Structural properties of host laser single crystal Yb:YAG

High quality Yb_xY_1 − xAG (0 ≤ × ≤ 1) single crystals were grown by using the Czochralski method. The structural properties of Yb_xY_1 − xAG (0 ≤ x ≤ 1) single crystals were also investigated using the EXAFS method. Additionally, for the first time, EXAFS results were compared with XRD results. Moreover, without essential lattice structure transformation, Yb_xY_1 − xAG crystals can be found due to the varying of doping concentration in XRD measurements. However, EXAFS measurements indicated that the local fine structural variation around the Yb³⁺ ion depends on the Yb³⁺ concentration.     

Atom geometry of nanostructured Fe films grown on c(2 × 2)-N/Cu(1 0 0) surface: An investigation by X-ray absorption spectroscopy with multishell analysis

We investigated the growth of Fe nanostructured films on c(2 × 2)-N/Cu(1 0 0) surface with Fe K-edge X-ray absorption fine structure (XAFS) in the near edge and in the extended energy region. The high photon flux of the incident X-rays allowed us to perform multishell analysis of the XAFS oscillations for Fe coverage Θ_Fe < 1 ML. This data analysis yields a detailed investigation of the atom geometry and some insights in the film morphology. At Θ_N < 0.5 ML (N saturation coverage) there is absence of contribution to XAFS from N atoms. First shell analysis of linearly polarized XAFS gives Fe-Fe (or Fe-Cu) bond length values varying between R₁ = 2.526 ± 0.006 Å at the highest Fe coverage (3 ML ) and R₁ = 2.58 ± 0.01 Å at Θ_Fe = 0.5 ML, Θ_N = 0.3 ML, with incidence angle Θ = 35°. These values are different from the case of bcc Fe (R = 2.48 Å), and compatible with fcc Fe (R₁ = 2.52 Å) and fcc Cu (R₁ = 2.55 Å). At the Fe lowest coverage (Θ_Fe = 0.5 ML) the dependence of R₁ on the incidence angle indicates expansion of the outmost layer. Near edge spectra and multishell analysis can be well reproduced by fcc geometry with high degree of static disorder. At N saturation pre-coverage (Θ_N = 0.5 ML) the XAFS analysis has to keep into account the Fe-N bonding. The results suggest two different adsorption sites: one with Fe in a fcc hollow site, surrounded by other metal atoms as nearest neighbours, and one resulting from an exchange with a Cu atom underneath the N layer.     

Study of the local micro-structure and magnetic and transport properties of CrxGe1−x thin films

The local micro-structure as well as the magnetic and transport properties of Cr_xGe_1−x films prepared by means of magnetron sputtering have been investigated. Structural analysis shows that Cr atoms are situated in substitutional sites in the Ge lattice. Electrical transport properties indicate that Cr introduces a shallow acceptor level at 0.016 eV from the valence band implying Cr substituting for Ge. The low temperature ferromagnetism observed in the films is mediated mainly by ferromagnetic superexchange interactions between diluted Cr ions.     

Soft X-ray microscopy and spectroscopy at the molecular environmental science beamline at the Advanced Light Source

We present examples of the application of synchrotron-based spectroscopies and microscopies to environmentally relevant samples. The experiments were performed at the molecular environmental science beamline (11.0.2) at the Advanced Light Source, Lawrence Berkeley National Laboratory. Examples range from the study of water monolayers on Pt(1 1 1) single crystal surfaces using X-ray emission spectroscopy and the examination of alkali halide solution/water vapor interfaces using ambient pressure photoemission spectroscopy, to the investigation of actinides, river water biofilms, Al-containing colloids and mineral–bacteria suspensions using scanning transmission X-ray spectromicroscopy. The results of our experiments show that spectroscopy and microscopy in the soft X-ray energy range are excellent tools for the investigation of environmentally relevant samples under realistic conditions, i.e., with water or water vapor present at ambient temperature.     

