Studies on light emitting CdSe quantum dots in commercial polymethylmethacrylate

CdSe quantum dots (QDs) prepared using an aqueous sodium selenosulphite and N,N′-dimethylformamide (DMF) in commercial polymethylmethacrylate (PMMA) showed excellent optical properties. Tuning of the absorption and emission wavelengths by varying the selenium concentration with respect to cadmium is studied. As-prepared CdSe quantum dots showed absorption band at 405 nm (3.06 eV) associated with the formation of ‘early-stage’ CdSe nano-particles along with weak absorption at 480–90 nm due to continuous growth of the particles. The blue-green and yellow-green light emissions were observed from as-prepared solutions. Photoluminescence (PL) measurement showed band-edge emissions at around 430 nm for small clusters but a more stable emission at 544 nm for the 1:1 CdSe sample. X-ray diffraction (XRD) pattern of the CdSe/PMMA powder with Cd/Se ratio of 1:1 showed broad pattern for cubic CdSe. Transmission electron microscopy (TEM) showed cube like de-shaped spherical dots in the region of about 5 nm.     

Green synthesis of silver nanoparticle by <Emphasis Type="Italic">Penicillium purpurogenum</Emphasis> NPMF: the process and optimization

An eco-friendly microbial method for synthesis of silver colloid solution with antimicrobial activity is developed using a fungal strain of Penicillium purpurogenum NPMF. It is observed that increase in concentration of AgNO₃ increases the formation of silver nanoparticle. At 5 mM concentration highly populated polydispersed nanoparticles form. Furthermore, change in pH of the reaction mixture leads to change in shape and size of silver nanoparticles. At lower pH two peaks are observed in the absorption spectra showing polydispersity of nanoparticles. However, highly monodispersed spherical nanoparticles of 8–10 nm size form with 1 mM AgNO₃ concentration at pH 8. Antimicrobial activity of nanoparticles is demonstrated against pathogenic gram negative bacteria like Escherichia coli and Pseudomonas aeruginosa, and gram positive bacteria like Staphylococcus aureus. The antimicrobial activity of silver nanoparticles obtained at different initial pH show strong dependence on the surface area and shape of the nanoparticles.     

Methoxycarbonyl-terminated hyperbranched poly(amine-ester) as templates for synthesis of silver nanoparticles

Highly stable and spherical silver nanoparticles, stabilized by methoxycarbonyl-terminated hyperbranched poly(amine-ester) (HPAE-COOCH₃), were synthesized in water with reducing AgNO₃/HPAE-COOCH₃ using two methods, viz. NaBH₄ and ultraviolet irradiation. HPAE-COOCH₃ was found to play a key role in the formation of nanoparticles. UV–visible absorption, Transmission electron microscopic (TEM), and Fourier transform infrared spectroscopy (FT-IR) had been used to study the structure and characterization of the silver nanoparticles. The absorption peaks of the silver nanoparticles appear at ~420 nm in UV–visible absorption spectra; average particle size reduced by NaBH₄ is ~30 nm, which is ~10 and ~15 nm, respectively, when ultraviolet irradiation time is 12 and 24 h. FT-IR spectra confirm that there is strong interaction between silver nanoparticles and HPAE-COOCH₃. And silver nanoparticles/HPAE-COOCH₃ aqueous solution can keep stable for more than 3 months.     

Fusarium solani: a novel biological agent for the extracellular synthesis of silver nanoparticles

We report extracellular biosynthesis of silver nanoparticles by Fusarium solani (USM-3799), a phytopathogen causing disease in onion, when challenged with 1 mM silver nitrate (AgNO₃). The formation of nanoparticles was characterized by visual observation followed by UV–Vis spectrophotometric analysis, which showed a peak at about 420 nm, which is very specific for silver nanoparticles. Further analysis carried out by Fourier Transform Infrared Spectroscopy (FTIR), provides evidence for the presence of proteins as capping agent, which helps in increasing the stability of the synthesized silver nanoparticles. Transmission Electron Microscopy (TEM) investigations confirmed that silver nanoparticles were formed. The synthesized silver nanoparticles were found to be polydispersed, spherical in the range of 5–35 nm with average diameter of 16.23 nm. Extracellular synthesis of nanoparticles could be highly advantageous from the point of view of synthesis in large quantities and easy downstream processing.     

