Anchoring of histidine-tagged proteins to molecular printboards: self-assembly, thermodynamic modeling, and patterning

In this paper the multivalent binding of hexahistidine (His6)-tagged proteins to beta-cyclodextrin (beta-CD) self-assembled monolayers (SAMs) by using the nickel(II) complex of a hetero-divalent orthogonal adamantyl nitrilotriacetate linker (4) is described. Nonspecific interactions were suppressed by using monovalent adamantyl-hexa(ethylene glycol) derivative 3. With the mono-His6-tagged maltose binding protein (His6-MBP), thermodynamic modeling based on surface plasmon resonance (SPR) titration data showed that the MBP molecules in solution were linked, on average, to Ni.4 in 1:1 stoichiometry. On the surface, however, the majority of His(6)-MBP was complexed to surface-immobilized beta-CDs through three Ni.4 complexes. This difference is explained by the high effective beta-CD concentration at the surface and is a new example of supramolecular interfacial expression. In a similar adsorption scheme, SPR proved that the alpha-proteasome could be attached to beta-CD SAMs in a specific manner. Patterning through microcontact printing of (His6)4-DsRed-fluorescent timer (DsRed-FT), which is a tetrameric, visible autofluorescent protein, was carried out in the presence of Ni.4 Fluorescence measurements showed that the (His6)4-DsRed-FT is bound strongly through Ni.4 to the molecular printboard.     

Quantitative analysis of protein adsorption via atomic force microscopy and surface plasmon resonance

Surface properties have a significant influence on the performance of biomedical devices. The influence of surface chemistry on the amount and distribution of adsorbed proteins has been evaluated by a combination of atomic force microscopy (AFM) and surface plasmon resonance (SPR). Adsorption of albumin, fibrinogen, and fibronectin was analyzed under static and dynamic conditions, employing self-assembled monolayers (SAMs) as model surfaces. AFM was performed in tapping mode with antibody-modified tips. Phase-contrast images showed protein distribution on SAMs and phase-shift entity provided information on protein conformation. SPR analysis revealed substrate-specific dynamics in each system investigated. When multi-protein solutions and diluted human plasma interacted with SAMs, SPR data suggested that surface chemistry governs the equilibrium composition of the protein layer.     

Dendrimer-functionalized self-assembled monolayers as a surface plasmon resonance sensor surface

We report here a multistep route for the immobilization of DNA and proteins on chemically modified gold substrates using fourth-generation NH(2)-terminated poly(amidoamine) dendrimers supported by an underlying amino undecanethiol (AUT) self-assembled monolayer (SAM). Bioactive ultrathin organic films were prepared via layer-by-layer self-assembly methods and characterized by fluorescence microscopy, variable angle spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the AUT SAM base layer on the gold substrates was determined to be 1.3 nm from ellipsometry. Fluorescence microscopy and AFM measurements, in combination with analyses of the XPS/ATR-FTIR spectra, confirmed the presence of the dendrimer/biopolymer molecules on the multilayer sensor surfaces. Model proteins, including streptavidin and rabbit immunoglobulin proteins, were covalently attached to the dendrimer layer using linear cross-linking reagents. Through surface plasmon resonance measurements, we found that sensor surfaces containing a dendrimer layer displayed an increased protein immobilization capacity, compared to AUT SAM sensor surfaces without dendrimer molecules. Other SPR studies also revealed that the dendrimer-based surfaces are useful for the sensitive and specific detection of DNA-DNA interactions. Significantly, the multicomponent films displayed a high level of stability during repeated regeneration and hybridization cycles, and the kinetics of the DNA-DNA hybridization process did not appear to be influenced by surface mass transport limiting effects.     

Detailed Evidence for an Unparalleled Interaction Mode between Calmodulin and Orai Proteins

Calmodulin (CaM) binds most of its targets by wrapping around an amphipathic α‐helix. The N‐terminus of Orai proteins contains a conserved CaM‐binding segment but the binding mechanism has been only partially characterized. Here, microscale thermophoresis (MST), surface plasmon resonance (SPR), and atomic force microscopy (AFM) were employed to study the binding equilibria, the kinetics, and the single‐molecule interaction forces involved in the binding of CaM to the conserved helical segments of Orai1 and Orai3. The results consistently indicated stepwise binding of two separate target peptides to the two lobes of CaM. An unparalleled high affinity was found when two Orai peptides were dimerized or immobilized at high lateral density, thereby mimicking the close proximity of the N‐termini in native Orai oligomers. The analogous experiments with smooth muscle myosin light chain kinase (smMLCK) showed only the expected 1:1 binding, confirming the validity of our methods.     

