Magnetic hybrid modified electrodes, based on magnetite nanoparticle containing polyaniline and poly(3,4-ethylenedioxythiophene)

In this paper, we report on the direct electrodeposition of magnetic hybrids based on magnetite nanoparticle containing poly(3,4-ethylenedioxythiophene) (PEDOT) and polyaniline (PANI) in the presence of magnetite and the special conducting electrolyte, potassium tetraoxalate. The optimal electropolymerization processes (monitored by scanning electron microscopy) were performed potentiostatically, and the incorporation of the iron oxide into the polymeric film was demonstrated by Diffuse Reflectance UV-Visible Spectroscopy (DR-UV?Cvis) and transmission electron microscopic measurements. Electrochemical quartz crystal nanobalance proved that both the neat PEDOT and the PEDOT/magnetite hybrid show anion exchange behaviour. Cyclic voltammetric features of the polymers and their hybrids exhibited an enhanced redox capacity of the composites. The difference in the effect of the scanning rate on this capacity increase in the two cases could be interpreted by the assumption that the presence of magnetite manifests dominantly in the enhanced intrinsic electroactivity of PANI, while in the case of the PEDOT composite, the extra charge is more connected to the charge surplus originating from the redox activity of the nanoparticles.     

Synthesis and characterization of polypyrrole–magnetite–vitamin B12 hybrid composite electrodes

In this study vitamin B12 covered magnetite nanoparticles have been incorporated into a conducting polypyrrole. This polymer was electrochemically synthesized in the presence of the B12-coated magnetite. The adsorption of B12 was demonstrated by the decrease in absorbance of the vitamin in the supernatant liquid after B12 has been in contact with magnetite sol overnight. The composition of the layers was studied by the electrochemical quartz crystal microbalance technique during the polymerization. The slope of the mass change–charge curves indicate the incorporation of 27 m/m% magnetite and 15 m/m% B12. The redox transformation of the film in monomer- and nanoparticle-free solutions was also investigated by this method and the difference in the virtual molar masses of the moving species was evidenced. The morphology and the composition of the layers were characterized by scanning electron microscopy combined with energy dispersive X-ray microanalysis measurements, which latter proved the successful incorporation of the magnetic and bio-active components. The electrochemical behavior of the films unambiguously showed the complex redox activity of the composites and the current surplus were quantified by the redox capacity of the layers. These data show the doubling of the redox capacity in case of the hybrid material compared to the neat polymer. The successful enrichment of B12 can be exploited in the recently evidenced redox mediation process performed by a PPy/B12 film.     

Micelle-assisted synthesis of polyaniline/magnetite nanorods by in situ self-assembly process

Polyaniline/magnetite nanocomposites consisting of polyaniline (PANI) nanorods surrounded by magnetite nanoparticles were prepared via an in situ self-assembly process in the presence of PANI nanorods. The synthesis is based on the well-known chemical oxidative polymerization of aniline in an acidic environment, with ammonium persulfate (APS) as the oxidant. An organic acid (dodecylbenzenesulfonic acid, DBSA) was used to replace the conventional strong acidic (1 M HCl) environment. Here, dodecylbenzenesulfonic acid is used not only as dopant, but also as surfactant in our reaction system. So, DBSA can excellently control the morphology and size of PANI nanorods and magnetite particles. Magnetite particles were formed simultaneously during sedimentation, and the formed nanorods were also decorated by the particles. The resulting PANI/magnetite composites were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). It is found that PANI/magnetite nanorod composites have uniform size, superparamagnetism and a small mass fraction of magnetite, thermal stabilization even at a higher temperature.     

