Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Construction and Application of Flow Enzymatic Biosensor Based of Silver Solid Amalgam Electrode for Determination of Sarcosine

In this paper, the flow amperometric enzymatic biosensor based on polished silver solid amalgam electrode for determination of sarcosine in model sample under flow injection analysis conditions is presented. The biosensor works on principle of electrochemical detection of oxygen decrease during enzymatic reaction which is directly proportional to the concentration of sarcosine in sample. The whole preparation process takes about 3 h. The RSD of repeatability of 10 consecutive measurements is 1.6 % (c_sarcosine=1.0×10^?4 mol dm^?3). Under optimal conditions the calibration dependence was linear in the range 7.5×10^?6–5.0×10^?4 mol dm^?3 and limit of detection was 2.0×10^?6 mol dm^?3.     

Electrochemical behavior of electrodeposited film derived from rhein and its activity towards myoglobin reduction

The stable electroactive thin film of rhein has been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical impedance spectroscopy of the electrodeposited film derived from rhein indicated the electrode reaction was kinetically controlled in the region of higher frequency, the charge transfer resistance was 2.6×10³ Ω cm² and capacitance value was 13.2 μF cm² . The electrodeposited film derived from rhein exhibited a good electrocatalytic activity for myoglobin (Mb) reduction. In 0.30 mol dm⁻³ H₂SO₄solution, the catalysis currents were proportional to the concentrations of Mb over the range of 1.5×10⁻⁷–1.3×10⁻⁵ mol dm⁻³. The detection limit is 1.0×10⁻⁷ mol dm⁻³ (S/N=3). The relative standard deviation is 4.8% for eight successive determinations of 5.0×10⁻⁷ mol dm⁻³ Mb.     

The Influencing of Preanodized Inlaying Ultrathin Carbon Paste Electrode on the Oxidation for the Xanthine and Hypoxanthine by the Hydrogen Bond

In this paper, a pre‐anodized inlaying ultrathin carbon paste electrode (PAIUCPE) with 316L as a matrix was constructed by a simple and fast electrochemical pretreatment. Using xanthine (Xa) and hypoxanthine (HXa) as the target compounds, the pH effects compositions of buffer solution, the accumulation times, hydrogen bond catalysis, degree of auxiliary electrode reaction on the size of peak currents (I_p) of Xa and HXa was discussed in detail. Also, it was proposed that Xa and HXa were respectively absorbed at the surface of PAIUCPE through hydrogen bonding. The influencing mechanisms of the PAIUCEP on electrochemical oxidation of Xa and HXa were explained in detail. Moreover, the linear relationships for the Xa and HXa were obtained in the range of 6×10^?8–3×10^?5 mol/L and 2×10^?7–7×10^?5 mol/L, respectively. The detection limits for the Xa and HXa were 1.2×10^?8 mol/L and 5.7×10^?8 mol/L, respectively. Moreover, this proposed method could be applied to determine the Xa and HXa in human urine simultaneously with satisfactory results.     

Sol‐Gel Derived Potentiometric Sensor for Determination of Vanadyl Ions

A sol‐gel electrode, based on thiacalix[4]arene as a neutral carrier, was successfully developed for the detection of VO²⁺ in aqueous solutions. The sol‐gel electrode exhibited linear response with Nernstian slope of 29.3±0.3 mV per decade, within the vanadyl ion concentration ranges 1.0×10^?6 – 1.0×10^?1 mol dm^?3. The sol‐gel electrode shows detection limit of 4.9×10^?7 mol dm^?3. The influence of membrane composition, the pH of the test solution, and the interfering ions on the electrode performance were investigated. The electrode exhibited good selectivities for a number of alkali, alkaline earth, transition and heavy metal ions. The effect of temperature on the electrode response showed that the temperature higher than 60 °C deteriorates the electrode performance. Application of the electrode for the determination of vanadyl in spiked samples is reported.     

