Laser-accelerated protons with energy-dependent beam direction

The spatial distribution of protons, accelerated by intense femtosecond laser pulses interacting with thin target foils under oblique irradiation are investigated. Under certain conditions, the proton beams are directed away from the target normal. This deviation is towards the laser forward direction, with an angle that increases with the level and duration of the amplified spontaneous emission pedestal before the main laser pulse. In addition, for a given laser pulse, this beam deviation increases with proton energy. The observations are discussed in terms of different electron acceleration mechanisms and target normal sheath acceleration, in combination with a laser-controllable shock wave locally deforming the target rear surface.     

Eight MeV per charge state from 300 ps laser ion acceleration by using micrometric foils

Proton acceleration using high-intensity laser pulses, at 10¹⁶ W/cm² was studied irradiating different types of thin metal and plastic targets having 1-micron thickness. The maximization of the proton energy process was investigated optimizing the laser parameters, the irradiation conditions and the target properties. Employing 600–700 J laser pulse energy, a focalization inducing self-focusing effects and using targets with optimized thickness, it was possible to accelerate protons up to energies of above 8 MeV. The time-of-flight diagnostics has allowed to monitor the plasma properties and to control the ion acceleration process.     

利用激光离焦的方法优化超强激光驱动的质子加速

在中国科学院物理研究所"极光Ⅱ 号"飞秒激光装置上,对激光与薄膜靶相互作用产生的靶后质子束特性进行了实验研究.结果发现,在主脉冲前存在较强的飞秒预脉冲的情况下,通过适当地对激光束散焦,可以使质子束的转换效率提高3 个数量级,并同时改善质子束的准直性.分析表明,激光散焦的方法可以有效地抑制预脉冲的流体力学效应对质子加速的负面影响,从而提高质子的转换效率.此外,粒子模拟还发现,散焦量增大时可以产生更多的中低能超热电子,这也有利于建立高质量的质子加速电场. 关键词： 超短脉冲激光与等离子体相互作用 质子加速 转换效率     

Intense laser-driven energetic proton beams from solid density targets

The effects of target density on proton acceleration driven by an intense sub-ps laser pulse are investigated using two-dimensional hybrid particle-in-cell simulations. Results show that at higher density the target-normal-sheath acceleration (TNSA) is more effective than shock acceleration for protons from a plastic target. Furthermore a lower-density target is favorable to higher energy of the TNSA protons. Moreover, the longitudinal electric fields at the target surfaces may reveal typical inhomogeneous structures for a long acceleration time. The conversion efficiency of laser energy into particle (electron, proton, and C(+) ion) energy is found to increase with decreasing target density.     

Six MeV proton acceleration from plasma generated by high-intensity laser using advanced thin polyethylene targets

Proton acceleration can be induced by non-equilibrium plasma developed by high-intensity laser pulses, at 10¹⁶ W/cm², irradiating different types of thin polyethylene targets. The process of proton acceleration and directive yield emission was investigated, optimizing the laser parameters, the irradiation conditions, and the target properties. The use of 600 J pulse energy, a laser focalization inducing self-focusing effects and advanced targets with embedded nanoparticles and optimal thicknesses, has permitted to accelerate forward protons up to the energies of about 6 MeV and amount of the order of 10¹⁵ H⁺/pulse. High proton energy is obtained using thin foils enriched with gold nanoparticles, whereas high proton yield is obtained using targets with a thickness of about 10 μm. The plasma diagnostics using SiC semiconductor detectors in time-of-flight configuration was fundamental to monitor the optimal conditions to improve the plasma processes concerning the ion acceleration and the X-ray and relativistic electron emission.     

飞秒激光中高能质子的产生与加速的研究

为了探索飞秒激光与固体靶相互作用中高能质子的产生和加速机制,在超短超强激光装置“SILEX-I”上进行了飞秒激光与平面固体薄膜Cu靶的相互作用中高能质子空间分布、能谱和产额的实验研究。实验采用固体核径迹探测器CR39和Thomson离子谱仪相结合的方式,在固体靶背表面法线方向测量了质子空间分布、能谱和产额。实验结果表明：质子沿着靶背法线方向发射,质子空间分布呈圆环状,存在一定的立体角;质子在一定能量处出现截断;截断能量的大小与靶厚度有关。经分析,高能离子的产生和加速是多种作用机制共同作用的结果,其中静电场中的TNSA加速机制则占主导地位。     

