Synthesis, characterization and photoluminescence properties of Ce3+-doped ZnO-nanophosphors

The present study involves the synthesis of Ce³⁺ doped ZnO nanophosphors by the zinc nitrate and cerium nitrate co-precipitation method. The synthesized nanophosphors were characterized with respect to their crystal structure, crystal morphology, particle size and photoluminescence (PL) properties using X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), transmission electron microscopy (TEM)/Energy-dispersive X-ray spectroscopy (EDS) and PL-spectroscopy respectively. XRD results revealed that ZnO nanophosphors are single phase and cubic type structures. Further, PL spectra of ZnO:Ce³⁺ nanophosphors showed green emission because of the charge transfer at single occupied oxygen vacancies with ZnO holes and red emission due to the cerium ion transitions. Intensity and fine structure of the Ce³⁺ luminescence and its temperature dependence are strongly influenced by the doping conditions. The formation of ZnO:Ce³⁺ nanophosphors was confirmed by Fourier transform infrared (FTIR) and XRD spectra.     

Controlled synthesis and characterization of LaPO4, LaPO4:Ce3+ and LaPO4:Ce3+, Tb3+ by EDTA assisted hydrothermal method

LaPO₄, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ particles with different morphologies and sizes have been successfully synthesized via a simple EDTA assisted hydrothermal method. The effects of the doping components, pH value, and the chelating reagent on the phases, structures and morphologies were well investigated by means of X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Photoluminescent (PL) spectra and kinetic decays were used to characterize the fluorescent properties of the samples. The results reveal that all the samples are of high purity and assigned to the single-crystalline monoclinic structure of LaPO₄ phase. The aspects ratio of the nanostructures synthesized in acid synthetic condition is larger than those obtained in alkaline solution. Additionally, the Ce³⁺ or/and Tb³⁺ doped LaPO₄ particles show less smoother surface compared with pure LaPO₄. Furthermore, the tendency for anisotropic growth under hydrothermal conditions can be simply enhanced by selecting the chelating ligands (EDTA). The possible growth mechanism of the LaPO₄:Ln³⁺ (Ln = Ce³⁺, Tb³⁺) nanostructures has been proposed as well. Upon ultraviolet excitation, LaPO₄:Ce³⁺ and LaPO₄:Ce³⁺, Tb³⁺ phosphors show the characteristic 5d–4f emissions of Ce³⁺ and ⁵D₄–⁷F_j (j = 6–3) emission lines of Tb³⁺, respectively.     

Preparation and luminescence properties of Ce and/or Tb doped LaPO4 nanofibers and microbelts by electrospinning

Ce³⁺ and/or Tb³⁺ doped LaPO₄ nanofibers and microbelts have been prepared by a combination method of sol-gel process and electrospinning. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), low voltage cathodoluminescence (CL) and time-resolved emission spectra as well as kinetic decays were used to characterize the resulting samples. SEM and TEM results indicate the as-formed precursor fibers and belts are smooth, and the as-prepared nanofibers and microbelts consist of nanoparticles. The doped rare-earth ions show their characteristic emission under ultraviolet excitation, i.e. Ce³⁺ 5d-4f and Tb³⁺⁵D₄-⁷F_J (J=6-3) transitions, respectively. The energy transfer process from Ce³⁺ to Tb³⁺ in LaPO₄:Ce³⁺, Tb³⁺ nanofibers was further studied by the time-resolved emission spectra. Under low-voltage electron beam excitation, LaPO₄:Ce³⁺, Tb³⁺ microbelt phosphors have a higher intensity than that of nanofiber phosphors.     

Synthesis of CeO<Subscript>2</Subscript> or α–Mn<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles via sol–gel process and their optical properties

Nanocrystalline cubic fluorite/bixbyite CeO₂ or α–Mn₂O₃ has been successfully synthesized by using methanol as a solvent via sol–gel method calcined at 400 °C. The obtained products were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), UV–vis absorption and Photoluminescence (PL) spectroscopy. TEM reveals that the as-synthesized ultra-fine samples consist of elliptical/spherical and sheet-like morphology of crystalline particles of 8/30 nm, which are weakly aggregated. Optical absorbance spectra reveal that the absorption of ceria in the UV region originates from the charge- transfer transition between the O²⁻ (2p) and Ce⁴⁺ (4f) orbit in CeO₂. However, α–Mn₂O₃ nanostructures with nearly pure band gap emission should be of importance for their applications as UV emitters.     

