A study of the electrochemical behavior of an oxadiazole derivative electrodeposited on multi-wall carbon nanotube-modified electrode and its application as a hydrazine sensor

In this study, an oxadiazole multi-wall carbon nanotube-modified glassy carbon electrode (OMWCNT?GCE) was used as a highly sensitive electrochemical sensor for hydrazine determination. The surface charge transfer rate constant, k _s, and the charge transfer coefficient, ??, for electron transfer between GCE and electrodeposited oxadiazole were calculated as 19.4?±?0.5?s^?1 and 0.51, respectively at pH?=?7.0. The obtained results indicate that hydrazine peak potential at OMWCNT?GCE shifted for 14, 109, and 136?mV to negative values as compared with oxadiazole-modified GCE, MWCNT?GCE, and activated GCE surface, respectively. The electron transfer coefficient, ??, and the heterogeneous rate constant, k??, for the oxidation of hydrazine at OMWCNT?GCE were also determined by cyclic voltammetry measurements. Two linear dynamic ranges of 0.6 to 10.0???M and 10.0 to 400.0???M and detection limit of 0.17???M for hydrazine determination were evaluated using differential pulse voltammetry. In addition, OMWCNT?GCE was shown to be successfully applied to determine hydrazine in various water samples.     

High-sensitive amperometric hydrazine sensor based on chemically synthesized zinc nitroprusside nanoparticle-supported carbon ceramic electrode

Zinc nitroprusside (ZnNP) nanoparticles were fabricated at the surface of zinc powder-doped carbon ceramic electrode (CCE) by a chemical derivatization process. This modified electrode was characterized by scanning electron microscopy, atomic force microscopy and cyclic voltammetry techniques. The charge transfer rate constant (k _s) and charge transfer coefficient (α) were calculated for the electron exchange reaction of the ZnNP thin film. The ZnNP nanoparticle-modified CCE (ZnNP|CCE) showed good electrocatalytic activity toward hydrazine oxidation. The limit of detection (S/N = 3) and sensitivity were found to be 0.16 µM and 0.21 µA/µM, respectively. The mechanism of hydrazine electrooxidation at the electrode surface was studied. Finally, the ZnNP|CCE was successfully used for the determination of trace amount of hydrazine in different spiked and real samples.     

Electrochemical behavior of electrodeposited rutin film on a multi-wall carbon nanotubes modified glassy carbon electrode. Improvement of the electrochemical reversibility and its application as a hydrazine sensor

By immobilizing rutin at the surface of a glassy carbon electrode (GCE) modified with multi-wall carbon nanotubes (MWCNT), a new modified electrode has been fabricated and its electrochemical behavior was investigated by cyclic voltammetry. Cyclic voltammograms of the resulting modified electrode show stable and a well defined redox couple with surface confined characteristics. The results show that the reversibility of rutin is significantly improved at a MWCNT modified GCE in comparison with GCE alone. The charge transfer coefficient, α, was calculated to be 0.4, and charge transfer rate constant, k_s, was 46.7 s⁻¹ in pH 8, indicating great facilitation of the electron transfer between rutin and MWCNT deposited on the electrode surface. The rutin MWCNT (RMWCNT) modified GCE showed excellent mediation of hydrazine oxidation: a decrease in the overvoltage of hydrazine electrooxidation was observed as well as a dramatic increase in the peak current compared to that seen at a rutin modified GCE (RMGCE), activated GCE or bare GCE. Hydrazine was determined amperometrically at the surface of RMWCNT modified GCE in pH 8. Under the optimized conditions the calibration curve is linear in the concentration range 2.0–190.0 μM hydrazine. The detection limit and sensitivity are 0.61 μM and 0.0656 μA μM⁻¹, respectively. Finally the kinetic parameters of the electron transfer coefficient, α, the heterogeneous rate constant of dependent to different potentials, k′(E), and the standard heterogeneous rate constant, k⁰, for oxidation of hydrazine at the RMWCNT surface were determined using various electrochemical methods. The advantages of this modified electrode for hydrazine determination are high sensitivity, excellent catalytic activity, short response time, wide linear range, and high exchange current density.     

