Preparation of cellulose nanofibers with hydrophobic surface characteristics

The aim of this study was to develop cellulose nanofibers with hydrophobic surface characteristics using chemical modification. Kenaf fibers were modified using acetic anhydride and cellulose nanofibers were isolated from the acetylated kenaf using mechanical isolation methods. Fourier transform infrared spectroscopy (FTIR) indicated acetylation of the hydroxyl groups of cellulose. The study of the dispersion demonstrated that acetylated cellulose nanofibers formed stable, well-dispersed suspensions in both acetone and ethanol. The contact angle measurements showed that the surface characteristics of nanofibers were changed from hydrophilic to more hydrophobic when acetylated. The microscopy study showed that the acetylation caused a swelling of the kenaf fiber cell wall and that the diameters of isolated nanofibers were between 5 and 50 nm. X-ray analysis showed that the acetylation process reduced the crystallinity of the fibers, whereas mechanical isolation increased it. The method used provides a novel processing route for producing cellulose nanofibers with hydrophobic surfaces.     

Acetylation of beta-cyclodextrin surface-functionalized cellulose dialysis membranes with enhanced chiral separation

The enhanced enantiomeric separation of racemic phenylalanine solution has been demonstrated by the membrane-based chiral resolution method using an acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. Beta-cyclodextrin (CD) was first immobilized onto the surface of commercial cellulose dialysis membranes, followed by the acetylation reaction through the treatment of the membranes with acetic anhydride to form the chiral selective acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. The acetylated CD-immobilized membrane exhibits enantioselectivity in the range of 1.26-1.33 depending on the acetylation time. The improvement in enantioselectivity after acetylation was mainly attributed to the better discrimination ability of acetylated CD and the decrease in membrane pore size. Molecular modeling simulations indicate that the acetylation of hydroxyl groups would result in a CD conformation with torus distortions and would create higher steric hindrance for penetrants. As a result, compared to the original CD, the acetylated CD may have less effective binding but better discrimination of enantiomers. The energy drop is only 3 kcal/mol between different enantiomers before and after the binding of phenylalanine with an unmodified CD. The energy drop increases to 10 kcal/mol if acetylated CD is employed as the chiral selector, showing stronger characteristics for chiral selection.     

Ultrastructural aspects of the acetylation of cellulose

An ultrastructural study of the acetylation of cellulose was achieved by subjecting well characterized cellulose samples fromValonia cell wall and tunicin tests to homogeneous and heterogeneous acetylation. The study involved transmission electron microscopy observations on negatively stained microcrystals as well as diffraction contrast images of the cross sections of wall fragments at various stages of the reaction. These observations showed that the acetylation of crystalline cellulose proceeds by a reduction of the diameters of the crystals while their lengths are reduced to a lower extent. These results were corroborated by electron and X-ray diffraction experiments that showed that during the reaction there was a rapid decrease in the intensities of the equatorial diffraction spots of cellulose, whereas those located on the meridian or close to the meridian stayed constant. A model of acetylation of the cellulose crystal is presented. It is based on a non swelling reaction mechanism that affects only the cellulose chains located at the crystal surface. In the case of homogeneous acetylation, the partially acetylated molecules are sucked into the acetylating medium as soon as they are sufficiently soluble. In heterogeneous conditions the cellulose acetate remains insoluble and surrounds the crystalline core of unreacted cellulose.     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.     

On the mechanism of the unwanted acetylation of polysaccharides by 1,3-dialkylimidazolium acetate ionic liquids: part 2—the impact of lignin on the kinetics of cellulose acetylation

Cellulose acetylation has been reported as a side reaction of cellulose treatment with the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIm][OAc]) (Karatzos et al. in Cellulose 19:307–312, 2012) and other 1,3-dialkylimidazolium acetate ionic liquids. 1-Acetylimidazole (AcIm), an [EMIm][OAc] impurity, has been found to be the actual acetylating agent (Zweckmair et al. in Cellulose 22:3583–3596, 2015), and the degree of acetylation was relatively low, below a DS of approx. 0.1%. Higher degrees of cellulose acetylation (DS > 10%) have been observed when the entire wood was mixed with [EMIm][OAc] instead of cellulosic pulp only (Abushammala et al. in Carbohydr Polym 134:609–616, 2015). In this paper, we explore the impact of wood constituents, mainly lignin, on cellulose acetylation using AcIm. The results demonstrate that lignin itself can be readily acetylated upon mixing with AcIm, and—noteworthy—that lignin presence significantly accelerates cellulose acetylation. The initial rate of cellulose acetylation by AcIm increased from 1.8 to 4.7%/h when only 1% of lignin, based on cellulose mass, was added. A mechanistic study employing cellulose and lignin model compounds showed lignin to be more susceptible to acetylation than cellulose and to act as an intermediate acetyl group source for further cellulose acetylation in a catalytic scenario.     