Designing of luminescent GdPO4:Eu@LaPO4@SiO2 core/shell nanorods: Synthesis,structural and luminescence properties

GdPO₄:Eu³⁺ (core) and GdPO₄:Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared by urea based co-precipitation process at ambient conditions which was followed by coating with amorphous silica shell via the sol-gel chemical route. The role of surface coating on the crystal structure, crystallinity, morphology, solubility, surface chemistry and luminescence properties were well investigated by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX) analysis, Fourier Transform Infrared (FTIR), UV-Vis, and photoluminescence spectroscopy. XRD pattern revealed highly purified, well-crystalline, single phase-hexagonal-rhabdophane structure of GdPO₄ crystal. The TEM micrographs exhibited highly crystalline and narrow size distributed rod-shaped GdPO₄:Eu³⁺ nanostructures with average width 14–16 nm and typical length 190–220 nm. FTIR spectra revealed characteristic infrared absorption bands of amorphous silica. High absorbance in a visible region of silica modified core/shell/Si NRs in aqueous environment suggests the high solubility along with colloidal stability. The photoluminescence properties were remarkably enhanced after growth of undoped LaPO₄ layers due to the reduction of nonradiative transition rate. The advantages of presented high emission intensity and high solubility of core/shell and core/shell/Si NRs indicated the potential applications in monitoring biological events.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

CTAB-assisted hydrothermal synthesis of YVO4:Eu powders in a wide pH range

Rhombus-, rod-, soya bean- and aggregated soya bean-like YVO₄:Eu³⁺ micro- and nanostructures were synthesized by a cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal method at 180 °C for 24 h in a wide pH range. The as-synthesized powders were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photoluminescence spectroscopy (PL). The XRD results confirmed the formation of phase-pure YVO₄:Eu³⁺ powders with tetragonal structure under hydrothermal process in a wide pH range. Electron microscopic observations evidenced the morphological transformation of YVO₄:Eu³⁺ powders from rhombus-like microstructure to rod-, soya bean, and aggregated soya bean-like nanostructures with an increase in the pH of the synthesis solution. The results from the PL measurements revealed that the intensities of PL emission peaks were significantly affected by the morphologies and crystallinity of samples due to the absence of an inversion symmetry at the Eu³⁺ lattice site, and the highest luminescence intensity was observed for rod-like YVO₄:Eu³⁺ powders.     

Structure and optical properties of cerium(III)-doped PbWO4 micro-crystals synthesized by a facile wet chemical method

Cerium(III) doped PbWO₄ micro-crystals with different doping contents were synthesized via a facile wet chemical method in air atmosphere at room temperature. X-ray diffraction patterns of as-synthesized powders revealed that these micro-crystals were pure scheelite PbWO₄, without any impurities such as Ce₂(WO₄)₃ and PbO, and Ce³⁺ could enter into Pb²⁺ sites, which would induce the formation of lead vacancies in the PbWO₄ crystal lattice. The UV–vis diffuse reflection spectra, Raman spectra and photoluminescence (PL) spectra of doped and pure PbWO₄ micro-crystals were studied in detail, which indicated that optical properties of doped PbWO₄ were greatly changed. The adsorption edge of Ce(III)-doped PbWO₄ micro-crystals would shift toward high wavelength (red-shift) with gradually increasing Ce³⁺ doping concentration. It shows an obvious decrease in blue emission band which made the shape of the whole emission band remodeled with the Ce³⁺ doping.     

Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

Synthesis and characterization of novel blue emitting Na2CaSiO4:Ce3+ phosphor

The blue phosphors Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ were synthesized by the sol–gel method and their luminescence characteristics were investigated for the first time. Structural information about prepared samples is obtained by analyzing the XRD patterns and SEM micrographs. The photoluminescence (PL) excitation spectra indicate that the Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors can be effectively excited by ultraviolet (360 nm) light. The PL emission spectra exhibit tunable blue broadband emission with the dominant wavelength of 427–447 nm under excitation of 360 nm by controlling the doping concentration of Ce³⁺. The concentration quenching effect for Ce³⁺ was found at the optimum doping concentration of 4 mol%. The Commission Internationale de l’Eclairage 1931 chromaticity coordinates of Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ are (0.1447, 0.0787), which are better color purity compared to the commercial Eu²⁺-doped BaMgAl₁₀O₁₇ phosphor. Na_1.96Ca_0.96SiO₄:0.04Ce³⁺ composition shows intense blue emission (peak wavelength, 439 nm) with relative intensity versus commercial BaMgAl₁₀O₁₇:Eu²⁺ blue phosphor (Nichia) 65 and 158 % under 254 and 365 nm excitation, respectively. All the results indicate that Na_(2?x)Ca_(1?x)SiO₄:xCe³⁺ phosphors are potential candidate as a blue emitting phosphor for UV-converting white light-emitting diodes.     

