The rotational spectra, potential function, Born-Oppenheimer breakdown, and magnetic shielding of SnSe and SnTe

The pure rotational spectra of 27 isotopic species of SnSe and SnTe have been measured in the frequency range of 5-24 GHz using a Fabry-Perot-type resonator pulsed-jet Fourier-transform microwave spectrometer. Gaseous samples of both chalcogenides were prepared by laser ablation of suitable target rods and were stabilized in supersonic jets of Ar. Global multi-isotopolog analyses of all available high-resolution data produced spectroscopic Dunham parameters Y01, Y11, Y21, Y31, Y02, and Y12 for both species, as well as Born-Oppenheimer breakdown (BOB) coefficients delta01 for Sn, Se, and Te. A direct fit of the same data sets to an appropriate radial Hamiltonian yielded analytic potential energy functions and BOB radial functions for the X 1Sigma+ electronic state of both SnSe and SnTe. Additionally, the magnetic hyperfine interaction produced by the dipolar nuclei 119Sn, 117Sn, 77Se, and 125Te was observed, yielding first determinations of the corresponding spin-rotation coupling constants.     

The rotational spectra, potential function, Born-Oppenheimer breakdown, and hyperfine structure of GeSe and GeTe

The pure rotational spectra of 18 and 21 isotopic species of GeSe and GeTe have been measured in the frequency range 5-24 GHz using a Fabry-Pe?rot-type resonator pulsed-jet Fourier-transform microwave spectrometer. Gaseous samples of both chalcogenides were prepared by a combined dc discharge/laser ablation technique and stabilized in supersonic jets of Ne. Global multi-isotopologue analyses of the derived rotational data, together with literature high-resolution infrared data, produced very precise Dunham parameters, as well as rotational constant Born-Oppenheimer breakdown (BOB) coefficients (δ(01)) for Ge, Se, and Te. A direct fit of the same datasets to an appropriate radial Hamiltonian yielded analytic potential-energy functions and BOB radial functions for the X(1)Σ(+) electronic state of both GeSe and GeTe. Additionally, the electric quadrupole and magnetic hyperfine interactions produced by the nuclei (73)Ge, (77)Se, and (125)Te were observed, yielding much improved quadrupole coupling constants and first determinations of the spin-rotation parameters.     

Internuclear distance and effects of Born-Oppenheimer breakdown for PtS, determined from its pure rotational spectrum

Platinum monosulfide PtS has been prepared in its X0(+) ground electronic state by laser ablation of Pt in the presence of H(2)S. The rotational spectra of eight isotopic species have been measured with a cavity pulsed jet Fourier-transform microwave spectrometer. Spectral analysis using a multi-isotopomer Dunham-type expression produced values for Y(01), Y(02), Y(11), and Y(21), along with large values for Born-Oppenheimer breakdown (BOB) parameters for both atoms of the molecule. The BOB parameters are rationalized in terms of the molecular electronic structure and nuclear field shift effects. A large negative (195)Pt nuclear spin-rotation constant has been rationalized in terms of the electron-nucleus dipole-dipole hyperfine constant. The equilibrium bond length in the Born-Oppenheimer approximation has been evaluated.     

The influence of nuclear volume and electronic structure on the rotational energy of platinum monoxide, PtO

The pure rotational spectra of seven isotopic species of platinum monoxide have been measured with a cavity pulsed jet Fourier-transform microwave spectrometer. The molecules were prepared by laser ablation of Pt foil in the presence of O2 and stabilized in a supersonic jet of argon. A multi-isotopomer Dunham-type analysis of the spectra produced values for Y01 and Y11, along with unusually large values for Born-Oppenheimer breakdown (BOB) parameters for both Pt and O atoms. The values of the BOB parameters have been rationalized in terms of the molecular electronic structure and finite nuclear size (field shift) effects. A large negative 195Pt effective nuclear spin-rotation constant has been rationalized in terms of the electron-nucleus dipole-dipole hyperfine constant. Precise internuclear separations have been evaluated.     

