Electrical conduction in Fe2O3 and Cr2O3

The influence of some impurities on the conduction properties of Cr₂O₃ and Fe₂O₃ are examined and contrasted. A mechanism is proposed to account for the effect of Ti in Cr₂O₃.     

Electrical conductivity in TlI-TiO2 composite solid electrolyte

Composite materials of formula (1−x)TlI−xTiO₂, x=0-0.7, have been prepared and studied by X-ray diffraction, differential scanning calorimetry, scanning electron microscopy and electrical conductivity. The materials were found to be binary phase systems with titania particles distributed between the grains of thallium iodide. The electrical conductivity got enhanced in the composition range x=0.1-0.5 and then decreased with further increase in the titania content. The behaviour is explained in terms of disordering phenomena at the interface regions and space-charge layers formed in the bulk grains of thallium iodide. Moreover, the increased content of titania in the system leads to the disappearance of order-disorder (β-α) phase transition in thallium iodide, which is usually observed in the pure compound. This behaviour was explained by the stabilizing effect of β-phase at high temperatures and at higher contents of titania. X-ray diffractograms do not show any indication to the presence of α-phase at ambient temperature, i.e. the phase could not be stabilized in the investigated system.     

A higher conductivity Bi2O3-based electrolyte

We have developed a Bi₂O₃ electrolyte doped with Dy₂O₃ and WO₃ (DyWSB) that exhibits a higher conductivity than that of 20 mol% erbia stabilized bismuth oxide (20ESB), thus, giving it the highest conductivity of any known solid oxide electrolyte. Electrical conductivity results of the Dy–W stabilized bismuth oxide system are presented. The dopants were selected based on their polarizability and its effect on structural stability and conductivity. At 800 °C, the conductivity of (BiO_1.5)_0.88(DyO_1.5)_0.08(WO₃)_0.04 is 0.57 S/cm (1.5 times as high as that of 20ESB), and at 500 °C, the conductivity is 0.043 S/cm (2 times as high as that of 20ESB).     

Electrical conductivity of MgCO3 at high pressures and high temperatures

The electrical conductivity of polycrystalline magnesite (MgCO₃) was measured at 3-6 GPa at high temperatures using complex impedance spectroscopy in a multi-anvil high-pressure apparatus. The electrical conductivity increased with increasing pressure. The activation enthalpy calculated in the temperature range 650-1000 K also increased with increasing pressure. The effect of pressure was interpreted as being the activation volume in the Arrhenius equation, and the fitted data gave an activation energy and volume of 1.76±0.03 eV and −3.95±0.78 cm³/mole, respectively. The negative activation volume and relatively large activation energy observed in this study suggests that the hopping of large polarons is the dominant mechanism for the electrical conductivity over the pressure and temperature range investigated.     

A neutron total scattering study of defect structure in Bi3Nb0.5Y0.5O6.5

The defect structure of the title compound has been analyzed by reverse Monte Carlo (RMC) modeling of neutron total scattering data. The composition exhibits both diffuse scattering and weak superlattice ordering of the cubic fluorite subcell in neutron diffraction patterns. Combined Rietveld analysis of X-ray and neutron data at room temperature reveals oxide ion scattering on three crystallographic sites. Analysis of the RMC model reveals Bi coordination numbers consistent with stereochemical activity of the Bi 6 s² lone pair electrons. Integration of the O-M-O angular distribution function gives an angular ratio consistent with predominantly < 110> vacancy ordering in this system.     

Effect of WO3 on EPR, structure and electrical conductivity of vanadyl doped WO3·M2O·B2O3 (M=Li, Na) glasses

Glasses with composition xWO₃·(30−x)M₂O·70B₂O₃ (M=Li, Na; 0≤x≤15) doped with 2 mol% V₂O₅ have been prepared using the melt-quench technique. The electron paramagnetic resonance spectra have been recorded in X-band (ν≈9.14 GHz) at room temperature (RT). The spin Hamiltonian parameters, dipolar hyperfine coupling parameter and Fermi contact interaction parameter have been calculated. It is observed that the resultant resonance spectra contain hyperfine structures (hfs) only due to V⁴⁺ ions, which exist as VO²⁺ ions in octahedral coordination with a tetragonal compression in the present glass system. The tetragonality increases with WO₃:M₂O ratio and also there is an expansion of 3d_xy orbit of unpaired electron in the vanadium ion. The study of IR transmission spectra over a range 400-4000 cm⁻¹ depicts the presence of WO₆ group. The DC conductivity (σ) has been measured in the temperature range 423-623 K and is found to be predominantly ionic.     