Fabrication and optical properties of core-shell structured spherical SiO2@GdVO4:Eu phosphors via sol-gel process

Europium-doped nanocrystalline GdVO₄ phosphor layers were coated on the surface of preformed submicron silica spheres by sol-gel method. The resulted SiO₂@Gd_0.95Eu_0.05VO₄ core-shell particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, low voltage cathodoluminescence (CL), time resolved PL spectra and kinetic decays. The XRD results demonstrate that the Gd_0.95Eu_0.05VO₄ layers begin to crystallize on the SiO₂ spheres after annealing at 600 ^°C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have spherical shape, narrow size distribution (average size ca. 600 nm), non-agglomeration. The thickness of the Gd_0.95Eu_0.05VO₄ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). PL and CL show that the emissions are dominated by ⁵D₀-⁷F₂ transition of Eu³⁺ (618 nm, red). The PL and CL intensities of Eu³⁺ increase with increasing the annealing temperature and the number of coating cycles. The optimum concentration for Eu³⁺ was determined to be 5 mol% of Gd³⁺ in GdVO₄ host.     

Sol-gel deposition and luminescent properties of LaMgAl11O19:Ce/Tb phosphor films

Rare earth ions (Ce³⁺, Tb³⁺)-doped LaMgAl₁₁O₁₉ phosphor films were deposited on quartz glass substrates by Pechini sol-gel and dip coating method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscopy (AFM), field emission scanning electronic microscopy (FESEM), photoluminescence (PL) spectra, and lifetimes were used to characterize the resulting films. The results of XRD indicated that the magnetoplumbite structure LaMgAl₁₁O₁₉ phase can be obtained at 1200 °C on quartz glass substrates. This was further verified by the results of FT-IR and TG-DTA. AFM study showed that uniform films have an average grain size of 150 nm and a root mean square (RMS) roughness of 4 nm. The thickness of the films characterized by FESEM is about 340 nm. LaMgAl₁₁O₁₉:Ce³⁺ film showed the parity and spin allowed 5d-4f band emission of Ce³⁺ with a maximum at 350 nm. Ce³⁺, Tb³⁺-codoped LaMgAl₁₁O₁₉ films showed the band emission of Ce³⁺ and characteristic emission of Tb³⁺, namely, ⁵D_3,4-⁷F_J (J=6, 5, 4, 3) due to an efficient energy transfer from Ce³⁺ to Tb³⁺ in the host.     

Optical characteristics of europium and terbium doped strontium orthogermanate phosphors

In this work, europium and terbium activated Sr₂GeO₄ phosphors were successfully developed by traditional solid state method. Powders XRD, FESEM, EDS, FTIR, DRS and PL techniques have been used to probe the as prepared phosphors. Powder XRD patterns of the phosphors are indexed. The elemental composition of phosphors was obtained from their EDS. FTIR spectra are employed to detect different vibrational groups in phosphor compositions. The DRS profiles of both pristine and Eu³⁺ (Tb³⁺) substituted samples exhibit broad and strong band in the 230–370 ​nm region. The photoluminescence studies of europium and terbium doped phosphors exhibited optimistic red emission at 617 ​nm (⁵D₀ → ⁷F₂ of Eu³⁺ ions) and intense green emission at 543 ​nm (⁵D₄ → ⁷F₅ of Tb³⁺ ions) upon ultraviolet (UV) excitations respectively. The CIE chromaticity co-ordinates are produced in deep red and green regions. Therefore, these materials may become potential alternatives for red and green phosphors in the display devices and in lamp industry.     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

Cu–Ce substituted cobalt nano ferrite - Structural,morphological, and magnetic behavior prepared by sol-gel auto-combustion

Sol-gel auto-combustion synthesized Co_1-xCu_xFe_2-yCe_yO₄ (x = 0.0, 0.25, 0.5 and 0.75; y = 0.0, 0.03, 0.06, and 0.09), Cu–Ce substituted Co ferrite nanopowders. Investigations have been done on how Cu–Ce substitution affects the structural and magnetic characteristics. The Cu–Ce substitution variation effect on structural and magnetic properties is studied with X-ray diffraction (XRD), Field effect scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and Vibrating sample magnetometer (VSM). The XRD was used to identify the crystal phase, and the role of Cu–Ce substituted for Co indicates how it formed. There is no change in the crystal structure, and no additional characteristic peak linked to Cu²⁺ and Ce³⁺ ions substitution was found in the XRD. The powder was sintered at 1100 °C. The crystallite sizes were found in between 33 and 62 nm. Increasing the Cu–Ce content decreases the lattice constant and is found between 8.4044 and 8.3309 Å. The FESEM images were used to analyze the nanostructural properties. The range of 110–128 nm is the value of average grain size. Two vibrational bands can be seen in FTIR spectra at about 600 cm⁻¹ (v₁) and 400 cm⁻¹ (v₂). They are attributed to the spinel lattices A and B sites, respectively. The tetrahedral site has a greater vibrational frequency of 566.09 cm^−1, while the octahedral site has a lower vibrational frequency of 420.09 cm⁻¹. FTIR spectra show the tetrahedral stretching peaks shifting towards lower frequencies with increasing Cu²⁺ and Ce³⁺ ions content. At ambient temperature, the magnetic properties of Cu–Ce substituted cobalt ferrites revealed a strong hysteresis loop. There was a decrease in magnetic saturation and an increase in coercivity.     

