Novel method for the preparation of carbon supported nano-sized amorphous ruthenium oxides for supercapacitors

Nanostructured amorphous RuO₂ · xH₂O/C composite materials are prepared via a modified sol–gel process using glycolic acid. The glycolate anion, which dissociates from glycolic acid at pH 7, behaves as a stabilizer by adsorbing onto the RuO₂ · xH₂O surface, thus resulting in particles with a size of about 2 nm. As evidenced by zeta potential measurements, the surface charge of RuO₂ · xH₂O becomes more electronegative as the amount of glycolic acid increases. After heat treatment at 160 ^oC to remove the stabilizer, RuO₂ · xH₂O/C is found to exhibit an amorphous structure. The specific capacitance of RuO₂ · xH₂O/C particles (40 wt% Ru) prepared in the presence of glycolic acid (0.3 g L⁻¹) is 462 F g⁻¹, which is 30% higher than that of the material prepared in the absence of glycolic acid. Both the nanosized particles and the amorphous structure mainly contribute to this increase in the specific capacitance.     

RP-HPLC-DAD method for the determination of phenylepherine,paracetamol, caffeine and chlorpheniramine in bulk and marketed formulation

A simple, specific and accurate isocratic RP-HPLC-DAD method was developed for the simultaneous determination of phenylephrine, paracetamol, caffeine and chlorpheniramine in bulk and tablet dosage form. The four contents are present in variable concentrations and have variable chromatographic behavior making the process of analysis very difficult. For present studies a reversed-phase C-18 column (150 mm × 4.5 mm i.d., particle size 5 μm) with mobile phase consisting of acetonitrile, methanol and 10 Mm phosphate buffer 16:22:62 (v/v) (pH of buffer 2.5 ± 0.02, adjusted with ortho phosphoric acid) was used. The flow rate was 1.0 ml/min and eluents were monitored at 280 nm. The mean retention times of phenylephrine, paracetamol, caffeine and chlorpheniramine were found to be 1.8, 3.1, 5.2 and 10.9 min, respectively. The method was validated in terms of linearity, range, specificity, accuracy, precision and robustness. The proposed method was successfully applied to the estimation of phenylephrine, paracetamol, caffeine and chlorpheniramine in combined tablet dosage form.     

Copolymerization of glycolic,d,l-lactic and d,l-2-hydroxybutyric acid mixtures present in kraft black liquors

A series of copolymers of glycolic acid (GA), d,l-lactic acid (dl-LA) and d,l-2-hydroxybutyric acid (dl-2HBA) were prepared via melt condensation polymerization. The utilized monomers represent mixtures that are present and potentially obtainable from kraft black liquor by fractionation. Polymerizations were performed in 165 °C at nitrogen atmosphere and reduced pressure using stannous octoate as catalyst. Copolymerizations were conducted with varying dl-2HBA content in order to observe how the presence of the dl-2HBA monomer affects the properties of the polymers. Prepared copolymers were characterized with ¹H NMR and ¹³C NMR, size exclusion chromatography, differential scanning calorimetry and thermogravimetric analysis. The obtained copolymers had molecular weights between M_w = 3500–10,000 g/mol. dl-2HBA had a lowering effect on the glass transition temperatures and molecular weights of the copolymers. However, significant lowering of molecular weight was observed only when the amount of dl-2HBA in the feed exceeded 60%. The results indicate that dl-2HBA can be copolymerized with GA and dl-LA and therefore the corresponding kraft black liquor fractions can be utilized for polymerizations.     

