Raman and surface-enhanced Raman spectroscopy evidence for oxidation-induced decomposition of graphite

It has been proposed that reduction of exfoliated graphite oxide could be a potential method for producing large quantities of graphene. Raman and surface-enhanced Raman spectroscopy are used to show that oxidation of graphite and exfoliated graphite significantly increases the defect structure of both materials. This would likely lead to a heavily defected graphene structure when oxygen is removed. To insure the observed decomposition is not due to the laser light, the effect of laser intensity on the materials was investigated. It was found that at the highest laser intensity (1.4 × 10⁸ W/M²) there was a significant increase in defects. However, lower laser intensity was found which did not produce defects and was used in the studies of the effect of oxidation on the spectra.     

State of the art and recent advances in the ultrasound-assisted synthesis,exfoliation and functionalization of graphene derivatives

Sonochemistry, an almost a century old technique was predominantly employed in the cleaning and extraction processes but this tool has now slowly gained tremendous attention in the synthesis of nanoparticles (NPs) where particles of sub-micron have been produced with great stability. Following this, ultrasonication techniques have been largely employed in graphene synthesis and its dispersion in various solvents which would conventionally take days and offers poor yield. Ultrasonic irradiation allows the production of thin-layered graphene oxide (GO) and reduced graphene oxide (RGO) of up to 1 nm thickness and can be produced in single layers. With ultrasonic treatment, reactions were made easy whereby graphite can be directly exfoliated to graphene layers. Oxidation to GO can also be carried out within minutes and reduction to RGO is possible without the use of any reducing agents. In addition, various geometry of graphene can be produced such as scrolled graphene, sponge or foam graphene, smooth as well as those with rough edges, each serving its own unique purpose in various applications such as supercapacitor, catalysis, biomedical, etc. In ultrasonic-assisted reaction, deposition of metal NPs on graphene was more homogeneous with custom-made patterns such as core-shell formation, discs, clusters and specific deposition at the edges of graphene sheets. Graphene derivatives with the aid of ultrasonication are the perfect catalyst for various organic reactions as well as an excellent adsorbent. Reactions which used to take hours and days were significantly reduced to minutes with exceedingly high yields. In a more recent approach, sonophotocatalysis was employed for the combined effect of sonication and photocatalysis of metal deposited graphene. The system was highly efficient in organic dye adsorption. This review provides detailed fundamental concepts of ultrasonochemistry for the synthesis of graphene, its dispersion, exfoliation as well as its functionalization, with great emphasis only based on recent publications. Necessary parameters of sonication such as frequency, power input, sonication time, type of sonication as well as temperature and dual-frequency sonication are discussed in great length to provide an overview of the resultant graphene products.     

Sonodynamic inactivation of methicillin-resistant Staphylococcus aureus in planktonic condition by curcumin under ultrasound sonication

Methicillin-Resistant Staphylococcus aureus (MRSA) is an important cause of difficult-to-treat infections. The present study aims to investigate sonodynamic inactivation of MRSA in planktonic condition using curcumin under ultrasound sonication. Dark toxicity of curcumin to MRSA was investigated to choose the concentration range of curcumin used in the study. The uptake of curcumin in MRSA was observed before ultrasound sonication. After sonication colony forming units (CFUs) and bacterial viability were investigated using fluorescence assay. Additionally, chromosomal DNA fragmentation was also analyzed. Curcumin showed no dark toxicity to MRSA in the concentration range of ?500 μM. The maximum uptake of curcumin in MRSA occurred in 50 min after curcumin incubation. Counting of CFUs showed that curcumin had significantly sonodynamic killing effect on MRSA in a curcumin dose-dependent manner, and 5-log reduction in CFU was observed after curcumin treatment (40 μM) at room temperature in the dark for 50 min followed by exposure to ultrasound with intensity of 1.56 W/cm² for 5 min. The ratio of green-fluorescent intensity to red-fluorescent intensity was obviously decreased after curcumin treatment under ultrasound sonication. No significant change in chromosomal DNA was found in the cultured MRSA after the combined treatment of curcumin and ultrasound. These results demonstrated that sonodynamic action of curcumin had significant inactivation of MRSA in planktonic condition.     

