Isatin‐SO3H coated on amino propyl modified magnetic nanoparticles (Fe3O4@APTES@isatin‐SO3H) as a recyclable magnetic nanoparticle for the simple and rapid synthesis of pyrano[2,3‐d] pyrimidines derivatives

Isatin‐SO₃H coated on amino propyl modified magnetic nanoparticles (Fe₃O₄@APTES@isatin‐SO₃H) is found to be a novel, efficient, and reusable magnetic nanocatalyst, and characterized by FT‐IR, SEM, TEM, XRD, EDX, VSM, and TGA analysis. The magnetic nanocatalyst demonstrated outstanding performance in synthesis of pyrano[2,3‐d] pyrimidines derivatives via one‐pot three‐component reaction of various aromatic aldehydes 1, malononitrile 2, and barbituric acid 3 under reflux conditions in mixture of H₂O:EtOH (1:1) as solvent. Easy workup procedure, short reaction time, high yield, simple preparation and easy recovery of the catalyst, mild reaction conditions are some advantages of this work.     

Expeditious synthesis of diverse spiro fused quinoxaline derivatives using magnetically separable core–shell CoFe2O4@SiO2‐SO3H nanocatalyst under ultrasonication

A magnetically separable core–shell CoFe₂O₄@SiO₂‐SO₃H nanocatalyst has been successfully exploited as a heterogeneous acid catalyst in the synthesis of diversely substituted biologically important spiro fused pyrrolo/indolo[1,2‐a]quinoxaline derivatives through the condensation of N‐(2‐aminophenyl)pyrroles/indoles and various cyclic conjugated 1,2‐diones in ethanol under ultrasonic irradiation. Room temperature synthesis, short reaction time, wide substrate scope, good to excellent yield of products and use of a magnetically separable and recyclable nanocatalyst make this method attractive and practicable.     

One‐pot multicomponent synthesis of novel 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives,using a novel sulfamic acid functionalized Fe3O4 MNPs as highly effective nanocatalyst

The immobilization of sulfonic acid on the surface of Fe₃O₄ magnetic nanoparticles (MNPs) as a novel acid nanocatalyst has been successfully reported. The morphological features, thermal stability, magnetic properties, and other physicochemical properties of the prepared superparamagnetic core–shell (Fe₃O₄@PFBA–Metformin@SO₃H) were thoroughly characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy (EDS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis–differential thermal analysis (TGA‐DTA), atomic force microscopy (AFM), dynamic light scattering (DLS), Brunauer–Emmett–Teller (BET), and vibrating sample magnetometer (VSM) techniques. It was applied as an efficient and reusable catalyst for the synthesis of 2‐(piperazin‐1‐yl) quinoxaline and benzimidazole derivatives via a one‐pot multiple‐component cascade reaction under green conditions. The results displayed the excellent catalytic activity of Fe₃O₄@PFBA–metformin@SO₃H as an organic–inorganic hybrid nanocatalyst in condensation and multicomponent Mannich‐type reactions. The easy separation, simple workup, excellent stability, and reusability of the nanocatalyst and quantitative yields of products and short reaction time are some outstanding advantages of this protocol.     

Green synthesis of silver nanoparticles using Eucalyptus comadulensis leaves extract and its immobilization on magnetic nanocomposite (GO-Fe3O4/PAA/Ag) as a recoverable catalyst for degradation of organic dyes in water

The magnetically recyclable graphene oxide-Fe₃O₄/polyallylamine (PAA)/Ag nanocatalyst was prepared via a green route using Eucalyptus comadulensis leaves extract as both reducing and stabilizing agent. The catalytic activity of this nanocatalyst was investigated for the reduction reaction of methylene blue and methyl orange in the presence of NaBH₄ in aqueous medium at room temperature. The prepared nanocatalyst was characterized by different methods such as Fourier transformed infrared spectroscopy, X-ray diffraction, scanning electron microscopy–energy dispersive X–ray spectroscopy, thermogravimetric analysis, vibrating sample magnetometer, transmission electron microscopy, and UV–visible spectroscopy. The results show that graphene oxide/PAA/Ag nanocatalyst has good activity and recyclability, and can be reused several times without major loss of activity in the reduction process. The apparent rate constants of the methyl orange (MO) and methylene blue (MB) were calculated to be 0.077 s⁻¹ (3 mg of catalyst) and 0.15 s⁻¹ (2 mg of catalyst), respectively.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

Synthesis,characterization and application of Fe3O4@SiO2@CPTMO@DEA-SO3H nanoparticles supported on bentonite nanoclay as a magnetic catalyst for the synthesis of 1,4-dihydropyrano[2,3-c]pyrazoles