Poly(2-amino-5-(4-pyridinyl)-1, 3, 4-thiadiazole) film modified electrode for the simultaneous determinations of dopamine, uric acid and nitrite

Poly(2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole) (PAPT) modified glassy carbon electrode (GCE) was fabricated and used for the simultaneous determinations of dopamine (DA), uric acid (UA) and nitrite (NO₂ ^?) in 0.1 mol?L^?1 phosphate buffer solution (PBS, pH 5.0) by using cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The results showed that the PAPT modified GCE (PAPT/GCE) not only exhibited electrocatalytic activities towards the oxidation of DA, UA and NO₂ ^? but also could resolve the overlapped voltammetric signals of DA, UA and NO₂ ^? at bare GCE into three strong and well-defined oxidation peaks with enhanced current responses. The peak potential separations are 130 mV for DA–UA and 380 mV for UA–NO₂ ^? using DPV, which are large enough for the simultaneous determinations of DA, UA and NO₂ ^?. Under the optimal conditions, the anodic peak currents were correspondent linearly to the concentrations of DA, UA and NO₂ ^? in the ranges of 0.95–380 μmol?L^?1, 2.0–1,000 μmol?L^?1 and 2.0–1,200 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. The correlation coefficients were 0.9989, 0.9970 and 0.9968, and the detection limits were 0.2, 0.35 and 0.6 μmol?L^?1 for DA, UA and NO₂ ^?, respectively. In 0.1 mol?L^?1 PBS pH 5.0, the PAPT film exhibited good electrochemical activity, showing a surface-controlled electrode process with the apparent heterogeneous electron transfer rate constant (k _s) of 25.9 s^?1 and the charge–transfer coefficient (α) of 0.49, and thus displayed the features of an electrocatalyst. Due to its high sensitivity, good selectivity and stability, the modified electrode had been successfully applied to the determination of analytes in serum and urine samples.     

Amperometric sulfite sensor based on multiwalled carbon nanotubes/ferrocene-branched chitosan composites

A novel amperometric sensor for the determination of sulfite was fabricated based on multiwalled carbon nanotubes (MWCNTs)/ferrocene-branched chitosan (CHIT-Fc) composites-covered glassy carbon electrode (GCE). The electrochemical behavior of the sensor was investigated in detail by cyclic voltammetry. The apparent surface electron transfer rate constant (K_s) and charge transfer coefficient (α) of the CHIT-Fc/MWCNTs/GCE were also determined by cyclic voltammetry, which were about 1.93 cm s⁻¹ and 0.42, respectively. The sensor displayed good electrocatalytic activity towards the oxidation of sulfite. The peak potential for the oxidation of sulfite was lowered by at least 330 mV compared with that obtained at CHIT/MWCNTs/GCE. In optimal conditions, linear range spans the concentration of sulfite from 5 μM to 1.5 mM and the detection limit was 2.8 μM at a signal-to-noise ratio of 3. The proposed method was used for the determination of sulfite in boiler water. In addition, the sensor has good stability and reproducibility.     

Sensitive voltammetric determination of rutin at a carbon nanotubes-ionic liquid composite electrode

A new composite electrode of multiwall carbon nanotubes (MWNTs) and 1-dodecyl-3-methylimidazolium hexafluorophosphate (DDMIMPF₆) was fabricated to determine rutin. This electrode showed very attractive electrochemical performances compared to other kinds of ionic liquid modified electrodes and notably improved sensitivity and stability. Electrochemical behavior of rutin at the composite electrode had been investigated in pH 2.09 Britton–Robinson buffer solution by cyclic voltammetry and square wave voltammetry. The experimental results suggested that the composite electrode exhibited an electrocatalytic activity toward the redox of rutin. The electrochemical parameters of rutin were calculated with the results of the charge transfer coefficient (α) and the standard rate constant (k _s) as 0.48 and 2.09 s^?1. Under the selected conditions, the reduction peak current was linearly dependent on the concentration of rutin in the range of 0.03–1.5 μM, with a detection limit of 0.01 μM (S/N?=?3). The relative standard deviation for six times successive determination of 1 μM rutin was 1.6 %. The method was successfully applied to the determination of rutin in tablets and urine samples without the influence of the coexisting substances. In addition, the MWNTs/DDMIMPF₆ composite electrode exhibits a distinct advantage of simple preparation, surface renewal, good reproducibility, and stability.     