Calcium Carbonate Scale Formation in Pipes: Effect of Flow Rates,Temperature, and Malic Acid as Additives on the Mass and Morphology of the Scale

It is well recognized that calcium carbonates (CaCO₃) is one of the main components of scale that is commonly encountered in chemical and related industries. The calcium carbonate scale often grows extensively on equipment and parts, causing major operational difficulties. This paper presents experiments on calcium carbonate scale formation and control in a piping system where the scale-forming solution flowed in a laminar manner: 30, 40, and 50 mL/min, respectively. Other parameters evaluated were: solution temperature (25, 30 and 40 °C), and concentrations of malic acid (C₄H₆O₅) added as impurities (3.00 and 5.00 ppm). The scale-forming solution was made by mixing equimolar solutions of CaCl2 and Na2CO3, respectively. The scale formation process was monitored by measuring the conductivity of the solution coming out of the piping system. It was found that in all experiments, conductivity decreased abruptly after a certain induction period, during which time the conductivity remained steady. The induction period varied from 17 min to 34 min, which means that the scale starts forming 17 min to 34 min after the mixing of the solution. Higher flow rates resulted in more calcium carbonate scale mass, which indicate that the fluid flow enhances the scale formation. Similarly, increasing the temperature of the solution (25, 30, and 40 °C) resulted in the increase of the scale mass. Overall, higher malic acid concentrations resulted in longer induction time and less scale mass. Depending on the temperature and the malic acid concentration tested, the reduction in scale mass could be ≥ 200%. This drastic reduction in scale mass suggests that malic acid could be an effective anti-scalant for calcium carbonate scale. SEM imaging and its associated EDS analysis confirmed that the scale formed corresponds to that of calcite (CaCO3). The X-ray diffraction analysis of the scale showed that the scale consisted of crystalline matter which corresponds to the powder diffraction data for calcium carbonate. The addition of malic acid in trace amounts (0.00 to 5.00 ppm) was able to alter the morphology of the scale crystals, indicating the preference adsorption of malic acid on specific crystal surface.     

Assay of caffeoylquinic acids in Baccharis trimera by reversed-phase liquid chromatography

Baccharis trimera commonly named ‘carqueja’, is wide-spread in South America and are used as raw material for herbal medicines. A reversed-phase liquid chromatography (RP-LC) method coupled to diode array detector was developed for the analysis of caffeoylquinic acids (CQAs), the main compounds responsible for its digestive activity. The identity of the quinic acids was established by mass spectrometry and were them: 5-O-[E]-caffeoylquinic acid, 3,4-O-[E]-dicaffeoylquinic acid, 3,5-O-[E]-dicaffeoylquinic acid, 4,5-O-[E]-dicaffeoylquinic acid and a tricaffeoylquinic acid. The RP-LC method for the quantitation of the caffeoylquinic acids was validated according to ICH guidelines, based on the following parameters: linearity, selectivity, robustness, limits of detection and quantification, precision and recovery. Hydroalcoholic extracts were prepared by the maceration of the plant material with ethanol:water 1:1 (v/v) in a 0.1:25 g mL^?1 plant:solvent ratio in a water bath at 40 °C. Validation data indicated that the HPLC method proposed is suitable for the analysis of caffeoylquinic acids in B. trimera raw material. The results of the LOD and LOQ analyses for the 5-CQA were 4.1 μg mL^?1 and 12.5 μg mL^?1, respectively, 1.3 μg mL^?1, 3.9 μg mL^?1 for 4,5-diCQA and 1.7 μg mL^?1, 5.1 μg mL^?1 for triCQA. The levels of total CQAs ranged from 2.1 to 4.0 g% (w/w). The influence of season harvest and site collection was also evaluated and variations were observed in the results and can be related to phonologic phase, different locations, seasons and soil. Long term and photostability of plant material were carried out and was observed a stable behavior during the time of the experiments.     

Nutritional,physiological, physicochemical and sensory stability of gamma irradiated Kimchi (Korean fermented vegetables)

Effects of gamma irradiation on nutritional, physiological, physicochemical and sensory properties of the Korean lactic acid fermented vegetable, Kimchi, were investigated. The composition of amino acids and organic acids in Kimchi were not influenced by gamma irradiation less than 10 kGy. Angiotensine converting enzyme inhibitory, xanthin oxidase inhibitory, electron donating and antimicrobial activity of Kimchi extract were stable up to 10 kGy. There were no significant changes in pH and texture at less than 10 kGy. Color values were influenced at 10 kGy of gamma irradiation, and resulted in the increase of L*- and reduction of a*-value. About 90% of panelists identified a sensory difference between non-irradiated and 10 kGy-irradiated sample, and Kimchi irradiated at 10 kGy had lower scores in acceptability than those of the control or irradiated at 2.5 and 5 kGy.     

