mixture at a temperature greater than or equal to 78 degrees C leads to nucleophilic substitution of the substituent in the 6-position by the alkoxy group, generating the corresponding 6-alkoxypurines, also in excellent yields. The 6-alkoxyformimidoylpurines were used as intermediates in the synthesis of 6-carboxamidinopurines by reaction with methylamine (for 9-methylpurine 5a) or methyl ammonium chloride (for 9-arylpurines and 5b and 5c).     

The tautomerism of 6-hydroxy-, 6-amino- and 6-acylamino-7-azaindolines

The lactam-lactim tautomerism of 6-hydroxy-7-azaindolines and amino-imine tautomerism of 6-amino- and 6-acylamino-7-azaindolines has been studied by IR and UV spectroscopy. It is shown that the lactam-lactim tautomeric equilibrium of 6-hydroxy-7-azaindolines in contrast to the other analogous N-heteroaromatic compounds is not completely shifted for the lactam. The commensurable amounts of both tautomeric forms can be observed in the solutions of 6-hydroxy-7-azaindolines and it is possible to elucidate the influence of the solvent polarity upon the lactam-lactim tautomeric equilibrium. The tautomeric equilibrium of 6-amino- and 6-acylamino-7-azaindolines is practically completely shifted for the amino form, and even acylation with p-toluene-sulfonic acid does not result in a noticeable shift of the tautomeric equilibrium for the amino form in contrast to the other N-heterocyclic amines.     

K6[Mn2O6] und K6[Fe2 O6] - ein Vergleich

K₆[Mn₂O₆] and K₆[Fe₂O₆] - a Comparison K₆[Mn₂O₆] has been prepared (dark-red single crystals). The structure (a = 8.88₆, b = 6.76₀, c = 11.39₄ Å, γ = 132.1°, space group P2₁, Z = 2, 1151 symmetry independent reflections hk0–hk9, R = 0.051) shows Al₂Cl₆-like anions [Mn₂O₆]^6?. By unit-cell transformation to the monoclinic setting P2₁/a (a = 6.76₀, b = 11.39₄, c = 6.63₈ Å, β = 96,9°) the structural similarity to K₆[Fe₂O₆] becomes evident. The Madelung Part of Lattice Energy, MAPLE, is calculated.     

Ordnungszustände im system polyamid-6 und polyamid-6, 6

Blends of PA-6 and PA-6,6 were studied by DSC for different conditions of crystallization. All samples were characterized by x-ray diffraction. From dilute solution the components crystallize in separate modifications. In the melt both components are compatible. PA-6- and PA-6,6-segments are linked together. During rapid quenching of the melt in the samples of about equal composition of PA-6 and PA-6,6 a modification is formed possibly built by a three-dimensional network of hydrogen bonds between PA-6- and PA-6,6-segments. If the samples of the same composition are annealed at 25 K below the melting temperatures of PA-6 and PA-6,6 for 3 hours in each case a modification appears as in quenched samples in addition to only partially ordered crystallites of PA-6 and PA-6,6. Despite optimal annealing there is no complete separation of the components.     

Arachno, nido, and closo aromatic isomers of the Li6B6H6 molecule

We analyzed chemical bonding in low-lying isomers of the recently computationally predicted B(6)H(6)Li(6) molecule. According to our calculations the benzene-like B(6)H(6)Li(6) (D(2h), (1)A(1g)) arachno structure with the planar aromatic B(6)H(6)(6-) anion is the most stable one. A nido isomer with two aromatic B(6)H(6)(4-) (pentagonal pyramid) and Li(3)(+) (triangular) moieties, which can be considered as derived from the global minimum structure through a two-electron intramolecular transfer from B(6)H(6)(6-) to three Li(+) cations, was found to be 10.7 kcal/mol higher in energy. A closo isomer with three aromatic moieties (octahedral B(6)H(6)(2-) and two Li(3)(+)) was found to be 31.3 kcal/mol higher in energy than the global minimum. Another isomer with three aromatic moieties (two B(3)H(3)(2-) and Li(3)(+)) was found to be substantially higher in energy (74.4 kcal/mol). Thus, the intramolecular electron transfers from the highly charged B(6)H(6)(6-) anion to cations are not favorable for the B(6)H(6)Li(6) molecule, even when a formation of three-dimensional aromatic B(6)H(6)(2-) anion and two sigma-aromatic Li(3)(+) cations occurs in the closo isomer.     

In search of benzene-like Sn6(6-): synthesis of Na4CaSn6 with interconnected cyclohexane-like Sn6(6-)

The title compound was synthesized in an attempt to produce stacked benzene-like Sn6(6-) rings separated by alkaline-earth cations in analogy with the recently reported stacks of aromatic cyclopentadienyl-like Sn5(6-) in Na8BaSn6 (in addition to isolated Sn4- anions). The resulting compound, synthesized from a stoichiometric mixture of the elements at high temperature, has the "correct" stoichiometry with six tin atoms and six positive charges. However, the rings of Sn6(6-) are puckered into chair-type cyclohexanes that are interconnected into isolated cylindrical tubes stuffed with Ca2+ between the rings. Such tubes, if fused to each other, form the hexagonal diamond structure. The new compound is electronically balanced according to magnetic and four-probe resistivity measurements. Reported are also the synthesis and properties of Na10EuSn12 and Na10YbSn12 which are isostructural with the known Na10CaSn12.     

Singlet-triplet energy separation in divalent seven-membered cyclic conjugated compounds C6H6C, C6H6Si, C6H6Ge, C6H6Sn, and C6H6Pb

The electronic and thermal energy differences, ΔE(t-s); enthalpy differences, ΔH(t-s); and free energy differences between the singlet and triplet states, ΔG(t-s), were calculated for C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb at the B3LYP/6-311++G (3df, 2p) level. The singlet-triplet splitting, G _s-t, of C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb generally increased from C₆H₆C toward C₆H₆Pb. The most stable tautomers and conformers were suggested for the singlet and triplet states of C₆H₆M (M = C, Si, Ge, Sn and Pb). The geometrical parameters were calculated and discussed. The text was submitted by the authors in English.