A facile and efficient ultrasound-assisted synthesis of novel dispiroheterocycles through 1,3-dipolar cycloaddition reactions

A facile and efficient one-pot three-component procedure for synthesis of novel dispirooxindolecyclo[pyrrolo[1,2-c]thiazole-6,5′-thiazolidine] derivatives without any catalysts under ultrasonic condition has been developed. Combining with the advantages of sonochemistry, such as mild reaction conditions, good yield and short reaction times, we have made a progress on construction of novel disiproheterocyclic compounds via the 1,3-dipolar cycloaddition of azomethine ylides. Several experiments were especially carried out for investigating the acceleration mechanism of ultrasound on the cycloaddition.     

A theoretical study of the regio- and stereoselectivities of non-polar 1,3-dipolar cycloaddition reaction between C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl)acrylamide

The 1,3-dipolar cycloadditions (13DC) of C-diethoxyphosphoryl-N-methylnitrone and N-(2-fluorophenyl) acrylamide have been studied using density functional theory (DFT) calculations at B3LYP/6-31G(d) level of theory. Our calculations show that this 13DC reaction takes place with complete ortho regioselectivity with endo stereoselectivity, which favours kinetically the formation of the ortho–endo cycloadduct, in agreement with the experimental observations. The inclusion of solvent effects does not modify the gas-phase selectivities but slightly decreases the reactivity of the reagents. Analysis of the bond order and charge transfer at the transition states indicates that this 13DC reaction takes place via a one-step asynchronous mechanism. Analysis of the DFT global reactivity indices and the Parr functions of the reagents allow us to provide an explanation of the regioselectivity of this 13DC reaction.     

A theoretical study of the mechanisms for 1,3‐dipolar cycloadditions of diphenyldiazomethane to C60 and C70

The 1,3‐dipolar cycloaddition (1,3‐DPCA) reaction plays a crucial role during the functionalization of fullerenes, which have broad applications in the materials and pharmaceutical fields. In concert with previous experiments, we theoretically investigated the mechanisms of 1,3‐DPCA of diphenyldiazomethane (DDMf) to two fullerenes (C₆₀ and C₇₀) using the M06‐2X density functional method under vacuum and in solvents. To understand the influence of the dipolarophile on these reactions, the 1,3‐DPCA of DDMf to three common acceptors, specifically tetracyanoethylene (TCNE), 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ), and chloranil (CA), was also studied at the same computational level. The substituent effects on the five reactions were investigated by modeling 1,3‐DPCA reactions with 12 different substituted DDMf (DDMs) with five dipolarophiles, totaling 60 reactions. Including the five unsubstituted DDMf reactions, 65 1,3‐DPCA reactions were studied. The stereoselectivity, relative reactivity, solvent effects, and distortion/interaction energy model were carefully considered and analyzed based on their corresponding electronic structures, electrostatic potential surfaces, interaction models, solvent models, and thermodynamic data. An intermediate was identified for each of the 65 reactions. A possible biradical pathway for the reactions between DDMf and the two fullerenes was also investigated. The calculated results corroborate and enrich the experimental observations. The conclusion and detailed discussion are generally important for understanding the 1,3‐DPCA reactions to fullerenes. Copyright © 2014 John Wiley & Sons, Ltd.     

High pressure assisted 1,3-dipolar cycloadditions: Synthesis of silylated triazoles from heteroaryl azides

Abstract

The 1,3-dipolar cycloaddition of 2- and 3-benzothiopheneazide with (trimethyl-sily1)acetylene to yield 1,2,3-triazoles has been studied at pressures up to 1GPa. The kinetics as a function of pressure was followed interfacing a diamond anvil cell to a FTIR spectrometer. Alike with aryl azides, the rate of reaction was found to increase logarithmically with pressure with a yield close to quantitative.     

Theoretical study on the mono and multiply oxygenated Si60H60 fullerene

We have applied density functional theory (DFT) calculations to study the structures, stabilities, electronic and magnetic properties of mono and multiply oxygenated Si₆₀H₆₀ fullerenes (Si₆₀H_60–2nO_n, n = 1, 3, 6, 9, 10, 12, 18, 20, 21, 27 and 30). DFT results show that rearrangement between the closed [6,6] and [5,6] isomers of Si₆₀H₅₈O follows a two-step pathway involving an intermediate and two transition states. Preserving the C₃ symmetry in the cage structure, extra epoxidation of Si₆₀H₆₀ has been accomplished. Based on our results, formation energies per oxygen atom for the multiple additions of oxygen atoms on Si₆₀H₆₀ cage are positive (endothermic character), and increase with the increasing of the number of oxygen atoms. In general, the oxygenation of Si₆₀H₆₀ cage leads to an increase in the electrophilicity of the Si₆₀H_60–2nO_n oxides. The oxygenation of Si–Si bonds not only introduces a substantial broadening of the NMR pattern but also yield individual peaks, indicating different electrostatic environments of silicon nuclei in the Si₆₀H_60–2nO_n oxides.     