Determination of neodymium, holmium and erbium in mixed rare earths by norfloxacin

Norfloxacin (NFX) is proposed as reagent for the derivative spectrophotometric determination of neodymium, holmium and erbium in mixed rare earths. The absorption spectra of 4f electron transitions of the systems of neodymium, holmium and erbium complexes with norfloxacin in presence of cetylpyridinium chloride were studied by normal and derivative spectra. The absorption bands found normally at 575 nm for neodymium, 450 nm for holmium and 523 nm for erbium were enhanced markedly. Using the second derivative spectrum, Beer’s Law is obeyed from 5.0 × 10^–5∼ 2.5 × 10^–4 mol dm^–3 for neodymium, holmium and erbium. The relative standard deviations are 1.0, 1.4 and 1.1% for 6.9 × 10^–5 mol dm^–3 of neodymium, 6.1 × 10^–5 mol dm^–3 of holmium and 6.0 × 10^–5 mol dm^–3 of erbium, respectively. A method for the direct determination of neodymium, holmium and erbium in mixtures of rare earth elements with good accuracy and selectivity, is described. Received: 18 December 1997 / Revised: 23 February 1998 / Accepted: 26 February 1998     

Determination of neodymium, holmium and erbium in mixed rare earths by norfloxacin

Norfloxacin (NFX) is proposed as reagent for the derivative spectrophotometric determination of neodymium, holmium and erbium in mixed rare earths. The absorption spectra of 4f electron transitions of the systems of neodymium, holmium and erbium complexes with norfloxacin in presence of cetylpyridinium chloride were studied by normal and derivative spectra. The absorption bands found normally at 575 nm for neodymium, 450 nm for holmium and 523 nm for erbium were enhanced markedly. Using the second derivative spectrum, Beer’s Law is obeyed from 5.0 × 10^–5∼ 2.5 × 10^–4 mol dm^–3 for neodymium, holmium and erbium. The relative standard deviations are 1.0, 1.4 and 1.1% for 6.9 × 10^–5 mol dm^–3 of neodymium, 6.1 × 10^–5 mol dm^–3 of holmium and 6.0 × 10^–5 mol dm^–3 of erbium, respectively. A method for the direct determination of neodymium, holmium and erbium in mixtures of rare earth elements with good accuracy and selectivity, is described. Received: 18 December 1997 / Revised: 23 February 1998 / Accepted: 26 February 1998     

Applications of electron spin resonance in the analytical chemistry of transition metal ions: Part 3. Determination of Chromium(III) in Aqueous Solution [1]

Chromium(III) can be determined in aqueous solution at pH 1.5– 2.5 by electron spin resonance techniques. The analytical range is 2.0 x 10^-1–2.0 x 10^-6 mol dm^-3 ; the precision is± 0.3%. The effects of instrumental variables are discussed. Few commonly occurring species up to a concentration of 1.0 x 10^-1 mol dm^-3 interfered with the determination. The characteristic g value of 1.98 for chromium(III) suggests that the method may also be used to identify chromium(III).     

New Electrode Material GCE/AgNPs-LS/Hg Based on Nanosilver Produced with the Use of Biopolymers

A method of producing nanosilver by using lignosulfonic acid derivative and a new method of the obtained AgNPs-LS electrode material for developing a chemically modified GCE/AgNPs-LS/Hg electrode is presented. The data demonstrate that the modified electrode shows enhanced performance in determining Tl⁺ ions in comparison to unmodified electrode GCE. The stripping anodic peak current of thallium characterized in linearity over its concentration range from 1.22 ⋅ 10⁻⁸ to 1.15 ⋅ 10⁻⁷ mol dm⁻³, with detection limit 4.6 ⋅ 10⁻⁹ mol dm⁻³. It is assumed that the novel AgNPs-LS/Hg²⁺ complex is suitable for preparing functionalized nanostructured material and can be used as an electrochemical sensing platform for heavy metals.     

Simultaneous Analysis of Pyridoxine and Melatonin in Tablet Formulation by Derivative Ultraviolet Spectroscopy

Abstract

A method for simultaneous analysis of pyridoxine and melatonin by second and third derivative UV - spectroscopy, the “zero - crossing” technique, is described. The determination has been carried out in 0.1 mol dm^?3 hydrochloric acid solution and the concentration range of 2 – 10 μg/ml pyridoxine and 0.5 – 3.5 μg/ml melatonin. Lower limits of detection at the 95% confidence level were 0.26 μg/ml for pyridoxine and 0.05μg/ml for melatonin The advantages of the proposed method include its application for the assay and in-vitro dissolution studies of pyridoxine and melatonin from two different tablet formulations.     

Enhanced Luminescence of Europium by Gadolinium and Its Application

Abstract

The fluorescence enhancement of the Eu-dibenzoylmethane(DBM)- cetylpyridinium-chloride (CPC) system was studied. The fluorescence intensity of the system can be greatly increased by Gd³⁺ in the presence of triethanolamine(TEA). The optimum conditions for enhanced fluorescence of the Eu-Gd-DBM-CPC system were examined. It was a linear function of the Eu³⁺ concentration in the range of 1.0×10^?10～1.0×10^?8 mol dm^?3 under the optimized conditions. The detection limit was 2.6 × 10¹¹ mol dm^?3 in an aqueous solution at pH=7.5～9.5.