Nonlinear refraction of silver nanowires from nanosecond to femtosecond laser excitation

In order to investigate the effect of pulse width and solvent on the nonlinear properties of metal nanostructures, silver nanowires were fabricated in a direct current electric field (DCEF) using a solid-state ionic method and characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The nonlinear refractive index (γ) of silver nanowires suspended in ethanol was measured using the Z-scan technique and laser radiation of various (femto-, pico-, and nanosecond) pulse durations. Experimental results indicated that silver nanowires have obvious positive refractive nonlinearities and γ (the Kerr-induced self-focusing) increases as the pulse duration increases from 7.4×10⁻⁸ cm²/GW at 110 fs to 1.6×10⁻⁴ cm²/GW at 8 ns, due to the additional influence of the atomic reorientational Kerr effect in the case of longer pulses. Due to the solvent dependence of the nonlinear behavior of the silver nanowires, the nonlinear absorption and refraction of silver nanowires suspended in de-ionized water are smaller than those of silver samples suspended in ethanol. The thermal nonlinearities are insignificant in our experimental conditions.     

Bactericidal effects of Ag nanoparticles immobilized on surface of SiO2 thin film with high concentration

Bactericidal activity of high concentration Ag nanoparticles immobilized on surface of an aqueous sol–gel silica thin film was investigated against Escherichia coli and Staphylococcus aureus bacteria. Size of the surface nanoparticles was estimated in the range of 35–80 nm by using atomic force microscopy. Due to accumulation of the silver nanoparticles at near the surface (at depth of 6 nm and about 40 times greater than the silver concentration in the sol), the synthesized Ag–SiO₂ thin film (with area of 10 mm²) presented strong antibacterial activities against E. coli and S. aureus bacteria with relative rate of reduction of the viable bacteria of 1.05 and 0.73 h⁻¹ for initial concentration of about 10⁵ cfu/ml, respectively. In addition, the dominant mechanism of silver release in long times was determined based on water diffusion in surface pores of the silica film, unlike the usual diffusion of water on the surface of silver-based bulk materials. Therefore, the Ag nanoparticles embedded near the surface of the SiO₂ thin film can be utilized in various antibacterial applications with a strong and long life activity.     

Fabrication and characterization of silver/titanium dioxide composite nanoparticles in ethylene glycol with alkaline solution through sonochemical process

This paper aims to study fabrication and characterization of silver/titanium oxide composite nanoparticle through sonochemical process in the presence of ethylene glycol with alkaline solution. By using ultrasonic irradiation of a mixture of silver nitrate, the dispersed TiO₂ nanoparticle in ethylene glycol associated with aqueous solution of sodium oxide yields Ag/TiO₂ composite nanoparticle with shell/core-type geometry. The powder X-ray diffraction (XRD) of the Ag/TiO₂ composites showed additional diffraction peaks corresponding to the face-centered cubic (fcc) structure of silver crystallization phase, apart from the signals from the cores of TiO₂. Transmission electron microscopy (TEM) images of Ag/TiO₂ composites, which average particle size is roughly 80 nm, reveal that the titanium oxide coated by Ag nanoparticle with a grain size of about 2–5 nm. Additionally, the formation of silver nanoparticles on TiO₂ was monitored by ultraviolet visible light spectrophotometer (UV–Vis). As measured the optical absorption spectra of as-synthesized Ag nanoparticle varying with time, the mechanism of surface formatting silver shell on the cores of TiO₂ could be explored by autocatalytic reaction; the conversion of Ag particle from silver ion is 98% for the reaction time of 1000 s; and the activity energy of synthesizing Ag nanoparticles on TiO₂ is 40 kJ/mol at temperature ranging from 5 to 25 °C. Hopefully, this preliminary investigation could be used for mass production of composite nanoparticles assisted by ultrasonic chemistry in the future.     

Biosynthesis of silver nanoparticles using <Emphasis Type="Italic">Ocimum sanctum</Emphasis> (Tulsi) leaf extract and screening its antimicrobial activity

Development of green nanotechnology is generating interest of researchers toward ecofriendly biosynthesis of nanoparticles. In this study, biosynthesis of stable silver nanoparticles was done using Tulsi (Ocimum sanctum) leaf extract. These biosynthesized nanoparticles were characterized with the help of UV–vis spectrophotometer, Atomic Absorption Spectroscopy (AAS), Dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Transmission electron microscopy (TEM). Stability of bioreduced silver nanoparticles was analyzed using UV–vis absorption spectra, and their antimicrobial activity was screened against both gram-negative and gram-positive microorganisms. It was observed that O. sanctum leaf extract can reduce silver ions into silver nanoparticles within 8 min of reaction time. Thus, this method can be used for rapid and ecofriendly biosynthesis of stable silver nanoparticles of size range 4–30 nm possessing antimicrobial activity suggesting their possible application in medical industry.     