Electrochemistry and electrocatalytic activity of catechin film on a glassy carbon electrode toward the oxidation of hydrazine

A very stable electroactive film of catechin was electrochemically deposited on the surface of activated glassy carbon electrode. The electrochemical behavior of catechin modified glassy carbon electrode (CMGCE) was extensively studied using cyclic voltammetry. The properties of the electrodeposited films, during preparation under different conditions, and the stability of the deposited film were examined. The charge transfer coefficient (α) and charge transfer rate constant (k _s) for catechin deposited film were calculated. It was found that the modified electrode exhibited excellent electrocatalytic activity toward hydrazine oxidation and it also showed a very large decrease in the overpotential for the oxidation of hydrazine. The CMGCE was employed to study electrocatalytic oxidation of hydrazine using cyclic voltammetry, rotating disk voltammetry, chronoamperometry, amperometry and square-wave voltammetry as diagnostic techniques. The catalytic rate constant of the modified electrode for the oxidation of hydrazine was determined by cyclic voltammetry, chronoamperometry and rotating disk voltammetry and was found to be around 10⁻³ cm s⁻¹ . In the used different voltammetric methods, the plot of the electrocatalytic current versus hydrazine concentration is constituted of two linear segments with different ranges of hydrazine concentration. Furthermore, amperometry in stirred solution exhibits a detection limit of 0.165 μM and the precision of 4.7% for replicate measurements of 40.0 μM solution of hydrazine.     

Application of a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole/carbon nanotube modified glassy carbon electrode for voltammetric determination of hydrazine in water samples

The electrochemical behaviour of hydrazine at a 1‐benzyl‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole‐triazole/carbon nanotube modified glassy carbon electrode has been studied. The modified electrode shows an excellent electrocatalytic activity for the oxidation of hydrazine and accelerates electron transfer rate. The electrocatalytic current increases linearly with hydrazine concentration in the range 0.5–700.0 μm and the detection limit for hydrazine was 33.0 ± 2.0 nm . The diffusion coefficient (D = 2.5 ± 0.1 × 10^?5 cm² s^?1) and kinetic parameters such as the electron transfer coefficient, (α = 0.52) and the heterogeneous rate constant (k′ = 5.5 ± 0.1 × 10^?3 cm s^?1) for hydrazine were determined using electrochemical approaches. Finally, the method was employed for the determination of hydrazine in water samples. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrocatalytic Characteristics of Hydrazine and Hydroxylamine Oxidation at Coumestan Modified Carbon Paste Electrode

A coumestan derivative modified carbon paste electrode (CMCPE) was used as a sensitive electrochemical sensor for determination of electrocatalytic of hydrazine and hydroxylamine. The mechanism of electrocatalytic oxidation of both hydrazine and hydroxylamine using CMCPE was investigated by cyclic voltammetry and polarization studies. The kinetic parameters such as the electron transfer coefficient, α, heterogeneous rate constant, k′, and exchange current density, j₀, for oxidation of hydrazine and hydroxylamine at the CMCPE surface were determined using cyclic voltammetry. Further more, the linear dynamic range, sensitivity and limit of detection for hydrazine and hydroxylamine detections were evaluated using differential pulse voltammetry.     

Nanostructured Base Electrochemical Sensor for Simultaneous Quantification and Voltammetric Studies of Levodopa and Carbidopa in Pharmaceutical Products and Biological Samples

A novel carbon paste electrode modified with carbon nanotubes and 5‐amino‐2′‐ethyl‐biphenyl‐2‐ol (5AEB) was fabricated. The electrochemical study of the modified electrode, as well as its efficiency for electrocatalytic oxidation of levodopa (LD) and carbidopa (CD), is described. Cyclic voltammetry (CV) was used to investigate the redox properties of this modified electrode at various scan rates. The apparent charge transfer rate constant, k_s, and transfer coefficient, a, for electron transfer between 5AEB and CPE were calculated as 17.3 s^?1 and 0.5, respectively. Square wave voltammetry (SWV) exhibits a linear dynamic range from 2.5×10^?7 to 2.0×10^?4 M and a detection limit of 9.0×10^?8 M for LD.     

Self-assembling of Prussian blue nanocubic particles on nanoporous glassy carbon and its use in the electrocatalytic reduction of hydrogen peroxide

In this paper, self-assembled Prussian blue nanocubic particles on nanoporous glassy carbon was developed. The morphology of the PBNP-modified porous glassy carbon was characterized by scanning electron microscopy. The PBNP-GCE-red film-modified electrode was used for the sensitive detection of hydrogen peroxide. The electrochemical behavior of the resulting sensor was investigated using cyclic voltammetry and chronoamperometry. The value of α, k _cat, and D was calculated as 0.35, 1.7 × 10⁵ cm³ mol^?1 s^?1, and 2.6 × 10^?5 cm² s^?1, respectively. The calibration curve for hydrogen peroxide determination was linear over 0–600 μM with a detection limit (S/N = 3) of 0.51 μM.     

Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.     