Acetylation of DMSO:PF solutions of cellulose

Three different techniques for esterifying solutions of cellulose dissolved in mixtures of dimethyl sulfoxide (DMSO) and paraformaldehyde (PF) were evaluated and are herein described. The evaluation and development of suitable synthetic procedures and the characteristics of the resulting acetylated cellulose are reported. Glacial acetic acid (glacial HOAc), acetyl chloride (AcCl), and acetic anhydride (Ac₂O) were compared as acetylating agents for solutions of cellulose in DMSO:PF, and it was demonstrated that mixtures of pyridine (Py) and Ac₂O rapidly acetylated the cellulose to yield beige to amber acetone-soluble cellulose acetates which were partially oxidized. These thermoplastic resins exhibited softening points between 80 and 110°C and thermal stabilities (in nitrogen atmospheres) similar to those of native celluloses (350 to 375°C). Degree of acetyl substitution (DS) values ranged from 0 to 2.0 as a function of acetylation time.     

Properties of surface acetylated microfibrillated cellulose relative to intra- and inter-fibril bonding

Microfibrillated cellulose (MFC) created via the micro-grinding method was heterogeneously acetylated to different substitution levels using acetic anhydride and heat rather than strong acid catalysis. The acetylated MFC was formed into thin films and characterized by infrared spectroscopy and mechanical testing. Spectral and chemical analysis confirmed controlled acetylation with increased reaction time. Due to microfibrils forming more inter-fibril bonds than whole fibers, it is generally accepted that there are more hydrogen bonds to carry the applied load. However, with increased acetylation, the initial number of possible hydrogen bonds was decreased which led to a lower tensile strength and rupture energy. At 28 % degree of substitution, the tensile index decreased to 50 % of the initial value, whereas the rupture energy was nearly completely eliminated. The acetylated fibrils, thus, created a structure that resembled the energy absorption behavior of whole fiber sheets, but behaved differently when compared in terms of tensile index.     

Acetylation and stepwise solvent-exchange to modify hydrophilic cellulose whiskers to polychloroprene-compatible nanofiller

The acetylation of cellulose nanofiber (CNF) introduced hydrophobicity to the surface making it compatible with non-polar matrix, and also making it an effective nanofiller for polychloroprene (PCR) composite. The CNF was extracted from oil palm empty fruit bunches. Previously, CNF was dispersed in water, and this water was subsequently substituted with N,N-dimethylacetamide, in which CNF was acetylated by acetic anhydride with a pyridine catalyst. IR spectroscopy revealed that the acetylation extent was controllable by the reaction time. After the reaction, the DMAc was replaced by dichloromethane, and finally mixed with PCR. The CNF–PCR mixture was cast and composite film was formed at room temperature. Structural analysis and mechanical tests indicated that acetylation treatment made CNF compatible with PCR, and that nano-dispersed CNF raised the mechanical strength of the PCR–CNF nanocomposite.     

Chemically imaging the interaction of acetylated nanocrystalline cellulose (NCC) with a polylactic acid (PLA) polymer matrix

The non-covalent interaction of acetylated nanocrystalline cellulose (AC-NCC) with polylactic acid (PLA) in a composite blend has been studied at the micron scale by synchrotron Fourier transform infrared (FTIR) microspectroscopy. Microtomed sections of AC-NCC in PLA showed strong, localized carbonyl stretching (νC=O) absorbance characteristic of the cellulose acetylation, and this was observed on the surface of larger aggregated AC-NCC particles. A shift in the νC=O IR absorption peak of AC-NCC in PLA, relative to unblended AC-NCC was observed, which is indicative of an intermolecular interaction between AC-NCC and PLA matrix. Acetylation can therefore potentially improve the performance of the composite by enabling linkages between carbonyl groups, helping to establish a good stress transfer between the fiber and the matrix. This could in turn lead to a material with high yield elastic modulus. This is the first reported chemical imaging of acetylated nanocrystalline cellulose-based composite materials using synchrotron FTIR microspectroscopy.     