Trapping intermediates and comparing relative reactivities: a DFT M06‐2X study on Diels–Alder cycloadditions of butadiene to C60 and C70

All possible types of Diels–Alder cycloadditions of 1,3‐cis‐butadiene to C₆₀ (2 in total) and to C₇₀ (8 in total) were theoretically investigated by the M06‐2X density functional method in gas phase and solutions. An intermediate between the reactant and the transition state was located for each reaction. These intermediates except one have not been experimentally or theoretically reported before. The reactivities of the 10 reactions in both the gas phase and solutions were systematically compared based on the calculated results. The present conclusion agrees with the experimental observations and partly disagrees with the previously theoretical conclusion. Copyright © 2012 John Wiley & Sons, Ltd.     

A DFT study on Diels–Alder cycloadditions of trans‐1,3‐butadiene to C60 and C70

Investigation of the relative reactivity of bonds in fullerenes will provide fundamental theory for the design of fullerene‐based materials. We have theoretically investigated the reactivity of the Diels–Alder (DA) cycloaddition of cis‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ using the M06‐2X hybrid density functional theory (DFT) calculations (J. Phys. Org. Chem. 2012, 25 850–855) and have pointed out that the DA cycloadditions of cis and trans forms of 1,3‐butadiene to ethylene have a specially intimate relationship (J. Phys. Org. Chem. 2014, 27 652–660). For the aim of telling a whole story of the DA cycloaddition concerning C₆₀ and C₇₀, the DA cycloadditions of trans‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ were explored at the same theoretical level as those of the cis‐1,3‐butadiene. The calculated results related with the trans‐ and cis‐1,3‐butadienes were compared. The potential energy curves of DA cycloadditions of trans‐ and cis‐1,3‐butadiene to C₆₀ and C₇₀ were discussed. The distortion–interaction energy model was employed to elucidate the origin of different reactivity of all kinds of C?C bonds. The solvent effects were examined using the continuum solvent model. These current results, along with our previous research, will help to obtain an overall view of the DA cycloadditions of 1,3‐butadiene to C₆₀ and C₇₀. Copyright © 2014 John Wiley & Sons, Ltd.     

Understanding the kinetic solvent effects on the 1,3‐dipolar cycloaddition of benzonitrile N‐oxide: a DFT study

The kinetic solvent effects on the 1,3‐dipolar cycloaddition (13DC) of benzonitrile N‐oxide with cyclopentene [T. Rispens and J. B. F. N. Engberts, J. Phys. Org. Chem. 2005; 18 , 908–917] have been studied using density functional theory (DFT) at the B3LYP/6‐31G(d) level. Solvent effects were analyzed by means of the polarizable continuum model (PCM). The analysis of the potential energy surface shows that this reaction follows an asynchronous concerted mechanism. The topological analysis of the electron localization function (ELF) of the turning points along the reaction pathway explains the diradical nature of mechanism of this reaction. Inclusion of solvent effects does not substantially modify this behavior. The present study points out that, contrary to Diels–Alder reactions, the increase in the solvent polarity leads to a slow inhibition of the 13DC reaction, because of the low polarity of the transition state. Explicit solvation involving the coordination of one water molecule to the dipole puts in evidence the importance of hydrogen bonding in the modest acceleration of this 13DC reaction. These results are in good agreement with experimental outcomes. Copyright © 2011 John Wiley & Sons, Ltd.     

Mechanism of magnesium carbenoid 1,3‐C–H insertion: a DFT study

The 1,3‐C–H insertion of magnesium carbenoid and related species was investigated via density functional theory (DFT) calculations. The 1,3‐C–H insertion occurred according to an S_N2‐like mechanism wherein the nucleophilic C–H bond attacked the electrophilic carbenoid carbon atom. The activation energies for the 1,3‐C–H insertion of (1‐chloropropyl)magnesium chloride, (1‐methoxypropyl)magnesium chloride, and [1‐(methylthio)propyl]magnesium chloride were 20.0, 33.8, and 47.1 kcal/mol, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

New pyrazolino and pyrrolidino[60]fullerenes: the introduction of the hydrazone moiety for the formation of metal complexes