Determination of nimesulide in human serum using a glassy carbon electrode modified with SiC nanoparticles

A glassy carbon electrode (GCE) was modified with silicon carbide nanoparticles and used to investigate the electrochemistry of the drug nimesulide via voltammetry and chronoamperometry. The structure of the modified electrode was studied by field emission scanning electron microscopy. Nimesulide undergoes electroreduction at pH 2 at a potential that is shifted from ?526 mV (at the bare GCE) to ?387 mV at the modified electrode. Simultaneously, sensitivity is increased by a factor of 5.8. The charge transfer coefficient, diffusion coefficient, standard heterogeneous rate constant and catalytic reaction rate constant were determined. A plot potential vs. pH revealed a voltammetric pKa value of about 6.5–7.0. The differential pulse voltammetric calibration plot for nimesulide is linear in 0.09–8.7 μM concentration range, and the detection limit and sensitivity are 30 nM and 512 nA.μM^?1, respectively. The modified electrode was applied to the determination of nimesulide in acidic solution and human blood serum samples without further pretreatment. The recoveries, as determined by the standard addition method, range from 95.7 to 98.7%, with an RSD of around 1.6%.

Electrochemical redox pattern and allied interactive behaviour of FAD on a ruthenium-modified glassy carbon electrode surface

The redox and interactive behaviour of flavin adenine dinucleotide (FAD) with a ruthenium (Ru)-modified glassy carbon electrode (GCE) was investigated. The electron-transfer kinetics on the Ru-modified GCE gives an apparent electron-transfer coefficient, α _app of 0.56, and an apparent heterogeneous electron transfer rate constant, k _app of 2.32?s^?1, respectively. The cyclic voltammetry (CV) complemented by alternating cyclic voltammetry (ACV) shows reduction of FAD to be a quasi-reversible reaction involving FAD adsorption. The adsorption of FAD on the Ru-modified GCE fits a Langmuir adsorption isotherm. The large apparent negative Gibbs energy of adsorption ΔG _ads (?38.2?kJ?mol^?1) of FAD onto the Ru-modified GCE confirmed a strong chemical adsorption of FAD on the surface. The deposited Ru islands block surface sites for FAD adsorption and the electron-transfer communication between FAD and the electrode surface does not significantly improve with a deposited Ru monolayer.     

Adsorptive Stripping Differential Pulse Voltammetric Determination of Risperidone with a Multi‐Walled Carbon Nanotube‐Ionic Liquid Paste Modified Glassy Carbon Electrode

A new composite electrode has been fabricated based on coating multi‐walled carbon nanotubes (MWCNTs) and n‐octylpyridinum hexafluorophosphate (OPPF₆) ionic liquid composite on a glassy carbon (GC) electrode (OPPF₆‐MWCNTs/GCE). This electrode shows very attractive electrochemical performances for electrooxidation of risperidone (RIS) compared to conventional electrodes using carbon and mineral oil, notably improved sensitivity and stability. The oxidation peak potentials in cyclic voltammogram of RIS on the OPPF₆‐MWCNTs/GCE was occurred around 230 mV vs. SCE at Britton–Robinson (B–R) buffer (pH 4.0) at scan rate of 100 mV s^?1. The electrochemical parameters such as diffusion coefficient (D), charge transfer coefficient (α) and the electron transfer rate constant (k/_s) were determined using cyclic voltammetry. Under the optimized conditions, the peak current was linear to risperidone concentration over the concentration range of 10–200 nM with sensitivity of 0.016 μA/nM^?1 using differential pulse voltammetry. The detection limit was 6.54 nM (S/N = 3). The electrode also displayed good selectivity and repeatability. In the presence of clozapine (CLZ) the response of RIS kept almost unchanged. Thus this electrode could find application in the determination of RIS in some real samples. The analytical performance of the OPPF₆‐MWCNTs/GCE was demonstrated for the determination of RIS in human serum and pharmaceutical samples.     

Enhanced electron transfer by bovine serum albumin covalently attached to glassy carbon electrode and its application to determination of hydroquinone

Bovine serum albumin (BSA) was covalently attached to glassy carbon electrode (GCE) surface by the electrochemical method. An enhancement for the redox of hydroquinone (HQ) on BSA/GCE was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy measurement. The electron transfer rate constant (k _s) on the BSA/GCE electrode is almost three orders of magnitude higher than that on bare GCE. The enhancing effect can be attributed to the electrostatic force between the positively charged HQ and negatively charged BSA. It is found that the enhanced redox process of HQ can be used to determine HQ sensitively. The oxidation current can reach 95% of its steady-state value within 30 s. The linear range for HQ determination is from 2.5 × 10^?8 M to 1.325 × 10^?6 M with a detection limit of 8.6 × 10^?9 M at a signal-to-noise ratio of 3. The study may provide a simple, rapid and sensitive method for determination of HQ which is present in the natural environment and in chemical industry effluent.     

