Excess Enthalpies of Binary Solvent Mixtures of γ-Butyrolactone with Hexan-1-ol,Heptan-1-ol,Octan-1-ol and Decan-1-ol

Abstract

The excess enthalpies of four alcohols with γ-butyrolactone were determined at 25°C, by a Parr 1451 solution Calorimeter. All the four systems showed endothermic behaviour. The results are explained on the basis of a steric effect on interaction. Enthalpies of mixing of binary mixtures do provide valuable insight into molecular interactions.     

Thermodynamic Properties of Binary Liquid Mixtures of n-Dodecane with an Alkan-1-ol or an Alkan-2-ol at 298.15 K: A Comparative Study

Experimental densities (ρ), viscosities (η), and speeds of sound (u) of the binary mixtures of n-dodecane with an alkan-1-ol (hexan-1-ol, heptan-1-ol, octan-1-ol) or an alkan-2-ol (hexan-2-ol, heptan-2-ol and octan-2-ol) were measured over the whole mixture composition range at T = 298.15 K. From these data, the excess molar volume ( $ V_{\text{m}}^{\text{E}} $ V m E ), deviations in viscosity (Δη), and excess isentropic compressibility ( $ \kappa_{S}^{\text{E}} $ κ S E ) have been calculated. The results were fitted by means of the Redlich–Kister equation, in order to estimate the binary coefficients and standard errors. Differences among these binary systems are ascribed to the different association abilities of the alkan-1-ols and alkan-2-ols. Experimental data on the constituted binaries were analyzed using McAllister’s multi-body interaction model, the Jouyban–Acree model, the Prigogine–Flory–Patterson theory, and the Bloomfield and Dewan model. The experimental and calculated quantities are used to study the nature of mixing behavior among the mixtures.     

Densities, Viscosities, Speeds of Sound, FT-IR and 1H-NMR Studies of Binary Mixtures of n-Butyl Acetate with Ethanol, Propan-1-ol, Butan-1-ol and Pentan-1-ol at?298.15, 303.15, 308.15 and 313.15?K

Densities, viscosities and speeds of sound of binary mixtures of ethanol, propan-1-ol, butan-1-ol and pentane-1-ol with n-butyl acetate have been measured over the entire range of composition at temperatures of 298.15, 303.15, 308.15 and 313.15 K and atmospheric pressure. From the experimental densities, viscosities and speeds of sound, the excess molar volumes V ^E, deviations in viscosity ????, and deviations in isentropic compressibility ???? _S have been calculated. The excess molar volumes and deviations in isentropic compressibility are positive for all the binary systems studied over the whole composition, while deviations in viscosities are negative for all of the binary mixtures. The excess molar volumes, deviations in viscosity, and deviations in isentropic compressibility have been fitted to a Redlich?CKister type polynomial equation. FTIR and ¹H-NMR studies of these mixtures are also reported.     

Enzymatic resolution of (±)-cis- and (±)-trans-1-aminoindan-2-ol and (±)-cis- and (±)-trans-2-aminoindan-1-ol

Pseudomonas cepacia lipase (PSL) efficiently catalyses the kinetic resolution of (±)-cis- and (±)-trans-1-aminoindan-2-ol through the O-acylation reaction of the corresponding N-benzyloxycarbonyl derivative using vinyl acetate as the acyl donor. In a similar way, cis-N-Cbz-2-aminoindan-1-ol is resolved when isopropenyl acetate is used as the acylating agent. The enantioselectivity of the reaction was lower for (±)-trans-N-Cbz-2-aminoindan-1-ol due to the different steric requirements for the two conformers of this substrate.     

Determination of Aristocularine Enantiomers by Dispersive Liquid–Liquid Microextraction and Chiral High-performance Liquid Chromatography

Here is reported a novel analytical approach for the extractive separation and determination of enantiomeric ratios of aristocularine in bovine serum albumin. The results demonstrate suitable analytical performances. The separation was performed by chiral high-performance liquid chromatography with a 5-µm column using a mobile phase of 1:1 n-hexane:ethanol at a flow rate of 0.7?mL?min^?1 with ultraviolet–visible absorption, circular dichroism, and polarimetric detection. The enantiomers were eluted at 13.2 and 15.6?min for (+) and (?)-aristocularine, with a resolution of 1.58 and a separation factor of 1.27. The analytical parameters for the dispersive liquid–liquid microextraction were optimized; under these conditions, the extraction recoveries were from 88.6% to 93.9% for a two-step extraction. The precision, reported as the percent relative standard deviation, had values from 2.9% to 3.2% for 0.5?µg?mL^?1 of analyte for five replicate measurements using ultraviolet–visible absorption and circular dichroism detection. The limits of detection were between 0.05 and 0.08?µg?mL^?1 with enrichment ratios up to a value of 12.     