Magnetic and structural studies of Cr2O5 and Cr3O8

The infrared spectra, indexed X-ray powder diffraction patterns, magnetic susceptibilities between 80 and 300 K, and electron paramagnetic resonance spectra at 80 and 300 K are reported for Cr₂O₅ and Cr₃O₈. The results indicate that both oxides are Cr³⁺/Cr⁶⁺ mixed-valence compounds which contain CrO₆ octahedra and CrO₄ tetrahedra in different ratios. The valence formula for Cr₂O₅ is Cr³⁺₂Cr⁶⁺₄O₁₅ and that of Cr₃O₈ is Cr³⁺₂Cr⁶⁺₇O₂₄. The X-ray powder data for Cr₂O₅ and Cr₃O₈ could be indexed on the basis of a monoclinic unit cell $\text{(a = 12.01(2), b = 8.52(1), c = 9.39(1)}\text{A}\text{?}\text{β = 92.0(1)°)}$ and an orthorhombic unit cell $\text{(a = 12.01(7), b = 36.60(7) and c = 3.82(1)}\text{A}\text{?}\text{)}$, respectively.     

Effect of ZnO/CdO on the structure and electrical conductivity in Li2O·MO·Bi2O3·B2O3 glasses (M=Zn, Cd)

Studies of structural and electrical properties have been carried out on a number of glasses with wide ranging compositions in the glass systems Li₂O·MO·Bi₂O₃·B₂O₃ (where M=Zn or Cd), in order to understand the effect of transition metal (TM) ions on the structure of these glasses. The density and molar volume measurements have also been made to understand the structural changes occurring in these glasses. The dc conductivity measured in the temperature range 423-623 K obeys Arrhenius law. It increases with increase in Li₂O/MO ratio. The results of infrared spectra indicate that TM ions (Zn²⁺ or Cd²⁺) behave as network former in the present system. Boron exists in both tri- and tetra-hedral units in these glasses and no boroxol ring formation takes place in the glass structure. Values of theoretical optical basicity have also been reported.     

Influence of Al2O3 additions on crystallization mechanism and conductivity of Li2O-Ge2O-P2O5 glass-ceramics

The crystallization mechanism and conductivity of lithium aluminum germanium phosphate [LAGP] glass-ceramics fabricated from Li_1+xAl_xGe_2−x(PO₄)₃ (x=0.0-0.7) glass system were investigated as a function of Al₂O₃ additions. A non-isothermal analysis was performed to study the crystallization behavior of LAGP glass-ceramics at various heating rates (5-25K min⁻¹) by the Kissinger equation and the Augis-Bennett equation, illustrating volume crystallization for the glass-ceramics. The crystal identification and microstructure in glass-ceramics containing various Al₂O₃ contents were analyzed by means of XRD and FESEM. The main phase of the glass-ceramics was found to be LiGe₂(PO₄)₃, with AlPO₄ as the impurity phase. Additionally the highest total ionic conductivity (5.8×10⁻⁴ S/cm) at room temperature was obtained when x=0.5 for Li_1+xAl_xGe_2−x(PO₄)₃ (x=0.0-0.7) glass-ceramics, suggesting that it was a promising electrolyte for practical application in all-solid-state lithium batteries.     

Electrical conductivity and amorphization of Sc2(WO4)3 at high pressures and temperatures

Impedance spectroscopy measurements and synchrotron X-ray diffraction studies of Sc₂(WO₄)₃ at 400°C have been carried out as a function of pressure up to 4.4 GPa. Ionic conductivity shows normal decrease with increase in pressure up to 2.9 GPa, but then increases at higher pressures. The XRD results show that Sc₂(WO₄)₃ undergoes pressure-induced amorphization at pressures coincident with the reversal in conductivity behavior. The loss of crystal structure at high pressure is consistent with growing evidence of pressure-induced amorphization in negative thermal expansion materials, such as Sc₂(WO₄)₃. The increase in conductivity in the amorphized state is interpreted as the result of an increase in structural entropy and a concomitant reduction of energy barriers for ionic transport.     