Co掺杂ZnO薄膜的局域结构和电荷转移特性研究

采用磁束缚电感耦合等离子体溅射沉积法在不同的氧气分压下制备了Zn_0.95Co_0.05O和Zn_0.94Co_0.05Al_0.01O薄膜.利用X射线吸收精细结构技术对薄膜O-K,Co-K和Co-L边进行了局域结构研究,结果表明：Co²⁺取代了四配位晶体场中的Zn²⁺而未改变ZnO的六方纤锌矿结构,高真空条件下制备的薄膜 关键词： Co掺杂ZnO 稀磁半导体 X射线吸收精细结构 共振非弹性X射线散射     

The structure of a metallic glass system using EXELFS and EXAFS as complementary probes

The short-range atomic order around all three constituent atoms in a prototypical bulk metallic glass (BMG) system was probed in a complementary way, using extended X-ray absorption fine structure for neighborhood of the higher atomic number elements, and extended energy loss fine structure (EXELFS) for the lower atomic number ones. The Pd_xNi_(80−x)P₍₂₀₎ system is a prototype for a whole class of BMG formers which are 80% transition metal and 20% metalloid. We find that the structure of these BMGs could be explained in terms of those of glasses at the end of the BMG range, namely, Pd₆₀Ni₂₀P₂₀ and Pd₃₀Ni₅₀P₂₀. The binary phosphide crystals near x=0 and 80 are found to be simulate very well the local atomic structure of Pd₃₀Ni₅₀P₂₀ and Pd₆₀Ni₂₀P₂₀ glasses, respectively. The best glass former in this series, Pd₄₀Ni₄₀P₂₀, is best described by a weighted average of Pd₃₀Ni₅₀P₂₀ and Pd₆₀Ni₂₀P₂₀ structures.     

Spectroscopic investigation of neutral and reduced forms of Fe-monoazaporphyrins

The results of an investigation into neutral Fe-monoazaetioporphyrin (FeMAEP) and its reduced forms carried out using the methods of absorption spectroscopy, EPR, and Mössbauer spectroscopy are presented. It is shown that at room and liquid nitrogen temperatures in an initial complex a spin state of Fe(III) is implemented, which is the result of a quantum-mechanical mixing of two spin states (S=5/2, S=3/2). The absorption spectra of the reduced forms [(FeMAEP)^n?, n=1, 2, 3] are similar to those of anions of other Fe-porphyrins; in the EPR spectra of Fe(I)MAEP lines of a hyperfine structure are observed that are sensitive to a solvent.     

基于XPS与XAS的稀磁半导体GaMnN电子结构研究

采用基于同步辐射技术的X射线光电子能谱(XPS)与X射线吸收谱(XAS)测试由金属有机化学气相沉积(MOCVD)技术制备的不同Mn掺杂浓度的稀磁半导体GaMnN薄膜的电子结构,探究Mn掺杂浓度对磁性原子Mn周围的局域环境和电子态等方面的影响,并阐述材料铁磁性变化的机理. XPS和XAS图谱分析表明：Mn²⁺和Mn³⁺共存于薄膜样品内,样品D中Mn²⁺占比高达70%-80%,N空位随Mn掺杂浓度增加而增多且N空位能够使空穴浓度降低,导致Mn 3d和N 2p轨道间的相互交换作用减小,从而减弱体系铁磁性.此外,Mn不同的掺杂浓度会影响GaMnN薄膜p-d耦合杂化能力的强弱,当掺Mn 1.8%时具有较强的p-d耦合杂化能力.     

Adsorption and reaction of methanol on thin-film cerium oxide

Methanol adsorption and reaction has been studied on cerium oxide thin films that were vapor deposited on Ru(0 0 0 1). The methanol behavior was examined as a function of temperature and Ce oxidation state. Methanol reacts at low temperatures with fully oxidized CeO₂ to produce water at 200 K while formaldehyde and methanol desorb near 560 K. This leads to the reduction of the ceria. On reduced ceria, more methanol can be adsorbed and it undergoes more extensive decomposition producing CO and H₂ near 640 K in addition to formaldehyde and water. As the degree of ceria reduction increases, more H₂ and less H₂O are produced. TPD experiments using isotopically labeled CH₃OD show that deuterated water is produced from the oxidized surface at low temperatures, whereas the deuterium is stabilized on the reduced surface and is incorporated into the dihydrogen that desorbs near 600 K. High resolution C 1s and O 1s XPS and C k-edge NEXAFS measurements were performed to quantify the amount of methanol adsorbed and to identify the adsorbed species.     

XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces

The chemical constitution of functionalized supports is an important parameter that determines their performance in a broad range of applications, e.g. for immobilization of biomolecules. Supports with amino functionalized surfaces are also often used for DNA microarray experiments. However, spectral data which have been reported for surfaces with amino functionalities suffer from some inconsistencies. In this article a detailed XPS (X-ray photoelectron spectroscopy) and NEXAFS (Near edge X-ray absorption fine structure) database for amino functionalized surfaces is presented. Amino-terminated surfaces prepared from aliphatic and aromatic aminosilanes or aminothiols and a field sample are considered. Effects of aging in air and damage by radiation are addressed as well.     

Adsorption and reaction of formaldehyde on thin-film cerium oxide

Formaldehyde adsorption and reaction have been studied on cerium oxide thin films that were vapor deposited on Ru(0 0 0 1). The formaldehyde behavior was examined as a function of temperature, exposure and Ce oxidation state. Formaldehyde chemisorbs on fully oxidized CeO₂ as dioxymethylene, CH₂O₂. The dioxymethylene decomposes and desorbs as formaldehyde between 200 K and 400 K. No other products are formed. On reduced ceria, formaldehyde also adsorbs as dioxymethylene. In addition to the formaldehyde desorption between 200 K and 400 K, a more strongly bound form of dioxymethylene is formed that produces formaldehyde at 440 K. Above 400 K, some of the dioxymethylene reacts to form formate and methoxy on the surface. These species decompose to produce H₂, CO and CH₂O above 500 K.     

Structure Studies of Platinothioneins by Using Extended X-Ray Absorption Fine Structure Spectroscopy

The metal binding sites in the two Pt containing metallothioneins (Pt₇MT and Pt₁₄MT) were examined by means of Pt(II) L₃-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. Comparisons between the phase and amplitude functions derived from the isolated shells to those of Pt…Pt, Pt-S and Pt-N model components showed that each platinum in Pt₇MT was coordinated by four sulfur atoms at a distance of 2.31±0.01 Å. Analysis of the outer shell data of platinum atom in Pt⁷MT indicated backscattering platinum atom at approximate 4.29 Å. Strikingly different structural parameters had been obtained for the Pt¹⁴MT species, fitting of the first shell revealed that each platinum was coordinated by two sulfurs at the distance of 2.30±0.02 Å and two nitrogens at 2.02±0.02 Å. The results of the work provided the detailed information concerning the local environments of the coordinated Pt(II) in these two platinothioneins.     

Adsorption and structure of methyl mercaptoacetate on Cu(1 1 1) surface by XPS and NEXAFS spectroscopy

Methyl mercaptoacetate (MA) on Cu(1 1 1) surface was investigated using synchrotron radiation-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. MA adsorbs on the surface via thiolate formation and weak interaction of the carbonyl group with the surface. Two different adsorption states previously reported for methanethiolate and ethanethiolate were confirmed, besides atomic sulfur. NEXAFS measurements support gauche-type conformation of MA whose skeleton lies on the surface.     

Molecular orientation of thiol-derivatized tetraphenylporphyrin on gold studied by XPS and NEXAFS

Tetraphenylporphyrins bearing four linkers consisting of thioacetyl-functionalized carbon chains were immobilized on a gold surface via thiolate-gold bonds using two different preparation routes. The structure of these molecular layers was characterized in detail with synchrotron radiation based core-level spectroscopy, X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The results show that the geometry of the molecular layers and the number of linkers that bind to the gold surface depends on the preparation schemes. The deprotection of the linkers through removal of the terminal acetyl group before the molecular adsorption (deprotected systems) resulted in porphyrins bound to the gold surface with on the average three linkers, their normal axis being tilted ∼38° with respect to the surface normal. On the other hand, porphyrin layers prepared directly with the acetyl group still in place on the linkers (protected systems) are made of molecules bound to the gold surface via two linkers on the average. The resulting orientation is more upright, with the normal axis of the porphyrin plane tilted ∼50° with respect to the surface normal. Moreover, NEXAFS measurements revealed that the acetyl deprotected porphyrin layers have a higher degree of ordering than the protected systems.     