High-affinity chelator thiols for switchable and oriented immobilization of histidine-tagged proteins: a generic platform for protein chip technologies

Protein micro-/nanoarrays are becoming increasingly important in systematic approaches for the exploration of protein-protein interactions and dynamic protein networks, so there is a high demand for specific, generic, stable, uniform, and locally addressable protein immobilization on solid supports. Here we present multivalent metal-chelating thiols that are suitable for stable binding of histidine-tagged proteins on biocompatible self-assembled monolayers (SAMs). The architectures and physicochemical properties of these SAMs have been probed by various surface-sensitive techniques such as contact angle goniometry, ellipsometry, and infrared reflection-absorption spectroscopy. The specific molecular organization of proteins and protein complexes was demonstrated by surface plasmon resonance, confocal laser scanning, and atomic force microscopy. In contrast to the mono-NTA/His6 tag interaction, which has major drawbacks because of its low affinity and fast dissociation, drastically improved stability of protein binding by these multivalent chelator surfaces was observed. The immobilized histidine-tagged proteins are uniformly oriented and retain their function. At the same time, proteins can be removed from the chip surface under mild conditions (switchability). This new platform for switchable and oriented immobilization should assist proteome-wide wide analyses of protein-protein interactions as well as structural and single-molecule studies.     

Influence of antibody immobilization strategy on molecular recognition force microscopy measurements

A systematic evaluation of the effects of antibody immobilization strategy on the binding efficiency and selectivity (e.g., ability to distinguish between specific and nonspecific interactions) of immunosurfaces prepared with F(ab') antibody fragments of rabbit Immunoglobulin G (IgG) is described. F(ab') was attached to gold surfaces either (1) directly via the formation of a gold-thiolate bond or (2) indirectly through a series of a bifunctional linkers containing an alkane chain or ethylene glycol spacer. Immobilization of F(ab') via the sulfhydryl reactive group located opposite the antigen binding site ensured optimum orientation of the antigen binding site. X-ray photoelectron spectroscopy (XPS) and surface plasmon resonance (SPR) were used to confirm surface modification with the bifunctional linkers and antibody immobilization, respectively. Binding efficiency assays performed with SPR indicated that increasing the length of the linker increased the antigen binding efficiency. Atomic force microscopy (AFM) adhesion force measurements indicated that AFM probes functionalized with directly immobilized F(ab') more effectively discriminated between specific and nonspecific surface-bound proteins than probes modified indirectly via linker-immobilized F(ab'). In addition, a greater number of antibody-antigen binding events were observed with directly immobilized F(ab')-functionalized probes.     

基于氨基与表面乙烯砜基反应动力学调控配基表面密度

配基表面密度可控为定量研究生物分子相互作用提供了精准的分子基础。然而,经典混合自组装的方法控制配基密度对于不同自组装体系不具有普适性。本文报道了一种基于表面乙烯砜基反应动力学的配基表面密度调控方法。以Nα,Nα-二（羧甲基）-L-赖氨酸（ab-NTA）为生物配基模型,对该表面反应进行了催化剂筛选并利用X射线光电子能谱（XPS）和表面膜电位对该表面反应进行了表征。采用静态水接触角的方法对表面反应的动力学进行了定量表征,计算得到反应速率常数为0.0012 min^-1。采用表面等离子体共振（SPR）分析了该生物功能表面结合组氨酸标签蛋白（SA-6His）的能力,结果表明该表面比传统NHS-NTA表面具有更高的蛋白结合量和结合强度。通过控制反应时间和催化剂种类制备了四种配基密度不同的生物功能表面,并利用SPR对四种表面进行了蛋白质静态吸附实验。实验结果表明通过控制反应时间和催化剂类型均能够实现配基表面密度的调控,并且可以实现表面多价态的调控。     