Fe₃O₄ nanoparticles were prepared and decorated on the surface of nanobentonite (NB), and subsequently modified by the organic and inorganic linkers and then sulfonic acid immobilization on the nanoparticles. The NB-Fe₃O₄@SiO₂@CPTMO@DEA-SO₃H catalyst was characterized via Fourier transform-infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating-sample magnetometer, X-ray diffraction patterns, Brunauer–Emmett–Teller and thermal gravimetric analysis. The new catalyst benefits from a simple preparation method, and environmentally friendly and high magnetic properties of the nanocatalyst, Accordingly, we used it for the synthesis of dihydropyrano[2,3c]pyrazole derivatives in water and ethanol mixture as a green solvent under reflux conditions. Use of mild conditions, easy catalyst separation, cost-effectiveness, short reaction time, reusability of the catalyst, excellent yield and easy work-up are the main advantages of the present method.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

L-lysine-Pd Complex Supported on Fe3O4 MNPs: a novel recoverable magnetic nanocatalyst for Suzuki C-C Cross-Coupling reaction

In this work, L-lysine-Pd Complex, immobilized onto the surface of Fe₃O₄ MNPs, was successfully prepared via simple and inexpensive procedure. The prepared nanocatalyst was considered as a robust and clean nano-reactor catalyst for the Suzuki and Heck C-C Cross-Coupling reactions in water as the green condition. This eco-friendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), X-Ray Diffractometer (XRD), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma atomic emission spectroscopy (ICP), X-ray mapping, BET, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) techniques. The use of a green medium, easy separation and workup, excellent reusability of the nanocatalyst and short reaction time are some outstanding advantages of this method.     

Functionalized CoFe2O4/lamellar mesopore silica anchored to melamine nanocomposite as a novel catalyst for synthesis of 4H-chromenes under mild conditions

In this research, it was displayed an efficient method for the one-pot reaction of cyclohexanone, benzaldehyde and malononitrile for the synthesis of 4H-chromenes by using CoFe₂O₄/lamellar mesopore silica anchored to melamine as a magnetic nanocatalyst. This nanocatalyst was prepared in several steps and discriminated by XRD, FT-IR, SEM, VSM, TGA and BET techniques. The catalyst has a large active base site that has functionalized in both the surface and the pore of nanostructure. The advantages of magnetic nanocatalyst were simple accessible, heterogeneous nanocatalyst, easy work up and reusability. The various derivatives of 4H-chromenes were synthesized in the presence of CoFe₂O₄/lamellar mesopore silica/melamine magnetic nanocatalyst with the excellent yields and appropriate times. The products were identified by the melting point, FT-IR, ¹H NMR, ¹³C NMR and C.H.N techniques.     

L-Tyrosine-Pd complex supported on Fe3O4 magnetic nanoparticles: A new catalyst for C–C coupling and Synthesis of sulfides

In the present work, Fe₃O₄@L-Tyrosine-Pd heterogeneous nanocatalyst was prepared by a simple and inexpensive procedure. The prepared nanocatalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray Diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM), Transmission electron microscopy)TEM(, X-ray mapping, thermal gravimetric analysis (TGA), N₂ adsorption and desorption (BET) and vibrating sample magnetometer (VSM) techniques. Besides, it was employed as an efficent catalyst for C-C cross coupling and S-arylation reactions under green conditions. The optimized conditions for these reactions are described. The heterogeneous catalyst can be easily separated by applying a simple magnet and can also be reused in several consecutive runs without appreciable change in its catalytic activity.     

Equisetum arvense As an abundant source of silica nanoparticles. SiO2/H3PW12O40 nanohybrid material as an efficient and environmental benign catalyst in the synthesis of 2‐amino‐4H‐chromenes under solvent‐free conditions

Uniform SiO₂ nanoparticles were successfully prepared from Equisetum arvense obtained from the north‐east of Iran. Then, surface modification of the extracted nanoparticles was performed with a methanol solution of H₃PW₁₂O₄₀ via wet impregnation method. The prepared nanocatalyst was characterized by XRD, FESEM, ICP, UV–Vis, and FT‐IR spectroscopy. The supported heterogeneous nanocatalyst was successfully applied as a Lewis/Bronsted acid catalyst in the synthesis of a series of substituted 4H–chromenes via condensation of aromatic aldehydes, malononitrile, and 4‐hydroxycoumarin under solventless conditions with fine yields in appropriately short times.     

A novel magnetic nanocatalyst Fe3O4@PEG–Ni for the green synthesis of 2,3-dihydroquinazolin-4(1H)-ones

Ni-PEG (polyethylene glycol) complex supported on magnetic nanoparticle was created by grafting. The catalytic activity of Fe₃O₄@PEG–Ni was explored through one-pot green synthesis of 2,3-dihydroquinazolin-4(1H)-ones and used as an efficient and recoverable nanocatalyst. FT-IR, XRD, EDS, BET, TGA, VSM and SEM techniques were employed to specify the nanocatalyst. This heterogeneous nanocatalyst demonstrated acceptable recyclability and could be reused several times with no considerable loss of its catalytic activity.     

Synthesis of 2,3-dihydroquinazolin-4(1H)-ones in the presence of Fe3O4@nano-cellulose–OPO3H as a bio-based magnetic nanocatalyst

In this research, we have used Fe₃O₄@nano-cellulose–OPO₃H as magnetic bio-based nanocatalyst for the synthesis of 2,3-dihydroquinazolin-4(1H)-ones via condensation of 2-aminobenzamide and different aldehydes. The major advantages of the present methodology are good yields, ecofriendly catalyst, and easy workup.     