Aqueous-phase exfoliation of graphite in the presence of polyvinylpyrrolidone for the production of water-soluble graphenes

Treatment of crystalline graphite fine powder with an aqueous solution of the harmless and versatile substance polyvinylpyrrolidone under sonication results in water-soluble, polymer-protected graphene single layers without oxidation or destruction of the sp² character of the carbon core. The liquid-phase extraction of graphene monolayers was evidenced by TEM and AFM techniques, while their graphitic character was checked with Raman spectroscopy. Besides PVP, the water-soluble biopolymers albumin and sodic carboxymethylcellulose were also employed successfully in the aqueous-phase exfoliation of graphite, thereby supporting the generic character of the present method using a variety of suitable polymeric extractants.     

Hydrothermal conversion of graphite to carbon nanotubes (CNTs) induced by bubble collapse

Cu–Fe–CNTs and Ni–Fe–CNTs coatings were deposited on gray cast iron by a hydrothermal approach. It was demonstrated that, the flaky graphite of gray cast iron was exfoliated to graphene nanosheets under hydrothermal reactions, and graphene nanosheets were scrolled to CNTs. After high temperature treatments, the volume losses of Cu–Fe–CNTs and Ni–Fe–CNTs coatings were 52.6 % and 40.0 % of gray cast iron substrate at 60 min wear tests, respectively, obviously increasing the wear properties of gray cast iron. During hydrothermal reactions, water jets and shock waves were produced by bubble collapse. Induced by the water jets and shock waves, exfoliation of flaky graphite was performed, producing exfoliated graphene nanosheets. Attacked by the radially distributed water jets and shock waves, graphene nanosheets were curved, shaped to semicircle morphology and eventually scrolled to tubular CNTs.     

Fabrication of ultrasound-mediated tunable graphene oxide nanoscrolls

In this work, a cost-effective and facile method was adopted for the fabrication of graphene oxide nanoscrolls (GONS) by low frequency (20 kHz) ultrasonication with tunable dimensions. The graphene oxide (GO) was synthesized by modified Hummer’s method using synthetic graphite as a base material. Later, GO suspension (0.05 g L⁻¹) were made using methanol as solvent and subjected to different ultrasonication conditions. It was found that GO sheets curls themselves into nanoscrolls by overcoming the energy barrier for scrolling with the help of bubble cavitation energy provided by ultrasonication. Also, the effect of ultrasonication power (100–150 W) for irradiation time (0.5–3 h) over the GONS dimensions were investigated. The spiral wounded GONS structures were shown using electron microscopy. Raman Spectroscopy, Thin-film X-Ray Diffraction, Energy Dispersive X-Ray, FT Infrared Spectroscopic analysis were also done to endorse GONS formation. Factors affecting GONS formation such as sonication power and solvent selection were studied as scrolling of GO sheets are strongly dependent on sonication parameters and solvent characteristics. It was found that GONS length varies inversely with irradiation time for identical power density. Also, a solvent with relatively large Hansen solubility parameter, lower dipole movement and less negative value of zeta potential support GONS formation of longer length. Raman analysis overlays the rapid oxygen-defect site cleavage mechanism. The obtained GONS unlocks further developments in various engineering applications like adsorption, drug delivery and filtration membrane.     

A green synthetic approach to graphene nanosheets for hydrogen adsorption

A green and facile strategy of preparing graphene by reducing exfoliated graphite oxide (GO) with glucose was developed in this study. The as-prepared samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The characterization results indicated that the graphene sheets (GS) were of high quality with smooth surface, rich pore structure and few layer graphene. The samples have a BET specific surface area of 1205.8 m² g⁻¹ measured by N₂ adsorption at 77 K. The hydrogen storage capacity of 2.7 wt.% at 298 K and 25 bar demonstrated that the as-prepared graphene employing glucose as reductant is supposed to be a promising material with outstanding property for hydrogen storage.     