Heavy doping and band engineering by potassium to improve the thermoelectric figure of merit in p-type PbTe, PbSe, and PbTe(1-y)Se(y)

We present detailed studies of potassium doping in PbTe(1-y)Se(y) (y = 0, 0.15, 0.25, 0.75, 0.85, 0.95, and 1). It was found that Se increases the doping concentration of K in PbTe as a result of the balance of electronegativity and also lowers the lattice thermal conductivity because of the increased number of point defects. Tuning the composition and carrier concentration to increase the density of states around the Fermi level results in higher Seebeck coefficients for the two valence bands of PbTe(1-y)Se(y). Peak thermoelectric figure of merit (ZT) values of ~1.6 and ~1.7 were obtained for Te-rich K(0.02)Pb(0.98)Te(0.75)Se(0.25) at 773 K and Se-rich K(0.02)Pb(0.98)Te(0.15)Se(0.85) at 873 K, respectively. However, the average ZT was higher in Te-rich compositions than in Se-rich compositions, with the best found in K(0.02)Pb(0.98)Te(0.75)Se(0.25). Such a result is due to the improved electron transport afforded by heavy K doping with the assistance of Se.     

Nanostructures versus solid solutions: low lattice thermal conductivity and enhanced thermoelectric figure of merit in Pb9.6Sb0.2Te10-xSex bulk materials

The series of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compounds with different Se content (x) were prepared, and their structure was investigated at the atomic and nanosized regime level. Thermoelectric properties were measured in the temperature range from 300 to 700 K. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) series was designed after the refinement of the single-crystal structure of Pb(3.82)Sb(0.12)Te(4) (Pb(9.6)Sb(0.3)Te(10); S.G. Pmm) by substituting isoelectronically in anion positions Te by Se. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x)() compounds show significantly lower lattice thermal conductivity (kappa(L)) compared to the well-known PbTe(1)(-)(x)Se(x) solid solutions. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a kappa(L) value as low as 0.40 W/m.K was determined at 700 K. High-resolution transmission electron microscopy of several Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) samples showed widely distributed Sb-rich nanocrystals in the samples which is the key feature for the strong reduction of the lattice thermal conductivity. The reduction of kappa(L) results in a significantly enhanced thermoelectric figure of merit of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compared to the corresponding PbTe(1)(-)(x)Se(x) solid solution alloys. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a maximum figure of merit of ZT approximately 1.2 was obtained at approximately 650 K. This value is about 50% higher than that of the state-of-the-art n-type PbTe. The work provides experimental validation of the theoretical concept that embedded nanocrystals can promote strong scattering of acoustic phonons.     

Ab initio configuration interaction study of the low-lying 1Sigma+ electronic states of LiCl

Ab initio configuration interaction calculations have been performed for the X 1Sigma+ and B 1Sigma+ electronic states of LiCl. Potential energy curves, dipole moment functions, and dipole transition moments have been computed for internuclear distances between R = 2.5a0 and 50a0. Single- and double-excitation configuration interaction wave functions were constructed using molecular orbitals obtained from a two-state averaged multiconfiguration self-consistent-field calculation. This procedure yielded an accurate energy splitting between the covalent and ionic separated-atom limits. The calculated avoided crossing of the X and B state curves occurs at R = 16.2a0, in close agreement with previous calculations using a semiempirical covalent-ionic resonance model. X 1Sigma+ state spectroscopic constants are in excellent agreement with experimental values.     

Te/Cr共掺提高PbSe的热电性能

采用高温固相法和快速热压工艺在PbSe的Pb位掺入Cr以调节载流子有效质量、在Se位掺入Te以调节载流子浓度,协同优化载流子迁移率以提高基体材料的热电优值ZT。最终获得的Pb0.97Cr0.03Se0.94Te0.06热电材料在673 K时ZT为0.44,是未掺杂样品PbSe的4.89倍。     

