Effect of n-alkyl and sulfonyl groups on the wetting properties of comblike poly(oxyethylene)s and stick-slip behavior

The influence of side chain length and sulfonyl moiety on the molecular structures and wettability behavior of poly(oxyethylene)s with alkyl sulfonyl side chains (CH(3)-nSE, n = 1, 2, 3, 4, 5, 6, 8, 10), where n is the number of the carbon atom in the n-alkyl side group, was investigated. CH(3)-nSEs having shorter side chains (n < 5) do not have ordered structures, and their surfaces were found to be more polar than those of CH(3)-nSEs having longer side chains (n ≥ 5). The CH(3)-nSEs having longer side chains show double-layered lamellar structures (n ≥ 5) with well-aligned side chains and low surface energies in the range 21.2-25.8 mN/m. Interestingly, stick-slip behavior was observed only on the surfaces of CH(3)-3SE and CH(3)-4SE when water was used as the test liquid. The surface deformation at the three-phase line was generated from interactions between water and sulfonyl groups, and the optimum side chain lengths were believed to cause the stick-slip behavior.     

The photophysical properties and morphology of fluorene-alt-benzene based conjugated polymer

A series of fluorene-alt-benzene based conjugated main chain polymers chemically attached with alkyl side chains of different lengths on phenylene rings were designed and synthesized by a palladium catalyzed Suzuki coupling reaction. The UV-vis absorption and fluorescence spectra, thermal stability of spectral property, phase transition behavior and morphology of the synthesized polymers were investigated. With increasing the length of the alkyl side chain, the UV and fluorescence spectra exhibit an obvious blue shift compared with those of the unsubstituted polymer. The alkyl substitution improves the thermal spectral stability of the polymers due to the steric hindrance of the alkyl side chains, thus leading to efficient separation of the main chain backbones. The phase transition behavior is closely related to the length of the alkyl side chains attached on the phenylene rings. The annealed films of the polymers display characteristic nematic liquid crystalline texture. TEM observations indicate that solvent-cast thin deposits of all the polymers show typical fibrillar morphology.     

Synthesis and properties of poly(acrylamide)s containing both long chain alkyl groups and phosphatidylcholine analogues in the side chains

A series of new phospholipid analogous acrylamide monomers ( 4a–e ) containing long alkyl chains as hydrophobic groups and containing phosphatidylcholine analogues as hydrophilic group were synthesized in high yields. The homopolymerizations and copolymerization ( 4b with 4e ) were carried out in the presence of a radical initiator. The structures and thermal properties of these polymers were investigated by x-ray diffraction analysis, DSC, and polarizing microscopy measurements. It has been revealed that these homopolymers ( 5b, 5c , and 5d ) which bear saturated long-hydrocarbon chains in the side chains exhibited not only orderly stacked bilayer structures at room temperature but also clear liquid crystalline behavior within a wide temperature range. The viscosity behavior of all polymers was found similar to usual polyelectrolytes in porlar solvent. The polymers obtained were also characterized by ¹H-NMR, IR, and melting point, respectively. © 1996 John Wiley & Sons, Inc.     

全共轭聚噻吩类和聚硒吩类嵌段共聚物的凝聚态结构调控

嵌段共聚物可发生微相分离形成丰富的介观尺度上的相结构,而共轭聚合物是一类具有特殊的力学、导电性能或光电功能的半刚性链高分子.全共轭嵌段共聚物因其兼具两者的特性而备受瞩目.本文着重介绍了近年来课题组在基于全共轭聚(3-烷基噻吩)和聚(3-烷基硒吩)嵌段共聚物体系的研究进展,通过改变体系的分子结构包括主侧链结构、侧链的烷基长度及取代基团等以及对体系在溶液状态及薄膜状态进行后处理包括改变溶剂、热处理、溶剂蒸气处理等来调控体系的微相分离行为和结晶行为,实现对材料凝聚态结构的调控.在此基础上,以有机场效应晶体管和聚合物太阳能电池器件作为最终体现聚噻吩或聚硒吩类体系凝聚态结构与性能关系的平台,将获得的调控体系凝聚态结构的有效策略用于实现其半导体材料物理性能的提升.     