Building a novel vitronectin assay by immobilization of integrin on calixarene monolayer

Membrane proteins possess significant hydrophobic domains and are likely to deplete their native activity immobilized on the solid surface relative to those occurring in a membrane environment. To investigate an efficient immobilization method, calix[4]crown-ether monolayer as an artificial protein linker system was constructed on the gold surface and characterized by Fourier transform infrared reflection absorption spectroscopy (FTIR-RAS), atomic force microscopy (AFM) and cyclic voltammetry (CV). Integrin alpha(v)beta3 was functionally immobilized onto the monolayer and the integrin-vitronectin interaction was investigated by surface plasmon resonance (SPR). It was found that calix[4]crown-ether was assembled as a monolayer on the gold surface. Orientation and accessibility of integrin alpha(v)beta3 was assessed by sensitive binding of its natural ligand, vitronectin at pg mL(-1) level. Moreover, surface coverage of integrin layer and thickness calculated through SPR curve simulation verified that integrin layer was a monolayer in activated form. In combination with the SPR method, this calix[4]crown monolayer provided a reliable and simple experimental platform for the investigation of isolated membrane proteins under experimental conditions resembling those of their native properties.     

Antigen binding forces of single antilysozyme Fv fragments explored by atomic force microscopy

We used atomic force microscopy (AFM) to explore the antigen binding forces of individual Fv fragments of antilysozyme antibodies (Fv). To detect single molecular recognition events, genetically engineered histidine-tagged Fv fragments were coupled onto AFM tips modified with mixed self-assembled monolayers (SAMs) of nitrilotriacetic acid- and tri(ethylene glycol)-terminated alkanethiols while lysozyme (Lyso) was covalently immobilized onto mixed SAMs of carboxyl- and hydroxyl-terminated alkanethiols. The quality of the functionalization procedure was validated using X-ray photoelectron spectroscopy (surface chemical composition), AFM imaging (surface morphology in aqueous solution), and surface plasmon resonance (SPR, specific binding in aqueous solution). AFM force-distance curves recorded at a loading rate of 5000 pN/s between Fv- and Lyso-modified surfaces yielded a distribution of unbinding forces composed of integer multiples of an elementary force quantum of approximately 50 pN that we attribute to the rupture of a single antibody-antigen pair. Injection of a solution containing free Lyso caused a dramatic reduction of adhesion probability, indicating that the measured 50 pN unbinding forces are due to the specific antibody-antigen interaction. To investigate the dynamics of the interaction, force-distance curves were recorded at various loading rates. Plots of unbinding force vs log(loading rate) revealed two distinct linear regimes with ascending slopes, indicating multiple barriers were present in the energy landscape. The kinetic off-rate constant of dissociation (k(off) approximately = 1 x 10(-3) s(-1)) obtained by extrapolating the data of the low-strength regime to zero force was in the range of the k(off) estimated by SPR.     

Correlation between desorption force measured by atomic force microscopy and adsorption free energy measured by surface plasmon resonance spectroscopy for peptide-surface interactions

Surface plasmon resonance (SPR) spectroscopy is a useful technique for thermodynamically characterizing peptide-surface interactions; however, its usefulness is limited to the types of surfaces that can readily be formed as thin layers on the nanometer scale on metallic biosensor substrates. Atomic force microscopy (AFM), on the other hand, can be used with any microscopically flat surface, thus making it more versatile for studying peptide-surface interactions. AFM, however, has the drawback of data interpretation due to questions regarding peptide-to-probe-tip density. This problem could be overcome if results from a standardized AFM method could be correlated with SPR results for a similar set of peptide-surface interactions so that AFM studies using the standardized method could be extended to characterize peptide-surface interactions for surfaces that are not amenable for characterization by SPR. In this article, we present the development and application of an AFM method to measure adsorption forces for host-guest peptides sequence on surfaces consisting of alkanethiol self-assembled monolayers (SAMs) with different functionality. The results from these studies show that a linear correlation exists between these data and the adsorption free energy (ΔG(o)(ads)) values associated with a similar set of peptide-surface systems available from SPR measurements. These methods will be extremely useful to characterize thermodynamically the adsorption behavior for peptides on a much broader range of surfaces than can be used with SPR to provide information related to understanding protein adsorption behavior to these surfaces and to provide an experimental database that can be used for the evaluation, modification, and validation of force field parameters that are needed to represent protein adsorption behavior accurately for molecular simulations.     