Ground state potential energy curve and dissociation energy of MgH

New high-resolution visible emission spectra of the MgH molecule have been recorded with high signal-to-noise ratios using a Fourier transform spectrometer. Many bands of the A 2Pi-->X 2Sigma+ and B' 2Sigma+-->X 2Sigma+ electronic transitions of 24MgH were analyzed; the new data span the v' = 0-3 levels of the A 2Pi and B'2Sigma+ excited states and the v'=0-11 levels of the X 2Sigma+ ground electronic state. The vibration-rotation energy levels of the perturbed A 2Pi and B' 2Sigma+ states were fitted as individual term values, while those of the X 2Sigma+ ground state were fitted using the direct-potential-fit approach. A new analytic potential energy function that imposes the theoretically correct attractive potential at long-range, and a radial Hamiltonian that includes the spin-rotation interaction were employed, and a significantly improved value for the ground state dissociation energy of MgH was obtained. The v'=11 level of the X 2Sigma+ ground electronic state was found to be the highest bound vibrational level of 24MgH, lying only about 13 cm(-1) below the dissociation asymptote. The equilibrium dissociation energy for the X 2Sigma+ ground state of 24MgH has been determined to be De=11104.7+/-0.5 cm(-1) (1.37681+/-0.00006 eV), whereas the zero-point energy (v'=0) is 739.11+/-0.01 cm(-1). The zero-point dissociation energy is therefore D0=10365.6+/-0.5 cm(-1) (1.28517+/-0.00006 eV). The uncertainty in the new experimental dissociation energy of MgH is more than 2 orders of magnitude smaller than that for the best value available in the literature. MgH is now the only hydride molecule other than H2 itself for which all bound vibrational levels of the ground electronic state are observed experimentally and for which the dissociation energy is determined with subwavenumber accuracy.     

PbTe colloidal nanocrystals: synthesis, characterization, and multiple exciton generation

We report an alternative synthesis and the first optical characterization of colloidal PbTe nanocrystals (NCs). We have synthesized spherical PbTe NCs having a size distribution as low as 7%, ranging in diameter from 2.6 to 8.3 nm, with first exciton transitions tuned from 1009 to 2054 nm. The syntheses of colloidal cubic-like PbSe and PbTe NCs using a PbO "one-pot" approach are also reported. The photoluminescence quantum yield of PbTe spherical NCs was measured to be as high as 52 +/- 2%. We also report the first known observation of efficient multiple exciton generation (MEG) from single photons absorbed in PbTe NCs. Finally, we report calculated longitudinal and transverse Bohr radii for PbS, PbSe, and PbTe NCs to account for electronic band anisotropy. This is followed by a comparison of the differences in the electronic band structure and optical properties of these lead salts.     

窄带隙IV-VI族半导体PbTe(111)的表面氧化及氧的热脱附机理

利用X射线光电子能谱(XPS)、扫描隧道显微镜(STM)以及低能电子衍射(LEED),对PbTe(111)薄膜的表面氧化及氧的热脱附机理进行了研究.结果表明:PbTe(111)薄膜经500VAr+轰击加上250℃高温退火循环处理,可得到呈(1×1)周期性排列的清洁表面.将此清洁表面暴露于大气两天后,表面被氧化形成了PbO2、PbO和TeO2,氧化层的厚度大于2个单原子层(ML),与清洁PbTe(111)表面相比,被氧化的PbTe(111)表面的Te3d5/2与Pb4f7/2芯态谱峰的面积比明显减小,表明被氧化的PbTe(111)表面是富Pb的.在热脱附处理过程中,PbO2和TeO2的芯态峰消失,且O1s芯态峰的强度迅速减弱,表明加热处理不仅使PbO2和TeO2发生了分解,同时也使氧发生了脱附,但PbO即使在350℃退火仍吸附于PbTe(111)表面.     

Preliminary studies in the electrodeposition of PbSe/PbTe superlattice thin films via electrochemical atomic layer deposition (ALD)

This paper concerns the electrochemical growth of compound semiconductor thin film superlattice structures using electrochemical atomic layer deposition (ALD). Electrochemical ALD is the electrochemical analogue of atomic layer epitaxy (ALE) and ALD, methods based on nanofilm formation an atomic layer at a time, using surface-limited reactions. Underpotential deposition (UPD) is a type of electrochemical surfaced-limited reaction used in the present studies for the formation of PbSe/PbTe superlattices via electrochemical ALD. PbSe/PbTe thin-film superlattices with modulation wavelengths (periods) of 4.2 and 7.0 nm are reported here. These films were characterized using electron probe microanalysis, X- ray diffraction, atomic force microscopy (AFM), and infrared reflection absorption measurements. The 4.2 nm period superlattice was grown after deposition of 10 PbSe cycles, as a prelayer, resulting in an overall composition of PbSe0.52Te0.48. The 7.0 nm period superlattice was grown after deposition of 100 PbTe cycle prelayer, resulting for an overall composition of PbSe0.44Te0.56. The primary Bragg diffraction peak position, 2theta, for the 4.2 superlattice was consistent with the average (111) angles for PbSe and PbTe. First-order satellite peaks, as well as a second, were observed, indicating a high-quality superlattice film. For the 7.0 nm superlattice, Bragg peaks for both the (200) and (111) planes of the PbSe/PbTe superlattice were observed, with satellite peaks shifted 1 degrees closer to the (111), consistent with the larger period of the superlattice. AFM suggested conformal superlattice growth on the Au on glass substrate. Band gaps for the 4.2 and 7.0 nm period superlattices were measured as 0.48 and 0.38 eV, respectively.     

