Efficient coupled PHY and MAC use of physical Bursts in WiMAX/IEEE 802.16e networks

We address several issues related to the efficient use of Bursts in WiMAX/IEEE 802.16e systems. We look on the relation between the PHY layer budding blocks (FEC blocks) and the allocation of MAC level frames (PDUs) over these FEC blocks. In particular, we show how to transmit a given amount of MAC level data bits over a given Burst in order to maximize the number of successfully transmitted data bits in the Burst. We also compute, given an amount of data bits to transmit, what is the Burst size that maximizes each of the following three performance criterion: the number of successfully transmitted data bits in the Burst, the maximum ratio between the number of successfully transmitted data bits to the Burst size, and the number of successfully transmitted data bits per PHY slot. For the first problem the paper shows how to optimally divide the Burst into PDUs and shows that sometimes it is more efficient to use less reliable Modulation/Coding schemes. For the second problem the paper shows that using the PHY slots efficiently is the best criterion to consider.     

Advanced coupled PHY and MAC scheduling in IEEE 802.16e WiMAX systems

In this paper we address some issues related to the mutual influence between the PHY layer building blocks (FEC blocks) and the MAC level allocations in IEEE 802.16e /WiMAX systems, in order to increase the overall PHY and MAC combined efficiency. In these systems transmissions are carried in physical Bursts, both on the Uplink and Downlink channels. Bursts are composed of slots, which are grouped into FEC blocks. The number of slots in a Burst determines the length and number of the FEC blocks. The FEC blocks have a direct influence on the probability that bits are received successfully, and thus on the Burst Goodput, which is defined as the ratio between the average number of bits in the Burst that arrive successfully at the receiver, to the Burst length. In this paper we address a new coupled PHY and MAC scheduling methodology by investigating the relationship between the Burst length and its Goodput in different Modulation/Coding schemes, and investigate, given a Burst, the most efficient such scheme. The outcomes of the paper are twofold: first we show that the Goodput of a Burst is almost not dependent on its length. Second, we show that in most cases, the most efficient Modulation/Coding scheme is the one that enables us to transmit the largest number of bits in a Burst. However, there are a few cases where this is not the case. We show these cases in the paper.     

Coupled PHY,MAC and repetition scheduling in IEEE 802.16 WiMAX systems

We address some issues related to the mutual influence between the PHY layer budding blocks (FEC blocks ), the MAC level allocations, and repetition, in IEEE 802.16e/WiMAX systems, in order to increase the overall combined efficiency. We suggest three methods to use repetition: two are based on the increased transmission success probability due to the transmission and decoding of several copies of the same data, and one is based on signal adding and the decoding of one copy with a larger SNR. The last method turned out to be the most efficient one. We show quantitatively that repetition is efficient mainly in low SNRs where otherwise transmissions are not possible, and in particular in negative SNRs. However, there are cases where using repetition is more efficient than using a stronger Modulation/Coding scheme without repetition. Finally, we also show that repetition shall be used with several Modulation/Coding schemes, and not just with QPSK-1/2 as the IEEE 802.16e/WiMAX standard mandates.     

Cross layer based fast handover for IEEE 802.16e networks

To guarantee the QoS in real time applications in wireless networks, handover delay is one of the most important parameters to be considered while mobile users are changing their point of attachment to the access networks. This calls for a fast handover mechanism that will be able to offer uninterrupted services to mobile users. In this paper, a cross layer based fast handover mechanism is proposed to reduce handover delay and signaling load in IEEE 802.16e wireless metropolitan area networks. This is achieved by overlapping the functions of Medium Access Control (MAC) Layer and Internet Protocol (IP) layer. The analytical results show that the proposed mechanism significantly enhances the handover performance in terms of handover delay and signaling load thus resulting into fast handover.     

