A DNA hybridization detection based on fluorescence resonance energy transfer between dye-doped core-shell silica nanoparticles and gold nanoparticles

A novel and efficient method to evaluate the DNA hybridization based on a fluorescence resonance energy transfer (FRET) system, with fluorescein isothiocyanate (FITC)-doped fluorescent silica nanoparticles (SiNPs) as donor and gold nanoparticles (AuNPs) as acceptor, has been reported. The strategy for specific DNA sequence detecting is based on DNA hybridization event, which is detected via excitation of SiNPs-oligonucleotide conjugates and energy transfer to AuNPs-oligonucleotide conjugates. The proximity required for FRET arises when the SiNPs-oligonucleotide conjugates hybridize with partly complementary AuNPs-oligonucleotide conjugates, resulting in the fluorescence quenching of donors, SiNPs-oligonucleotide conjugates, and the formation of a weakly fluorescent complex, SiNPs-dsDNA-AuNPs. Upon the addition of the target DNA sequence to SiNPs-dsDNA-AuNPs complex, the fluorescence restores (turn-on). Based on the restored fluorescence, a homogeneous assay for the target DNA is proposed. Our results have shown that the linear range for target DNA detection is 0-35.0 nM with a detection limit (3σ) of 3.0 picomole. Compared with FITC-dsDNA-AuNPs probe system, the sensitivity of the proposed probe system for target DNA detection is increased by a factor of 3.4-fold.     

Inhibition assay of biomolecules based on fluorescence resonance energy transfer (FRET) between quantum dots and gold nanoparticles

An inhibition assay method was developed based on the modulation in the FRET efficiency between quantum dots (QDs) and gold nanoparticles (AuNPs) in the presence of the molecules which inhibit the interactions between QD- and AuNP-conjugated biomolecules. For the functionalization, AuNPs were first stabilized by chemisorption of n-alkanethiols and then capped with the first generation polyamidoamine (G1 PAMAM) dendrimers. By employing a streptavidin-biotin couple as a model system, avidin was quantitatively analyzed as an inhibitor by sensing the change in photoluminescence (PL) quenching of SA-QDs by biotin-AuNPs. The detection limit for avidin was about 10 nM. It is anticipated that the PL quenching-based sensing system can be used for the quantitative analysis and high throughput screening of molecules which inhibit the specific biomolecular interactions.     

Continuous-flow protease assay based on fluorescence resonance energy transfer

A homogeneous continuous-flow assay using fluorescence resonance energy transfer (FRET) for detection was developed to measure the hydrolysis of HIV Protease Substrate 1 (to which two choromophores, EDANS and DABCYL are covalently attached) by a protease (e.g. Subtilisin Carlsberg) and the influence of inhibitors. In the continuous-flow assay, an inhibitor solution and an enzyme solution were first eluted into the system and allowed to react with each other in a reaction coil. Subsequently, the substrate solution was added to an enzyme-inhibitor mixture in a second reaction coil and incubated for 1 min. Finally, the fluorescence intensity was monitored.The system was also utilized to measure the inhibition of the protease by two weak acidity inhibitors which are 4-(2-aminoethyl)benzenesulfonyl fluoride hydrochloride (AEBSF) and ethylenediaminetetraacetic acid (EDTA). Using the obtained optimum conditions for AEBSF, a detection limit of 0.3 mmol/l was achieved and the relative standard deviation was below 3.7% in the 2.5-7.5 mmol/l range. For EDTA, which required a 20 times higher substrate concentration than AEBSF, a detection limit of 0.2 mmol/l was obtained and the relative standard deviation was below 9.6% in the 0.5-7.5 mmol/l range.The optimization of pH, substrate concentration, enzyme concentration, reaction time and temperature are described. Organic modifier effects were also investigated. Methanol, acetonitrile and DMSO could be tolerated up to 30%.     

Label-free detection of adenosine based on fluorescence resonance energy transfer between fluorescent silica nanoparticles and unmodified gold nanoparticles

A sensitive and convenient strategy was developed for label-free assay of adenosine. The strategy adapted the fluorescence resonance energy transfer property between Rhodamine B doped fluorescent silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) to generate signal. The different affinities of AuNPs toward the unfolded and folded aptamers were employed for the signal transfer in the system. In the presence of adenosine, the split aptamer fragments react with adenosine to form a structured complex. The folded aptamer cannot be adsorbed on the surface of AuNPs, which induces the aggregation of AuNPs under high ionic concentration conditions, and the aggregation of AuNPs leads to the decrease of the quenching ability. Therefore, the fluorescence intensity of Rhodamine B doped fluorescent SiNPs increased along with the concentration of adenosine. Because of the highly specific recognition ability of the aptamer toward adenosine and the strong quenching ability of AuNPs, the proposed strategy demonstrated good selectivity and high sensitivity for the detection of adenosine. Under the optimum conditions in the experiments, a linear range from 98 nM to 100 μM was obtained with a detection limit of 45 nM. As this strategy is convenient, practical and sensitive, it will provide a promising potential for label-free aptamer-based protein detection.     