VUV-UV Photoluminescence Spectra of Strontium Orthophosphate Doped with Rare Earth Ions

The measurements of VUV-UV photoluminescence emission (PL) and photoluminescence excitation (PLE) spectra of rare earth ions activated strontium orthophosphate [Sr₃(PO₄)₂:RE, RE = Ce, Sm, Eu, Tb] are performed. Whenever the samples are excited by VUV or UV light, the typical emission of Ce³⁺, Sm³⁺, Eu³⁺, Eu²⁺ and Tb³⁺ ions can be observed in PL spectra, respectively. The charge transfer bands (CTBs) of Sm³⁺ and Eu³⁺ are found, respectively, peaking at 206 and 230 nm. The absorption bands peaking in the region of 150-160 nm are assigned to the host lattice sensitization bands, i.e., the band-to-band transitions of PO₄³⁻ grouping in Sr₃(PO₄)₂. It is speculated that the first f-d transitions of Sm³⁺ (Eu³⁺), and the CTB of Tb³⁺are, respectively, located around 165 (1 4 3) and 167 nm by means of VUV-UV PLE spectra and relational empirical formula, these f-d transitions or CT bands are included in the bands with the maxima at 150-160 nm, respectively. The valence change of europium from trivalent to divalent in strontium orthophosphate prepared in air is observed by VUV-UV PL and PLE spectra.     

CaF2对CaO-CaF2-B2O3-SiO2：Sm2O3玻璃的光致发光增强效应

用高温熔融法制备了掺杂Sm₂O₃的CaO-CaF₂-B₂O₃-SiO₂(CFBS:Sm)发光玻璃材料, 并借助X射线衍射(XRD)谱、傅里叶变换红外(FTIR)光谱以及光致发光(PL)光谱等分析手段研究了玻璃基体中CaF₂的摩尔分数及其结构、红外透过性能以及荧光性能的关系. XRD和FTIR测试表明, 玻璃基体中引入CaF₂并未引起非晶结构的变化但其红外透过峰发生移动. 光谱学测试表明, CFBS:Sm发光玻璃在404 nm波长激发下出现对应于Sm³⁺离子位于566、603和650 nm的特征荧光峰, 其发光颜色为橙红色(x=0.531, y=0.371). 此外, 随着玻璃基体中CaF₂摩尔分数的增加, CFBS:Sm发光玻璃的荧光发射强度、荧光寿命(Sm³⁺的⁴G_5/2能级)和荧光量子效率也表现出增大的趋势. 这种CFBS:Sm发光玻璃中荧光发射强度和荧光寿命的提高主要是由于玻璃基体中的CaF₂替代CaO引起基体相互作用和声子能量降低、无辐射跃迁减弱造成的.     

Synthesis and characterization of Eu-doped hydroxyapatite through a microwave assisted microemulsion process

Europium doped hydroxyapatite (Eu:HAp) nanosized particles with multiform morphologies have been successfully prepared via a simple microemulsion-mediated process assisted with microwave heating. The physicochemical properties of the samples were well characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra, and the kinetic decays, respectively. The results reveal that the obtained Eu:HAp particles are well assigned to the hexagonal lattice structure of the hydroxyapatite phase. Additionally, it is found that samples exhibit uniform morphologies which can be controlled by altering the pH values. Furthermore, the samples show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺ excited by UV radiation.     

Synthesis and photoluminescence properties of tunable emission phosphors Ca4Si2O7F2:Ce3+

The Ce³⁺ activated phosphors Ca₄Si₂O₇F₂:Ce³⁺ are prepared by a solid state reaction technique. The UV–vis luminescence properties as well as fluorescence decay time spectra are investigated and discussed. The results revealed that there were two kinds of Ce³⁺ luminescence behavior with 408 and 470 nm emissions, respectively. Under 355 nm excitation, the Ce(1) emission (408 nm) is dominant at low doping concentration, and then the Ce(2) emission (470 nm) get more important with increasing of Ce³⁺ concentrations in the host. The phosphors Ca₄Si₂O₇F₂:xCe³⁺ show tunable emissions from blue area to green-blue area under near-ultraviolet light excitation, indicating a potential application in near-UV based w-LEDs.