ChemInform Abstract: X2Y2 Isomers: Tuning Structure and Relative Stability Through Electronegativity Differences (X: H,Li, Na,F, Cl,Br, I; Y: O,S, Se,Te).

Density functional calculations on XYYX and X₂YY isomers of the X₂Y₂ species (X: H, Li, Na, F, Cl, Br, I; Y: O, S, Se, Te) show that the XYYX isomers are more stable than the X₂YY forms except for X = F and Y = S and Te, for which the F₂SS and F₂TeTe isomers are slightly more stable.     

Resonance‐Assisted Intramolecular Chalcogen–Chalcogen Interactions?

High-level B3LYP/6-311+G(3df,2p) density functional calculations have been carried out for a series of saturated chalcogenoaldehydes: CH(X)-CH(2)-CH(2)YH (X, Y=O, S, Se, Te). Our results indicate that in CH(X)-CH(2)-CH(2)YH (X=Y=O, S, Se) the X-H...X intramolecular hydrogen bond (IHB) competes in strength with the X...XH chalcogen-chalcogen interaction, while the opposite is found for the corresponding tellurium-containing analogues. For those derivatives in which X does not equal Y, X being the more electronegative atom, the situation is more complicated due to the existence of two non-equivalent X-H and Y-H tautomers. The Y-H tautomer is found to be lower in energy than the X-H tautomer, independently of the nature of X and Y. For X=O, S, Se and Y=S, Se the most stable conformer b is the one exhibiting a Y-H...X IHB. Conversely when Y=Te, the chelated conformer d, stabilized through a X...YH chalcogen-chalcogen interaction is the global minimum of the potential energy surface. Systematically the IHB and the chalcogen-chalcogen interactions observed for saturated compounds are much weaker than those found for their unsaturated analogues. This result implies that the nonbonding interactions involving chalcogen atoms, mainly Se and Te, are not always strongly stabilizing. This conclusion is in agreement with the fact that intermolecular interactions between Se and Te containing systems with bases bearing dative groups are very weak. We have also shown that these interactions are enhanced for unsaturated compounds, through an increase of the charge delocalization within the system, in a mechanism rather similar to the so call Resonance Assisted Hydrogen Bonds (RAHB). The chalcogen-chalcogen interactions will be also large, due to the enhancement of the X-->Y dative bond, if the molecular environment forces the interacting atoms X and Y to be close each other.     

Density functional theory study of indirect nuclear spin-spin coupling constants with spin-orbit corrections

This work outlines the calculation of indirect nuclear spin-spin coupling constants with spin-orbit corrections using density functional response theory. The nonrelativistic indirect nuclear spin-spin couplings are evaluated using the linear response method, whereas the relativistic spin-orbit corrections are computed using quadratic response theory. The formalism is applied to the homologous systems H2X (X=O,S,Se,Te) and XH4 (X=C,Si,Ge,Sn,Pb) to calculate the indirect nuclear spin-spin coupling constants between the protons. The results confirm that spin-orbit corrections are important for compounds of the H2X series, for which the electronic structure allows for an efficient coupling between the nuclei mediated by the spin-orbit interaction, whereas in the case of the XH4 series the opposite situation is encountered and the spin-orbit corrections are negligible for all compounds of this series. In addition we analyze the performance of the density functional theory in the calculations of nonrelativistic indirect nuclear spin-spin coupling constants.     