The [3 + 2] cycloaddition reaction of C₆₀ with pyridine‐derived hydrazones (acting as dipolar reagents) was successfully conducted resulting in fullerene derivatives 5a , 5b . The compounds were characterized by means of NMR, UV–Vis spectroscopy, and X‐ray crystallography. The electrochemical behavior was also investigated. The fulleropyrazoline 5a exhibits anodically shifted reduction potentials of about 100 mV when compared with those for C₆₀, whereas 5b exhibits cathodic shifts relative to pristine C₆₀. The complexation reaction of 5b with metallic ions (Zn²⁺, Cd²⁺, and Fe²⁺) was achieved. Job and Benesi–Hildebrand analysis confirmed the formation of complexes with a molar ratio of 1:1 and binding constants between 2.26 × 10⁵ and 1.59 × 10⁵ M^?1. Electrochemistry of these complexes showed a marked influence of the metal ion on the reduction potentials. Copyright © 2016 John Wiley & Sons, Ltd.     

密度泛函理论研究硼掺杂富勒烯和锌卟吩间的准化学键相互作用 (cited: 1)

利用密度泛函(wB97XD/6-31G(d))对硼掺杂富勒烯C₅₉B和锌卟吩形成的超分子复合物C₅₉B-ZnP及其阴离子C₅₉B^{^-}-ZnP进行了研究. 结果表明硼掺杂富勒烯与锌卟吩间有强烈的相互作用,在C₅₉B-ZnP复合物中,富勒烯上的B原子与锌卟吩的N原子间形成准化学键相互作用. 与硼掺杂富勒烯的相互作用导致锌卟吩的电子吸收发生显著红移.     

DFT study of the 1,3‐dipolar cycloaddition of azomethine ylides with maleimide,maleic anhydride,methylacrylate and some simple substituted alkenes

DFT calculations involving the B3LYP functional and 6‐31G(d) basis set have been performed to rationalize the reactivity, regioselectivity, enantioselectivity and diasteriofacial selectivity in the context of 1,3‐dipolar cycloaddition (13DC) reactions of a few acyclic and two cyclic azomethine ylides (AY) leading to enantiomeric/ diasteriomeric excess of the products. In particular, N‐substituted and C‐substituted AYs have been considered for reactions with the substituted ethylenes, maleimide, maleic anhydride and methyl acrylate. From an analysis of the results of calculation for the selected reactions, the regio‐ and exo/endo‐stereoselectivity have been explained. Reactions were followed through transition state (TS) structure optimization, calculation of IRC and activation energies. A rationalization of the trends in regioselectivity and enantioselectivity was attempted with the help of HOMO–LUMO energies, electrophilicity differences (Δω) and an analysis of Pauling's bond order (PBO) in the TS. Copyright © 2009 John Wiley & Sons, Ltd.     

Mechanism and regioselectivity of the 1,3‐dipolar cycloaddition of thiocarbonyl S‐imide with cyclopent‐3‐ene‐1,2‐dione and methoxyethene: a density functional theory approach

A theoretical study on the regioselectivity of 1,3‐dipolar cycloaddition reaction between an uncommon dipole (thiocarbonyl S‐imide) with cyclopent‐3‐ene‐1,2‐dione (DPh1) and methoxyethene (DPh2) has been carried out by means of several theoretical approaches, namely, activation energy, Houk's rule based on the frontier molecular orbital theory and density functional theory (DFT) reactivity indices. The calculations were performed at the DFT‐B3LYP/6‐31G(d) level of theory using GAUSSIAN 09. The present analysis shows that the 1,3‐dipolar cycloaddition of thiocarbonyl S‐imide with DPh1 and DPh2 has normal‐electron demand and inverse‐electron demand character, respectively. Moreover, the results obtained from energetic point view are in agreement with electronic approaches, and the Houk's rule is capable to predict true regioselectivity. Copyright © 2012 John Wiley & Sons, Ltd.     

A DFT/TD‐DFT study for the ground and excited states of peramine and some pyrrolopyrazinone compounds

Peramine, a heterocyclic natural molecule, reveals two main, different in nature, electronic absorption bands. Theoretical calculations at the TD‐B3LYP/6–311++G(d,p) level of theory show that the electronic excitations are connected predominantly with π → π^* and charge‐transfer (CT) transitions. Excitation of electrons from the pyrrolopyrazinone ring to the side chain plays a role in creating the CT transition. The character and energy of the first 30 singlet–singlet electronic transitions have also been investigated for the most stable conformation of peramine. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional investigation of the electronic properties of B80 fullerene exposed to regioselective chemisorption of nucleophiles NH3, PH3 and AsH3