Supramolecular Fe3O4@PEG/−diaza crown ether@Ni: a novel magnetically reusable nano catalyst for the clean synthesis of 2‐aryl‐2,3‐dihydroquinazolin‐4(1H)‐ones

Ni@diaza crown ether complex supported on magnetic nanoparticle was provided by grafting technique. The catalytic activity of Fe₃O₄@diaza crown ether@Ni was explored through one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and it was used as an efficient and recoverably constant nanocatalyst. FT‐IR, SEM, TEM, XRD, BET, ICP, EDS, and TGA techniques were employed to specify the nanocatalyst. This heterogeneous catalyst demonstrated acceptable recyclability and could be used again several times with no considerable loss of its catalytic activity.     

Green synthesis of Fe3O4@SiO2‐Ag magnetic nanocatalyst using safflower extract and its application as recoverable catalyst for reduction of dye pollutants in water

This paper reports the green and in situ preparation of Fe₃O₄@SiO₂‐Ag magnetic nanocatalyst synthesized using safflower (Carthamus tinctorius L.) flower extract without the addition of any stabilizers or surfactants. The catalytic performance of the resulting nanocatalyst was examined for the reduction of 4‐nitrophenol (4‐NP), methylene blue (MB) and methyl orange (MO) in an environment‐friendly medium at room temperature. The main factors such as pH, temperature and amount of catalyst influencing the nanocatalyst performance were studied. The apparent rate constants for 4‐NP, MO and MB reduction were calculated, being 0.756 min^?1, 0.064 s^?1 and 0.09 s^?1, respectively. The catalyst was recovered using an external magnet and reused several times with negligible loss of catalytic activity. The as‐synthesized nanoparticles were characterized using powder X‐ray diffraction, transmission electron microscopy, UV–visible, Fourier transform infrared and inductively coupled plasma atomic emission spectroscopies, dynamic light scattering and vibrating sample magnetometry.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Hiyama cross‐coupling reaction using Pd(II) nanocatalyst immobilized on the surface of Fe3O4@SiO2

We report a simple process for the synthesis of Fe₃O₄@SiO₂/APTMS (APTMS = 3‐aminopropyltrimethoxysilane) core–shell nanocatalyst support. The new nanocatalyst was prepared by stabilization of Pd(cdha)₂ (cdha = bis(2‐chloro‐3,4‐dihydroxyacetophenone)) on the surface of the Fe₃O₄@SiO₂/APTMS support. The structure and composition of this catalyst were characterized using various techniques. An efficient method was developed for the synthesis of a wide variety of biaryl compounds via fluoride‐free Hiyama cross‐coupling reactions of aryl halides with arylsiloxane, with Fe₃O₄@SiO₂/APTMS/Pd(cdha)₂ as the catalyst under reaction conditions. This methodology can be performed at 100°C through a simple one‐pot operation using in situ generated palladium nanoparticles. High catalytic activity, quick separation of catalyst from products using an external magnetic field and use of water as green solvent are attributes of this protocol.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Synthesis of Novel Triazole Incorporated Thiazolone Motifs Having Promising Antityrosinase Activity through Green Nanocatalyst CuI-Fe3O4@SiO2 (TMS-EDTA)

In the present work, novel 5-((1-benzyl-1,2,3-triazol-4-yl)methoxybenzylidene)-2-(arylamino)thiazol-4-one thiazolone incorporated triazole derivatives have been designed as tyrosinase inhibitors. The compounds were synthesized through click reaction in good yield. Moreover, the antityrosinas activity of the synthesized derivatives was evaluated. In the search for establishing a click copper-catalyzed azide/alkyne cycloaddition (CuAAC) reaction under strict conditions, in terms of a novel air-stable, a recyclable and efficient magnetic catalyst was planned for new triazole derivatives as a well-organized copper iodide supported on the functionalized Fe₃O₄@SiO₂ core-shell (CuI/Fe₃O₄@SiO₂(TMS-EDTA) nanoparticles). The engineered nanocatalyst synthesized for the first time and characterized by different methods, including FT-IR spectroscopy, XRD, FESEM, EDX, TEM, TGA, and BET analysis. The excellent catalytic performance in ethanol with high surface area (351.7 m²g⁻¹) and short reaction time for diverse functional groups (120–200 min), no use of toxic solvents, reusability of the catalyst, and using eco-friendly conditions are the advantageous of this work. Moreover,the nanocatalyst can be used at least five times without any significant decrease in the yield of the reaction. The thiazolidine-triazole derivatives 9a , 9c , 9e , and 9 g showed promising tyrosinase inhibitory activity with IC₅₀ values in the range of 5.90–9.81 μM. The compounds were found to be considerably more potent tyrosinase inhibitors than the reference inhibitor kojic acid (IC₅₀ = 18.36 μM).