Anchoring of alkyl chain molecules on oxide surface using silicon alkoxide

Chemical states of the interfaces between octadecyl-triethoxy-silane (ODTS) molecules and sapphire surface were measured by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) using synchrotron soft X-rays. The nearly self-assembled monolayer of ODTS was formed on the sapphire surface. For XPS and NEXAFS measurements, it was elucidated that the chemical bond between silicon alkoxide in ODTS and the surface was formed, and the alkane chain of ODTS locates upper side on the surface. As a result, it was elucidated that the silicon alkoxide is a good anchor for the immobilization of organic molecules on oxides.     

Conformational isomers of stilbene on Si(1 0 0)

Stilbene (1,2-diphenylethylene) has shown an intriguing isomerisation behavior and may serve as a model system for “molecular switches” incorporating a CC double bond. To evaluate the possible use of such molecules as molecular switches on semiconductor surfaces, the adsorption of cis- and trans-stilbene on Si(1 0 0) has been investigated. Identification of both isomers is achieved by differences in adsorption geometry as revealed by NEXAFS, and differences in electronic structure in the occupied and unoccupied molecular orbitals. For both isomers, bonding takes place via the CC double bond to the Si dimer atoms allowing for free movement of the aromatic rings, a necessary prerequisite for photoinduced isomerisation on the surface. Our experimental results agree well with theoretical calculations.     

X射线吸收谱测算锂氮共掺杂氧化锌薄膜局域电子结构

为了实现对Li—N共掺杂p型ZnO薄膜的形成机制以及其稳定p型导电原因的揭示,利用X射线光电子谱及基于同步辐射光源的X射线吸收精细结构谱测试对薄膜的局域电子结构进行了测算分析.获得了Li—N成键及Li—N复合型受主形成的信号,利用光致发光测量计算其受主能级为122 mV.证实了薄膜中Li—N复合型受主的形成,而Li—N...     

苝四甲酸二酐薄膜电子结构的同步辐射共振光电子能谱研究

利用基于同步辐射的近边X射线吸收精细结构谱(NEXAFS)和共振光电子谱(RPES)研究了苝四甲酸二酐分子(PTCDA)薄膜的电子结构.碳K边NEXAFS谱中能量小于290 eV的四个峰对应于PTCDA分子不同化学环境碳原子1s电子到未占据分子轨道的共振跃迁.RPES谱中观察到共振光电子发射和共振俄歇电子发射导致的共振峰结构,以及二次谐波激发的碳1s信号.根据电子动能对入射光能量的依赖性分别对三类峰结构进行了归属.同时,发现PTCDA分子轨道共振光电子峰的强度具有光子能量依赖性.这种能量选择性共振增强效应是由于PTCDA分子轨道空间分布差异导致的.共振俄歇峰主要源于高结合能(4.1 eV)分子轨道能级电子参与的退激发过程.明确RPES实验谱图中各个峰结构的起源有助于准确利用基于RPES的芯能级空穴时钟谱技术定量估算有机分子/电极异质界面处电子从分子未占据轨道到电极导带的超快转移时间.     

F8BT薄膜表面形貌及与Al形成界面的电子结构和反应

基于共轭聚合物光电器件的性能与聚合物的表面形貌、分子取向、以及与金属电极形成的界面结构密切相关. 本文利用原子力显微镜(AFM)、同步辐射光电子能谱(SRPES)和近边X射线吸收精细结构谱(NEXAFS)等, 研究了聚(9, 9-二辛基芴并苯噻二唑)(F8BT)薄膜的表面形貌、分子取向及其与Al 电极形成界面过程的结构变化. 结果表明, 在略低于F8BT玻璃转变温度(T_g=130 ℃)条件下对F8BT薄膜进行退火, 可明显增加薄膜的表面粗糙度, 薄膜中F8BT 的分子取向角约为49°, 9, 9-二辛基芴单元(F8)与苯噻唑单元(BT)几乎在同一平面. 在Al/F8BT 界面形成过程中, Al与F8BT中的C, N和S均发生不同程度的化学反应, 并导致价带结构和未占据分子轨道(LUMO)态密度的变化. Al对F8BT进行n型掺杂引起F8BT能带弯曲的同时, 未占据能级被部分占据, 更多的电子将被注入到LUMO+1中. 通过考察价带电子结构、芯能级位移及二次截止边的变化, 绘制了清晰的Al/F8BT界面能级图.