Hydrogen production by catalytic steam reforming of acetic acid,a model compound of biomass pyrolysis liquids

An environmentally friendly and cost-competitive way of producing hydrogen is the catalytic steam reforming of biomass pyrolysis liquids, known as bio-oil, which can be separated into two fractions: ligninic and aqueous. Acetic acid has been identified as one of the major organic acids present in the latter, and catalytic steam reforming has been studied for this model compound. Three different Ni coprecipitated catalysts have been prepared with varying nickel content (23, 28 and 33% expressed as a Ni/(Ni + Al) relative at.% of nickel). Several parameters have been analysed using a microscale fixed-bed facility: the effect of the catalyst reduction time, the reaction temperature, the catalyst weight/acetic acid flow rate (W/m_HAc) ratio, and the effect of the nickel content. The catalyst with 33% Ni content at 650 °C showed no significant enhancement of the hydrogen yield after 2 h of reduction compared to 1 h under the same experimental conditions. Its performance was poorer when reduced for just 0.5 h. For W/m_HAc ratios greater than 2.29 g catalyst min/g acetic acid (650 °C, 33% Ni content) no improvement was observed, whereas for values lower than 2.18 g catalyst min/g acetic acid a decrease in product gas yields occurred rapidly. The temperatures studied were 550, 650 and 750 °C. No decrease in product gas yields was observed at 750 °C under the established experimental conditions. Below this temperature, the aforementioned decrease became more important with decreasing temperatures. The catalyst with 28% Ni content performed better than the other two.     

Development of efficient SPE–TLC method and evaluation of biological interactions of contraceptives with progesterone receptors

TLC–SPE methodologies were developed to ascertain biological interactions of norethindrone acetate and dydrogesterone contraceptives with plasma progesterone receptor proteins. TLC solvent system for plain and Cu(II) impregnated silica gel plates was n-hexane-n-butanol (90:10, v/v), which took 20 min to run up to 10.0 cm. The best separation was on Cu(II) impregnated plates due to maximum difference in R_f values and compact spots. The optimized SPE conditions were pH 2.0 and 3.0 of phosphate buffer (50 mM) for norethindrone acetate and dydrogesterone, respectively. The flow rate of plasma and eluting solvent (methanol) through C₁₈ cartridge was 0.10 mL/min. The interactions of these contraceptives with progesterone receptor proteins were analysed by TLC–SPE results, which were supported by modelling using PyMOL and Autodoc4 softwares. The dydrogesterone was found to be bound strongly than norethindrone acetate. Attempts have been made to discuss the drugs’ interactions at chemo-supramolecular level.     

Stability-indicating HPLC method for the determination of nicardipine in capsules and spiked human plasma. Identification of degradation products using HPLC/MS

In this stability-indicating, reversed-phase high-performance liquid chromatographic method for nicardipine (NIC), forced degradation has been employed and the formed degradants were separated on a C18 (150 mm × 3.9 mm, 5 μm) analytical column using a mobile phase consisted of 70% methanol: acetic acid containing 0.01 M triethylamine with pH 4. The flow rate was 1.0 mL/min and the photodiode array detection wavelength was 353 nm. Forced degradation of the drug was carried out under acidic, basic, photolytic, and oxidative stress conditions. Chromatographic peak purity data indicated no co-eluting peaks with the main peaks. This method resulted in the detection of seven degradation products. Among these, two major degradation products from basic hydrolysis, one from oxidation by H₂O₂ and four from photolytic stress were identified by mass spectral data. A good linear response was achieved over the range of 0.5–40 μg/mL with a limit of detection (LOD) of 0.011 μg/mL and limit of quantification (LOQ) of 0.036 μg/mL. The suggested method was successfully applied for the analysis of NIC in its commercial capsules, with mean% recovery value of 100.11 ± 2.26%. The method was extended to the in vitro determination on NIC in spiked human plasma samples with mean% recovery of 99.04 ± 5.67%. The suggested method was utilized to investigate the kinetics of photolytic induced degradation.     