Functional polythiiranes 7: Surface activity of polythiiranes with PEO side chains

 Some comb-like polythiiranes with PEO side chains were prepared from the corresponding macromonomers. These new materials are amphiphiles and act as surfactants. Their surface tension and interfacial tension are measured and studied in this paper on account of their structures. The lowering of surface tension measured in polymers bearing methyl terminal group in PEO side chains, are in the same range as these observed with polymers of identical structures but different main chains. An increase of the hydrophobic units in the main chain, obtained in copolymers with methylthiirane does not significantly modified the surface tensions. Better lowering is afforded with structures bearing large alkyl groups as terminal group of PEO side chains. On the contrary, some of these macro-molecules with an optimized EO content largely lower the water/xylene surface tension. The main interest of these new materials is their very low cmc and the stabilization of L₁-type microemulsions. Received: 20 May 1997 Accepted: 25 November 1997     

烷基化程度对N-十八烷基化聚乙烯亚胺梳状高分子结构的影响

利用烷基化方法制备了烷基化取代程度(DS)介于47%～17.6%的N-十八烷基聚乙烯亚胺(PEI18C)梳状高分子.通过红外光谱、差示扫描量热法(DSC)、X-射线衍射和热失重分析等方法研究了PEI18C梳状高分子的结构、结晶行为和热稳定性,探讨了侧链烷基DS对C18侧链结晶及临界结晶行为的影响.结果发现,随DS的降低,PEI18C梳状高分子的结晶度由54.0%降至20.3%,可结晶碳原子数目由11.4个降到4.3个.受限于PEI骨架上C18烷基侧链的堆积排列模式并没有发生根本变化,仍以六方晶胞的形式进行排列.结果表明,侧链烷基DS或沿主链的侧链烷基分布密度对梳状高分子的结晶行为和临界结晶能力有明显的影响.从侧链结晶的角度,分析了侧链烷基取代度对梳状高分子结晶及热稳定性的影响.     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Interfacial self-organization of bolaamphiphiles bearing mesogenic groups: relationships between the molecular structures and their self-organized morphologies

This article discusses the relationship between the molecular structure of bolaamphiphiles bearing mesogenic groups and their interfacial self-organized morphology. On the basis of the molecular structures of bolaamphiphiles, we designed and synthesized a series of molecules with different hydrophobic alkyl chain lengths, hydrophilic headgroups, mesogenic groups, and connectors between the alkyl chains and the mesogenic group. Through investigating their interfacial self-organization behavior, some experiential rules are summarized: (1) An appropriate alkyl chain length is necessary to form stable surface micelles; (2) different categories of headgroups have a great effect on the interfacial self-organized morphology; (3) different types of mesogenic groups have little effect on the structure of the interfacial assembly when it is changed from biphenyl to azobenzene or stilbene; (4) the orientation of the ester linker between the mesogenic group and alkyl chain can greatly influence the interfacial self-organization behavior. It is anticipated that this line of research may be helpful for the molecular engineering of bolaamphiphiles to form tailor-made morphologies.     

Molecular level structures of poly(n-alkyl methacrylate)s with different side chain lengths at the polymer/air and polymer/water interfaces

Sum frequency generation (SFG) vibrational spectroscopy has been successfully applied to study molecular structures of several poly(n-alkyl methacrylate)s (PAMAs) with different side chain lengths at the PAMA/air and PAMA/water interfaces. We have observed that the ester side chains from all PAMAs always dominate the interface, but the orientation information of the methyl end group on the side chains varies, depending on the length of the side chain. The contributions from methylene groups on the side chains have been evaluated, and the surface structures have been related to the surface tension of these polymers. Different water restructuring behaviors have been observed for different PAMAs. This phenomenon and its reversibility are strongly dependent on the glass transition temperature of each polymer, which is influenced by the side chain length. Detailed data fitting and analysis has been discussed.     

Hyperbranched Polyether Polyols with Liquid Crystalline Properties

The attachment of mesogens as end groups to hyperbranched polyglycerol (degree of polymerization 22–45; see schematic representation, the rigid mesogens are shown as rods and the flexible alkyl chains as lines) leads to liquid crystalline polymers with narrow polydispersity, whose liquid crystalline behavior is induced by the mesogenic end groups only.     

Interfacial properties of free-standing poly(3-hexylthiophene) films

Using full atomistic classical molecular dynamics simulations, the interfacial properties of free-standing poly(3-hexylthiophene) (P3HT) films have been investigated. The orientations of different parts of the P3HT chain and the surface tensions of the films were calculated in a temperature range of 540 K-600 K. At the liquid/vacuum interface, the P3HT chain shows ordering by exposing hexyl groups at the interface, while the chain backbone lays flat with the thiophene ring preferentially tilt toward the surface. At the interface, the terminal methyl groups of hexyl side chains are in excess compared to the methylene groups or thiophene rings. The surface tension of P3HT in its melt state shows similar temperature dependence to that of polymers that have long alkyl side chains. The surface tension values are comparable to those polymers that expose methyl or methylene groups on the surface. The surface tension values determined for the melt state are lower than the experimental reported values for crystalline P3HT films, as expected.     