Regioselective silylation of 5-(2′-hydroxyethyl)cyclopent-2-en-1-ol and 6-(2′-hydroxyethyl)cyclohex-2-en-1-ol

Herein we report regioselective and mild reactions for the tert-butyldimethylsilyl mono-protection of 5-(2′-hydroxyethyl)cyclopent-2-en-1-ol (2) and 6-(2′-hydroxyethyl)cycohex-2-en-1-ol (5) at the primary hydroxyl group or at the secondary allylic hydroxyl group. The different steric environment surrounding the secondary allylic and saturated primary alcohols is mainly invoked to rationalize the observed regioselectivity.     

A Dissipative Reaction Network Drives Transient Solid–Liquid and Liquid–Liquid Phase Cycling of Nanoparticles

Transient states maintained by energy dissipation are an essential feature of dynamic systems where structures and functions are regulated by fluxes of energy and matter through chemical reaction networks. Perfected in biology, chemically fueled dissipative networks incorporating nanoscale components allow the unique properties of nanomaterials to be bestowed with spatiotemporal adaptability and chemical responsiveness. We report the transient dispersion of gold nanoparticles in water, powered by dissipation of a chemical fuel. A dispersed state that is generated under non-equilibrium conditions permits fully reversible solid–liquid or liquid–liquid phase transfer. The molecular basis of the out-of-equilibrium process is reversible covalent modification of nanoparticle-bound ligands by a simple inorganic activator. Activator consumption by a coupled dissipative reaction network leads to autonomous cycling between phases. The out-of-equilibrium lifetime is tunable by adjusting the pH value, and reversible phase cycling is reproducible over several cycles.     

Ionic Liquid–Liquid Extraction and Supported Liquid Membrane Analysis of Lipophilic Wood Extractives from Dissolving-Grade Pulp

In this study, the extraction of lipophilic wood extractives from dissolving pulp samples using ionic liquid–liquid extraction and a two phase hollow fibre supported liquid membrane was investigated. Ionic liquids are capable of dissolving a range of organic and polymeric compounds and are biodegradable, with a negligible vapour pressure. Pulp samples were dissolved in a suitable amount of molten 1-butyl-3-methylimidazolium chloride to give 5 % cellulose solution. Pure cellulose was regenerated by adding water and filtered off. The ionic liquid-aqueous filtrate was first extracted for lipophilic extractives using liquid–liquid extraction. Then, a two phase hollow fibre supported liquid membrane extraction of lipophilic extractives was performed to extract the derivatized compounds prior to analysis by gas chromatography mass spectrometry. The operational parameters of this sample preparation approach were optimised using sterols and fatty acid methyl esters. The variation of enrichment factors and extraction efficiency with respect to liquid membrane, extraction time, stirring speed and sample pH were observed and used to get the optimal parameters. The approach was used in the analysis of oxygen bleached dissolving pulp samples in which main compounds identified were fatty acids, sterols, fatty alcohols, steroid hydrocarbons and ketones. These compounds were similar to those obtained using molecular solvent extraction method, which indicated the absence of chemical reaction between extractives and ionic liquid used.

     

Dynamic and Rheological Properties of Span 80 at Liquid–Liquid Interfaces

The adsorption characteristics of Span 80 at liquid/liquid interfaces were investigated. The equilibrium interfacial tension values were successfully fitted with a Langmuir isotherm resulting in the determination of a mean molecular area from 25 to 35 Å²/mol. The measured interfacial tension values and deduced adsorption parameters depend on the experimental technique used to obtain them, either Du Noüy ring or profile analysis tensiometry. Two possible explanations to such phenomenon are provided. Adsorption kinetics of Span 80 at liquid/liquid interfaces were studied, and it was concluded that the diffusion of Span 80 molecules from the bulk is the rate determining step of the adsorption. Finally the interfacial rheology properties were investigated and compared to the Lucassen–van den Tempel model. A good match was obtained when the isotherm parameters determined by profile analysis tensiometry were used.      

