A pH Switch for β‐Sheet Protein Folding

Protein design advancements have led to biotechnological strategies based on more stable and more specific structures. Herein we present a 6‐residue sequence (HPATGK) that acts as a stable structure‐nucleating turn at physiological and higher pH but is notably unfavorable for chain direction reversal at low pH. When placed into the turn of a β‐sheet, this leads to a pH switch of folding. Using a standard 3‐stranded β‐sheet model, the WW domain, it was found that the pH switch sequence insertion caused minimal change at pH 8 but a ca. 50 °C drop in the melting temperature (T_m) was observed at pH 2.5: ΔΔG_F ≥11.3 kJ mol⁻¹. Using the strategies demonstrated in this article, the redesign of β‐sheets to contain a global, or local, pH‐dependent conformational switch should be possible.     

Theoretical Study Of β2,3‐Peptide Models

Conformational features of α,β‐disubstituted β^2,3‐dipeptide models have been studied with quantum mechanics method. Geometries were optimized with the HF/6‐31G** method, and energies were evaluated with the B3LYP/6‐31G** method. Solvent effect was evaluated with the SCIPCM method. For (2S,3S)‐β^2,3‐dipeptide model 1 , a six‐membered‐ring hydrogen bonded structure is most stable. However, the conformation corresponding to the formation of the 14‐helix is only about 1.7 kcal/mol less stable in methanol solution, indicating that the 14‐helix is favored if a (2S,3S)‐β^2,3‐polypeptide contains more than 5 residues. On the other hand, the conformation corresponding to the formation of β‐sheet is most stable for (2R,3S)‐β^2,3‐dipeptide model 2 , suggesting that this type of β‐peptides is intrinsically favored for the formation of β‐sheet secondary structure.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

TBAF‐Mediated Dimerization Reaction of β,γ‐Unsaturated Arylketones

A simple and high‐yield method for the synthesis of several 1,5‐diaryl‐1,5‐dicarbonyl compounds has been established starting from TBAF‐mediated isomerization and dimerization reaction of β,γ‐unsaturated arylketones (allyl arylketones) with mono‐, di‐, and tri‐methoxy groups, which is derived from allylation of commercially available different benzaldehydes and followed by oxidation of the resulting secondary alcohols.     

Microwave‐Assisted Synthesis of β‐Lactams and Cyclo‐β‐dipeptides

Different cyclo‐β‐dipeptides were prepared from corresponding N‐substituted β‐alanine derivatives under mild conditions using PhPOCl₂ as activating agent in benzene and Et₃N as base. To evaluate β³‐substituent influence, the amino acids 7 – 26 were synthesized, and a β‐lactam formation reaction was carried out instead of cyclo‐β‐dipeptide formation. The crystal structures of three derivatives of cyclo‐β‐peptides and one β‐lactam are presented.     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Palladium‐Catalyzed Carbonylative α‐Arylation to β‐Ketonitriles

A carbonylative α‐arylation process employing unactivated nitriles for the first time is described. The reaction tolerates a range of (hetero)aryl iodides and several nitrile coupling partners. No prefunctionalization of the nitriles is necessary and the resulting β‐ketonitriles are obtained in good to excellent yields. The methodology also allows for a convenient ¹³C‐labelling of the generated carbonyl moiety.     

Helical‐Ribbon Formation by a β‐Amino Acid Modified Amyloid β‐Peptide Fragment

An addition to the family : The introduction of β‐amino acid residues into a modified amyloid β peptide fragment resulted in well‐defined helical nanoribbons (see cryo‐TEM image) comprising β strands mainly oriented perpendicular to the ribbon axis. The nanoribbons order into a flow‐aligning nematic phase at higher concentration. The β‐strand nanoribbon structure is an addition to the known set of secondary structures adopted by β‐peptides.

     

Protein Folding and β‐Sheet Proteins

The aim of this comprehensive review is to critically evaluate the progress in research in the area of protein folding. In the first section, we discuss the various models proposed to explain the protein folding paradox. In the succeeding section of the review, a detailed account of the developments in our understanding of the folding path ways of β‐sheet proteins is provided.