Grafting of single, stimuli-responsive poly(ferrocenylsilane) polymer chains to gold surfaces

Redox-responsive poly(ferrocenylsilane) (PFS) polymer molecules were attached individually to gold surfaces for force spectroscopy experiments on the single molecule level. By grafting ethylenesulfide-functionalized PFS into the defects of preformed self-assembled monolayers (SAMs) of different omega-mercaptoalkanols on Au(111), the surface coverage of PFS macromolecules could be conveniently controlled. Atomic force microscopy (AFM), contact angle, as well as cyclic and differential pulse voltammetry measurements were carried out to characterize the morphology, wettability, and surface coverage of the grafted layers. The values of the PFS surface coverage were found to depend on the chain length of the omega-mercaptoalkanol molecules and on the concentration of the PFS solution but not on the insertion time or on the molar mass of PFS. The equilibrium surface coverages were successfully described by Langmuir adsorption isotherms. For low-surface coverage values (< 6.2 x 10(-4) chain/nm2), achieved by PFS insertion from very dilute solutions (8 x 10(-6) M) into long-chain SAMs, AFM and differential pulse voltammetry showed that surfaces exposing isolated individual polymer chains were obtained. The isolated PFS macromolecules were subjected to in situ AFM-based single molecule force spectroscopy (SMFS) measurements. The single chain elasticity of PFS in isopropanol (and ethanol) was fitted with the modified freely jointed chain (m-FJC) model. This procedure yielded a Kuhn segment length of 0.33 +/- 0.05 nm and a segment elasticity of 32 +/- 5 nN/nm.     

Reversible immobilization of engineered molecules by Ni-NTA chelators

Electrochemical synthesis of nickel-nitrilotriacetic acid (Ni-NTA) chelators, for subsequent immobilization of (His)(6)-tagged proteins (Photosystem II (PSII) as model molecule), on Au or Au-graphite electrodes is compared to chemical synthesis. Results show: (i) higher Ni-NTA surface density, (ii) shorter treatment time (1-12 min vs. 16 h normally needed for self-assembled monolayer (SAM)), (iii) possibility of addressing the chelator to only one Au electrode, in a sensor micro-array.     

Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior

A study of protein resistance of oligo(ethylene glycol) (OEG), HS(CH2)11(OCH2CH2)nOH (n = 2, 4, and 6), self-assembled monolayers (SAMs) on Au(111) surfaces is presented here. Hydroxyl-terminated OEG-SAMs are chosen to avoid the hydrophobic effect observed with methyl-terminated OEG-SAMs, particularly at high packing densities. The structure of the OEG-SAM surfaces is controlled by adjusting the assembly solvent. These SAMs were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Protein adsorption on these surfaces was investigated by surface plasmon resonance (SPR). OEG-SAMs assembled from mixed ethanol and water solutions show higher packing density on gold than those from pure ethanol solution. For EG2OH- and EG4OH-SAMs, proteins (i.e., fibrinogen and lysozyme) adsorb more on the densely packed SAMs prepared from mixed ethanol and water solutions, while EG6OH-SAMs generally resist protein adsorption regardless of the assembly solvent used.     

Functionalized self-assembled monolayers on ultraflat gold as platforms for single molecule force spectroscopy and imaging

Single molecule force spectroscopy is a valuable tool for studying unfolding and nanomechanical properties of proteins. The common practice is to stretch proteins from a surface that was dosed to give a reasonable hit rate and to analyze the curves that exhibit the expected characteristics of a single polymer. Whether the surface-bound proteins are indeed single and isolated remains unclear, and the undesirable protein/surface interactions that obscure informative features of the force curves are implicitly assumed to be absent. In this study, mixed self-assembled monolayers (SAMs) consisting of N-hydroxysuccinimide (NHS) and oligoethylene glycol (OEG) terminated thiols on an ultraflat gold surface were used to covalently immobilize proteins via lysine residues. By the optimization of attachment sites via lysine-NHS linkages amidst a protein-resistant layer of the OEG SAM, it was possible to isolate single proteins for study in a controlled fashion. The single protein distribution on the surface is clearly demonstrated by atomic force microscopy (AFM) imaging. The OEG also significantly reduces nonspecific tip-surface interactions between the cantilever and surface. Stretching covalently attached single proteins produces high-quality and reproducible force-extension curves. This experimental strategy is an attractive platform with which to study protein structure, interactions, and nanomechanical properties of single proteins.     