Effective charge propagation and storage in hybrid films of tungsten oxide and poly(3,4-ethylenedioxythiophene)

Hybrid (composite) electroactive films consisting of such an organic conducting polymer as poly(3,4-ethylenedioxythiophene), PEDOT, and such a polynuclear inorganic compound as amorphous tungsten oxide, WO₃/H _x WO₃ were fabricated on carbon electrodes through electrodeposition by voltammetric potential in acid solution containing EDOT monomer and sodium tungstate. Electrostatic interactions between the negatively charged tungstic units (existing within WO₃) and the oxidized positively charged conductive polymer (oxidized PEDOT) sites create a robust hybrid structure which cannot be considered as a simple mixture of the organic and inorganic components. It is apparent from scanning electron microscopy that hybrid structures are granular but fairly dense. Because PEDOT and mixed-valence tungsten oxides are electronically conducting, the resulting hybrid films are capable of fast propagation. The reversible and fast redox reactions of tungsten oxide component lie in the potential range where PEDOT matrix is conductive. Furthermore, the hybrid films exhibit good mediating capabilities towards electron transfers between model redox couples such as cationic iron(III,II) and anionic hexacyanoferrate(III,II). Since the films accumulate effectively charge and show high current densities at electrochemical interfaces, they could be of importance to electrocatalysis and to construction of redox capacitors.     

Ascorbic Acid Oxidation at Nonmodified and Copper‐Modified Polyaniline and Poly‐ortho‐methoxyaniline Coated Electrodes

The electrochemical oxidation of ascorbate ions is comparatively studied at polyaniline (PANI) and poly‐ortho‐methoxyaniline (POMA) layers in absence and presence of electrodeposited copper species. In comparison to PANI, POMA layers allow decreasing the overpotential necessary for driving the ascorbate oxidation reaction. A nonlinear dependence of the ascorbate oxidation current on the polymer layer redox charge is found. Copper electrodeposited in PANI and POMA layers is electrocatalytically active for the investigated reaction. Two separate oxidation waves are observed in the case of Cu‐PANI whereas a single ascorbate oxidation wave and enhanced currents are found in the Cu‐POMA case.     

A nanocomposite made from conducting organic polymers and multi-walled carbon nanotubes for the adsorption and separation of gold(III) ions

We describe a new method for the separation and preconcentration of traces of Au(III) in environmental samples. Sorbents made from modified multiwalled carbon nanotubes and conducting polymers (PANI and PEDOT) were used for solid-phase extraction. The Au(III) ions are adsorbed as a result of the interaction with the electron pairs of =N- and -S- groups. Effects of pH value, flow rate and volume of sample, type, volume and concentration of eluent, and the adsorption capacity were investigated. The maximum adsorption capacity of MWCNTs/PANI and MWCNTs/PEDOT are 159 and 176?mg?g^?1, and the detection limits of this method are below 0.3 and 0.5?ng?mL^?1, respectively. The procedure was successfully applied to the determination of traces of Au(III) in a reference material and in environmental samples.

Nanostructured polyaniline-coated anode for improving microbial fuel cell power output

An approach for improving the power generation of a dual-chamber microbial fuel cell by using a nanostructured polyaniline (PANI)-modified glassy carbon anode was investigated. Modification of the glassy carbon anode was achieved by the electrochemical polymerisation of aniline in 1 M H₂SO₄ solution. The MFC reactor showed power densities of 0.082 mW cm^?2 and 0.031 mW cm^?2 for the nano- and microstructured PANI anode, respectively. The results from electron microscopy scanning confirmed formation of the nanostructured PANI film on the anode surface and the results from electrochemical experiments confirmed that the electrochemical activity of the anode was significantly enhanced after modification by nanostructured PANI. Electrochemical impedance spectroscopic results proved that the charge transfer would be facilitated after anode modification with nanostructured PANI.     

聚苯胺-还原氧化石墨烯复合材料的比电容及超级电容性能

Flaky polyaniline-reduced graphene oxide (PANI-rGO) composites have larger specific capacitance due to the improved redox charge of PANI in the composites, fabricated by simultaneous reduction of PANI-GO. The structural and morphological analyses were carried out using scanning electron microscopy, UV-Vis spectroscopy, and thermogravimetry. The results showed that the composites are flaky in shape. PANI is uniformly coated on GO, and PANI-rGO has specific capacitance as high as 1069 F·g^-1 (1.71 F·cm^-2) at a current density of 20 A·g^-1, 5 times higher than PANI-GO; this is caused by the large surface and conductivity of the rGO in the composite.     