Design of a Sensitive Electrochemical Sensor Based on Ferrocene-reduced Graphene Oxide/Mn-spinel for Hydrazine Detection

Herein, we report construction of a ferrocene-reduced graphene oxide-Mn spinel modified glassy carbon electrode (Fc−G/Mn₃O₄/GCE) as a sensitive electrochemical probe for hydrazine detection via its oxidation. The synergistic effect of ferrocene, graphene oxide and Mn₃O₄ provides it a great electrocatalytic effect. The electrochemical investigations of Fc−G/Mn₃O₄/GCE were studied using cyclic voltammetry, while differential pulse voltammetry was utilized for recording the electrocatalytic sensing of hydrazine. The prepared Fc−G/Mn₃O₄ offers a platform for sensitive and selective detection of low-level hydrazine in two linear ranges from 0.045 to 108 μM and 108 to 653 μM with limit of detection 8.5 nM. Real sample analysis was also performed in local industrial water samples with satisfactory recovery results.     

A highly stable nano γ-Fe2O3/gold-film modified electrode for electrochemically sensitive sensing to hydrazine

The magnetic γ-Fe₂O₃ material was prepared in a new way and characterized by transmission electron microscopy and X-ray diffraction. It was modified on a glass carbon electrode (GCE) coated with gold film to form nano γ-Fe₂O₃/Au/GCE. The electrooxidation of hydrazine has been deeply explored with the resulting electrode in 0.1 M phosphate-buffered saline (pH 7.0). The affecting factors containing pH of supporting electrolyte, scan rate, deposition time, amount of γ-Fe₂O₃, and possible interferences were investigated, and the oxidation mechanisms of hydrazine on the γ-Fe₂O₃/Au/GCE were also explored. The amperometric response to hydrazine is linear in the range of 0.02 to 11 μM, and the detection limit is 6 nM at a SNR of 3. The prepared sensor exhibited good sensitivity, stability, and lower detection limit for the determination of hydrazine injection.     

Direct electrochemical behavior of cytochrome c, and its determination on phytic acid modified electrode

Phytic acid (PA) with its unique structure was attached to a glassy carbon electrode (GCE) to form PA/GCE modified electrode which was characterized by electrochemical impedance. The electrochemical behavior of cytochrome c (Cyt c) on the PA/GCE modified electrode was explored by cyclic voltammetry and differential pulse voltammetry. The Cyt c displayed a quasi-reversible redox process on PA modified electrode pH 7.0 phosphate buffer solution with a formal potential (E ^0′) of 57 mV (versus Ag/AgCl). The peak currents were linearly related to the square root of the scan rate in the range of 20–120 mV·s^?1. The electron transfer rate constant was determined to be 12.5 s^?1. The PA/GCE modified electrode was applied to the determination of Cyt c, in the range of 5?×?10^?6 to 3?×?10^?4 M, the currents increase linearly to the Cyt c concentration with a correlation coefficient 0.9981. The detection limit was 1?×?10^?6 M (signal/noise?=?3).     

A nano self-assembled artificial peroxidase: spectroscopic and electrochemical investigations

A nano-micelle with highly efficient peroxide activity was constructed by self-assembly of sodium dodecyl sulfate micellar, histidine and hematin in 50 mM phosphate buffer at 25 °C. UV–Vis spectrometry methods were utilized for characterization of the nanostructured material or artificial peroxidase (AP). The Michaelis–Menten (K _m) and catalytic rate (k _cat) constants of the AP were obtained to be 5.5 μM and 0.06 s^?1, respectively, in 50 mM phosphate buffer solution at pH 8.0. The catalytic efficiency of AP was evaluated to be 0.011 μM^?1 s^?1. The AP was also immobilized on a functional multi-wall carbon nanotubes-gold nanoparticles (AuNPs) nano-complex modified glassy carbon electrode (GCE). The transmission electron microscopy method was utilized for the characterization of the nano-materials. The electron-transfer rate constant (k _s) and the apparent Michaelis–Menten constant K _m ^app of the AP modified GCE were evaluated to be 1.36 s^?1 and 0.19 μM, respectively. For a biosensor without a redox protein, the properties of the AP modified GCE were significant and will further benefit from additional studies and improvement.