Solvatochromic effect and kinetics of methyl violet reduction with potassium iodide in water–isopropanol mixtures

The solvent influence on the reduction kinetics of methyl violet with iodide in binary mixture of aqueous isopropanol was investigated spectrophotometrically. The absorption spectra of methyl violet were recorded in water, aqueous isopropanol and absolute isopropanol. In these solvents λ_max was in the range from 580.5 to 582.5 nm. The CNIBS/R-K model was used to calculate the solvatochromic parameters in a binary mixture; polynomial equation was also applied to describe the experimental data. The transition energies (E_T) were calculated. They show bathochromic shift with the decrease in the polarity of the solvent. The temperature was varied from 298–318 K, while the pH of the reaction was maintained at 4.99 and 6.00. The reduction reaction was found to be first order by potassium iodide and zero order by methyl violet. The thermodynamic parameters were also evaluated to support the kinetic data.     

Oxidation kinetics of crystal violet by potassium permanganate in acidic medium

The oxidation kinetics of crystal violet (a triphenylmethane dye) by potassium permanganate was focused in an acidic medium by the spectrophotometric method at 584 nm. The oxidation reaction of crystal violet by potassium permanganate is carried out in an acidic medium at different temperatures ranging within 298–318 K. The kinetic study was carried out to investigate the effect of the concentration, ionic strength and temperature. The reaction followed first order kinetics with respect to potassium permanganate and crystal violet and the overall rate of the reaction was found to be second order. Thermodynamic activation parameters like the activation energy (E_a), enthalpy change (ΔH*), free energy change (ΔG*), and entropy change (ΔS*) have also been evaluated.     

Anodic Cleavage of Several Ketone N-Phenylsemicarbazones into Methyl N-Phenylcarbamate and the Corresponding Dimethyl Acetals

Several ketone N-phenylsemicarbazones were electrooxidized in the presence of potassium iodide and a base using methanol as the solvent to give nearly commensurate amounts of methyl N-phenylcarbamate and the corresponding dimethyl acetals. Continuous evolution of gaseous nitrogen was observed from the anolyte during the electrooxidation. The reactions were carried out under very mild reaction conditions and are presumed to proceed through a four-electron oxidation process, in which the iodide ion plays an important role as an electron carrier.     

The Photokinetics of Electron Transfer Reaction of Methylene Blue with Titanium Trichloride in Aqueous–Alcoholic Solvents

The kinetics of photoinduced electron transfer reaction of methylene blue (MB) and titanium trichloride was investigated in water and different aqueous–alcoholic solvents. The reaction is pseudo‐first order, dependent only on the concentration of titanium trichloride at a fixed concentration of MB. The effect of water and aqueous–alcoholic solvents was studied in the acidic pH range (4–7). It was observed that the quantum yield (ϕ ) of the reaction increased with increase in polarity of the reaction medium. The quantum yield was high under acidic conditions and decreased with further increase in acidity. The addition of ions and increase in temperature increased the rate and quantum yield of the reaction. The absence of any reaction intermediate was confirmed by spectroscopic investigations. A mechanism for the reaction has been proposed in accordance with the kinetics of the reaction. The activation energy (E _a) was calculated by the Arrhenius relation. Thermodynamic parameters such as E _a, enthalpy change (ΔH ), free energy change (ΔG ), and entropy change (ΔS ) were also evaluated.     

Kinetics of the Exothermic Decomposition Reaction of N-Methyl-N-nitro-2,2,2- trinitroethanamine

The thermal behavior and kinetic parameters of the exothermic decomposition reaction of N-methyl-N-nitro-2,2,2-trinitroethanamine in a temperature-programmed mode have been investigated by means of differential scanning calorimetry (DSC).The kinetic equation of the exothermic decomposition process of the compound is proposed. The values of the apparent activation energy (Ea), pre-exponential factor (A), entropy of activation (ΔS^≠ ), enthalpy of activation (ΔH^≠ ), and free energy of activation (ΔG^≠ ) of this reaction and the critical temperature of thermal explosion of the compound are reported. Information is obtained on the mechanism of the initial stage of the thermal decomposition of the compound.     