Wettability of biodegradable surfaces

The study of the interfacial characteristics of biodegradable polymers/copolymers is of importance from the point of view of both surface science and pharmaceutical/cosmetic applications. Films formed from biodegradable polymers allow systematic wettability studies on surfaces with a wide range of copolymer (chemical) compositions. The possibility of interchanging these drug carrier polymers, if their wetting characteristics are similar, could be beneficial to diverse applications. Low-rate dynamic contact angles on films (solvent cast on polar substrates, i.e. on silicon wafer) of poly(lactic acid), and its copolymers with poly(glycolic acid), (with four different copolymer ratios of 85/15, 75/25, 65/35 and 50/50) were measured by axisymmetric drop shape analysis-profile (ADSA-P) with four liquids: water, formamide, 2,2′-thiodiethanol and 3-pyridylcarbinol. The solid surface tensions, γ_sv, were calculated from the advancing contact angles, θ_A. The surface topography of the polymer films was investigated by atomic force microscopy (AFM). The surface composition of the polymer layers was analyzed by X-ray photoelectron spectroscopy (XPS). The advancing contact angles were found to be independent of the composition of the copolymers, while the receding angles, θ_R, did decrease with increasing ratio of the polar component [poly(glycolic acid)] in the copolymers. The solid surface tensions calculated from the advancing contact angles of the liquids for all homo- and copolymers were the same within the error limit; the mean value being γ_sv=35.6 ± 0.2 mJ/m². The surface roughness, which was obtained from AFM images, increased with increasing poly(glycolic acid) ratio, without affecting the advancing contact angles. The constancy of γ_sv is attributed to the effect of the surface activity of the nonpolar segments of the polymer chains, which oriented to form the outermost layer of the film. This was confirmed by XPS analysis. Received: 06 November 2000 Accepted: 09 May 2001     

Interplay between H‐Bonding and Alkyl‐Chain Ordering in Self‐Assembly of Monodendritic L‐Alanine Derivatives

This paper reports on the synthesis and self‐organizing properties of monodendrons consisting of L ‐alanine at the focal point and alkyl chains with different length at the periphery. The structures of thin films and monolayers are studied by temperature‐resolved grazing‐incidence X‐ray diffraction and scanning force microscopy. The interplay between H‐bonding and ordering of the alkyl chains results in a rich temperature‐dependent phase behavior. The monodendrons form H‐bonded stabilized clusters with the number of molecules depending on the length of the aliphatic chains and temperature. The clusters play the role of constitutive units in the subsequent self‐assembly. Short alkyl chains allow the material to form thermodynamically stable crystalline phases. The molecules with longer side groups exhibit additional transitions from the crystalline phase to thermotropic columnar hexagonal or columnar rectangular liquid‐crystalline phases. In monolayers deposited on highly ordered pyrolytic graphite, the materials show ordering similar to thin films. However, for the compound bearing hexadecyl chains the affinity of the alkyl groups to graphite dominates the self‐assembly and thereby allows epitaxial growth of a 2D lattice with flat‐on oriented molecules.     

Miscibility and segregated structures in mixed Langmuir monolayers

The phase behavior and morphology of segregated structures are considered for mixed Langmuir monolayers, which comprise a type of supramolecular polymer having a complex internal structure mixed with a long chain fatty acid. We fabricated two different series of mixed monolayers from a polyglutamate (PG) copolymer having 30% octadecyl ester side chains and 70% methyl ester side chains and fatty acids. These mixed monolayers deposited on a solid substrate were studied by pressure-area diagram measurements, X-ray analysis, and atomic force microscopy. Stearic acid (STA) and hexacosanoic acid (HCA) with alkyl chain lengths of 17 and 25 carbon atoms, respectively, were used as low molecular weight components. For the mixture PG:STA, where the length of the STA molecules is comparable to the length of the PG side chains, we observed the formation of partially miscible monolayers. These mixtures exhibit a nanometer scale domain morphology formed by the STA molecules dissolved in the outer shell of the PG monolayer. In contrast, for the PG:HCA mixture we observed a strong tendency for microphase separation and the formation of well-defined submicron segregated structures in the monolayers. Lateral compression of the mixed monolayers to a point close to the collapse pressure promotes microphase separation in both types of mixed monolayers with the formation of anisotropic surface morphology and oriented domains.     