Sodium Intercalation of Graphene Films on Re( $$10\bar 10$$ 10 1 ¯ 0 )

It is shown that during low-temperature (300–500 K) intercalation of sodium atoms into thin multilayer graphene and graphite films on rhenium the first graphene layer plays the role of a trap to which atoms coming on the surface diffuse through a graphite film. The intercalation phase of the interlayer space in the graphite bulk is actively filled at a sodium atoms concentration under the first graphene layer close to the maximum possible (2 ± 0.5) × 10¹⁴ cm^–2. This phase capacity is proportional to the graphite film thickness that can be varied in this work from one graphene layer to ~50 atomic layers. The diffusion energy E _d of Na atoms through the graphite film was estimated to be E _d ≈ 1.4 eV.

     

Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion

The exceptional properties of graphene and its structural uniqueness can improve the performance of nanocomposites if it can attain the uniform dispersion. Tip sonication assisted graphene solvent dispersion has been emerged as an efficient approach but it can cause significant degradation of graphene structure. This study aimed to evaluate the parametric influence of tip sonication on the characteristics of sp² carbon structure in graphene nanoplatelets by varying the sonication time and respective energy at three different amplitudes (60%, 80% and 100%). The study is essential to identify appropriate parameters so as to achieve high-quality and defect-free graphene with a highly desirable aspect ratio after solvent dispersion for composite reinforcement. Quantitative approach via Raman spectroscopy is used to find the defect ratio and lateral size of graphene evolved under the effect of tip sonication parameters. Results imply that the defect ratio is steady and increases continually with GNPs, along with the transformation to the nano-crystalline stage I up to 60 min sonication at all amplitudes. Exfoliation was clearly observed at all amplitudes together with sheet re-stacking due to considerable size reduction of sheets with large quantity. Finally, considerable GNPs fragmentation occurred during sonication with increased amplitude and time as confirmed by the reduction of sp² domain (La) and flake size. This also validates the formation of edge-type defect in graphene. Convincingly, lower amplitude and time (up to 60 min) produce better results for a low defect content and larger particle size as quantified by Raman analysis.     

Fabrication of a graphene field effect transistor array on microchannels for ethanol sensing

A new approach to the fabrication of back-gated graphene FET (field effect transistor) arrays on microchannels was investigated. Narrow walls fabricated on a substrate with SU-8 (a negative photoresist), with top metal electrodes were pressed onto another silicon/SiO₂ substrate with predeposited graphene pieces such that the electrodes came into contact with graphene pieces and formed the source and drain contact. The SU-8 narrow walls with the top metal layer were fabricated by the conventional lift-off process. The graphene pieces were reduced chemically from graphite oxide. The I_DS changed immediately by more than 17% when the device was exposed to an ethanol atmosphere. The current recovered very well after the ethanol gas was pumped out. The SU-8 microchannels served as gas flow passages that helped the ethanol vapor reach the sensitive region of the device: the graphene channel. This work provides a convenient way of constructing back-gated graphene FETs for sensing applications. This method could potentially be scaled up for mass production.     

Removal of disperse blue 2BLN from aqueous solution by combination of ultrasound and exfoliated graphite

This paper reports an efficient and convenient removal of disperse blue 2BLN from aqueous solution by the combination of ultrasound and exfoliated graphite. The various affecting factors were studied. The removal ratio of disperse blue 2BLN is 96.9% for the initial concentration of 200 mg/L using 600 mg/L exfoliated graphite (exfoliation volume of 300 mL/g) at 45 degrees C within 120 min under ultrasound. The combination method was more effective than sonolysis or exfoliated graphite treatment individually.     