Triphenylarsine as an effective catalyst in a mechanistic investigation of trans- 1, 2-di (methoxycarbonyl)-6, 6-dimethyl-5, 7-dioxaspiro [2, 5] octane-4, 8-dione formation

The kinetics and mechanism of the reaction between dimethyl acetylendicarboxylate (DMAD) and Meldrum's acid (MA) in the presence of triphenylarsine (TPA) as a catalyst were investigated in a methanol environment by the UV/vis spectrophotometry technique. In this work, the reaction followed second- order kinetics and the first and second steps of the reaction mechanism were recognized as the fast and rate-determining step (RDS), respectively. A significant point in this reaction “in comparison with previous work” is related to the change in behavior of the kinetics and reaction mechanism in the presence of triphenylarsine (TPA). Activation energy and parameters (E_a, ΔH^?, ΔS^?, and ΔG^?) were determined for the reaction and a comparison between ΔH^? and TΔS^? values showed that the reaction is entropy-controlled. High values of the activation Gibbs free energy indicated that the reaction was chemically controlled. Also, the large negative value of ΔS^? implied an associative mechanism.     

Azetidinyl ketone chemistry. C-Methylation reactions and stereostructure - spectra relationships

The C-methylation of the potassium salt of 1-t-butyl-2-phenyl-3-(p-phenylbenzoyl)azetidine ( 1a ) with methyl iodide was studied in three solvents, and the stereochemical outcome of the reaction was shown to be dependent upon the solvent used. These results are rationalized in terms of the probable relative rates of the reaction in the various solvents and/or the effect of solvent on the structure of the anionic intermediate. Similar treatment of the potassium salt of 1-t-butyl-2-phenyl-3-benzoylazetidine ( 3a ) in ethyl ether gave a comparable result. The configurations of the epimeric C-methyl products ( 2a and 2b , and 4a ) were assigned on the basis of their spectral properties. With the aid of spectral data for a model compound, l-t-butyl-3-benzoyl-azetidine ( 5 ), several stereostructure-spectra relationships for 3-azetidinyl ketones are presented.     

Steric effects upon transition states of radical addition polymerizations

Transition states (TSs) of radical addition homopolymerization reactions of methyl acrylate, methyl methacrylate, dimethyl itaconate, and N-methyl itaconimide were examined with two-unit radical models using MOPAC (PM3 UHF) semiempirical method. Calculated activation energies (E_as) show good correlations with experimental values. Calculated activation entropies (−ΔS^‡s) are found to be well proportional to E_as. The entropy terms play an important role as well as E_a in radical additions. E_a depends on the angle (θ_rs) between reaction points of radical and of monomer at TS. The bond length between reaction points at TS is constant regardless of monomers studied. The geometries and thermodynamical properties calculated here for TS indicate the importance of steric effects caused by substituted group(s) rather than electronic perturbation energies reported previously. © 1996 John Wiley & Sons, Inc.     

Cobalt-catalyzed low pressure double carbonylation of aryl and secondary benzyl halides

α-Ketoacids can be easily synthesized with satisfactory yields and selectivities by carbonylation of aryl halides and secondary benzyl halides under very mild conditions. The reactions are catalyzed by Co₂(CO)₈ in alcoholic solvents; the presence of a methyl source (dimethyl sulfate or methyl iodide) is necessary for the carbonylation of the aryl halides. Base, temperature and solvent have large effects on the course of the reaction.     

Kinetics and thermodynamics of the blocking reaction of several aliphatic isocyanates

The oxime-blocking reaction of several aliphatic isocyanates, such as 1,6-Hexane diisocyanate (HDI), isophorone diisocyanate (IPDI), and dicyclohexylmethane-4,4′-diisocyanate (H₁₂MDI), is investigated. The reaction is carried on in various solvents that are divided into two categories: aromatic solvents and oxygen-contained solvents. In situ FT-IR is used to monitor the reaction and show the large difference of solvent and the structure of isocyanate. Kinetic studies indicate that the reaction rate appears faster in aromatic solvents although the polarity of aromatic solvents is lower. Then, thermodynamic parameters of the blocking reaction, such as activation energy (E_a), enthalpy (ΔH*) and entropy (ΔS*), are determined from the Arrhenius and Eyring equations. It is found that activation energy in aromatic solvents is higher, but the reaction rate is much faster, all of which are discussed corresponding to the reaction mechanism.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Synthesis of thieno[2,3-c:5,4-c]dipyridine and the one electron transfer properties of its dimethyl diquaternary salt

Thieno[2,3-c:5,4-c]dipyridine is synthesised by reaction of 3,3′-thiobispyridine with sodium and liquid ammonia in dimethylformamide. It forms a diquaternary salt with excess methyl iodide. The salt is reversibly reduced to a stable blue-green radical cation in aqueous solution at a potential (E_σ) of -0.38V.     

