Sampling 4-chlorophenol in water by DGT technique with molecularly imprinted polymer as binding agent and nylon membrane as diffusive layer

For the first time, a diffusive gradients in thin films (DGT) device using molecularly imprinted polymer (MIP) as the binding agent and nylon membrane (NM) as the diffusive layer (NM-MIP-DGT) has been developed for sampling 4-chlorophenol (4-CP) in water. The MIP was prepared by precipitation polymerization with methacrylic acid as monomer and ethyleneglycoldimethacrylate as cross-linker. The diffusion coefficient of 4-CP through NM was obtained to be 0.788 ± 0.040 μ cm² s⁻¹ by diffusion cell method. The ratio was 1.01 ± 0.05 (mean ± standard deviation) for the concentration of 4-CP sampled by NM-MIP-DGT and analyzed by HPLC method to the total concentration of 4-CP in the synthetic solution where free 4-CP species dominated. The results showed that NM-MIP-DGT could sample 4-CP in synthetic solution accurately. The performance of NM-MIP-DGT for sampling 4-CP was independent of pH in the range of 3–7 and ionic strength in the range of 0.0001–0.1 mol L⁻¹ NaCl solution. The concentration of free form of 4-CP sampled by NM-MIP-DGT decreased with the increasing concentration of dissolved organic carbon in different water samples due to the electrostatic interaction of natural organic compounds with 4-CP. 1.8 mg L⁻¹ of the free form of 4-CP was determined by HPLC which was sampled by NM-MIP-DGT in an intermediate untreated industrial effluent. The NM-MIP-DGT can be a potential passive tool for sampling the free form of 4-CP in water.     

Purge-and-trap ion chromatography for the determination of trace ammonium ion in high-salinity water samples

It has always been assumed that purge-and-trap (P&T) method is only used for the analysis of volatile organic compounds (VOCs) in aqueous samples. In this paper, a novel P&T preconcentrator has been developed for the determination of trace amounts of ammonium ion in high-salinity water samples by ion chromatography (IC). Method performance is evaluated as a function of concentration of assistant purging material, purging time, and flow rate. Under the optimum P&T conditions with the purified nitrogen gas at flow rate 40 mL/min for 15.0 min at 40 degrees C, the overall collection efficiency is independent of the concentration of ammonium over the range 1.2-5.9 microM. The enrichment factor (EF) of ammonium correlates the ratio of the sample volume to the acceptor solution volume in the trap vessel, providing potentially unlimited increase of the ammonium signal. Our results indicate that environmental samples with low levels of ammonium in matrices with high concentrations of sodium can be easily analyzed and the detection limit down to 75 nM (1.35 ppb) level, corresponding to picomole of ammonia in the injected sample. Calibration graph was constructed with ammonium standards ranging from 0.05 to 6.0 microM and the linearity of the present method was good as suggested by the square of correlation coefficients being better than 0.997. Thus, we have demonstrated that the P&T-IC method allows the routine determination of ammonium ion in seawater samples without cation interferences.     

In situ selective determination of methylmercury in river water by diffusive gradient in thin films technique (DGT) using baker's yeast (Saccharomyces cerevisiae) immobilized in agarose gel as binding phase

Saccharomyces cerevisiae immobilized in agarose gel as binding phase and polyacrylamide as diffusive layer in the diffusive gradient in thin films technique (DGT) was used for selective determination of methylmercury (MeHg). Deployment tests showed good linearity in mass uptake up to 48 h (3276 ng). When coupling the DGT technique with Cold Vapor Atomic Fluorescence Spectrometry, the method has a limit of detection of 0.44 ng L⁻¹ (pre concentration factor of 11 for 48 h deployment). Diffusion coefficient of 7.03 ± 0.77 × 10⁻⁶ cm² s⁻¹ at 23 °C in polyacrylamide gel (pH = 5.5 and ionic strength = 0.05 mol L⁻¹ NaCl) was obtained. Influence of ionic strength (from 0.0005 mol L⁻¹ to 0.1 mol L⁻¹ NaCl) and pH (from 3.5 to 8.5) on MeHg uptake were evaluated. For these range, recoveries of 84–105% and 84–98% were obtained for ionic strength and pH respectively. Potential interference due to presence of Cu, Fe, Mn, Zn was also assessed showing good recoveries (70–87%). The selectivity of the proposed approach was tested by deployments in solutions containing MeHg and Hg(II). Results obtained showed recoveries of 102–115 % for MeHg, while the uptake of Hg(II) was insignificant. The proposed approach was successfully employed for in situ measurements in the Negro River (Manaus-AM, Brazil).     