Preparation and measurement of properties of BiOBr/BiOCl/PANI ternary nanocomposite for highly efficient visible light photocatalytic applications

In this paper, we report the synthesis of the BiOBr/BiOCl/PANI ternary nanocomposite using a simple co-precipitation method. The modified photocatalyst produced was characterized by the FT-IR, FE-SEM equipped with EDS (as a Map), TEM, XRD, PL, Raman, and UV–Vis DRS analytical techniques. The synergetic effect of PANI and surface defects in nanoplates can prolong the recombination rate of photo-generated charge carriers. Thus, photocatalytic and photoelectrochemical activities of samples have been studied. Then, the methyl orange (MO) degradation performance of PANI/BiOBr and BiOBr/BiOCl/PANI was investigated under visible light irradiation. The lamp used to simulate sunlight in this photocatalytic study process was power down white light (5-W LED), less reported. The results got exhibited that the as-prepared BiOBr/BiOCl/PANI (90:10, Bi:PANI) nanocomposite showed a higher photocatalytic efficiency. Based on the scavenger tests, ^·O₂^? played a significant role in the degradation of MO. The connection between BiOBr, BiOCl, and PANI improved photocatalytic activity, which enhanced migration rate of the photo-generated electrons besides limiting the recombination of photo-generated electron–hole pairs.

     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

功能化石墨烯/聚苯胺复合电极材料的制备和电化学性能

利用水合肼还原十八胺（ODA）接枝的氧化石墨烯（GO）,得到了十八胺功能化石墨烯（ODA-G）,将ODAG与聚苯胺（PANI）通过溶液共混法,制备了功能化石墨烯和聚苯胺纳米复合材料（ODA-G/PANI）. 采用傅里叶变换红外（FTIR）光谱、X射线衍射（XRD）、热重分析（TGA）、拉曼（Raman）光谱及透射电镜（TEM）,对复合材料的结构和形貌进行了表征;利用循环伏安、恒流充放电及交流阻抗谱等,对复合材料的电化学性能进行了测试. 结果显示,少量ODA-G的引入为PANI 的电化学氧化还原反应提供了更多的电子通道和活性位置,有利于提高PANI 的赝电容. 在电流密度1.0 A·g^-1下,2%（w）ODA-G/PANI 的比电容达到787 F·g^-1,而相应的PANI 仅有426 F·g^-1. 此外,ODA-G/PANI的循环稳定性也远高于纯PANI.     

One-step synthesis of PANI/Mn3O4 nanocomposites and evaluation of their electrochemical properties

In this paper, we have developed a simple, facile, and efficient approach to synthesize polyaniline/Mn₃O₄ (PANI/Mn₃O₄) nanocomposites using aniline as a reducer in the presence of KMnO₄ without any additives or templates. The morphology of the composites is characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results demonstrate that the tetrahedral Mn₃O₄ nanoparticles have uniform sizes and are finely dispersed in the PANI matrix. The crystallinity and chemical constituents of the composites are characterized by powder X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR) and UV-vis spectrophotometry. Moreover, cyclic voltammetry (CV) measurements are used to characterize the electrochemical properties of PANI/Mn₃O₄ nanocomposites. The developed materials give a pair of redox peaks and have better operation stability, which indicates that the composites show distinct electrochemical performance. So the PANI/Mn₃O₄ nanocomposites would have potential applications in bioanalysis, biodetection and so on.     