Determination of Aflatoxins in Plant-based Milk and Dairy Products by Dispersive Liquid–Liquid Microextraction and High-performance Liquid Chromatography with Fluorescence Detection

The consumption of plant-based milk has increased due to their nutritional attributes. However, these products may contain aflatoxins if contaminated raw materials were used, although little concern is present in international regulation regarding this topic. In this work, dispersive liquid–liquid microextraction (DLLME) was used for the determination of the most important aflatoxins (B₁, B₂, G₁, and G₂) in oat, rice, coconut, almond, and birdseed plant-based milk and milk-based products enriched with oats, almonds, and walnuts using high-performance liquid chromatography (HPLC) with photochemical derivatization and fluorescence detection. Calibrations in matrix were performed for all of the samples, obtaining satisfactory linearity, with correlation coefficients exceeding 0.994 for all of the aflatoxins. The precision in terms of repeatability and intermediate precision, expressed as the relative standard deviation, was lower than 9.7%, and recoveries ranged between 82 and 104%, fulfilling current legislation for the determination of aflatoxins. In addition, the limits of quantification were 0.5?µg?L^?1 for the aflatoxins, allowing the determination of these compounds below the maximum levels established by European Commission in these commodities. Finally, 23 commercial products were analyzed to characterize the presence of these toxins.     

Comparison of Aqueous and 1-Octanol Solubility as well as Liquid–Liquid Distribution of Acyclovir Derivatives and Their Complexes with Hydroxypropyl-β-Cyclodextrin

The aim of the presented work is the comparison of aqueous and 1-octanol solubilities of different acyclovir derivatives and their hydroxypropyl-β-cyclodextrin inclusion complexes. The solubility measurements were carried out at different temperatures over the range 25–45 °C using water, 1-octanol, water saturated with 1-octanol, 1-octanol saturated with water, buffered aqueous solutions (pH = 5.5 and 7.0) and buffered aqueous solutions containing cyclodextrin as solvents. The aqueous solubilities of the compounds are very low but may be enhanced by complexation with hydroxypropyl-β-cyclodextrin, especially if the acyclovir derivatives have aromatic groups which may be included in the cyclodextrin cavity. The values of 1-octanol–water partition coefficients of acyclovir derivatives, obtained using extraction experiments, showed a similar sequence as the solubility results in 1-octanol. Additionally, some molecular mechanics and molecular dynamic calculations were performed to determine optimized structures of acyclovir derivative complexes with β-cyclodextrin treated as a model.     

Magnetic Solid-Phase Extraction and Ionic Liquid Dispersive Liquid–Liquid Microextraction Coupled with High-Performance Liquid Chromatography for the Determination of Hexachlorophene in Cosmetics

An efficient, simple, and fast method based on ionic liquid dispersive liquid–liquid microextraction (IL-DLLME) followed by magnetic solid-phase extraction (MSPE) was developed as a new technique for extracting and purifying hexachlorophene (HCP) in cosmetics prior to high-performance liquid chromatography (HPLC) determination. In this method based on IL-DLLME and MSPE, 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) is used as the extraction solvent and Fe₃O₄ nanoparticles are used to remove hydrophobic additives in the cosmetics by physical adsorption. The main parameters affecting the efficiency of the IL-DLLME and MSPE of HCP were investigated and optimized. Under the optimum conditions, the method was linear in the range 0.5–40 µg mL^?1 with a correlation coefficient (R ²) of 0.9976 and had a detection limit of 0.14 µg mL^?1 at a signal-to-noise ratio (S/N) of 3. The recoveries of HCP in three cosmetic samples using the proposed method were in the range 74.5–97.7%, and the relative standard deviations (RSD, n = 5) were in the range 3.8–6.7%. The developed method was successfully applied to the determination of HCP in cosmetics.     

Liquid–Liquid Equilibrium of Water + 1-Propanol or 1-Butanol + Dibutyl Ether Ternary Systems: Measurements and Correlation at Three Temperatures

Liquid–liquid equilibrium (LLE) date for the ternary systems of {water?+?1-propanol?+?dibutyl ether (DBE)} and (water?+?1-butanol?+?DBE) were determined at T?=?(293.15, 303.15, 308.15) K under atmospheric pressure. Distribution coefficients and separation factors of 1-propanol in the mixtures were calculated and are discussed. The influence of temperature on the liquid phase regions was analyzed. In addition, the experimental values were correlated well with the modified and extended UNIQUAC models; the modified UNIQUAC model represents the data better than the extended UNIQUAC model.     