Polystyrene nanorod formation in <Emphasis Type="Italic">C</Emphasis><Subscript>12</Subscript><Emphasis Type="Italic">E</Emphasis><Subscript>5</Subscript> hemimicelle thin film templates

This paper reports the synthesis and characterization of polystyrene nanorods in hemicylindrical hemimicelles of a nonionic polyoxyethylene surfactant, C ₁₂ E ₅, on graphite. The surface structure is characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy, and contact angle goniometry. Uniformly aligned polystyrene nanorods are captured by AFM. The nanorod dimensions are studied as a function of the reaction time and styrene monomer concentration. The template synthesis using self-assembled surfactant surface aggregates promises to create functional and stable nanostructures for optoelectronics and surface engineering.     

Determination of peptide-surface adsorption free energy for material surfaces not conducive to SPR or QCM using AFM

The interactions between peptides and proteins with material surfaces are of primary importance in many areas of biotechnology. While surface plasmon resonance spectroscopy (SPR) and quartz crystal microbalance (QCM) methods have proven to be very useful in measuring fundamental properties characterizing adsorption behavior, such as the free energy of adsorption for peptide-surface interactions, these methods are largely restricted to use for materials that can readily form nanoscale-thick films over the respective sensor surfaces. Many materials including most polymers, ceramics, and inorganic glasses, however, are not readily suitable for use with SPR or QCM methods. To overcome these limitations, we recently showed that desorption forces (F(des)) obtained using a standardized AFM method linearly correlate to standard-state adsorption free energy values (ΔG°(ads)) measured from SPR in phosphate buffered saline (PBS: phosphate buffered 140 mM NaCl, pH 7.4). This approach thus provides a means to determine ΔG°(ads) for peptide adsorption using AFM that can be applied to any flat material surface. In this present study, we investigated the F(des)-ΔG°(ads) correlation between AFM and SPR data in PBS for a much broader range of systems including eight different types of peptides on a set of eight different alkanethiol self-assembled monolayer (SAM) surfaces. The resulting correlation was then used to estimate ΔG°(ads) from F(des) determined by AFM for selected bulk polymer and glass/ceramic materials such as poly(methyl methacrylate) (PMMA), high-density polyethylene (HDPE), fused silica glass, and a quartz (100) surface. The results of these studies support our previous findings regarding the strong correlation between F(des) measured by AFM and ΔG°(ads) determined by SPR, and provides a means to estimate ΔG°(ads) for peptide adsorption on macroscopically thick samples of materials that are not conducive for use with SPR or QCM.     

Fabrication of DNA-protein conjugate layer on gold-substrate and its application to immunosensor

The fabrication of antibody thin film using both protein G and oligonucleotide was carried out by self-assembly (SA) technique for immunosensor. A mixture of 11-mercaptoundecanoic acid (MUA) and oligonucleotide with thiol (SH) end group was self-assembled of gold (Au) surface for two-dimensional (2D) configuration. Protein G was chemically adsorbed on the 11-MUA surface, and then the antibody was immobilized on the protein G region. On the immobilized single-stranded DNA, the complementary DNA–antibody conjugate was hybridized for the oriented immobilization of antibody. The formation of self-assembled 11-MUA/oligonucleotide layer, protein G immobilization, antibody layer, and antigen binding was investigated using surface plasmon resonance (SPR). The topographies of the fabricated surfaces were observed by atomic force microscopy (AFM). When compared with the amount of antigen binding on the antibody thin film fabricated by protein G only, the proposed biosurface fabricated with both protein G and oligonucleotide showed better binding capacity, which implicates the improvement of the detection limit.     