Study of phase transition in ZrO2 doped with Pb3O4

Electrical conductivity of ZrO₂ doped with Pb₃O₄ has been measured at different temperatures for different molar ratios (x=0, 0.01, 0.02, 0.03, 0.04, 0.05 and 0.06). The conductivity increases due to migration of vacancies, created by doping. The conductivity increases with increase in temperature till 180 °C and thereby decreases due to collapse of the fluorite framework. A second rise in conductivity at higher temperatures beyond 500-618 °C is due to phase transition of ZrO₂. DTA and X-ray powder diffraction were carried out for confirming doping effect and transition in ZrO₂.The addition of Pb₃O₄ to ZrO₂ shifted the phase transition of ZrO₂ due to the interaction between Pb₃O₄ and ZrO₂.     

Structural and impedance properties of Ca3Nb2O8 ceramics

Polycrystalline sample of Ca₃Nb₂O₈ was prepared by a high-temperature solid-state reaction technique. X-ray diffraction (XRD) analysis confirms the formation of single-phase compound of hexagonal (rhombohedral) crystal structure at room temperature. Scanning electron micrograph of the material showed uniform grain distribution on the surface of the sample. Detailed studies of dielectric properties of the compound, studied in a wide frequency range (10²-10⁶ Hz) at different temperatures (25-500 °C), exhibit a dielectric anomaly suggesting phase transition of ferroelectric-paraelectric and structural type at 300 °C. Electrical properties of the material were analyzed using a complex impedance technique. The Nyquists plot showed the presence of bulk effect in the material in the studied temperature range. Studies of electrical conductivity over a wide temperature range suggest that the compound has negative temperature coefficient of resistance behavior.     

Electrical conductivity of the system Y2O3CeO2

The electrical conductivity of the system Y₂O₃CeO₂ was measured in the temperature range 500–1100°C and P_o2 range 10^–7?10^?1 atm. Possible defect models were suggested on the basis of conductivity data, which were investigated as a function of temperature and of P_o2. The observed activation energies were 0.40 eV and 1.79 eV in the low- and high-temperature regions, respectively. The observed conductivity dependences on P_o2 were in the temperature range 500–750°C and at temperatures from 750–1100°C. It is suggested that the system Y₂O₃CeO₂ shows a mixed ionic plus hole conduction due to an O^″_i defect and an electronic hole conduction due to a V^'''_Y defect in the low- and high-temperature regions, respectively.     

Synthesis and ionic conductivity of new layered perovskite compound, Ag2La2Ti3O10

A new layered perovskite compound, Ag₂La₂Ti₃O₁₀, was synthesized by an ion-exchange reaction of M₂La₂Ti₃O₁₀ (M = Na,K) with a AgNO₃ molten salt. The crystal structure and the ionic conductivity of the ion-exchanged compound were investigated. The ionic conductivities attributed to the interlayer silver ions were observed at high temperatures. The ionic conductivity of Ag₂La₂Ti₃O₁₀ was much higher than that of Na₂La₂Ti₃O₁₀, while the interlayer sodium ions in Na₂La₂Ti₃O₁₀ and silver ions in Ag₂La₂Ti₃O₁₀ have almost the same rock-salt type coordination. The higher conductivity of Ag₂La₂Ti₃O₁₀ is probably due to the higher polarizability of silver ions.     

Effect of chloride doping concentration on enhancement of protonic conductivity of mesoporous Al2O3

Mesoporous Al₂O₃ was prepared by a sol-gel method with doping different amount of LaCl₃. The proton conductivity of mesoporous Al₂O₃ increased with increasing the doping concentration up to the optimum doping, 0.1 Cl/Al mole ratio. The surface acidities of different samples were investigated by NH₃-TPD method. The change trends of surface acidity are consistent with that of proton conductivity. It indicates that the proton conductivity of mesoporous Al₂O₃ can be increased by enhancing its surface acidity via the chloride doping.     

Electrical conductivity and chemical diffusion in Perovskite-type proton conductors in H2-H2O gas mixtures

The electrical conductivities of SrZr_0.9Y_0.1O_3-δ (SZY10) and BaCe_0.95Y_0.05O_3-δ(BCY5) were measured as a function of hydrogen partial pressure P(H₂), oxygen partial pressure P(O₂), steam partial pressure P(H₂O) and temperature. Their relaxation processes were analyzed using the solution of Fick's diffusion equation to determine the chemical diffusion coefficients and surface reaction rate constants. There were the differences in chemical relaxation kinetics and the conductivity dependence on P(H₂O) between the both oxides. The chemical diffusion coefficients depend on temperature but are essentially independent of P(H₂), P(O₂) and P(H₂O). The ambipolar diffusion treatment can explain the temperature dependence of chemical diffusion coefficients quantitatively. The chemical diffusion coefficients of SZY10 is one or two order of magnitude smaller than those of BCY5 at low temperature. The sluggish conductivity relaxation in SZY10 was due to considerably small oxygen vacancy diffusion coefficients at low temperatures. The total conductivity depends on P(H₂O) in the case of SZY10, but not for BCY5. This different dependence on P(H₂O) is caused by the difference in the ratio between proton mobility and oxide-ion mobility.     