Synthesis and reactions of 2H-Benzothieno[3,2-d][1,3]oxazine-2,4(1H)-dione

The title compound 5 is synthesized by the reaction of the potassium salt of 3-aminobenzo[b]thiophene-2-carboxylic acid with phosgene. Compound 5 is readily alkylated to give 6 with methyl iodide, benzyl bromide, or propargyl bromide in the presence of sodium hydride. Reaction of 5 and 6 with nucleophiles follows specifically different pathways. Compound 5 is readily ionized to the isocycanate species 13 and subsequently reacts with methanol or methylamine to produce exclusively the carbamate 7 or ureido acid 9 . The N-substituted derivative 6 , in analogous reactions with methanol or methylamine, produce exclusively the amino ester 8 or the amino amide 10 . The N-benzyl derivative 6b reacts with the cyclic S-methylthiopseudourea 11 to give the tetracycle 12 , a new ring system.     

Characterization of azo-containing polydimethylsiloxanes and their copolymers with methyl methacrylate

Azo group-containing polydimethylsiloxanes (PDMS–ACP), macroazoinitiators, were prepared by polycondensation reaction of 4,4′-azobis-4-cyanopentanoyl chloride (ACPC) with hydroxybutyl-terminated polydimethylsiloxane (PDMS) of varying molecular weights. The activation energy (E_a), activation enthalpy (ΔH^‡), and activation entropy (ΔS^‡) of the thermodecomposition of PDMS-ACP in toluene increased with increase in poly-dimethyl-siloxane chain length (SCL) in PDMS moieties, while the activation free energy (ΔG^‡) was independent on the SCL. The polydimethylsiloxane-poly(methyl methacrylate) block copolymers (PDMS-b-PMMA) were prepared by the use of PDMS-ACP macroazoinitiators, and they were characterized by ¹H-, ²⁹Si-, and ¹³C-nuclear magnetic resonance (NMR) spectroscopies. The microstructure and morphology of copolymers were investigated by proton spin–spin relaxation measurements and scanning electron microscopy (SEM). © 1996 John Wiley & Sons, Inc.     

Polarographic study of the effect of solvents on the reaction of Na amalgam with some vinyl monomers

Acrylonitrile, methacrylonitrile, ethyl acrylate, anthracene, and Na⁺ were studied polarographically in four solvent media: diglyme, DMSO, 25% H₂O in diglyme, and liquid NH₃. Cathodic shifts were observed for Na⁺ and anodic shifts for the vinyl monomers in DMSO, H₂O and NH₃. The values of ΔE = (E_{1/2, monomer} — E_{1/2, Na}⁺) were used in interpretation of the solvent effects observed previously for the reaction of these monomers with Na amalgam. In diglyme ΔE is very large (0.49 V for MeAN and 0.37 V) for AN, and therefore very slow reaction takes place. In DMSO, MeAN still reacts very slowly (ΔE = 0.23 V), while AN (ΔE = 0.09 V) reacts considerably faster than in diglyme and 100 times faster than MeAN in DMSO. Liquid ammonia brings both MeAN and AN to very low ΔE (0.08 V and ?0.05 V, respectively), and both reactions are very fast and yield only the hydrodimers. Water, on the other hand, has a large accelerating effect on the rate, but as it is a proton donor it yields only the reduced products.     

Synthesis and characterization of carboxylic acid‐terminated polyisobutylenes

tert-Chloride-terminated polyisobutylenes (PIB) (1020 ≤ M_n ≤ 6700 g/mol) were dehydrochlorinated nonregiospecifically using basic alumina, or regiospecifically either via potassium tert-butoxide or in situ quenching of quasiliving PIB. Olefin-terminated PIBs were quantitatively ozonized at −78 °C using hexane/methylene chloride/methanol, 62/31/7 (v/v/v) cosolvents, and an ozone generator, employing pure oxygen as source gas. The primary ozonides were reduced using trimethyl phosphite to yield pure PIB methyl ketone from exo-olefin PIB, and a mixture of PIB methyl ketone and PIB aldehyde from mixed olefin-PIB. PIB methyl ketone was oxidized to carboxylate via the haloform reaction; titration revealed near-quantitative functionalization, but the reaction was slow. Tetrahalomethane oxidation was identified as a preferred alternative method, and was conducted using either CCl₄ as the reaction solvent, THF as the solvent with CCl₄ in reagent amounts, or hexane as the solvent with a phase-transfer catalyst and CCl₄ in reagent amounts. The system using hexane, with tetra-n-butyl ammonium chloride as phase-transfer catalyst, showed complete conversion in ∼ 4 h. PIB carboxylic acid was recovered by acidification and isolation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3229–3240, 2008     