Ruellia prostrata Poir. activity evaluated by phytoconstituents,antioxidant, anti-inflammatory,antibacterial activity,and in silico molecular functions

Ruellia prostrata Poir. has been used historically as an anti-cancer, wound healing agent and to treat gonorrhea. We aimed to determine the phytochemicals present in ethyl acetate extract of R. prostrata Poir. (EAERP). We sought to determine the antioxidant, anti-inflammatory, and antibacterial activities in vitro, and toxicity properties in vivo. We also analyzed the Prediction of Activity Spectra for Substances (PASS), physicochemical, ADMET, and drug-likeness properties of phytochemicals in EAERP. To determine phytoconstituents, preliminary phytochemical screening and GC–MS were performed, while FT-IR was used to identify functional groups. The antioxidant activity was evaluated using a DPPH scavenging assay, whereas BSA denaturation and RBC hemolysis inhibition were used to assess anti-inflammatory activity. An agar-well-diffusion assay was performed to estimate the antibacterial activity. Brine shrimp lethality bioassay and oral delivery of EAERP of single-dose were performed to determine cytotoxicity and acute toxicity, respectively. The phytochemical screening revealed the presence of phenols, triterpenoids, saponins, steroids, amino acids, and fat and fixed oils. FT-IR analysis of EAERP showed the presence of many functional groups: alcohols/phenols, carboxylic acids, aldehydes, alkanes, esters, amines, amides, aromatic hydrocarbons, sulfoxides, and alkyl halides. GC–MS revealed the presence of 39 phytoconstituents including steroids, consistent with compounds and functional groups found in preliminary screening and FT-IR. EAERP showed dose-dependent antioxidant activity with an IC₅₀ value of 21.402 µg/mL and anti-inflammatory activity with an IC₅₀ value of 20.564 µg/mL in RBC hemolysis inhibition and 21.115 µg/mL in BSA denaturation assays. EAERP also exhibited dose-related antibacterial activity. EAERP exerted cytotoxicity with an LC₅₀ value of 17.619 μg/mL and acute toxicity with an LD₅₀ value of 4095.328 mg/kg without any adverse effects. The PASS server also predicted that the phytoconstituents of EAERP have antioxidant, anti-inflammatory, and antibacterial activities with probable activity (Pa) ranging from 0.310 to 0.717. Analysis of physicochemical, ADMET, and drug-likeness properties revealed the drug-able efficacy and safety of most compounds. The findings of this study indicated that R. prostrata Poir. contains phytoconstituents with potent antioxidant, anti-inflammatory, and antibacterial activities. Taken together, our measurements suggest that R. prostrata Poir. is a prime candidate for further exploration as a potential therapeutic agent.     

Electrochemical detection of perchloroethylene using differential pulse voltammetry

We demonstrate the application of differential pulse voltammetry (DPV) for the electrochemical detection of perchloroethylene (PCE) on an unmodified glassy carbon electrode surface. Detection sensitivity was substantially improved using DPV, in which dechlorination was denoted by a cathodic peak observed at approximately − 0.6 V (vs Ag/AgCl). Peak current intensity was found to correlate linearly with concentration over a tested range of 0 to 10 μM. The utility of this technique was subsequently evaluated for PCE-spiked environmental samples containing either Methylobacterium adhaesivum (1 × 10⁶ cells/mL) or creek water (10% v/v). In all environmental samples, a linear dynamic range was also observed from approximately 0 to 10 μM. The limit of detection was determined to be 0.3 μM in blank buffer, 0.4 μM in bacteria-containing samples and 1.2 μM in creek water samples.     