Sonochemical preparation of bismuth oxide nanotiles decorated exfoliated graphite for the electrochemical detection of imipramine

This work described the sonohydrolysis of Bi(NO₃)₃ into Bi₂O₃ and simultaneous sonochemical exfoliation of graphite into graphene sheets in the alkaline environment and its electocatalytic performance towards the detection of anti-depression drug imipramine (IMPR). The ultrasound (37/80 kHz; 60 W) effectively hydrolyzed the Bi(NO₃)₃ into a single crystalline monoclinic phase of Bi₂O₃ nanotiles in the alkaline condition. And also, the sonochemical reaction condition can trigger the lamellar particles on the graphite bulk surface and allowed to exfoliated the graphite (EG) into graphene nanosheets as well. The material characterizations are done by XRD, Raman, FESEM, and HRTEM. It shows the α-Bi₂O₃ nanotiles along with EG nanosheets with high crystallinity and low defects. The (0 0 2) plane in XRD confirms the high crystalline nature of EG. The monoclinic stretching vibrations (90–600 cm⁻¹) confirms the Raman modes of Bi₂O₃. The prepared Bi₂O₃-EG composites are subjected to the electrochemical determination of IMPR which revealed appreciable analytical performances. The results showed that the Bi₂O₃-EG exhibits better results in the 3 h sonication process. Bi₂O₃-EG-3 exhibited a good linear range (0.02–82.3 µM) and an acceptable limit of detection (6 nM). And also Bi₂O₃-EG-3 exhibits the significant tolerance limit when compared to other potential interfering compounds.     

Simple method for synthesizing few-layer graphene as cathodes in surface-enabled lithium ion-exchanging cells

In order to realize a wider application for graphene materials specifically in the field of energy storage, a simple and mass-scalable method described as “the atmospheric, low-temperature, shock-heating process” is proposed in this work. During this low-temperature process, the graphite oxide without pre-treatment is completely exfoliated to form the few-layer graphene materials at atmospheric conditions. The Brunauer-Emmett-Teller (BET)-specific surface area of acquired material at 350 °C can reach 487 m² g^?1. The acquired few-layer graphene materials are also confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM). The results demonstrate that this simple method is feasible for synthesizing the few-layer graphene materials. Besides that, the acquired graphene is also used as the cathode material in the surface-enabled lithium ion-exchanging cell. The galvanostatic charge/discharge tests show that the graphene prepared from this method is suitable for this system and displays a satisfactory electrochemical performance. The acquired graphene sample exhibits the reversible capacities of around 187, 107, 84, 58, and 45 mAh g^?1 at 0.1, 2, 5, 10, and 15 A g^?1, respectively. At the current density of 0.5 A g^?1, the capacity retention can reach 75 % after 2000 cycles.     

Fermentation of Saccharomyces cerevisiae in a 7.5 L ultrasound-enhanced fermenter: Effect of sonication conditions on ethanol production,intracellular Ca2+ concentration and key regulating enzyme activity in glycolysis

In this study, the effect of sonication on the fermentation process of a single-celled fungus was examined. During the experiment, Saccharomyces cerevisiae (S. cerevisiae) was used as the starting strain for ethanol fermentation (batch fermentation) in a 7.5 L automated fermentation tank. The fermentation tank connected with a six-frequency ultrasonic equipment. Non-sonication treatment was set up as the control. Sonication treatment with power density of 280 W/L and 48 h of treatment time were set up as trial groups for investigating the influence of different ultrasound frequency including 20, 23, 25, 28, 33 and 40 kHz on the changes in dry cell-weight, glucose consumption rate, and ethanol yield. The results showed that the dry cell-weight, glucose consumption rate, and ethanol content reached the best results under the ultrasonic condition of 28 kHz ultrasound frequency in comparison with other ultrasound frequency. The dry cell-weight and ethanol content of the 28 kHz ultrasonic treatment group increased by 17.30% and 30.79%, respectively in comparison with the control group The residual sugar content dropped to a lower level within 24 h, which was consistent with the change in ethanol production. Besides, the results found that the glucose consumption rate increased compared to the control. It indicated that ultrasound accelerated glucose consumption contributed to increase the rate of ethanol output. In order to explore the mechanism of sonication enhanced the content of ethanol output by S. cerevisiae, the morphology, permeability of S. cerevisiae and key enzyme activities of ethanol synthesis were investigated before and after sonication treatment. The results showed that after sonication treatment, the extracellular nucleic acid protein content and intracellular Ca²⁺ concentration increased significantly. The morphology of S. cerevisiae was observed by SEM and found that the surface of the strain had wrinkles and depressions after ultrasonic treatment. furthermore after sonication treatment, the activities of three key enzymes which catalyze three irreversible reactions in glycolysis metabolism, namely, hexokinase, phosphofructokinase and pyruvate kinase increased by 59.02%, 109.05% and 87.27%, respectively. In a word, low-intensity ultrasound enhance the rate of ethanol output by S. cerevisiae might due to enhancing the growth and cell permeability of strains, and increasing the activities of three key enzymes of ethanol biosynthesis.     