N-烷基化聚对苯二甲酰对苯二胺梳状高分子中烷基侧链对刚性主链堆积行为的影响

基于聚对苯二甲酰对苯二胺(PPTA), 采用N-烷基化方法制备了系列PPTACns(烷基侧链碳原子数n=8, 10, 12, 14, 16, 18)刚性主链梳状高分子, 利用DSC, XRD和FTIR等方法研究了其主链堆积行为、 分子链构象及热性能等与烷基侧链长度及结晶特性之间的关系. XRD和DSC结果表明, 当烷基侧链碳原子数达到14时, 烷基侧链发生结晶. XRD结果显示, PPTACns具有层状结构, 烷基侧链长度对主链层间距影响显著. FTIR研究发现, 烷基侧链的聚集状态对PPTACns分子链的构象产生较大影响, 伴随着烷基侧链结晶的熔融, PPTACns的分子链构象发生显著改变. 烷基侧链处于熔融状态的PPTACns的ν_C=O和γ_C-H谱带峰位与烷基侧链不结晶的PPTACn接近.     

Role of each part of cyanobiphenyl-containing polymers in porous-film preparation by using the breath-figure method

ABSTRACT

The breath-figure method using the condensation of water droplets can easily fabricate regular porous films. Although the method is simple, the phenomenon itself requires the control of many parameters that change throughout the process. Therefore, we require a unified understanding of polymers for the fabrication of ordered porous films. In this study, to clarify the required molecular structures of polymers to form a regular porous structure, we systematically explored poly(methacrylate)s with cyanobiphenyl moieties connected by dodecyl groups in the side chain (P11CB); these could form a hexagonal ordered porous structure on the entire film surface. The comparison of P11CB and P11B, which is a P11CB without cyano groups, showed that the local polar groups in hydrophobic polymers promote the formation of ordered porous films. Furthermore, no holes were formed in films of P0CB which is a P11CB without alkyl spacers due to its hydrophilicity. Long alkyl chains resulted in changed hydrophilic polymers to hydrophobic polymers. The introduction of long alkyl chains as a spacer between the biphenyl moiety and polymer backbone is preferred in the cases of particularly few amounts of biphenyl groups in the polymer. The biphenyl groups showed the ability to improve film formability.     

Investigating the impact of regiochemistry in ester functionalized polyfurans

In this study, the impact of ester side group regiochemistry on electronic and conformational properties of regioregular polyfurans was explored. A derivative with alternating head-to-head and tail-to-tail orientation of the side groups was synthesized and compared with its head-to-tail analogue, and these were benchmarked against the related regioregular poly(3-hexylfurans). The study revealed that alkyl ester side groups in a head-to-head orientation will create significant steric strain as compared with linear alkyl chains with identical regiochemistry. Though the head-to-head ester side groups lead to twisting along the polymer backbone, they also produce a protective effect against photodegradation in comparison with a poly(3-hexylfuran). Altogether, the work highlights how side groups can impact conformational properties and stability of polyfurans.     

Surface properties of poly(N-monoalkylmaleamic acid-alt-styrene) sodium salts: effect of the molecular weight and the side chain length

The surface properties of poly(N-monoalkylmaleamic acid-alt-styrene) sodium salts are studied as a function of the molecular weight and the size of the linear alkyl lateral chain of the polyelectrolyte. The experimental results are well described by the Gibbs-Szyszkowski treatment. Both the surface tension behavior and the standard free energy of adsorption depend on the polyelectrolyte side chain and on the average molecular weight, M(w). An M(w)-dependent contribution to the free energy of adsorption ranging from -1.21 to -1.05 kJ for mole of methylene groups is found. The area covered by monomer units increases with M(w) and the sizes of side chains are similar to those reported in small-molecule systems. The nature of the functional group amide in the side chain has practically no effect on the surface properties as compared with the ester group in this kind of polyelectrolytes.     

Synthesis and characterization of new biodegradable thermosensitive polyphosphazenes with lactic acid ester and methoxyethoxyethoxy side groups

<正>Two novel biodegradable thermosensitive polyphosphazenes with lactic acid ester and methoxyethoxyethoxy side groups were synthesized via the macromolecular substitution reactions of poly(dichlorophosphazene) with the sodium salt of lactic acid ester and sodium methoxyethoxyethoxide.Their structures were confirmed by ~(31)p NMR,~1H NMR,~(13)C NMR,IR,DSC,and elemental analysis.The lower critical solution temperature(LCST) behavior in water and in vitro degradation property of the polymers was investigated.The results indicated that two polymers showed LCST phase transition over a range of concentrations from 0.13 to 15 wt%and pH-sensitive degradation properties.     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011