(Liquid + liquid) equilibria of (water + lactic acid + alcohol) ternary systems

(Liquid + liquid) equilibrium (LLE) measurements of the solubility (binodal) curves and tie-line end compositions were carried out for {water (1) + lactic acid (2) + octanol, or nonanol, or decanol (3)} at T = 298.15 K and 101.3 ± 0.7 kPa. The relative mutual solubility of lactic acid is higher in the water layers than in the organic layers. The reliability of the experimental tie-line data was confirmed by using the Othmer–Tobias correlation. The LLE results for the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Effects of organic acids,amino acids and ethanol on the radio-degradation of patulin in an aqueous model system

The effects of organic acids, amino acids, and ethanol on the radio-degradation of patulin by gamma irradiation in an aqueous model system were investigated. The patulin, dissolved in distilled water at a concentration of 50 ppm, was practically degraded by the gamma irradiation at the dose of 1.0 kGy, while 33% of the patulin remained in apple juice. In the aqueous model system, the radio-degradation of patulin was partially inhibited by the addition of organic acids, amino acids, and ethanol. The proportions of remaining patulin after irradiation with the dose of 1.0 kGy in the 1% solution of malic acid, citric acid, lactic acid, acetic acid, ascorbic acid, and ethanol were 31.4%, 2.3%, 31.2%, 6.1%, 50.8%, and 12.5%, respectively. During 30 days of storage, the remaining patulin was reduced gradually in the solution of ascorbic acid and malic acid compared to being stable in other samples. The amino acids, serine, threonine, and histidine, inhibited the radio-degradation of patulin. In conclusion, it was suggested that 1 kGy of gamma irradiation (recommended radiation doses for radicidation and/or quarantine in fruits) is effective for the reduction of patulin, but the nutritional elements should be considered because the radio-degradation effects are environment dependent.     

Gas Chromatography-Mass Spectroscopic,high performance liquid chromatographic and In-silico characterization of antimicrobial and antioxidant constituents of Rhus longipes (Engl)

Rhus longipes is one of those underutilized plant species with inherent values. Therefore, we conducted a phytochemical study and investigated the antioxidant and antimicrobial potentials of the plant extracts. Aqueous and ethanol extract was subjected to phytochemical analysis. Gas chromatography-mass spectroscopy was performed to identify the volatile compounds while high performance liquid chromatography was done to identify the phenolic and flavonoids in the ethanol extract. Bioactivity and molecular docking analysis was also done for the identification of the bioactive constituents. Tannins, flavonoids, phenolics, terpenoids, steroids, alkaloids, and saponins were identified both in the ethanol and in aqueous extracts of R. longipes. The extracts and ascorbic acid exhibited radical inhibition in a concentration dependent manner. The IC₅₀ values; 3.23, 4.13, 70.75 µg/mL (ABTS), 200.82, 103.63, 390.83 µg/mL (DPPH), 10.06, 93.46, 253.26 µg/mL (O₂), and 99.77, 109.23, 446.34 µg/mL (NO) for ascorbic acid, ethanol and aqueous extract respectively showed that ethanol extract exhibited better radical inhibition than the aqueous extract. 4-hydroxybenzoic and 4-hydroxycoumarin were the most abundant phenolics in the extract. The ethanol extract of R. longipes demonstrated broad-spectrum antibacterial activity with inhibition zone of 25.5 mm against S. aureus, 27.5 mm against E. coli, and 20.5 mm against P. aeruginosa. The identified phytochemicals demonstrated inhibitory potentials against bacterial glucosamine 6-phosphate synthase, penicillin-binding protein 3, DNA gyrase and β-lactamase. It is evident that R. longipes have some antioxidant and antibacterial properties and the plant contain important phytochemicals with ability to retard food oxidation and deterioration and thus could be annexed for various industrial and medicinal purposes.     