Theoretical spectroscopy of the calcium dimer in the A 1Sigma(u)+, c3Pi(u), and a3Sigma(u)+ manifolds: an ab initio nonadiabatic treatment

Nonadiabatic theory of molecular spectra of diatomic molecules is presented. It is shown that in the fully nonadiabatic framework, the rovibrational wave functions describing the nuclear motions in diatomic molecules can be obtained from a system of coupled differential equations. The rovibrational wave functions corresponding to various electronic states are coupled through the relativistic spin-orbit coupling interaction and through different radial and angular coupling terms, while the transition intensities can be written in terms of the ground state rovibrational wave function and bound rovibrational wave functions of all excited electronic states that are electric dipole connected with the ground state. This theory was applied in the nearly exact nonadiabatic calculations of energy levels, line positions, and intensities of the calcium dimer in the A (1)Sigma(u) (+)(1 (1)S+1 (1)D), c (3)Pi(u)(1 (3)P+1 (1)S), and a (3)Sigma(u) (+)(1 (3)P+1 (1)S) manifolds of states. The excited state potentials were computed using a combination of the linear response theory within the coupled-cluster singles and doubles framework for the core-core and core-valence electronic correlations and of the full configuration interaction for the valence-valence correlation, and corrected for the one-electron relativistic terms resulting from the first-order many-electron Breit theory. The electric transition dipole moment governing the A (1)Sigma(u) (+)<--X (1)Sigma(g) (+) transitions was obtained as the first residue of the frequency-dependent polarization propagator computed with the coupled-cluster method restricted to single and double excitations, while the spin-orbit and nonadiabatic coupling matrix elements were computed with the multireference configuration interaction wave functions restricted to single and double excitations. Our theoretical results explain semiquantitatively all the features of the observed Ca(2) spectrum in the A (1)Sigma(u) (+)(1 (1)S+1 (1)D), c (3)Pi(u)(1 (3)P+1 (1)S), and a (3)Sigma(u) (+)(1 (3)P+1 (1)S) manifolds of states.     

Electrochemical Formation of Amorphous Selenium Films Doped by Lead Selenide Nanoparticles

The formation of amorphous Se films doped by PbSe nanoparticles during the cathodic co-deposition of Se and Pb is studied. Doping Se with PbSe makes the charge transfer more efficient both in the film bulk and at the heterojunction with electrolyte, thus making it possible to deposit Se(PbSe) films a few micrometers thick. Co-deposition of Se and Pb results from electrodeposition of adsorbed Pb atoms on surface atoms of Se at potentials more positive than the equilibrium potential of the Pb reduction (underpotential deposition). For the Se(PbSe) electrodes, spectral sensitization of photocurrent is observed up to 900 nm. As opposed to Se, which is characterized by absorption at < 600 nm, the edge of optical absorption of Se(PbSe) is displaced towards the long-wave region of the spectrum. The underpotential deposition on the Se(PbSe) surface is possible in dark, permitting their additional modification by PbSe monolayers.     

Solubility and microstructure in the pseudo-binary PbTe-Ag2Te system

The solvus lines of the PbTe and Ag₂Te phases in the pseudo-binary PbTe-Ag₂Te system have been determined using diffusion couples and unidirectional solidification by the Bridgman method. The solubilities of both Ag₂Te in PbTe and PbTe in Ag₂Te decrease with decrease in temperature. For the former, this change is from 14.9 at% Ag (694 °C) to 0.5 at% Ag (375 °C), while for the latter it is from 12.4 at% Pb (650 °C) to 3.1 at% Pb (375 °C). The decrease in solubilities leads to the formation of precipitates of Ag₂Te in PbTe and PbTe in Ag₂Te. In particular, fast atomic diffusion in Ag₂Te results in the precipitation of PbTe even in quenched samples. From the temperature dependence of these solubilities, heats of solution have been determined. In the diffusion couple, the phase boundary moves toward PbTe. In the region between the phase boundary and the initial interface, PbTe transforms to β-Ag₂Te (cubic) retaining the cube-on-cube orientation relationship.     

The B 1sigma+ and X 1sigma+ electronic states of hydrogen fluoride: a direct potential fit analysis

All literature pure rotational and vibration-rotational spectroscopic data on the ground X (1)Sigma(+) electronic state of HF and DF, together with the entire set of spectroscopic line positions from analyses of the B (1)Sigma(+) --> X (1)Sigma(+) emission band systems of HF and DF, have been used in a global least-squares fit to the radial Hamiltonian operators, in compact analytic form, for both electronic states. With a data set consisting of 6157 spectroscopic line positions, the reduced standard deviation of the fit was sigma = 1.028. Sets of quantum mechanically significant rotational and centrifugal distortion constants were calculated for both electronic states using Rayleigh-Schr?dinger perturbation theory.