Trace metal speciation measurements in waters by the liquid binding phase DGT device

The speciation measurements of trace metals by the diffusive gradients in thin-films technique (DGT) using a poly(4-styrenesulfonate) (PSS) aqueous solution as a binding phase and a cellulose dialysis membrane (CDM) as a diffusive layer, CDM-PSS DGT, were investigated and showed good agreement with computer modelling calculations. The diffusion coefficients of ethylenediaminetetraacetic acid (EDTA) complexes with Cd²⁺ and Cu²⁺ were measured and compared with those of the inorganic metal ions. CDM-PSS DGT device was tested for speciation measurement in sample solutions containing EDTA, tannic acid (TA), glucose (GL), dodecylbenzenesulfonic acid (DBS) and humic acid (HA) as complexing ligands forming organic complexes with varying stability constants. Lower percentages of DGT labile copper concentrations over total filterable copper concentrations obtained from the deployments in freshwater sites indicated that copper complexes with organic matter were basically not measured by the devices.     

Headspace-solid phase microextraction of selenium(IV) from human blood and water samples using polypyrrole film and analysis with ion mobility spectrometry

The analysis of incurred material from animals treated with pharmacologically active substances is an efficient way to check the accuracy of a method. Tylosin A was chosen for the preparation of that material because it is highly effective in controlling active infections of American Foulbrood (AFB), a global threat to apiculture, but residues in honey are not allowed according to European legislation. For this reason an in-house reference material of honey containing the macrolide tylosin A and its degradation product desmycosin (tylosin B) was prepared. After the treatment of a beehive with the appropriate macrolide tylosin A, the honey samples were collected. The incurred honey material was diluted by mixing with blank honey. Concentrations of 25.81 μg kg(-1) for tylosin A and of 19.28 μg kg(-1) for its degradation product desmycosin (tylosin B) were reached. The homogeneity was checked by analysing 12 bottles in duplicate. The stability was tested at different defined temperatures and storage conditions. The reference material described above was homogeneous and stable. Samples of this in-house reference material were used for the realisation of a proficiency test with international participation. All participants accomplished satisfying results with the exception of one laboratory.     

Optimization of ammonium removal from waste water by natural zeolite using central composite design approach

The aims of the present study are to investigate removal of ammonium ion from wastewater using natural Western Azarbaijan zeolite and to optimize effective parameters by experimental design. In order to remove ammonium ions from aqueous solutions, experiments were carried out using column method as functions of the initial ammonium concentration, flow rate and pH of the solution. The results clearly confirmed that all mentioned parameters have vital affects on removing ammonium ions from wastewater and effluents, so got optimized. Central composite design with response surface methodology was applied for the optimization of main experiment parameters. The significance of the independent variables and their interactions were tested by the analysis of variance ANOVA and f-test statistics. Optimization of the variables for maximum removal efficiency by natural zeolite was performed using the quadratic model. The model predicted maximum removal efficiency under the optimum conditions including initial ammonium concentration of 30?mg?l^?1; flow rate of 1?ml?min^?1 and pH 6, which was very close to the experimental value determined in column experiment. The cation exchange capacity of natural Western Azarbaijan zeolite was found to be 1.79?meq?g^?1. Based on the experimental results, it can be concluded that the natural Western Azarbaijan zeolite has an excellent potential for removing ammonium ions from aqueous solutions and it is suggested as a suitable material for wastewater treatment.     

Evaluation and application of Diffusive Gradients in Thin Films (DGT) technique using Chelex-100, Metsorb™ and Diphonix binding phases in uranium mining environments