Bioinspired synthesis of pure massicot phase lead oxide nanoparticles and assessment of their biocompatibility,cytotoxicity and in-vitro biological properties

Green and ecofriendly route for biosynthesis of lead oxide nanoparticles has been successfully demonstrated using aqueous leaf extracts of Sageretia thea (Osbeck.). Biosynthesized PbO (∼27 nm) nanoparticles were extensively characterized using XRD, FTIR, Raman, EDS etc. Morphology was studied through HR-TEM/SEM. As synthesized nanoparticles were investigated for their iv-vitro biological properties. Antibacterial activities revealed enhancement upon modulation by UV in a concentration dependent manner. Pseudomonas aeruginosa was found to be the most resistant strain (MIC = 250 µg/mL and MIC^uv = 31.25 µg/ml). MTT cytotoxicity on leishmania promastigotes and amastigotes revealed significant inhibition as indicated by their IC₅₀ values of 14.7 µg/mL and 11.95 µg/m respectively. Cytotoxicity was also confirmed using brine shrimp lethality (IC₅₀ = 27.7 µg/mL). Bio-compatibility evaluation indicated cytotoxicity to freshly isolated human macrophages (IC₅₀ = 57.1 µg/mL). Insignificant alpha-amylase inhibition and moderate protein kinase inhibition was revealed. Antioxidant activities indicated free radical scavenging activity (58 ± 2.45) at 200 µg/mL. Moderate total reducing power and total antioxidant activity was also indicated. Overall, we conclude lead oxide as a potential candidate for biological applications, however further studies are recommended on their in vitro and in vivo cytotoxicity.     

Thermal stability of fatty acids in subcritical water

In this work, hydrolytic reaction conditions of various temperatures (300–370 °C) and times (0–30 min) at a constant pressure of 20 MPa were applied to the thermal decomposition of three kinds of fatty acids (FAs), stearic acid, oleic acid, and linoleic acid, in subcritical water. The degradation characteristics were investigated from the derived data, and the thermal stability of FAs in subcritical water was estimated. The primary reactions we observed were isomerization and pyrolysis of FAs. The main pathway of degradation was deduced by analyzing the contents of pyrolyzed products. We found that more saturated FAs have greater thermal stability in subcritical water. All FAs remained stable at 300 °C or below. Based on these results, we recommend that hydrolysis of vegetable oils and fats using subcritical water should be carried out below 300 °C (at 20 MPa) and for less than 30 min to obtain high-yield FA production.     

Effect of gamma radiation on the mechanical and barrier properties of HEMA grafted chitosan-based films

Chitosan films were prepared by dissolving 1% (w/v) chitosan powder in 2% (w/v) aqueous acetic acid solution. Chitosan films were prepared by solution casting. The values of puncture strength (PS), viscoelasticity coefficient and water vapor permeability (WVP) of the films were found to be 565 N/mm, 35%, and 3.30 g mm/m² day kPa, respectively. Chitosan solution was exposed to gamma irradiation (0.1–5 kGy) and it was revealed that PS values were reduced significantly (p≤0.05) after 1 kGy dose and it was not possible to form films after 5 kGy. Monomer, 2-hydroxyethyl methacrylate (HEMA) solution (0.1–1%, w/v) was incorporated into the chitosan solution and the formulation was exposed to gamma irradiation (0.3 kGy). A 0.1% (w/v) HEMA concentration at 0.3 kGy dose was found optimal-based on PS values for chitosan grafting. Then radiation dose (0.1–5 kGy) was optimized for HEMA grafting. The highest PS values (672 N/mm) were found at 0.7 kGy. The WVP of the grafted films improved significantly (p≤0.05) with the rise of radiation dose.     