Particle emissions from laboratory activities involving carbon nanotubes

This site study was conducted in a chemical laboratory to evaluate nanomaterial emissions from 20–30-nm-diameter bundles of single-walled carbon nanotubes (CNTs) during product development activities. Direct-reading instruments were used to monitor the tasks in real time, and airborne particles were collected using various methods to characterize released nanomaterials using electron microscopy and elemental carbon (EC) analyses. CNT clusters and a few high-aspect-ratio particles were identified as being released from some activities. The EC concentration (0.87 μg/m³) at the source of probe sonication was found to be higher than other activities including weighing, mixing, centrifugation, coating, and cutting. Various sampling methods all indicated different levels of CNTs from the activities; however, the sonication process was found to release the highest amounts of CNTs. It can be cautiously concluded that the task of probe sonication possibly released nanomaterials into the laboratory and posed a risk of surface contamination. Based on these results, the sonication of CNT suspension should be covered or conducted inside a ventilated enclosure with proper filtration or a glovebox to minimize the potential of exposure.     

Sonochemical decolorization of acid black 210 in the presence of exfoliated graphite

The decolorization of acid black 210 by ultrasonic irradiation in the presence of exfoliated graphite was investigated. Low pH value and large exfoliation volume of exfoliated graphite favored the ultrasonic decolorization of acid black 210. The combination method of ultrasonic waves and exfoliated graphite achieved better results than either exfoliated graphite or ultrasound alone. Improved decolorization efficiency has been observed in the present system compared to the process using a combination of ultrasound and activated carbon. In the combination method of ultrasonic waves and exfoliated graphite, approximately 99.5% of acid black 210 was removed using 0.8 g/l exfoliated graphite at a pH of 1 within 120 min at 51 degrees C.     

The impact of ultrasonic parameters on the exfoliation of NiFe LDH nanosheets as electrocatalysts for the oxygen evolution reaction in alkaline media

The ultrasonic process has been examined to exfoliate layered materials and upgrade their properties for a variety of applications in different media. Our previous studies have shown that the ultra-sonication treatment in water without chemicals has a positive influence on the physical and electrochemical performance of layered materials and nanoparticles. In this work, we have probed the impact of ultrasonication on the physical properties and the oxygen evolution reaction (OER) of the NiFe LDH materials under various conditions, including suspension concentration (2.5–12.5 mg mL⁻¹), sonication times (3–20 min) and amplitudes (50–90%) in water, in particular, sonication times and amplitudes. We found that the concentration, amplitude and time play significant roles on the exfoliation of the NiFe LDH material. Firstly, the NiFe LDH nanosheets displayed the best OER performance under ultrasonic conditions with the concentration of 10 mg mL⁻¹ (50% amplitude and 15 min). Secondly, it was revealed that the exfoliation of the NiFe LDH nanosheets in a short time (<10 min) or a higher amplitudes (≥80%) has left a cutdown on the OER activity. Comprehensively, the optimum OER activity was displayed on the exfoliated NiFe LDH materials under ultrasonic condition of 60% (amplitude), 10 mg mL⁻¹ and 15 min. It demanded only 250 mV overpotentials to reach 10 mA cm⁻² in 1 M KOH, which was 100 mV less than the starting NiFe LDH material. It was revealed from the mechanism of sonochemistry and the OER reaction that, after exfoliation, the promoted OER performance is ascribed to the enriched Fe³⁺ at the active sites, easier oxidation of Ni²⁺ to Ni³⁺, and the strong electrical coupling of the Ni²⁺ and Fe³⁺ during the OER process. This work provides a green strategy to improve the intrinsic activity of layered materials.     