The Eu-Gd-DBM-CPC system was applied to the determination of europium in rare earth oxides with satisfactory results. The mechanism of enhanced fluorescence was discussed.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Electroactivated Disposable Pencil Graphite Electrode – New,Cost-effective,and Sensitive Electrochemical Detection of Bioflavonoid Hesperidin

In this paper, for the first time, electroactivated disposable pencil graphite electrode (ePGE) was used for the detection of bioflavonoid hesperidin with cyclic and differential pulse voltammetry. The electroactivation efficiency of the pencil graphite electrode (PGE) was examined employing electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) and the enhancement of electron transfer kinetics of the PGE after the electroactivation was found. Hesperidin is irreversibly oxidized on the ePGE and its oxidation was the most pronounced at pH=5.0. Two electrode processes were detected, on one hand, a mixed diffusion and adsorption control was observed for the first electrode process. On the other hand, only diffusion control was observed in the second electrode process. Linear dependence between the peak current and the hesperidin concentration was obtained in the concentration range from 5×10⁻⁷ mol dm⁻³ to 1×10⁻⁵ mol dm⁻³ and the determined lower limit of detection (LOD) was 2×10⁻⁷ mol dm⁻³. Moreover, hesperidin in pharmaceutical formulation (containing active substance, hesperidin, and excipients) was quantified using ePGE. A good correlation was obtained between experimentally obtained hesperidin concentration by voltammetric analysis and concentration determined by standard HPLC technique (R²=0.9462).     

Two-Dimensional Photoluminescence Behavior of Langmuir-Blodgett Monolayers and Multilayers Composed of Decatungstoeuropate

Decatungstoeuropate/dimethyldioctadecylammonium (EuW₁₀/DODA) Langmuir-Blodgett (LB) monolayers and multilayers (7 layers) were fabricated by using aqueous solution of EuW₁₀ with different concentration (1.0–3.0 μmol dm⁻³). The results of specular X-ray reflectivity (SXR) and grazing incidence X-ray diffraction (GIXD) measurements for the EuW₁₀/DODA LB films indicated an increase in the interlayer distance and in-plane molecular ordering for the film fabricated with the concentrated EuW₁₀ solution, reflecting the dense packing of DODA and EuW₁₀ molecules. Their photoluminescence property also depended on the concentration of the EuW₁₀ solution. With an increase in the EuW₁₀ concentration in the subphase, both the relative intensity of the ⁵D₀→⁷F₁ transition and the emission lifetime increased. The lifetime of emission of the EuW₁₀ LB monolayers changed from 0.8±0.1 ms (1.0 μmol dm⁻³) to 1.0±0.1 ms (2.1 μmol dm⁻³) and 1.3±0.1 ms (3.0 μmol dm⁻³), which became closer to that (2.6 ms) of the solid, and EuW₁₀/DODA LB multilayers had the same tendency. The elongation of the emission lifetime was due to a decrease in the number of aqua molecules within the Eu³⁺-coordination sphere, which will be caused by the dense and regular packing of EuW₁₀ molecules.     

Stripping voltammetric determination of trace levels of uranium by synergic adsorption

A voltammetric method is reported for the determination of low uranium concentrations in natural waters. A very strongly adsorbed mixed complex of uranyl ion with 2-thenoyltrifluoroacetone and tri-n-butyl phosphate is applied. Synergic adsorption is obtained compared with the adsorption obtained with either ligand alone. In 0.55 mol dm^?3 sodium chloride, the detection limit was 10^?10 mol dm^?3 uranyl ion after accumulation for 10 min at ?0.1 V vs. Ag/AgCl. For the natural level of uranium in sea water (about 10^?8 mol dm^?3), accumulation for 2 min was sufficient.     

Voltammetric behavior of methaqualone and its determination by single-sweep oscillopolarography

A well derivative reduction wave of methaqualonc (MTQ) was obtained in 0.033 mol dm⁻³ B-R (pH 3.76) buffer solution by single-sweep oscillopolarography. The peak potential is −1.36 V (vs. saturated calomel reference electrode, SCE). The peak current is proportional to the concentration of methaqualone over the range of 7.0×10⁻⁸-9.0×10⁻⁶ mol dm⁻³. The method has been successfully applied to the determination of methaqualone in tablets. The wave is believed to result from irreversible adsorption through studies of its electrochemical behavior and reaction mechanism.     