Trace Cd,Co, and Pb elements distribution during Sulcis coal pyrolysis: GFAAS determination with slurry sampling technique

A simple and fast method based on graphite furnace atomic absorption spectrometry (GF AAS) and slurry sampling technique (SlS) was developed to determine trace Cd, Co and Pb in high-sulphur coal (Sulcis, Italy) and coal chars derived at 600, 750 and 950 °C under N₂ atmosphere for developing a clean coal for electricity production. The proposed method was then coupled to a four-step sequential chemical extraction method for assessment of metals distribution in coaled samples. The slurries were prepared by varying sample mass (1–50 mg), volume (1–3 mL) and kind of dispersing medium (1% v/v Triton X-100 and 2 N HNO₃), and sonication time (5–30 min). Pyrolysis/atomization temperatures as well carrier gas flow rate were optimised. Pd(NO₃)₂ and NH₄H₂PO₄ were employed to stabilize Cd and Pb, respectively, in the pyrolysis stage of furnace program. The use of HNO₃ as dispersing agent was found to be effective in lowering the high level of background absorption on the Cd analytical signal produced by raw coal matrix. Conversely, coal charred samples did not show significantly level of background interferences, so that Triton X-100 dispersing agent could be used for all analytes. Calibration curve against acid-matched standards was allowed for Cd, whereas the standard addition calibration was used for Co and Pb owing to chemical matrix interferences. The precision, expressed as relative standard deviation (% RSD, n = 5), was better than 5% for Cd, Co, and Pb at 1, 10, and 15 μg L^? 1 levels, respectively. The accuracy of the analytical method was checked by analyzing a BCR No. 182 steam coal certificated reference material and the results were in good agreement with certificated and informed values. The solid detection limits (3σ_blank) were as low as 0.001 Cd, 0.01 Co, and 0.01 Pb mg kg^? 1, using 30 mg sample mass and slurry concentration of 30 m v^? 1 for Cd, and 50 mg sample mass and 50 m v^? 1 slurry concentration for Co and Pb. The content of elements in Sulcis coal was found to be 0.33 Cd, 4.0 Co, and 3.8 Pb mg kg^? 1 and mostly associated to sulphates and di-sulphides as indicated by the leaching test. Under pyrolysis conditions Cd significantly volatilised (about 64%) at temperature higher than 600 °C, whereas residue chars at 950 °C are enriched in Co and Pb up to 20%. The proposed method is suitable for routine metals monitoring in coaled samples.     

Stability-indicating liquid chromatography for determination of clopidogrel bisulfate in tablets: Application to content uniformity testing

The present study describes a simple stability-indicating reversed-phase HPLC assay for antiplatelet drug, clopidogrel bisulfate. Separation of the drug and the degradation products, under stress conditions was successfully achieved on a C-18 column utilizing 0.01 M Na₂HPO₄ (pH 4): acetonitrile in the ratio 80:20 v/v, pumped at a flow rate of 0.5 ml min^?1 with UV detection at 235 nm. The retention time of clopidogrel was 6.84 min. The method was satisfactorily validated with respect to linearity, precision, accuracy, selectivity, sensitivity and ruggedness. The response was linear in the range of 0.2–3.5 μg ml^?1 with detection limit 0.079 μg ml^?1. The suggested method was successfully applied for the analysis of clopidogrel in bulk and in commercial tablets. The results were favorably compared to those obtained by a reference method. The proposed method was successfully applied to the content uniformity testing of tablets and for determination of clopidogrel in presence of its co-administered drug, acetyl salicylic acid.     

Protic ionic liquids as recyclable solvents for the acid catalysed synthesis of diphenylmethyl thioethers

The acid catalysed formation of diphenylmethyl (DPM) thioethers was successfully achieved using the protic ionic liquid (pIL) triethylamine:methanesulfonic acid (TeaMs) as the reaction solvent under microwave irradiation. A slight excess of methanesulfonic acid (10% v/v) was required to facilitate the reaction, which was applied to a variety of thiols. Aliphatic, aromatic and heterocyclic aromatic thiols were converted to their corresponding DPM thioethers in high yields (63–99%), in short reaction times (5–20 min) and using mild temperatures (80–100 °C). Finally, the pIL (TeaMS) was recycled five times without loss of yield.