纳米纤维素晶须的表面醋酸酯化改性及复合材料的力学性能

采用硫酸水解法制备纳米纤维素晶须, 再以冰醋酸为分散介质, 浓硫酸为催化剂, 醋酸酐为酯化剂对纳米纤维素晶须进行不同程度醋酸酯化改性, 得到醋酸酯化的纳米纤维素. 采用红外光谱(FTIR)、 X射线光衍射(XRD)、 透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对改性产物进行分析和表征. 结果表明, 改性纳米纤维素晶须中醋酸酯基的平均取代度过小或过大时均不适宜用作复合材料的增强相. 当改性纳米纤维素晶须中醋酸酯基的平均取代度为0.05时, 醋酸酯化反应只发生在纳米纤维素晶须的表面. 此时, 晶须能在丙酮中稳定悬浮, 表现出流动双折射现象, 并保持了改性前纳米纤维素晶须的棒状形态和高结晶度. 将这种改性后的纳米纤维素晶须作为增强相与醋酸纤维素通过溶液浇铸法制成纳米复合膜, 结果显示, 与空白醋酸纤维素膜相比, 添加改性纳米纤维素晶须后, 纳米复合膜的拉伸强度、 杨氏模量和断裂伸长率都得到了提高. 在玻璃化转变区间纳米复合膜储能模量的降低幅度小于空白膜.     

Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose

Cellulose acetate (CA) is one of the most important cellulose derivatives and its main applications are its use in membranes, films, fibers, plastics and filters. CAs are produced from cellulose sources such as: cotton, sugar cane bagasse, wood and others. One promissory source of cellulose is bacterial cellulose (BC). In this work, CA was produced from the homogeneous acetylation reaction of bacterial cellulose. Degree of substitution (DS) values can be controlled by the acetylation time. The characterization of CA samples showed the formation of a heterogeneous structure for CA samples submitted to a short acetylation time. A more homogeneous structure was produced for samples prepared with a long acetylation time. This fact changes the thermal behavior of the CA samples. Thermal characterization revealed that samples submitted to longer acetylation times display higher crystallinity and thermal stability than samples submitted to a short acetylation time. The observation of these characteristics is important for the production of cellulose acetate from this alternative source.     

Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Cellulose, which comprises D-glucose and L-glucose (D,L-cellulose), was synthesized from D-glucose (1D) and L-glucose (1L) via cationic ring-opening polymerization. Specifically, the ring-opening copolymerization of 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2D) and 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2L), synthesized from compounds 1D and 1L, respectively, in a 1:1 ratio, afforded 3-O-benzyl-2,6-di-O-β-D,L-glucopyranan (3DL) with a degree of polymerization (DPn) of 28.5 (Mw/Mn?=?1.90) in quantitative yield. The deprotection of compound 3DL and subsequent acetylation proceeded smoothly to afford acetylated compound 4DL with a DPn of 18.6 (Mw/Mn?=?2.08). The specific rotation of acetylated compound 4DL was?+?0.01°, suggesting that acetylated compound 4DL was optically inactive cellulose triacetate. Furthermore, before acetylation, compound 4DL was an optically inactive cellulose comprising an almost racemic mixture of D-glucose and L-glucose. Compound 4DL was an amorphous polymer. This is the first reported synthesis of optically inactive D,L-cellulose.

     

松木屑在AmimCl离子液体中的原位均相乙酰化

不使用任何催化剂, 在离子液体1-烯丙基-3-甲基咪唑氯盐(AmimCl)中实现了松木屑的一步均相乙酰化, 乙酰化松木的质量增重(WPG)范围在-89％～156％之间. 研究表明, 在均相条件下, 可以通过控制乙酰化时间, 乙酰化温度及乙酸酐/OH的摩尔比来控制乙酰化松木的WPG值. 用FTIR, 13C NMR, TGA 和 SEM对乙酰化松木进行表征. 结果表明, 13C NMR和FTIR谱图有明显的乙酰基特征峰, 且乙酰化松木的结构均匀致密, 其热稳定性高达205 ℃, 略低于原生松木.     