还原氧化石墨烯表面聚苯胺纳米阵列的制备及电化学电容性能

本文以阳极氧化铝(AAO)膜为模板,通过恒电位法在自组装还原氧化石墨烯(rGO)膜表面制备有序聚苯胺(PANI)纳米线阵列。通过拉曼光谱和场发射扫描电子显微镜分别对其结构和微观形貌进行了表征,并对PANI纳米线阵列的电化学电容性能进行了测试。结果表明,rGO膜表面可电沉积PANI,电沉积得到的PANI纳米线阵列具有比PANI薄膜材料更高的电容和比电容。     

聚苯胺/碳纳米纤维复合材料的制备及电容性能

采用原位聚合法制备了聚苯胺/碳纳米纤维(PANI/CNF)复合材料,用傅里叶变换红外(FT-IR)光谱、热重分析(TGA)、扫描电镜(SEM)和孔分布及比表面积测定仪研究了复合材料的表面官能团、组成、表面形貌及比表面积,并运用循环伏安(CV)法和计时电位法测试了PANI/CNF布作为电极材料的电化学性能.研究结果表明:PANI/CNF复合材料具有粗糙的毛刺结构,PANI沿碳纳米纤维均匀分布;PANI/CNF电极氧化还原反应的可逆性良好;在100mA·g-1电流密度下,当PANI含量为44.4%(w)时,复合材料比电容量高达587.1F·g-1,比能量为66.1Wh·kg-1,电流密度为800mA·g-1时比功率可达1014.2W·kg-1;在5A·g-1的电流密度下,1000次循环充放电后,复合材料的比电容量衰减28%.PANI/CNF复合材料具有良好的导电性和快速充放电能力,是一种优良的超级电容器电极材料.     

An Advanced NiCoFeO/Polyaniline Composite for High‐Performance Supercapacitors

To reduce the charge‐transfer resistance of supercapacitors and achieve faster reversible redox reactions, ternary Ni‐Co‐Fe layered double hydroxide was prepared by using the urea method and then calcined to give NiCoFe oxide (NiCoFeO). To enhance conductivity, a polyaniline (PANI) conductive layer was assembled on the surface of the NiCoFeO particles by in situ oxidative polymerization of aniline monomers. The as‐prepared NiCoFeO/PANI composite was successful employed as a supercapacitor electrode. It was found that the NiCoFeO/PANI composite displayed good cycling stability, with a capacity loss of only 29.54 % after 5000 cycles. Furthermore, the NiCoFeO/PANI composite also exhibited excellent supercapacitor performance, with a high specific capacity of 843 F g^?1 at a current density of 2 A g^?1, whereas NiCoFeO showed a specific capacity of only 478 F g^?1. This result was attributed to the synergistic effect between NiCoFeO and PANI. The facile synthesis strategy and excellent electrochemical performance suggest that NiCoFeO/PANI is a promising economical electrode material for applications in supercapacitors.     

聚合时间对染料敏化太阳能电池中聚苯胺对电极结构和性能的影响

采用恒电压方法, 以掺杂氟的SnO₂ (FTO)导电玻璃为基底, 采用不同的聚合时间制备SO₄^2?掺杂的聚苯胺对电极(PANI CEs). 利用扫描电子显微镜(SEM)、紫外-可见(UV-Vis)吸收光谱、循环伏安法(CV)和电化学阻抗谱(EIS)等技术详细研究了聚合时间对PANI CEs的表面形貌、结构(如掺杂度、共轭性、氧化态等)和对I^?/I^3?的催化活性的影响. SEM结果表明PANI在FTO上的生长分两个阶段. 适当增加聚合时间可以增加PANI CEs的比表面积, 为催化I^?/I^3?反应提供更多的活性位点, 同时聚苯胺链的共轭性、半氧化态聚苯胺(EB)结构的含量和对阴离子SO₄^2?的掺杂度会随着增加, 进而PANI 的导电率也逐渐增大. 然而, 聚合时间过长会引起薄膜厚度的增加和氧化结构的过多, 使PANI CEs的导电率降低, 电子在PANI 薄膜中的传输阻抗增加, 进而影响其对I^?/I^3?的催化性能. 聚合时间为300 s 时制备出的PANI 薄膜作为染料敏化太阳能电池(DSSCs)对电极和以D149 为染料时, 获得的最高电池光电转换效率为5.30%, 可达到基于Pt 对电极电池效率的88%. 因此, 通过电化学方法制备的PANI CEs有望代替贵金属Pt CEs用于DSSCs中.     