Cyclodextrin Modified Carbon Paste Based Electrodes as Sensors for the Determination of Carcinogenic Polycyclic Aromatic Amines

Voltammetric properties and possibility of the determination of carcinogenic aminoderivatives of polycyclic aromatic hydrocarbons, namely 1‐ and 2‐aminonaphthalene and 2‐aminobiphenyl, have been investigated. Carbon paste electrodes (CPE) modified with monomeric α‐, β‐ or γ‐cyclodextrin and carbon‐based screen‐printed electrodes (SPE) surface‐modified with a thin film of β‐cyclodextrin (β‐CDP) or carboxymethylated β‐cyclodextrin (β‐CDPA) condensation polymer were used for that purpose as simple electrochemical biosensors. Analytical procedure for the DPV determination of tested amines using these biosensors was proposed. Linear calibration plots within the concentration range of 2×10^?8 – 2×10^?7 mol dm^?3 and 2×10^?7–1×10^?6 mol dm^?3 with limits of quantification of the order of 10^?9 mol dm^?3 were obtained for the modified CPE and modified SPE.     

ELECTROCHEMICAL SYNTHESIS AND PROPERTIES OF POLY(AZURE B)*

A blue poly(azure B) film has been synthesized using repeated potential cycling between -0.25 and 1. 10 V (versusSCE). The electrolytic solution consisted of 2.5 mmol dm~(-3) azure B, 0.5 mol dm~(-3) NaCl and 0.2 mol dm~(-3) NaH_2PO_4 at the pHrange of 2.0 to 11.0. The in situ visible spectrum during electrolysis of azure B shows that the intensity at 740 nm peakincreases with increasing numbers of potential cycles, which is attributable to the formation of poly(azure B). Thewavelength of its corresponding absorption peak is 98 nm longer than that of azure B. The polymerization rate is stronglyaffected by pH values. The anodic peak potential and cathodic peak potential of the poly(azure B) in a solution of pH 3.0 arenot affected by increasing the scan rate from 25 to 600 mV s~(-1). Poly(azure B) has good electrochemical reversibility and fastcharge transfer characteristic in the pH range of 2.0 and 11.0. The conductivity of poly(azure B) is 1.5×10~(-4) S cm~(-1).According to the differences between FTIR spectra of poly(azure B) and azure B, an electrochemical polymerizationmechanism of azure B is proposed in this paper.     

Influence of hydrofluoric acid on extraction of thorium using a commercially available extraction chromatographic resin

The dependence of Th recovery on hydrofluoric acid (HF) concentration in nitric acid (HNO₃) solutions (1–5 mol/dm³) containing 1 × 10⁻⁶ mol/dm³ of Th and various concentrations of HF and the elution behavior were studied using a commercially available UTEVA (for uranium and tetravalent actinide) resin column. Thorium recovery decreased with an increase in HF concentration in the sample solutions. The concentration of HF at which Th recovery started to decrease was ∼1 × 10⁻⁴ mol/dm³ in 1 mol/dm³ HNO₃ solution, ∼1 × 10⁻³ mol/dm³ in 3 mol/dm³ HNO₃ solution, and ∼1 × 10⁻² mol/dm³ in 5 mol/dm³ HNO₃ solution. When Al(NO₃)₃ (0.2 mol/dm³) or Fe(NO₃)₃ (0.6 mol/dm³) was added as a masking agent for F⁻ to the Th solution containing 1 × 10⁻¹ mol/dm³ HF and 1 mol/dm³ HNO₃, Th recovery improved from 1.4 ± 0.3% to 95 ± 5% or 93 ± 3%. Effective extraction of Th using UTEVA resin was achieved by selecting the concentration of HNO₃ and/or adding masking agents such as Al(NO₃)₃ according to the concentration of HF in the sample solution.     

An Electroanalytical Sensor for the Detection of Gramoxone (Paraquat)

ABSTRACT

Glassy Carbon Electrodes coated with stearic acid provide an amperometric sensor for detection of paraquat, the active ingredient of the herbicide Gramoxone. The linear dynamic range of the sensor for Paraquat is 1.02 × 10^?3 mol dm^?3 to 1.02 × 10^?2 mol dm^?3 with the minimum detection limit 6.37 × 10^?4 mol dm^?3.