Prehump in the gel-permeation chromatography fractionation of pulp cellulose acetate

GPC chromatograms of cellulose acetate made from wood pulp customarily show a shoulder or small separate peak at the high end of the DP distribution. Material isolated from this “prehump” area is considerably enriched in mannose and xylose, and the size of the prehump in acetates from different pulps correlates with the amount of hemicellulose in the pulp. Prehump is not ordinarily found in cellulose acetate made from linters but was induced by adding mannan at the start of the acetylation, or by prolonging the acetylation beyond the time when the cellulose acetate sulfate triester is first formed. Products of poor solubility, as indicated by increased haze and false viscosity, resulted in both cases. Prehump was reduced in pulp cellulose acetate by many of the steps which give products of improved solubility: mercerization of cellulose prior to acetylation, use of more sulfuric acid catalyst, replacement of part of the acetic acid with methylene chloride during acetylation, and by removal of a small amount of high viscosity or poorly soluble material by fractional precipitation.     

Global proteomic analysis of lysine acetylation in zebrafish (Danio rerio) embryos

Lysine acetylation is an important post‐translational modification (PTM). Since the development of MS‐based proteomics technology, important roles of lysine acetylation beyond histones have focused on chromatin remodeling during the cell cycle and regulation of nuclear transport, metabolism, and translation. Zebrafish (Danio rerio) is a widely used vertebrate model in genetics and biologic studies. Although studies in several mammalian species have been performed, the mechanism of lysine acetylation in D. rerio embryos is incompletely understood. Here, we investigated the global acetylome in D. rerio embryos by using an MS‐based proteomics approach. We identified 351 acetylated peptides and 377 nonredundant acetylation sites on 189 lysine‐acetylated proteins in 5‐day postfertilization (hpf) embryos of D. rerio. Among lysine‐acetylated peptides, 40.2% indicated three motifs: (ac)KxxxK, (ac)KxxxxK, and Lx(ac)K. Of 190 acetylated proteins, 81 (42.6%) were mainly distributed in the cytoplasm. Gene ontology enrichment and Kyoto Encyclopedia of Genes and Genomes pathway analyses showed that lysine acetylation in D. rerio was enriched in metabolic pathways. Additionally, 17 of 30 acetylated ribosomal proteins were evolutionarily conserved between zebrafish and humans. Our results indicate that acetyllysine might have regulatory effects on ribosomal proteins involved in protein biosynthesis.     

Chemically extracted nanocellulose from sisal fibres by a simple and industrially relevant process

A novel type of acetylated cellulose nanofibre (CNF) was extracted successfully from sisal fibres using chemical methods. Initially, a strong alkali treatment was used to swell the fibres, followed by a bleaching step to remove the residual lignin and finally an acetylation step to reduce the impact of the intermolecular hydrogen bonds in the nanocellulose. The result of this sequence of up-scalable chemical treatments was a pulp consisting mainly of micro-sized fibres, which allowed simpler handling through filtration and purification steps and permitted the isolation of an intermediate product with a high solids content. An aqueous dispersion of CNF could be obtained directly from this intermediate pulp by simple magnetic stirring. As a proof of concept, the dispersion was used directly for preparing a highly translucent CNF film, illustrating that there are no large aggregates in the prepared CNF dispersion. Finally, CNF films with alkali extracts were also prepared, resulting in flatter films with an increased mass yield and improved mechanical strength.     

The application of a hypothesis-driven strategy to the sensitive detection and location of acetylated lysine residues

The application of a hypothesis-driven method for the sensitive determination of lysine acetylation sites on enzymatically digested proteins is described. Comparative sensitivity tests were carried out using serial dilution of an acetylated bovine serum albumin (AcBSA) digest to assess the performance of a multiple reaction monitoring (MRM)-based approach as compared to a more conventional precursor scanning (PS) method. Both methods were capable of selectively detecting an acetylated peptide at the low femtomole level when spiked into a background of 500 fmol six-protein tryptic digest. The MRM approach was roughly tenfold more sensitive than precursor scanning with one acetylated peptide detected and sequenced at the level of 2 fmol on-column. The technique was subsequently applied to a gel-derived sample of cytokeratin-8 (CK8) shown to contain acetylated lysine residues by Western blot analysis. The strategy applied herein, termed MRM-initiated detection and sequencing (MIDAS), resulted in the facile identification of novel sites of acetylation on this protein.