Control of the aggregation behavior of silver nanoparticles in polyurethane matrix

By using N,N-dimethylformamide (DMF) as a solvent and reducing agent, and polyurethane (PU) as a structure-directing agent, flexible silver nanochains are formed under mild conditions with mean diameter of 15.97 and 35.6 nm, respectively. Some linear chain-like aggregates of silver nanoparticles with mean diameter of 6.69 nm are also formed by controlling the experimental condition. In parallel experiment, silver nanospheres with mean diameters of 5.76 nm, instead of nanochains are generated when antioxidants are added. After 3 days of aging, some nano clusters are transformed into triangular or hexagonal nanoplates. This aggregation behavior was characterized by UV–Vis spectroscopy, TEM, and powder X-ray diffraction. The aggregation mechanism of silver nanoparticles in the PU and ATPU was discussed. Our results provide potential application for new generation of nanodevice.     

In situ growth of silver nanoparticles in mesoporous silica by spray pyrolysis

Silver-dispersed mesoporous silica was in situ synthesized in aerosol phase. The solidification of silica was catalyzed in the presence of the silver, which increased the order and d values of the mesophase at given reactor temperature. Silver nanoparticles grew confined in the pores when the atomic % of silver to Si was below 10 and the pore wall turned to be impermeable above 400 °C. Silver permeated through the pore wall below 400 °C to grow freely in the carrier gas. The mesophase deteriorated using spray pyrolysis above 800 °C due to the further densification of silica, or above 10 at.% of silver due to the excessive growth within the phase. The highest dispersion of silver ~4 nm in diameter with the highest order of the mesoporosity was obtained at 600 °C with 5 at.% silver. Calcination following the spray pyrolysis further densified the silica phase to freeze the growth of silver particles as well as lower the d value of the mesophase.     

Enhancing properties of organic light-emitting diodes with LiF inside the hole transport layer

A new device has been made by inserting thin LiF layer in N,N′-diphenyl-N,N′-bis(1-napthyl–phenyl)-1, 1′-biphenyl-4,4′-diamine (NPB), which has a configuration of ITO/NPB(20 nm)/LiF(0.5 nm)/NPB(20 nm)/Alq₃(60 nm)/LiF(0.5 nm)/Al. Compared with normal device, the device inserted LiF layer inside NPB (HTL) can improve its performance. The luminance and efficiency is about 1.4 and 1.3 folds high of the conventional structure, respectively. The suggestion mechanism is that the LiF in the NPB layer can block holes of NPB, and balance the holes and electrons. Consequently, there are more excitons formed to boost the diode’s luminance and efficiency. And it may offer some valuable references for OLED’s structure.     

Nonlinear optical properties of silver colloidal solution by in situ synthesis technique

The silver colloidal solutions were prepared by in situ synthesis technique in the presence of the Polymethyl Methacrylate, which was polymerized by reversible addition-fragmentation transfer. The UV–VIS spectra and transmission electron microscopy had shown the formation of sphere silver nanoparticles with average size of 10 nm. Nonlinear optical properties as a function of silver concentration were studied using Z-scan technique with 13 ns pulse duration at 532 nm. The optical nonlinearity enhancement was observed by increasing the concentration. The third-order nonlinear susceptibility χ⁽³⁾ was measured to 1.045 × 10⁻¹¹ esu when the concentration was 2.13 mg/ml. Besides, the sample was founded to exhibit a shift from saturable absorption to reverse saturable absorption at higher incident laser energy. The reverse saturable absorption was observed to be responsible for the optical limiting characteristics in our experiments.     

Silvernanotherapy on the viral borne disease of silkworm <Emphasis Type="Italic">Bombyx mori</Emphasis> L.

Antiviral assays of chemically and biologically synthesized silver nanoparticles were made against BmNPV (Bombyx mori Nuclear Polyhedrosis Virus). Reduction of silver ions by sodium citrate and Spirulina platensis led to the formation of spherical silver nanoparticles of 40–60 and 7–16 nm size. Single cell protein (Spirulina platensis)-synthesized silver nanoparticles showed the strongest antiviral activity. Immunological studies made on the silkworm Bombyx mori disclosed that a significant increase in the total hemocyte count and differential hemocyte count due to S. platensis-synthesized silver nanoparticles supplementation. Improvement in the defense mechanism was noticed from the strengthened peritrophic membrane of the digestive tract and the increased total protein. Overall, the results presented illustrate that single cell protein-synthesized silver nanoparticles supplementation is effective in controlling viral-borne diseases of the silkworm.     