A new resin- Diphonix^® in Diffusive Gradients in Thin Films (DGT) technique for the determination of uranium was investigated and compared with previously used binding phases for uranium, Chelex^®-100 and Metsorb™. The DGT gel preparation and the elution procedure were optimized for the new resin. The U uptake on Diphonix^® resin gel was 97.4 ± 1.5% (batch method; [U] = 20 μg L⁻¹; 0.01 M NaNO₃; pH = 7.0 ± 0.2). The optimal eluent was found to be 1 M 1-hydroxyethane-1, 1-diphosphonic acid (HEDPA) with an elution efficiency of 80 ± 4.2%. Laboratory DGT study on U accumulation using a DGT samplers with Diphonix^® resin showed a very good performance across a wide range of pH (3–9) and ionic strength (0.001–0.7 M NaNO₃). Diffusion coefficients of uranium at different pH were determined using both, a diffusion cell and the DGT time-series, demonstrating the necessity of the implementation of the effective diffusion coefficients into U-DGT calculations. Diphonix^® resin gel exhibits greater U capacity than Chelex^®-100 and Metsorb™ binding phase gels (a Diphonix^® gel disc is not saturated, even with loading of 10.5 μmol U). Possible interferences with Ca²⁺ (up to 1.33 × 10⁻² M), PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$ (up to 1.72 × 10⁻⁴ M), SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$ (up to 4.44 × 10⁻³ M) and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ (up to 8.20 × 10⁻³ M) on U-DGT uptake ([U] = 20 μg L⁻¹) were investigated. No effect or minor effect of Ca²⁺, PO₄³⁻${{\text{PO}}_4}^{3\mathrm{-}}$, SO₄²⁻${{\text{SO}}_4}^{2\mathrm{-}}$, and −HCO₃${{\text{HCO}}_3}^{\mathrm{-}}$ on the quantitative measurement of U by Diphonix^®-DGT was observed. The results of this study demonstrated the DGT technique with Diphonix^® resin is a reliable and robust method for the measurement of labile uranium species under laboratory conditions.     

Extraction and determination of pyridinium ionic liquid cations in environmental water samples by using strong cation exchange solid phase extraction and ion chromatography

This paper presents a novel analytical method for the determination of pyridinium ionic liquid cations in environmental water samples by ion chromatography coupled with solid phase extraction. The water samples were purified and enriched by a sulphonic acid extraction column, and then the impurities were washed with 10 mL water – 20% (v/v) acetonitrile solution and the analytes eluted with 0.5 mol L^?1 phosphoric acid – sodium dihydrogen phosphate buffer solution – 55% methanol. The eluted analytes were determined by ion chromatography with 3.0 mmol L^?1 methane sulphonic acid – 8% acetonitrile as the mobile phase and direct conductivity detection. Three pyridinium cations were completely separated in 20 min and the retention mechanism basically conforms to the ion exchange mode. The newly developed method has been successfully applied to the analysis of pyridinium cations in spiked environmental water samples, which provided satisfactory recoveries in the range of 98.8% to 100.0% with the relative standard deviations less than 2.8%. The concentration of 0.004 to 0.01 mg L^?1 in water samples can be preconcentrated by this method. The method is accurate, reliable, simple and practical. This research provides a new reference for detecting ionic liquid cations in environmental water samples and studying the environmental risk assessment of ionic liquids.     

Removal of ammonium ion from aqueous solutions using natural zeolite: kinetic,equilibrium and thermodynamic studies

The aim of the present study is to investigate the removal of ammonium ions from aqueous solutions using the natural Western Azerbaijan zeolite by utilizing ion exchange process. Batch experimental studies were conducted to evaluate by changing relevant parameters such as pH, dosage of adsorbent, stirring time, initial ammonium concentration, and temperature. The results clearly confirmed that all mentioned parameters have vital affects on removing ammonium ions from wastewater and effluents, so got optimized. Adsorption kinetics and equilibrium data for the removal of ammonium ion were analyzed using Langmuir and Freundlich equations. The Langmuir model fits the equilibrium data better than the Freundlich model. According to the Langmuir equation, the maximum uptake for ammonium ion was 43.47 (mg g^?1). Pseudo-first-order and pseudo-second-order models were used to represent the kinetics of the process. Kinetic studies showed that the adsorption followed a pseudo-second-order reaction. The calculated thermodynamic parameters (ΔG°, ΔH°, and ΔS°) indicate that the adsorption process is feasible, spontaneous, and endothermic at 20–50 °C. Based on the experimental results, it can be suggested that the natural Western Azerbaijan zeolite has the potential of application as an efficient adsorbent for the removal of ammonium ions from aqueous solutions, and is suggested for wastewater treatment purposes.     

Solid phase extraction of Pb(II) in water samples using a new hybrid inorganic-organic mesoporous silica prior to its determination by FAAS

A mesoporous silica has been chemically modified with 5-mercapto-1-methyltetrazole. The newly synthesized material was characterized by powder X-ray diffraction, N₂ adsorption, FT-IR, ¹³C-NMR spectroscopy and elemental analysis, and used to preconcentrate Pb(II) from aqueous solutions. The effect of several variables on the adsorption capacity (i.e. stirring time, pH, interfering ions, presence of other heavy metals in the medium, etc.) has been studied using batch and column techniques. The adsorption capacity of the material followed the order: Pb(II) >> Cu(II) > Cd(II) >>Mn(II) > Ni(II) > Co(II). In column experiments a pre-concentration factor of 200 was obtained for Pb(II). Spiked tap water, mineral water and river water were used for the preconcentration and determination of Pb(II) by flame atomic absorption spectrometry, and a 101–103% recovery was obtained. The limit of detection and quantification values of the method were found to be 2.22·10^?6 mM and 8.20·10^?6 mM, respectively. The relative standard deviation for four preconcentration experiments was found to be ≤9% in all cases.     