Liquid–Liquid Equilibrium Data for 1-Ethyl-3-methylimidazolium Acetate–Thiophene–Diesel Compound: Experiments and Correlations

Extraction of thiophene from cyclohexane, isooctane and toluene were performed using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]) at T=298.15 K. The liquid?Cliquid equilibrium (LLE) experiments were performed on three systems, namely: [EMIM][OAc]?Cthiophene?Ccyclohexane, [EMIM][OAc]?Cthiophene?Cisooctane and [EMIM][OAc]?Cthiophene?Ctoluene. The LLE data showed that [EMIM][OAc] has a higher selectivity at low concentration of thiophene and also showed that the hydrocarbon-rich phase is free of ionic liquid. This implies that there will be no cross contamination and the ionic liquid will be a non-pollutant in fuel after extraction. Further, the amount of hydrocarbon in the ionic-liquid-rich phase is very small. This implies that ionic liquid can be regenerated with negligible loss of fuel. LLE data was then correlated using the NRTL and UNIQUAC models. These showed root mean square deviation (RMSD) values of 0.82?% and 1.46?% for the isooctane system, 1.37?% and 1.57?% for the cyclohexane system and 1.39?% and 1.53?% for the toluene system.     

Liquid–Liquid Equilibrium of Water + 1-Butanol + Inorganic Salt Systems at 303.15, 313.15 and 323.15 K: Experiments and Correlation

Liquid–liquid equilibria (LLE) and tie-line data of systems containing 1-butanol, water and NaCl, Na₂SO₄, NH₄Cl or (NH₄)₂SO₄ were investigated at 303.15, 313.15 and 323.15 K and atmospheric pressure. The salt decreases mutual solubilities of these two solvents leading to a higher degree of phase separation at equilibrium. The effect is more pronounced at high salt concentration. Temperature in the studied range had a minor effect on LLE behavior of these mixtures. Experimental data were correlated using a modified extended UNIQUAC model. Satisfactory agreement between the calculated and measured mass fractions of the components was achieved.     

Synthesis of the reported structure of trans-africanan-1α-ol

A trisubstituted cyclopentane chiron has been prepared by dynamic kinetic reduction of a pulegone-derived β-keto ester. This chiron served as the starting material for the synthesis of the reported structure of the tricyclic sesquiterpene trans-africanan-1α-ol. The synthetic material was not congruent with the natural product.     

Determination of Cadmium in Human Serum and Blood Samples after Dispersive Liquid–Liquid Microextraction Using a Task-Specific Ionic Liquid

Task-specific ionic liquid dispersive liquid–liquid microextraction (TSIL-DLLME) is a simple and rapid preconcentration approach for the measurement of cadmium in serum and blood samples of human subjects. In this method a novel task-specific ionic liquid, trioctylmethyl ammonium thiosalicylate (TOMATS), which has dual characteristics as a chelating agent and extractive solvent, was investigated. TOMATS complexes with Cd due to the chelating effect of the ortho-positioned carboxylate relative to the thiol functionality. The assessment of the optimum values of variables including the pH, amount of reagents (TOMATS, diluents, Triton X114, and back extracting acid solution), temperature, and incubation time, which affect the recoveries of analyte by TSIL-DLLME method were studied. After enrichment experiments, acidic solution was used to back extract the metal ions from the ionic liquid rich phase and with determination by electrothermal atomic absorption spectrometry. Using the optimal experimental conditions, the limit of detection (3?s), precision (relative standard deviation), preconcentration, and enhancement factors of developed method for Cd were found to be 0.05?µg/L, greater than 5%, 62.5, and 52.8, respectively. To check the accuracy of the developed method, certified reference material of serum and blood were analyzed by the developed method, and the measured values of Cd were in good agreement with the certified values. The developed method was applied successfully to determine Cd in blood and serum samples of lymphatic cancer patients relative to healthy controls.     

Chiral Thietanes and Thiethane-1, 1-dioxides—Novel Building Blocks for Liquid Crystals -

The synthesis of chiral thietanes and chiral thiiranes from oxiranes under Mitsunobu conditions is described. One chiral thietane was oxidized to the corresponding thietane-1, 1-dioxide. ¹H-NMR, ¹³C-NMR, IR, MS data of the new compounds are given. In connection with a mesogenic group liquid crystal behavior could be observed for the thietane and the thiirane as well.     

Chemistry of the Positive and Negative Electrical Discharges Formed in Liquid Water and Above a Gas–Liquid Surface

The physical processes and chemical reactions that take place inside different temperature plasma zones in water are only partially understood. The present study uses the emission spectroscopy and hydrogen peroxide measurements as indicators of the processes that take place on the gas–liquid boundary and inside plasma. Based on the hydrogen peroxide measurements with negative and positive high-voltage polarities as a function of solution conductivity, it was concluded that the main difference between positive polarity plasma and negative polarity plasma lies in the active radical concentration inside plasma. Data suggested that in the positive polarity electrical discharge the hydrogen peroxide concentration depends on the solution pH, whereas in the negative polarity discharge, it depends on the solution conductivity. Also, only in the negative polarity discharge do some of the electrons that are emitted from the high voltage electrode diffuse into the bulk where they react with the solutes.