Effect Nd2O3 content on electrochemical performance of polyaniline/Nd2O3 composites

Polyaniline/neodymium(III) oxide (PANI/Nd₂O₃) composites were synthesized by in situ chemical oxidative polymerization method, and the new electrode materials were used for supercapacitor. The composites were characterized physically by scanning electron microscope (SEM), Fourier transform infrared spectra (FTIR) and X‐ray diffraction (XRD). SEM, IR and XRD results showed the existence of interactions between PANI and Nd₂O₃. The electrochemical capacitance performance of the composites was investigated by cyclic voltammetry, galvanostatic charge–discharge tests and ac impedance spectroscopy with a three‐electrode system in 6 M KOH solution. Cyclic voltammetry and galvanostatic charge/discharge tests proved that the addition of Nd₂O₃ enhanced the capacitance of the composites. However, the conductivity of the composites decreases with increasing the amount of Nd₂O₃. Electrochemical impedance tests manifest that the charge‐transfer resistance of the composites is smaller than that of the pure PANI, which indicates the addition of Nd₂O₃ could lower resistance and facilitate the charge transfer of the active materials. All results support that Nd₂O₃ has a significant contribution to the performance of PANI and makes the composites have more active sites for faradiac reaction and larger specific capacitance than pure PANI. Copyright © 2014 John Wiley & Sons, Ltd.     

纳米纤维聚苯胺在电化学电容器中的应用

采用脉冲电流方法（PGM）合成了具有纳米纤维结构的导电聚苯胺（PANI）.扫描电子显微镜对膜层观察表明, PANI膜是由直径约为100 nm的掺杂态聚苯胺纤维交织而成.以纳米纤维状聚苯胺组成电化学电容器,研究了其电化学电容性能,并与恒电流方法（GM） 制备的颗粒状PANI电容器性能进行了比较.结果表明,在相同的沉积电量下,PGM制备的纳米纤维状PANI电化学电容器比颗粒状PANI电化学电容器具有更大的电容容量,其电化学电容器的比电容可高达699 F•g－1,能量密度为54.6 Wh•kg－1.并且该电化学电容器具有良好的充放电性能和循环寿命.     

Preparation and spectroelectrochemical characterization of composite films of poly(3,4-ethylenedioxythiophene) with 4-(pyrrole-1-yl) benzoic acid

The possibility of incorporation of 4-(pyrrole-1-yl) benzoic acid, PyBA, during electrodeposition of poly(3,4-ethylenedioxythiophene), PEDOT, is demonstrated here. The resulting novel composite material has been fabricated as moderately thin (ca 200–300 nm thick) PEDOT/PyBA film on electrode surface. As evidenced from scanning tunneling microscopy (STM) and scanning electron microscopy (SEM), morphology of the composite film is dense and granular, and it is composed of larger granules in comparison to the PyBA-free PEDOT film. It is apparent from infrared reflectance absorption spectroscopy and spectroelectrochemical measurements that the PEDOT/PyBA composite film cannot be viewed as simple mixtures of PEDOT and PyBA components. Some specific (chemical) interactions between PEDOT and PyBA can be expected. The conducting polymer serves as a robust, positively charged conductive polmer matrix for anionic (carboxylate-group derivatized) partially polymerized PyBA structures. Upon incorporation of PyBA, the overall stability of PEDOT film (resistance to dissolution during prolonged voltammetric potential cycling) has been improved. The fact, that the composite PEDOT/PyBA film is capable of preconcentrating (under open circuit conditions) both cations (Cu²⁺) or anions implies the presence of both free (available for binding) carboxylate groups and positively charged PEDOT sites. The presence of PyBA in PEDOT seems to facilitate charge propagation in the composite film. “Contribution to the International Workshop on Electrochemistry of Electroactive Materials (WEEM-2006), Repino, Russia, 24–29 June 2006”.