Crystal structure, electrical and magnetic properties of La1 − xSrxCoO3 − y

The crystal structure and properties of La_{1 − x}Sr_xCoO_{3 − y} with strontium contents ranging from x = 0.1 to x = 0.7 have been studied. The lattice parameters were measured as a function of temperature (4.2–400 K) and the crystal structure was found to change from rhombohedral (at low temperatures and values of x) to cubic. While LaCoO₃ is paramagnetic the oxides in the composition range 0.2 < x < 0.6 are soft ferromagnets. The strontium additions are compensated by the formation of Co⁴⁺ (cobalt ions with one positive effective charge, Co_Co^.) and oxygen vacancies (V_o^..). From the results it is concluded that the relative importance of oxygen vacancies increases with increasing temperature and decreasing oxygen activity. As a result the concentration of electronic charge carriers — and the resultant electrical conductivity — decrease with increasing temperature. The defect structure is discussed and it is concluded that defect associations — probably between oxygen vacancies and strontium ions — and formation of microdomains of perovskite-related phases are important aspects of the overall structure of these perovskite phases.     

W形六角铁氧体BaFe18O27电子结构与导电性的第一性原理研究

采用基于第一性原理的GGA+U方法研究了BaFe₁₈O₂₇的晶体结构和基态电子结构. 以实验数据为初始结构的离子弛豫显示,由于稳定结构中离子半径的差异和2d位Fe的存在,位于BaO层中6h位的O离子脱离了实验结构中原胞的"表面"位置,产生畸变. 计算得到晶体磁矩为28 μ_B/f.u.,与实验相符. 电子态密度及能带计算表明该材料具有微弱的半金属特性,而且与c轴平行方向和垂直方向的能带色散关系有着很大不同,6g位Fe在该材料的输运特性中起着关键作用,它们形成一种"导电层",导致垂直电导率和平行电导率出现非常大的差异. 关键词： 第一性原理 W形六角铁氧体 电子结构 导电性     

Anisotropy of the electrical conductivity in W-type hexagonal ferrites BaFe18O27 and BaCo2Fe16O27 from first principles

The electronic ground structure and the anisotropy of the electrical conductivity in W-type hexagonal ferrite BaFe₁₈O₂₇ and BaCo₂Fe₁₆O₂₇ have been investigated using the generalized gradient approximation (GGA) plus Hubbard U (GGA+U) calculation. In BaFe₁₈O₂₇, because of the presence of mixed valence states at Fe 6g sites, a half metallic peak appears in energy gap and it results in an “electrical conductive layer”. Using a model in which Fe at 6g sites is assumed to be partially replaced by Co, the electronic ground structure of BaCo₂Fe₁₆O₂₇ and the origin of the electrical conductive anisotropy have been studied. Replacement of Fe at 6g site of BaFe₁₈O₂₇ by Co causes the mixed valence states of Fe cations at 6g sites to vanish and the carrier density to lower. Also, it is shown that effective mass of carrier along c axis is much heavier than that perpendicular to c axis in both of materials from electronic energy band calculation. This is the reason why the electrical resistivities of both materials along c axis are much higher than that perpendicular to axis.     

Physical studies on composites Ag7I4VO4-Al2O3

The electrical properties of the solid electrolytes Ag₇I₄VO₄-Al₂O₃ (0-40 mol% Al₂O₃) are investigated. The electrical conductivity, dielectric constant and dielectric loss are increased by increasing the concentration of Al₂O₃; showing a maximum at 30 mol% Al₂O₃. The conductivity is found to be increased by decreasing the particle size of Al₂O₃. The results are explained using the random resistor network model (RRN). This is due to the formation of a highly conducting interface layer along the matrix-particle interface. This layer is destroyed at concentrations higher than 30 mol% Al₂O₃.