飞秒激光中高能质子的产生与加速的研究

为了探索飞秒激光与固体靶相互作用中高能质子的产生和加速机制,在超短超强激光装置“SILEX-I”上进行了飞秒激光与平面固体薄膜Cu靶的相互作用中高能质子空间分布、能谱和产额的实验研究。实验采用固体核径迹探测器CR39和Thomson离子谱仪相结合的方式,在固体靶背表面法线方向测量了质子空间分布、能谱和产额。实验结果表明：质子沿着靶背法线方向发射,质子空间分布呈圆环状,存在一定的立体角;质子在一定能量处出现截断;截断能量的大小与靶厚度有关。经分析,高能离子的产生和加速是多种作用机制共同作用的结果,其中静电场中的TNSA加速机制则占主导地位。     

Fast-ion energy-flux enhancement from ultrathin foils irradiated by intense and high-contrast short laser pulses

Recent significant improvements of the contrast ratio of chirped pulse amplified pulses allows us to extend the applicability domain of laser accelerated protons to very thin targets. In this framework, we propose an analytical model particularly suitable to reproducing ion laser acceleration experiments using high intensity and ultrahigh contrast pulses. The model is based on a self-consistent solution of the Poisson equation using an adiabatic approximation for laser generated fast electrons which allows one to find the target thickness maximizing the maximum proton (and ion) energies and population as a function of the laser parameters. Model furnished values show a good agreement with experimental data and 2D particle-in-cell simulation results.     

Brunel-dominated proton acceleration with a few-cycle laser pulse

Experimental measurements of backward accelerated protons are presented. The beam is produced when an ultrashort (5 fs) laser pulse, delivered by a kHz laser system, with a high temporal contrast (10(8)), interacts with a thick solid target. Under these conditions, proton cutoff energy dependence with laser parameters, such as pulse energy, polarization (from p to s), and pulse duration (from 5 to 500 fs), is studied. Theoretical model and two-dimensional particle-in-cell simulations, in good agreement with a large set of experimental results, indicate that proton acceleration is directly driven by Brunel electrons, in contrast to conventional target normal sheath acceleration that relies on electron thermal pressure.     

超短激光与金薄膜靶相互作用产生的质子能谱

在能量11 mJ、波长744 nm、脉宽120 fs、功率密度61016 W/cm2的超短脉冲装置上,开展了超短脉冲激光与2.1 m和5.0 m金薄膜靶相互作用产生质子束的实验研究。利用Thomson谱仪测量了产生的质子能谱,发现利用2.1 m金薄膜靶时,质子能谱由于质子源数量不足而在74 keV附近出现单能峰,5.0 m的金薄膜靶产生的质子计数和能谱均比2.1 m的金薄膜靶产生的低,主要原因是超热电子穿过薄膜靶时出现的能量损失和几何倾斜降低了电子回流所致。     

飞秒激光与薄膜Cu靶作用时质子能谱实验

采用飞秒激光辐照固体薄膜Cu靶的方式对质子束的产生及质子束能谱开展了实验研究。在SILEX-Ⅰ飞秒激光装置上,保持脉宽为30 fs不变,测量了不同激光能量和功率密度下辐照7 m Cu靶时的质子能谱。研究结果表明:质子沿着靶背法线方向发射,质子在一定能量处出现截断;随着质子束能量的增加,质子束流减小;轰击厚为7 m的Cu靶时,激光能量越大则质子束流越强;随着激光功率密度的增加,质子截止能也随之增加。     

Proton shock acceleration in laser-plasma interactions

The formation of strong, high Mach number (2-3), electrostatic shocks by laser pulses incident on overdense plasma slabs is observed in one- and two-dimensional particle-in-cell simulations, for a wide range of intensities, pulse durations, target thicknesses, and densities. The shocks propagate undisturbed across the plasma, accelerating the ions (protons). For a dimensionless field strength parameter a(0)=16 (Ilambda(2) approximately 3 x 10(20) W cm(-2) microm(2), where I is the intensity and lambda the wavelength), and target thicknesses of a few microns, the shock is responsible for the highest energy protons. A plateau in the ion spectrum provides a direct signature for shock acceleration.     