DFT calculations at B3LYP/6-31G(d,p) level are applied to investigate the effect of regioselective chemisorption of nucleophiles NH3, PH3 and AsH3 on the electronic properties of B80 fullerene based on computing CS and EFG parameters and natural charges. Three directions of approaching are considered, the frame site, endohedral and exohedral caps. Our results demonstrate CS and EFG tensors are sensitive to the positions of attached sites and that attachment of XH3 to B80 fullerene exerts not only a structural but also an electronic environment deformation to the cage. Natural charge analyses show about 0.4 e transfer from NH3 ligand and about 0.8 e transfer from PH3 and AsH3 ligands to the cage of B80 fullerene. Parallel to NQR parameters and natural charge analyses suggest that electronic density increases on the first neighbor of B1 in NH3–B80 models and increases on B1 and its first neighbors in PH3–B80 and AsH3–B80 models.     

A DFT study of formaldehyde adsorption on functionalized graphene nanoribbons

Density functional theory (DFT) based ab initio calculations were done to monitor the formaldehyde (CHOH) adsorptive behavior on pristine and Ni-decorated graphene sheet. Structural optimization indicates that the formaldehyde molecule is physisorbed on the pristine sheet via partly weak van der Waals attraction having the adsorption energy of about −15.7 kcal/mol. Metal decorated sheet is able to interact with the CHOH molecule, so that single Ni atoms prefer to bind strongly at the bridge site of graphene and each metal atom bound on sheet may adsorb up to four CHOH. The findings also show that the Ni decoration on graphene surface results in some changes in electronic properties of the sheet and its E_g is remained unchanged after adsorption of CHOH molecules. It is noteworthy to say that no bond cleavage was observed for the adsorption of CHOH on Ni-decorated graphene.     

Pd nanoparticle-mediated acetone sensing performance improvement of SnO2 substrate: A combined DFT and experimental study

The article presents a combined theoretical and experimental study attempting to show how Pd nanoparticles (NPs) loading onto SnO₂ substrate improves the acetone gas sensing performance. Pristine nanostructured SnO₂ and Pd nanoparticles (Pd NPs) loaded SnO₂ substrates have been prepared, characterized, and their acetone sensing performances have been measured. Experimental measurements have shown that Pd NP loading onto SnO₂ suppresses the interfering effects of ethanol, water vapors, etc., and enhances the acetone sensor response, reversibility, response/recovery speeds, and signal-to-noise ratio. Various parameters like the adsorption energy, HOMO–LUMO energy gap, charge distribution, polarizability change, electrophilicity index, global hardness, etc., of several model systems, have been computed by using DFT. The computed parameters have been correlated with the conductivity, local reactivity, sensor response and selectivity, response/recovery times, etc., of the systems to understand the molecular-level effects of the Pd NP loading onto the SnO₂ on the gas sensing process.     

A systematic investigation on the aromaticity and kinetic stability of fullerene C40 isomers

The aromatic character of fullerene C₄₀ isomers was examined by the topological resonance energy and the percentage topological resonance energy models. It was found that they all are highly aromatized at the polyvalent anionic states. The nucleus‐independent chemical shifts at the cage center and the 2(N + 1)² rule cannot be used as an indicator of the aromatic stabilization for C₄₀ isomers and their molecular ions. In addition, we utilized the bond resonance energy model to estimate the kinetic stability of C₄₀ isomers and their molecular ions. The results reveal that the kinetic stability of C₄₀ isomers can be greatly enhanced at their polyvalent anionic states. Both the aromaticity and kinetic stability are closely related to the local structure and the cyclic motion of π electrons. Copyright © 2011 John Wiley & Sons, Ltd.     

Magnetic state of the bulk, surface and nanoclusters of CaMnO3: A DFT study

The electronic structures of bulk, 2D slabs and clusters of CaMnO₃ in various magnetic configurations are presented. The obtained results including optimized cell constant, band-gap, Mn magnetic moment, on-site Coulomb repulsion potential and p-d charge separation potential are in good agreement with experiment data. The energetically most preferable configuration was an insulating charge-transfer ground state with G-type antiferromagnetic (AF) configuration (classified according to Wollan and Koehler, Phys. Rev. 100 (1955) 545). For the finite 2D layers the C-type AF ground state was found to be most stable. The surface effect on magnetism of finite quasi 2D systems appeared to originate in the pyramidal field splitting of Mn 3d levels, which induced the formation of ferromagnetic (FM) regions within the AF matrix and the extension of FM correlation deep through 7 subsurface layers (2.7 nm from the surface). All finite systems (clusters and slabs) were found non-conducting due to the localization of electrons and the cancellation of surface excess carriers (holes) after surface relaxation, although the band-gaps of 2D systems were sufficiently reduced in comparison with that of the bulk.