Thermoelectric properties of unoxidized graphene/Bi2Te2.7Se0.3 composites synthesized by exfoliation/re‐assembly method

Nanocomposites of n‐type thermoelectric Bi₂Te_2.7Se_0.3 (BTS) and unoxidized graphene (UG) were prepared from the exfoliated BTS and UG nanoplatelets. Polycrystalline BTS ingots were exfoliated into nanoscoll‐type crystals by chemical exfoliation, and were re‐assembled with UG nanoplatelets. The composites were chemically reduced by hydrazine hydrate and sintered by a spark‐plasma‐sintering method. The thermoelectric properties of the sintered composites were evaluated and exhibited decreased carrier concentration and increased thermal conductivity due to the embedded graphene. The peak ZT values for the UG/BTS‐US and UG/BTS‐EX composites were ～0.8 at the UG concentration of 0.05 wt%. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ultrasound-assisted synthesis of graphene@MXene hybrid: A novel and promising material for electrochemical sensing

To date, multiple graphene@MXene hybrids have been reported via various synthesis approaches, but almost all the graphene@MXene hybrids inevitably used the reduced graphene oxide that prepared by chemical oxidation/reduction method, which generally involved the complex and dangerous operation procedure, and the highly toxic chemical reagent. How to prepare graphene@MXene hybrid through a simple, safe and eco-friendly synthetic route is highly desired. Compared with traditional synthesis technology, ultrasound synthesis strategy displays the merits of simplicity, low cost and environment protection. Herein, MXene (Ti₃C₂T_x) nanoflakes coupled with graphene nanosheets (graphene@MXene) were prepared in N-methylpyrrolidone (NMP) by simple ultrasound-assisted liquid-phase exfoliation method for the first time. Besides, the effect of types of solvent with different viscocity, sonication temperature and sonication duration time on the property of graphene@MXene hybrids were systematacially investigated. It is found the liquid-phase exfoliated graphene owned excellent electron transfer ability and the MXene (Ti₃C₂T_x) nanoflakes possessed outstanding adsorption property, the as-synthesized graphene@MXene hybrid exhibited significant signal synergistic enhancement effect toward the oxidation of hazardous veterinary drug residue compound (chlorpromazine) and food additives (rhodamine B). Based on this, a novel and sensitive electrochemical sensor was fabricated, the linear detection ranges were 5 nM to 0.5 μM for chlorpromazine with sensitivity of 1090 µA μM⁻¹ cm⁻², and 10 nM to 2.5 μM for rhodamine B with sensitivity of 440 and 102.14 µA μM⁻¹ cm⁻². Besides, the detection limits were evaluated to be as low as 1.25 nM and 2.45 nM for chlorpromazine and rhodamine B, respectively.     

Preparation of graphene/polyaniline-modified carbon nanotubes and their electrochemical properties in microbial fuel cell

Using chemical vapor deposition methods to prepare carbon nanotubes growing in situ on a carbon felt, graphene and polyaniline were applied to the carbon felt for modifying carbon nanotubes. Microbial fuel cell was constructed with graphene/polyaniline-modified carbon nanotubes as anode, graphite as cathode, and glucose solution as substrate. The effects of electrodes, substrate concentration, and temperature on the properties of microbial fuel cell have been studied. At 38 °C using glucose solution of 1450 mg L^?1 and external resistance of 2500 Ω, the optimum output voltage of 687 mV and removal rate of 83% for chemical oxygen demand were obtained in the microbial fuel cell. The prepared nanomaterials are stable and reusable.