Determination of iodide in seawater samples by ion chromatography with chemically-bonded poly(ethylene glycol) stationary phase

An ion chromatographic method for the rapid and direct determination of iodide in seawater is reported. Poly(ethylene glycol) (PEG) groups were chemically bonded onto silica gel or C30-bonded silica gel via diol groups. PEG-bonded C30 binary phases allowed determination of iodide in seawater samples without any interference. Effects of eluent composition on retention behavior of inorganic anions have been investigated. Both cation and anion of the eluent affected the retention of analyte anions. The retention time of anions increased with increasing eluent concentration. The detection limit for iodide obtained by injecting 0.2 microl of sample was 13 microg l(-1) (S/N=3) while the limit of quantitation was 43 microg l(-1) (S/N=10). The present method was successfully applied to the rapid and direct determination of iodide in seawater with long-term durability.     

Estimation of platinum in environmental water samples with solid phase extraction technique using inductively coupled plasma mass spectrometry

A solid phase extraction technique for the determination of platinum(IV) at trace levels by inductively coupled plasma mass spectromA solid phase extraction technique for the determination of platinum(IV) at trace levels by inductively coupled plasma mass spectrometry (ICP-MS) was developed. The method was based on retention of platinum in a sample on silica gel modified with aminepropyl groups. The retention of platinum(IV) from the sample solution and the recovery of platinum with 1.0 mol L⁻¹ thiourea solution were quantitative. The relative standard deviation (RSD) was calculated as 5% (n = 7) at the 10 ng L⁻¹ level. The enrichment factor was found to be (50-fold) for 250 mL of water sample. Under optimum conditions, the method detection limit (MDL) was found to be 1 ng L⁻¹ for platinum in water matrices. Recoveries of Pt from spike addition to atmospheric water samples were quantitative (80–95%). The present method was used for the determination of platinum in precipitation, throughfall and runoff water samples.      

A new tool for inorganic nitrogen speciation study: simultaneous determination of ammonium ion, nitrite and nitrate by ion chromatography with post-column ammonium derivatization by Nessler reagent and diode-array detection in rain water samples

The paper presents a new method for a simultaneous determination of inorganic nitrogen species in the oxidized (NO₂⁻, NO₃⁻) and reduced (NH₄⁺) form in rain water samples. The method is based on a system of nitrogen species separation employing ion exchange and diode-array detection. The ions are separated in a strong ion-exchanger, nitrites and nitrates are determined directly at 208 and 205 nm, respectively, while the ammonium ions are determined in the column hold-up time after a post-column derivatization by the Nessler reagent, at 425 nm. The use of a diode-array detector permits a simultaneous identification of the inorganic nitrogen species in 8 min. The detection limits obtained are: NO₂⁻, 0.1 mg L⁻¹; NO₃⁻, 0.05 mg L⁻¹; NH₄⁺, 1 mg L⁻¹. The method proposed has been successfully used for speciation analysis of inorganic nitrogen in precipitation.     

Determination of inorganic arsenic(III) and arsenic(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry

A method was validated for the direct determination of As(III) and As(V) in water samples by ion chromatography/inductively coupled plasma-mass spectrometry. Sample preservation required only dilution with a mobile phase containing a sufficient amount of ethylenediaminetetraacetic acid and acetic acid. Analyses of 6 certified reference materials (CRMs) of various water matrixes, including seawater, demonstrated good method accuracy. The matrixes included 2 natural water samples [National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1643e and NIST SRM 1640], 1 fortified standard solution (TMDA-64), 1 fortified water sample (TM-DWS), and 2 seawater samples (CASS-4 and NASS-5). The sum of As(III) and As(V) in each CRM agreed with the respective certified value for the total amount of As within its stated uncertainty. Quantitative recoveries (96.7-102.1%) were obtained. Satisfactory results were achieved for intraday repeatability [relative standard deviation (RSD = 0.3-5.1%] and interday precision (RSD = 0.7-4.1%). In the study of fortified blanks and fortified CRMs, quantitative recoveries of As(III) and As(V) (92.5-102.6%) were obtained. Interconversion of As(III) and As(V) was not observed under the conditions of sample preservation. International comparability of analytical results was demonstrated by the analysis of 2 interlaboratory proficiency test samples, NY7011 and NY8511, from the New York State Department of Health.     