Synthesis of thiolate-protected silver nanocrystal superlattices from an organometallic precursor and formation of molecular di-<Emphasis Type="Italic">n</Emphasis>-alkyldisulfide lamellar phases

Abstract  

Silver nanocrystal superlattices (NCSs) stabilized by hexadecanethiol have been prepared through reduction of [Ag(hexadecanethiolate)] _n , formed in situ by reaction of the organometallic precursor [Ag(C₆F₅)] and hexadecanethiol. The nanostructures have been characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Several reaction parameters such as solvent (anisole or toluene), reaction temperature (150 or 120 °C) or silver:thiol ratio (1:1 or 2:1) have been studied. The NCSs are formed by silver nanoparticles which sizes range from 3.7 to 5.1 nm, depending on the reaction conditions. The formation a of lamellar phase of di-n-hexadecyldisulfide by oxidation of the hexadecanethiolate ligands bonded to Ag(I) is detected by XRD.     

Synthesis of highly fluorescent and thio-linkers stabilize gold quantum dots and nano clusters in DMF for bio-labeling

This study demonstrates a one versus two-step synthesis of fluorescent gold quantum dots (F-AuQDs) and nano clusters (F-AuNCs) functionalized with thiolated organic linkers using reduction of gold precursor in N,N′-dimethylformamide in 1 h of reaction. The F-AuQDs and F-AuNCs show fluorescence emission at 425 ± 5 nm upon excitation at 345 ± 5 nm of wavelength, with good water solubility and stability. Five different thiolated organic binary linkers consisting of various functional groups including: carboxylic acid, hydroxyl, and aromatic amine, were conjugated with the F-AuQDs and F-AuNCs. The formation mechanism and functionalization of the F-AuQDs and F-AuNCs was characterized using UV–vis absorption spectra, UV–vis light, fluorescent emission spectra, pH, TEM, and FTIR. The fluorescence emission of the F-AuQDs and F-AuNCs is greatly dependent on the thio-linker. This novel one-step approach provides facile and fast synthesis of F-AuQDs and F-AuNCs over the two-step method, with less than 5 h of reaction and workup compared to more than 28 h of reaction for the two-step approach. These thio-linker functionalized F-AuQDs and F-AuNCs have a wide application in fluorescent labeling of biomolecules, optical devices, imaging, energy transfer, and biosensing.     

Synthesis and photoluminescence properties of silver nanowires

Silver nanowires of 50–190 nm in diameters along with silver nanoparticles in the size range of 60–200 nm in prismatic and hexagonal shapes are synthesized through chemical process. The lengths of the silver nanowires lie between 40 and 1000 μm. The characterizations of the synthesized samples are done by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–visible absorption spectroscopy. The syntheses have been done by using two processes. In the first process, relatively thicker and longer silver nanowires are synthesized by a soft template liquid phase method at a reaction temperature of 70 °C with methanol as solvent. In the second process, thinner silver nanowires along with silver nanoparticles are prepared through a polymer mediated polyol process at a reaction temperature of 210 °C with ethylene glycol as solvent. The variations of photoluminescence (PL) emission from the silver nanocluster dispersed in methanol as well as in ethylene glycol are recorded at room temperature under excitation wavelengths lying in between 300 and 414 nm. The blue–green PL emission is observed from the prepared samples and these emissions are assigned to radiative recombination of Fermi level electrons and sp- or d-band holes.     

Power determination and hydrino product characterization of ultra-low field ignition of hydrated silver shots

Hydrated silver shots comprising a source of H and HOH catalyst were ignited by passing a low voltage, high current through the shot to produce explosive plasma that emitted brilliant light predominantly in the short-wavelength 10 to 300 nm region. Based on Stark broadening, the initially optically thick essentially 100% ionized plasma expanded at sound speed or greater and thinned to emit EUV and UV light. The peak power of 20 MW was measured using absolute spectroscopy over the 22.8–647 nm region wherein the optical emission energy was 250 times the applied energy. Synchronized high-speed video and spectroscopic recording of the plasma emission and the measurement of the applied ignition power over time showed that plasma persisted even after the ignition power decayed to zero. Continuous megawatt-level power was recorded on a hydrino reactor wherein continuous brilliant plasma was maintained by HOH and H produced from water-entrained injected molten silver matrix. The molten fuel produced the same EUV spectrum as the shots, but converted to 5700 K blackbody radiation of about 1 m² surface area with a positive feedback cycle of silver vaporization and absorption of the hydrino reaction emission with the plasma becoming increasingly optically thick. The calorimetrically measured power of a typical 80 mg, 10 microliter shot ignition released by the nascent HOH catalyzed transition of H to hydrino state H₂ (1/4) was 400,000 W. Based on the shockwave propagation velocity and the corresponding pressure, the high-current ignition of water in a silver matrix was measured to produce a shock wave that was equivalent to about 10 times more moles of gunpowder. The catalysis reaction product H₂(1/4) was identified by Raman spectroscopy, photoluminescence emission spectroscopy, X-ray photoelectron spectroscopy, and MAS ¹H NMR.     