Homogeneous non-competitive bioaffinity assay based on fluorescence resonance energy transfer

A homogeneous non-competitive assay principle for measurement of small analytes based on quenching of fluorescence is described. Fluorescence resonance energy transfer (FRET) occurs between the donor, intrinsically fluorescent europium(III)-chelate conjugated to streptavidin, and the acceptor, quencher dye conjugated to biotin derivative when the biotin-quencher is bound to Eu-streptavidin. Fluorescence can be measured only from those streptavidins that are bound to biotin of the sample, while the fluorescence of the streptavidins that are not occupied by biotin are quenched by quencher-biotin conjugates. The quenching efficiencies of the non-fluorescent quencher dyes were over 95% and one dye molecule was able to quench the fluorescence of more than one europium(III)-chelate. This, however, together with the quadrovalent nature of streptavidin limited the measurable range of the assay to 0.2-2 nmol L⁻¹. In this study we demonstrated that FRET could be used to design a non-competitive homogeneous assay for a small analyte resulting in equal performance with competitive heterogeneous assay.     

A competitive displacement assay with quantum dots as fluorescence resonance energy transfer donors

The unique optoelectronic properties of semiconductor quantum dots (QDs) make them well-suited as fluorescent bioprobes for use in various biological applications. Modification of CdSe/ZnS QDs with biologically relevant molecules provides for multipotent probes that can be used for cellular labeling, bioassays, and localized optical interrogation by means of fluorescence resonance energy transfer (FRET). Herein, we demonstrate the use of red-emitting streptavidin-coated QDs (QD₆₀₅) as donors in FRET to introduce a competitive displacement-based assay for the detection of oligonucleotides. Various QD–DNA bioconjugates featuring 25-mer probe sequences diagnostic of Hsp23 were prepared. The single-stranded oligonucleotide probes were hybridized to dye-labeled (Alexa Fluor 647) reporter sequences, which were provided for a FRET-sensitized emission signal due to proximity of the QD and dye. The dye-labeled sequence was designed to be partially complementary and include base-pair mismatches to facilitate displacement by a more energetically favorable, fully complementary recognition motif embedded within a 98-mer displacer sequence. Overall, this study demonstrates proof-of-concept at the nM level for competitive displacement hybridization assays in vitro by reduction of fluorescence intensity that directly correlates to the presence of oligonucleotides of interest. This work demonstrates an analytical method that could potentially be implemented for monitoring of intracellular gene expression in the future.     

Molecular distribution sensing in a fluorescence resonance energy transfer based affinity assay for glucose

A newly developed method for determining molecular distribution functions is applied to a widely researched glucose affinity sensor. The reduction in fluorescence resonance energy transfer (FRET) to a malachite green (MG)-dextran complex from allophycocyanin (APC) bound to concanavalin A (ConA) due to displacement of the complex by glucose from ConA provides the basis of the assay. The higher sensitivity and specificity of a new approach to fluorescence decay analysis, over the methods based on conventional Forster-type models, is demonstrated and critical parameters in competitive binding FRET sensing derived.     

A high-throughput homogeneous immunoassay based on Förster resonance energy transfer between quantum dots and gold nanoparticles

A novel homogeneous immunoassay based on Förster resonance energy transfer for sensitive detection of tumor, e.g., marker with carcinoembryonic antigen (CEA), was proposed. The assay was consisted of polyclonal goat anti-CEA antibody labeled luminescent CdTe quantum dots (QDs) as donor and monoclonal goat anti-CEA antibody labeled gold nanoparticles (AuNPs) as acceptor. In presence of CEA, the bio-affinity between antigen and antibody made the QDs and AuNPs close enough, thus the photoluminescence (PL) quenching of CdTe QDs occurred. The PL properties could be transformed into the fluorometric variation, corresponding to the target antigen concentration, and could be easily monitored and analyzed with the home-made image analysis software. The fluorometric results indicated a linear detection range of 1–110 ng mL⁻¹ for CEA, with a detection limit of 0.3 ng mL⁻¹. The proposed assay configuration was attractive for carcinoma screening or single sample in point-of-care testing, and even field use. In spite of the limit of available model analyte, this approach could be easily extended to detection of a wide range of biomarkers.     

A boronic acid based glucose assay based on the suppression of the inner filter effect of gold nanoparticles on the orange fluorescence of graphene oxide quantum dots

Microchimica Acta - The authors describe a non-enzymatioc glucose assay that has three features: (a) The use of a boronic acid as the recognition element; (b) the aggregation of gold nanoparticles...     