Separation of uranium from iron in ground water samples using ion exchange resins

Uranium determination in environmental samples is faced with problems due to presence of iron and other major elements. Iron is also used many a times for pre-concentration of uranium and actinides. Separation of milligram quantity of Fe from microgram quantity of uranium becomes essential during the estimation step. A simple two step procedure has been standardized for separating uranium and iron using anion exchange in 0.025 M H₂SO₄. Quantitative recovery of uranium was obtained as well as good separation from iron. This method was applied for estimation of uranium in water samples.     

Metal ion analysis in contaminated water samples using anodic stripping voltammetry and a nanocrystalline diamond thin-film electrode

Boron-doped nanocrystalline diamond thin-film electrodes were employed for the detection and quantification of Ag (I), Cu (II), Pb (II), Cd (II), and Zn (II) in several contaminated water samples using anodic stripping voltammetric (ASV). Diamond is an alternate electrode that possesses many of the same attributes as Hg and, therefore, appears to be a viable material for this electroanalytical measurement. The nanocrystalline form has been found to perform slightly better than the more conventional microcrystalline form of diamond in this application. Differential pulse voltammetry (DPASV) was used to detect these metal ions in lake water, well water, tap water, wastewater treatment sludge, and soil. The electrochemical results were compared with data from inductively coupled plasma mass spectrometric (ICP-MS) and or atomic absorption spectrometric (AAS) measurements of the same samples. Diamond is shown to function well in this electroanalytical application, providing a wide linear dynamic range, a low limit of quantitation, excellent response precision, and good response accuracy. For the analysis of Pb (II), bare diamond provided a response nearly identical to that obtained with a Hg-coated glassy carbon electrode.     

Rapid analysis of pesticide residues in drinking water samples by dispersive solid‐phase extraction based on multiwalled carbon nanotubes and pulse glow discharge ion source ion mobility spectrometry

An analytical method based on dispersive solid‐phase extraction with a multiwalled carbon nanotubes sorbent coupled with positive pulse glow discharge ion mobility spectrometry was developed for analysis of 30 pesticide residues in drinking water samples. Reduced ion mobilities and the mass–mobility correlation of 30 pesticides were measured. The pesticides were divided into five groups to verify the separation capability of pulse glow discharge in mobility spectrometry. The extraction conditions such as desorption solvent, ionic strength, conditions of adsorption and desorption, the amounts of multiwalled carbon nanotubes, and solution pH were optimized. The enrichment factors of pesticides were 5.4‐ to 48.7‐fold (theoretical enrichment factor was 50‐fold). The detection limits of pesticides were 0.01～0.77 μg/kg. The linear range was 0.005–0.2 mg/L for pesticide standard solutions, with determination coefficients from 0.9616 to 0.9999. The method was applied for the analysis of practical and spiked drinking water samples. All results were confirmed by high‐performance liquid chromatography with tandem mass spectrometry. The proposed method was proven to be a commendably rapid screening qualitative and semiquantitative technique for the analysis of pesticide residues in drinking water samples on site.     

Determination of inorganic acids by ion chromatography with n-tetradecylphosphocholine (zwitterionic surfactant) as the stationary phase and pure water as the mobile phase

A new ion chromatographic (IC) system, in which n-tetradecylphosphocholine (TDPC, a phosphobetaine type of zwitterionic surfactant) was used as the stationary phase, pure water as the mobile phase, and conductivity as the method of detection, has been developed for the determination of inorganic acids. Five model acids, HCl, HNO₃, HClO₄, H₂SO₄, and H₃PO₄, were separated to baseline and eluted in the order H₃PO₄ > HCl > HNO₃ > H₂SO₄ > HClO₄. When peak areas were plotted against the concentrations of the acids in samples, linear calibration curves were obtained. Ultimate determination limits were approximately 1 mmol L^–1, but the discrimination of the method between solutions of different concentration was better than 10 μmol L^–1 for those model analytes. Salts of divalent cations could also be separated, but they were eluted faster than the acids. No separation was observed for the salts of monovalent cations. This newly proposed approach is applicable to the simultaneous determination of the inorganic acids (produced by reactions of NO_x, SO_x, and HCl with water) in aerosols.