Ultrafast reaction dynamics of the complete photo cycle of an indolylfulgimide studied by absorption, fluorescence and vibrational spectroscopy

The reaction dynamics of the complete photo cycle, ring-opening (C → E) and ring-closure (E → C), of N-methyl-(6-bromo-1,2-dimethyl-3-indolyl)fulgimide dissolved in acetonitrile are analysed via steady-state and ultrafast spectroscopy using transient absorption in the UV/VIS and mid-IR complemented by ultrafast fluorescence broad-band spectroscopy with a Kerr-gate setup. For the C → E ring-opening reaction induced by light at ~ 550 nm, a time constant of ~ 3 ps was found for the S₁ decay and the S₀ repopulation. Non-exponential signatures, which occur in the 10 ps time domain, were observed and are assigned to the cooling of hot molecules in the electronic ground state. The E → C reaction dynamics induced by UV-light pulses at 360 nm and 387 nm occur within less than 1 ps and are followed by vibrational cooling on the 10 ps time domain. Thus, both ring-opening and ring-closure reactions are completed within a few picoseconds. From transient IR studies and fluorescence measurements it is concluded that these pericyclic reactions occur from different geometries on the excited state potential energy surface.     

Highly bacterial resistant silver nanoparticles: synthesis and antibacterial activities

In this article, we describe a simple one-pot rapid synthesis route to produce uniform silver nanoparticles by thermal reduction of AgNO₃ using oleylamine as reducing and capping agent. To enhance the dispersal ability of as-synthesized hydrophobic silver nanoparticles in water, while maintaining their unique properties, a facile phase transfer mechanism has been developed using biocompatible block co-polymer pluronic F-127. Formation of silver nanoparticles is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopy. Hydrodynamic size and its distribution are obtained from dynamic light scattering (DLS). Hydrodynamic size and size distribution of as-synthesized and phase transferred silver nanoparticles are 8.2 ± 1.5 nm (σ = 18.3%) and 31.1 ± 4.5 nm (σ = 14.5%), respectively. Antimicrobial activities of hydrophilic silver nanoparticles is tested against two Gram positive (Bacillus megaterium and Staphylococcus aureus), and three Gram negative (Escherichia coli, Proteus vulgaris and Shigella sonnei) bacteria. Minimum inhibitory concentration (MIC) values obtained in the present study for the tested microorganisms are found much better than those reported for commercially available antibacterial agents.     

Use of a silver ion selective electrode to assess mechanisms responsible for biological effects of silver nanoparticles

For a detailed analysis of the biological effects of silver nanoparticles, discrimination between effects related to the nano-scale size of the particles and effects of released silver ions is required. Silver ions are either present in the initial particle dispersion or released by the nanoparticles over time. The aim of this study is to monitor the free silver ion activity {Ag⁺} in the presence of silver nanoparticles using a silver ion selective electrode. Therefore, silver in the form of silver nanoparticles, 4.2 ± 1.4 nm and 2–30 nm in size, or silver nitrate was added to cell culture media in the absence or presence of A549 cells as a model for human type II alveolar epithelial cells. The free silver ion activity measured after the addition of silver nanoparticles was determined by the initial ionic silver content. The p {Ag⁺} values indicated that the cell culture media decrease the free silver ion activity due to binding of silver ions by constituents of the media. In the presence of A549 cells, the free silver ion activity was further reduced. The morphology of A549 cells, cultivated in DME medium containing 9.1% (v/v) FBS, was affected by adding AgNO₃ at concentrations of ≥30 μM after 24 h. In comparison, silver nanoparticles up to a concentration of 200 μM Ag did not affect cellular morphology. Our experiments indicate that the effect of silver nanoparticles is mainly mediated by silver ions. An effect of silver on cellular morphology was observed at p {Ag⁺} ≤ 9.2.