Single lanthanide-doped oxide nanoparticles as donors in fluorescence resonance energy transfer experiments

We used lanthanide-ion doped oxide nanoparticles, Y(0.6)Eu(0.4)VO(4), as donors in fluorescent resonance energy transfer (FRET) experiments. The choice of these nanoparticles allows us to combine the advantages of the lanthanide-ion emission, in particular the long lifetime and the large Stokes shift between absorption and emission, with the detectability of the nanoparticles at the single-particle level. Using cyanine 5 (Cy5) organic molecules as acceptors, we demonstrated FRET down to the single-nanoparticle level. We showed that, due to the long donor lifetime, unambiguous and precise FRET measurements can be performed in solution even in the presence of large free acceptor concentrations. Highly efficient energy transfer was obtained for a large number of acceptor molecules per donor nanoparticle. We determined FRET efficiencies as a function of Cy5 concentration which are in good agreement with a multiple acceptor-multiple donor calculation. On the basis of the donor emission recovery due to acceptor photobleaching, we demonstrated energy transfer from single-nanoparticle donors in fluorescence microscopy experiments.     

A graphene oxide platform for the assay of biomolecules based on chemiluminescence resonance energy transfer

The bifunctionality of graphene oxide (GO) that can highly adsorb single-stranded DNA (ssDNA) and effectively quench the emission of organic dyes is reasonably utilized in a chemiluminescence resonance energy transfer (CRET) system, achieving sensitive and selective detection of DNA (H1V1) and protein (thrombin), respectively.     

Chemiluminescent detection of cell apoptosis enzyme by gold nanoparticle-based resonance energy transfer assay

We report a new chemiluminescence resonance energy transfer (CRET) technique, using gold nanoparticles (AuNPs) as efficient energy acceptor, for homogeneous measurement of cell apoptosis enzyme with high sensitivity. In the design of the CRET system, we chose the highly sensitive chemiluminescence (CL) reaction between luminol and hydrogen peroxide catalysed by horseradish peroxidase (HRP) because the CL spectrum of luminol (λ _max 425 nm) partially overlaps the visible absorption bands of AuNPs. In this system, the peptide substrate (DEVD) of caspase 3 was linked to the AuNP surface by Au–S linkage. HRP was attached to the AuNP surface by means of a bridge formed by the streptavidin–biotin reaction. CRET occurred as a result of formation of AuNP–peptide–biotin–streptavidin–HRP complexes. The CL of luminol was significantly reduced, because of the quenching effect of AuNPs. The quenched CL was recovered after cleavage of DEVD by caspase 3, an enzyme involved in the apoptotic process. Experimental conditions were systematically investigated. Under the optimum conditions the increase of the CL signal was linearly dependent on caspase 3 concentration within the concentration range 25 pmol L^?1 to 800 pmol L^?1 and the detection limit of caspase 3 was as low as 20 pmol L^?1, one order of magnitude lower than for FRET sensors based on graphene oxides. Our method was successfully used to detect drug-induced apoptosis of cells. This approach is expected to be extended to other assays, i.e., using other enzymes, analytes, CL substances, and even other nanoparticles (e.g., quantum dots and graphene). Fig. a

?     

Sensitive turn-on fluorescent detection of tartrazine based on fluorescence resonance energy transfer

We introduce a sensitive, rapid, label-free and general fluorescent method for the determination of tartrazine by competitive binding to reduced graphene oxide (rGO) against fluorescein, and the fluorescence recovery upon fluorescein desorption from rGO provides a quantitative readout for tartrazine, giving a detection limit of 0.53 ng mL(-1).     

Sensitive turn-on fluorescent detection of melamine based on fluorescence resonance energy transfer

We here report a novel fluorescent method for the detection of melamine based on the high fluorescence quenching ability of gold nanoparticles. The fluorescence was significantly quenched via fluorescence resonance energy transfer when fluorescein molecules were attached to the surface of gold nanoparticles by electrostatic interaction. Upon addition of melamine, the fluorescence was enhanced due to the competitive adsorption of gold nanoparticles between melamine and fluorescein. Under the optimum conditions, the fluorescence enhancement efficiency [(I-I(0))/I(0)] showed a linear relationship with the concentration of melamine in the range of 1.0 × 10(-7) mol L(-1)~4.0 × 10(-6) mol L(-1), and the detection limit was calculated to be 1.0 × 10(-9) mol L(-1). The proposed method showed several advantages such as high sensitivity, short analysis time, low cost and ease of operation.     

量子点荧光共振能量转移检测赭曲霉毒素A

基于量子点与荧光猝灭基团之间构成的荧光共振能量转移体系,以量子点标记赭曲霉毒素A适配体与荧光猝灭基团标记的补体杂交构成荧光传感探针,当有赭曲霉毒素A存在时,由于其适配体与赭曲霉毒素A的高度亲和作用,使传感探针上结合的荧光猝灭剂减少,荧光增强,从而建立了一种检测赭曲霉毒素A的荧光分析方法.该方法简单、快速、特异性强,在适...