Determination of residual stress by use of phase shifting moiré interferometry and hole-drilling method

A phase-shifting moiré interferometry and hole-drilling combined system was developed to determine residual stresses. The relationship between the 2D displacement data of three points around the drilled hole and the residual stresses relieved by hole-drilling was established. The experimental setup consisted of a four-beam moiré interferometer and a computer-controlled hole-drilling system. Two phase shifters controlled by computer were fixed in two of the four optic paths to directly get the displacement data. With special residual stresses calculation software, the phase distributions of the u and v field obtained by moiré interferometry were quickly converted into values of residual stresses. To analyze the accuracy of this experimental system, an aluminum specimen with a blind hole in the center was real-time tensioned in this system. The displacement field obtained by phase shifting moiré interferometry was compared with the finite element method solution. Good agreement was found with respect to each other. As an application, the in-depth residual stresses of a shot-peened aluminum plate were measured by this method, and possible error sources were discussed.     

Induction of Hopf bifurcation and oscillation death by delays in coupled networks

This work explores a system of two coupled networks that each has four nodes. Delayed effects of short-cuts in each network and the coupling between the two groups are considered. When the short-cut delay is fixed, the arising and death of oscillations are caused by the variational coupling delay.     

Efficient generation of N-photon binomial states and their use in quantum gates in cavity QED

A high-fidelity scheme to generate N-photon generalized binomial states (NGBSs) in a single-mode high-Q cavity is proposed. A method to construct superpositions of exact orthogonal NGBSs is also provided. It is then shown that these states, for any value of N, may be used for a realization of a controlled-NOT gate, based on the dispersive interaction between the cavity field and a control two-level atom. The possible implementation of the schemes is finally discussed.     

Dependence of excess bismuth content in precursor sols on ferroelectric and dielectric properties of Bi3.25La0.75Ti3O12 thin films fabricated by chemical solution deposition

Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films were fabricated on Pt/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD), and the dependence of ferroelectric and dielectric properties of the as-deposited BLT thin films on excess Bi content in precursor sols was studied. It is found that the prepared BLT thin film shows the best polarization-electric field, capacitance-voltage and dielectric constant (?_r)-frequency characteristics, when the value of excess Bi content in precursor sols is 10%. In detail, its remnant polarization (2P_r) value is 40 μC/cm², the capacitance tunability is 21% measured at room temperature under conditions of an applied voltage of 8 V and measurement frequency of 10 kHz, and the ?_r is 696 at 100 kHz frequency.     

Properties and characteristics of P(VDF/TrFE) transducers manufactured by a solution casting method for use in the MHz-range ultrasound in air

Highly effective piezoelectric polymer transducers operating in air at high frequencies have been successfully made by casting a solution of ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) P(VDF/TrFE) directly on a backing metal plate, and their performance has been evaluated. By utilizing this method, it has been possible to develop the three kinds of transducers that operate respectively at 4, 6 and 10 MHz in air. For precise evaluation of the performance of the P(VDF/TrFE) transducers, the absorption loss in air was measured up to 10 MHz. It was confirmed that the empirical formula obtained from the measured absorption values in air at high frequencies was in alignment with its theoretical value. In addition, a high lateral resolution acoustic image of a ROM-Chip (amplitude-image) at 6 MHz in air was successfully displayed using an air coupled concave type P(VDF/TrFE) transducer by bonding an epoxy adhesive.     

Standing waves, clustering, and phase waves in 1D simulations of kinetic relaxation oscillations in NO+NH3 on Pt(1 0 0) coupled by diffusion

The Lombardo–Imbihl–Fink (LFI) ODE model of the NO+NH₃ reaction on a Pt(1 0 0) surface shows stable relaxation oscillations with very sharp transitions for temperatures T between 404 and 433 K. Here we study numerically the effect of linear diffusive coupling of these oscillators in one spatial dimension. Depending on the parameters and initial conditions we find a rich variety of spatio-temporal patterns which we group into four main regimes: bulk oscillations (BOs), standing waves (SW), phase clusters (PC), and phase waves (PW). Two key ingredients for SW and PC are identified, namely the relaxation type of the ODE oscillations and a nonlocal (and nonglobal) coupling due to relatively fast diffusion of the kinetically slaved variables NH₃ and H. In particular, the latter replaces the global coupling through the gas phase used to obtain SW and PC in models of related surface reactions. The PW exist only under the assumption of (relatively) slow diffusion of NH₃ and H.