用20—1020 keV单能质子刻度CR-39固体核径迹探测器

用北京师范大学2×1.7MV串列加速器和400 kV高压倍加器产生的20—1020 keV单能质子束对CR-39固体核径迹探测器进行了刻度.为了保证质子的单能性和固体核径迹探测器上径迹密度不能超过10⁶/cm²的要求,对两台加速器分别采用了不同方法控制质子辐照数量.在串列加速器上采用了狭缝加转盘的方法,在高压倍加器上采用了100 ns单次高压脉冲扫描束流的方法,既保持了质子的单色性,又达到了质子注量小于10⁶/cm²的 关键词： 单能质子 固体核径迹探测器 CR-39     

Enhanced betatron radiation by a modulating laser pulse in laser wakefield acceleration

We propose a new idea to enhance and control the betatron radiation by using a modulating laser pulse in laser wakefield acceleration. In this scheme, a high-power laser pulse is used for self-trapping and acceleration of the plasma electrons and the accelerated electron beam is modulated by a separately-propagating laser pulse for large amplitude betatron oscillations and microbunching. In this way, the relatively low power modulating laser pulse can enhance the X-ray photon flux and energy significantly. We performed two-dimensional particle-in-cell simulations to demonstrate the idea and the results show that a sub-TW laser pulse is enough for electron beam modulation and it can generate easily-controllable fs X-ray pulses with a wide range of photon energies from soft X-rays to hard X-rays.     

Stochastic heating and acceleration of electrons in colliding laser fields in plasma

We propose a mechanism that leads to efficient acceleration of electrons in plasma by two counterpropagating laser pulses. It is triggered by stochastic motion of electrons when the laser fields exceed some threshold amplitudes, as found in single-electron dynamics. It is further confirmed in particle-in-cell simulations. In vacuum or tenuous plasma, electron acceleration in the case with two colliding laser pulses can be much more efficient than with one laser pulse only. In plasma at moderate densities, such as a few percent of the critical density, the amplitude of the Raman-backscattered wave is high enough to serve as the second counterpropagating pulse to trigger the electron stochastic motion. As a result, even with one intense laser pulse only, electrons can be heated up to a temperature much higher than the corresponding laser ponderomotive potential.     

Phonon–particle coupling effects in odd–even double mass differences of magic nuclei

It has been proposed to use the formation of a magnetized plasma of laser-accelerated ions and electrons at the irradiation of the curved surface of the inner cavity of the target by a petawatt laser pulse to initiate a neutronless nuclear reaction of protons with boron nuclei. The possibility of an additional increase in the intensity of the reaction owing to the compression of the plasma at the irradiation of the outer surface of the target by a second terawatt laser pulse synchronized in time with the plasma-forming pulse has been discussed. The parameters of laser pulses and a target have been determined at which the ignition of a pB plasma occurs; i.e., the energy released in reactions is equal to the energy of the plasma.     

Ion acceleration at the front and rear surfaces of thin foils with high-intensity 40-fs laser pulses

Ion acceleration from the front and rear sides of a foil target is observed by measurements of the ions’ spectral and spatial emission characteristics when irradiating the targets with ultrashort (40-fs) high-intensity laser pulses. The experimental results show that the origin of accelerated ions, from both the front and rear surfaces of the target, strongly depend on the laser energy absorption mechanism. In particular, laser pulse parameters such as pulse duration and contrast are crucial and determine the entire acceleration scenario. Thus, the experimental outcome can be controlled by selection of the irradiation conditions. The text was submitted by the authors in English.     

Successive particle acceleration by use of two tightly focused ultra-short intense laser pulses

We suggest a scheme of electron acceleration by use of two tightly focused ultra-short intense laser pulses at a 100TW level. Electrons obtain a preliminary acceleration with a small angular spread by the longitudinal ponderomotive force of the first pulse. They are then injected and further accelerated to hundreds of MeV by the second laser pulse.     

短脉冲强激光打靶产生的质子角分布实验研究

 采用短脉冲强激光辐照固体双层薄靶的方式对质子束的产生及质子束角分布开展了实验研究。在SILEX-Ⅰ短脉冲激光装置上利用脉宽为30 fs的强激光辐照背面镀有CH膜的金膜靶,在距离靶背3.3 cm处采用CR39记录靶背出射的质子角分布。通过分析靶背出射质子的角分布,研究了激光功率密度和对比度对质子加速机制的影响。研究结果表明:占主导地位的质子产生和加速机制对激光预脉冲比较敏感。激光预脉冲较弱时,靶背壳电场加速机制占主导地位;当激光预脉冲较强时,靶前加速机制占主导地位。此外,还对导致质子环形分布的磁场大小进行了估算。     

激光加速高能质子实验研究进展及新加速方案

利用超强激光与等离子体相互作用来加速高能离子是激光等离子体物理及加速器物理领域的研究热点.经过了近20年的发展,激光离子加速已取得丰硕成果,催生了一批新的应用.本文概述了国内外激光离子加速所取得的标志性实验研究进展,围绕高能质子的产生这一关键问题进行了深入的探讨,介绍了近几年来发展的有潜力的新加速方案.