Kinetic study of the oxidative addition of methyl iodide to Vaska’s complex in ionic liquids

Oxidative addition of methyl iodide to Vaska’s complex in the ionic liquids 1-butyl-3-methylimidazolium triflate [C₄mim][OTf], [C₄mim] bis(trifluormethylsulfonyl)imide [Tf₂N], and N-hexylpyridinium [C₆pyr][Tf₂N] occurred cleanly to give the expected Ir(III) oxidative addition product. Pseudo-first order rate constants were determined for the oxidative addition reaction in each solvent ([Vaska’s] = 0.25 mM, [CH₃I] = 37.5 mM). The observed rate constants under these conditions were 5-10 times slower than the rate seen in DMF. At high methyl iodide concentrations (>23 mM), the expected first order dependence on methyl iodide was not observed. In each ionic liquid, there was no change in the reaction rates within experimental error over the methyl iodide concentration range of 23-75 mM. At lower methyl iodide concentration, a decrease in rate was observed in [C₄mim][Tf₂N] with decreasing concentration of methyl iodide.     

Kinetic study of ethylene polymerization with chromium oxide catalysts by a radiotracer technique

The quenching of polymerization with a chromium oxide catalyst by radioactive methanol ¹⁴CH₃OH enables one to determine the concentration of propagation centers and then to calculate the rate constant of the propagation. The dependence of the concentration of propagation centers and the polymerization rate on reaction time, ethylene concentration, and temperature was investigated. The change of the concentration of propagation centers with the duration of polymerization was found to be responsible for the time dependence of the overall polymerization rate. The propagation reaction is of first order on ethylene concentration in the pressure range 2–25 kg/cm². For catalysts of different composition, the temperature dependence of the overall polymerization rate and the propagation rate constant were determined, and the overall activation energy E_ov and activation energy of the propagation state E_p were calculated. The difference between E_ov and E_p is due to the change of the number of propagation centers with temperature. The variation of catalyst composition and preliminary reduction of the catalyst influence the shape of the temperature dependence of the propagation center concentration and change E_ov.     

Convenient Route to Primary (Z)-Allyl Amines and Homologs

A convenient two-step procedure for the synthesis of primary (Z)-allyl amines, (Z)-homoallyl amines [(Z)-but-3-enylamines], and (Z)-pent-4-enylamines using the Wittig reaction was achieved. The use of nonstabilized ylides from triphenylphosphonium salt, potassium salt, and apolar solvent produced (Z/E)-geometric isomer ratios generally greater than 1.6. The amine moiety was masked using a phtalimide group that was removed successfully in the last step of the process in two different conditions, NH₂NH₂/EtOH/rt or CH₃NH₂/EtOH/rt. However, in some cases, reduction of the C = C double bond in the deprotection with hydrazine was concomitantly observed.     

Studies on the polymerization of methyl methacrylate activated by azobisisobutyramidine

Kinetic studies on methyl methacrylate polymerization were carried out with watersoluble 2,2′-azobisisobutyramidine (ABA). The rate of polymerization was proportional to the square root of the initiator concentration in the solvents chloroform, methanol, and dimethyl sulfoxide (DMSO), which confirms the bimolecular nature of the termination reaction. The monomer exponent was unity in chloroform but in methanol and DMSO the rate of polymerization passed through a maximum when plotted against the monmer concentration. This behavior in methanol has been attributed to be due to the enhanced rate of production of radical with increasing proportion of methanol. The rate of decomposition of the ABA has been observed to be faster in methanol than in chloroform. The situation becomes more complicated with DMSO, which was found to reduce the value of δ = (2k_t)^1/2/k_p in methyl methacrylate polymerization. The rate of polymerization was observed to be highly dependent on the nature of the solvent, the rate increasing with increased electrophilicity of the solvent. The dependence of R_p on the solvent has been explained in the light of the stabilization of the transition state due to increased solvation of the basic amidine group of the initiator with the increased electrophilicity of the solvent.