Alternative method for fabricating chemically functionalized AFM tips: silane modification of HF-treated Si3N4 probes

An alternative method for fabricating functionalized, atomic force microscopy (AFM) tips is presented. This technique is simple and requires only minimal preparation and tip modification to generate chemically sensitive probes that have a robust organic monolayer of flexible terminal chemistry attached to the surface. Specifically, commercially microfabricated Si3N4 AFM tips were modified with self-assembled monolayers (SAMs) of octadecyltrichlorosilane and (11-bromoundecyl)trichlorosilane after removing the native silicon oxide surface layer with concentrated hydrofluoric acid. The structure of these SAM films on solid silicon nitride surfaces was studied using contact angle goniometry and Fourier transform infrared spectroscopy. Pull-off force measurements on various bare (mica, graphite, and silicon) and SAM-functionalized substrates confirm that mechanically robust, long-chain organic silane SAMs can be formed on HF-treated Si3N4 tips without the presence of an intervening oxide layer. Adhesion experiments show that the integrity of the organic film on the chemically modified tips is maintained over repeated measurements and that the functionalized tips can be used for chemical sensing experiments since strong discrimination between different surface chemistries is possible.     

Immobilization of biotinylated hGBP1 in a defined orientation on surfaces is crucial for uniform interaction with analyte proteins and catalytic activity

Guanylate binding proteins (GBPs) belong to the dynamin superfamily of large GTP binding proteins. A biochemical feature common to these proteins is guanosine-triphosphate (GTP) binding leading to self-assembly of the proteins, and this in turn results in higher catalytic GTP hydrolysis activity. In the case of human guanylate binding protein 1 (hGBP1) homodimer formation is observed after binding of nonhydrolyzable GTP analogs like GppNHp. hGBP1 is one of seven GBP isoforms identified in human. While cellular studies suggest heterocomplex formation of various isoforms biochemical binding studies in quantitative terms are lacking. In this work we established a method to study hGBP1 interactions by attaching this protein in a defined orientation to a surface allowing for interaction with molecules from the solution. Briefly, specifically biotinylated hGBP1 is attached to a streptavidin layer on a self-assembled monolayer (SAM) surface allowing for characterization of the packing density of the immobilized protein by surface plasmon resonance (SPR) technology and atomic force microscopy (AFM), respectively. In addition, the enzymatic activity of immobilized hGBP1 and the kinetics of interaction with binding partners in solution are quantified. We present a procedure for attaching an enzyme in a defined orientation to a surface which exposes its active end, the GTPase domain to the solution resulting in a homogeneous population of this enzyme in terms of enzymatic activity and of interaction with soluble proteins.     

Self-assembled monolayers containing terminal mono-, bis-, and tris-nitrilotriacetic acid groups: characterization and application

We have undertaken a structural and functional study of self-assembled monolayers (SAMs) formed on gold from a series of alkylthiol compounds containing terminal multivalent chelators (MCHs) composed of mono-, bis-, and tris-nitrilotriacetic acid (NTA) moieties. SAMs were formed from single-component solutions of the mono-, bis-, and tris-NTA compounds, as well as from mixtures with a tri(ethylene glycol)-terminated alkylthiol (EG(3)). Contact angle goniometry, null ellipsometry, and infrared spectroscopy were used to explore the structural characteristics of the MCH SAMs. Ellipsometric measurements show that the amount of the MCH groups on surfaces increases with increasing mol % of the MCH thiols in the loading solution up to about 80 mol %. We also conclude that mixed SAMs, prepared in the solution composition regime 0-30 mol % of the MCH thiols, consist of a densely packed alkyl layer, an amorphous ethylene glycol layer, and an outermost layer of MCH groups exposed toward the ambient. Above 30 mol %, a significant degree of disorder is observed in the SAMs. Finally, functional evaluation of the three MCH SAMs prepared at 0-30 mol% reveals a consistent increase in binding strength with increasing multivalency. The tris-NTA SAM, in particular, is enabled for stable and functional immobilization of a His6-tagged extracellular receptor subunit, even at low chelator surface concentrations, which makes it suitable for applications when a low surface density of capturing sites is desirable, e.g., in kinetic analyses.