Electronic structure study of seven-coordinate first-row transition metal complexes derived from 1,10-diaza-15-crown-5: a successful marriage of theory with experiment

A detailed study of the electronic structure of seven-coordinate Mn(II), Co(II), and Ni(II) complexes with the lariat ether N,N'-bis(2-aminobenzyl)-1,10-diaza-15-crown-5 (L(1)) is presented. These complexes represent new examples of structurally characterized seven-coordinate (pentagonal bipyramidal) complexes for the Mn(II), Co(II), and Ni(II) ions. The X-ray crystal structures of the Mn(II) and Co(II) complexes show C(2) symmetries for the [M(L(1))](2+) cations, whereas the structures of the Ni(II) complexes show a more distorted coordination environment. The magnetic properties of the Mn(II) complex display a characteristic Curie law, whereas those of the Co(II) and Ni(II) ions show the occurrence of zero-field splitting of the S = 3/2 and 1 ground states, respectively. Geometry optimizations of the [M(L(1))](2+) systems (M = Mn, Co, or Ni) at the DFT (B3LYP) level of theory provide theoretical structures in good agreement with the experimental data. Electronic structure calculations predict a similar ordering of the metal-based beta spin frontier MO for the Mn(II) and Co(II) complexes. This particular ordering of the frontier MO leads to a pseudodegenerate ground state for the d(8) Ni(II) ion. The distortion of the C(2) symmetry in [Ni(L(1))](2+) is consistent with a Jahn-Teller effect that removes this pseudodegeneracy. Our electronic structure calculations predict that the binding strength of L(1) should follow the trend Co(II) approximately Mn(II) > Ni(II), in agreement with experimental data obtained from spectrophotometric titrations.     

Lead(II) complexes with macrocyclic receptors derived from 4,13-diaza-18-crown-6

The complexation properties of three related macrocycles derived from 4,13-diaza-18-crown-6 toward lead(II) are reported. The flexible macrocycle N,N'-bis(2-aminobenzyl)-4,13-diaza-18-crown-6 (L(2)) forms stable complexes with this metal ion in the presence of different counterions (perchlorate and thiocyanate). The X-ray crystal structure of [PbL(2)](SCN)(2) indicates that, in the solid state, the lead(II) ion is eight-coordinated and fits quite well into the crown hole favoring an anti arrangement of the organic receptor, which generates a very infrequent cubic coordination polyhedron around the Pb(II) ion. In solution both complexes are fluxional and the nature of the counterion seems to affect the dynamic behavior. Ligand L(3), N,N'-bis[(2-salicylaldimino)benzyl]-4,13-diaza-18-crown-6, derives from L(2) by condensation of salicylaldehyde with the amine group of each side arm. It can be deprotonated to yield cationic complexes of formula [Pb(L(3)-H)](+) where the metal ion lies asymmetrically on the cavity of the ligand, being seven-coordinated and pushed out from the crown hole, the bibracchial lariat ether presents a syn arrangement, and one of the arms remains uncoordinated. The lead(II) ion also lies asymmetrically on the cavity of the third macrocycle (L(7)), a lateral macrobicycle incorporating a phenolyl Schiff-base spacer. Spectrophotometric titrations of L(2) and (L(3)-2H)(2)(-) with lead(II) perchlorate in acetonitrile gave values of log K[PbL(2)] = 7.7(5) and log K[Pb(L(3)-2H)] = 7.2(3), demonstrating that the stability of the lead(II) complexes with these two ligands is very similar.     

Structural trends in first-row transition-metal bis(benzimidazole) complexes

Dimethyl-substituted bis(benzimidazole) (Me2BBZ) is a novel macrocyclic ligand that possesses an intrinsic nonplanarity. To examine how metal-ion binding affects the magnitude of this nonplanarity, we have determined the structures of a periodic series of Me2BBZ complexes bound to Mn(II), Fe(II), Co(II), Ni(II), and Cu(II). These studies demonstrate that the extent of ligand ruffling and metal doming is indeed influenced by the nature of the metal. Concomitant with the periodic decrease of the ionic radii of the encapsulated divalent metal ion, a decrease in the magnitude of both the ligand nonplanarity and the metal out-of-the-plane distance is observed. For the metal out-of-the-plane distance, this correlation persists until the metal finally moves into the mean ligand plane. For the nonplanar distortion, the extent of the nonplanarity decreases to a limiting value that is intrinsic to the Me2BBZ ligand due to steric factors. These observations indicate that the relative sizes of the metal ion and the Me2BBZ ligand cavity have profound effects on the structural features of the metal-ligand complex.     

Polymers containing crown ethers: Polyureas from diisocyanates and 1,10-diaza-18-crown-6

A new class of polyureas are reported which contain a crown ether analog in the backbone. Synthesis involves condensation of 1,10-diaza-4,7,13,16-tetraoxacyclooctadecane with either 2,4-toluene diisocyanate or hexamethylene diisocyanate in dichloromethane. The former gives tough, flexible polymers and the latter tacky, hygroscopic products. The infrared (IR) and proton nuclear magnetic resonance (NMR) spectra of these materials are given along with those of the polyurea from piperazine and hexamethylene diisocyanate. The carbon NMR chemical shifts and spin-lattice relaxation times are also reported. Comparison is made with monomer, other crown ethers, polyoxyethylene, and a model compound prepared from the diaza monomer and phenylisocyanate. The T₁ values indicate a greater degree of backbone and macrocycle flexibility for the hexamethylene-containing polyurea than for the toluene analog.     

Conductance study of some transition and heavy metal complexes with 1,10-diaza-18-crown-6 in binary acetonitrile-dimethylsulfoxide mixtures

A conductance study of the interaction between cobalt, nickel, copper, zinc, cadmium, and lead ions with 1,10-diaza-18-crown-6 in different acetonitrile-dimethylsulfoxide mixtures has been carried out at various temperatures. The formation constants of the resulting 11 complexes were determined from the molar conductance-mole ratio data and found to vary in the order Zn²⁺2+2+2+2+2+. The enthalpy and entropy of complexation reactions were determined from the temperature dependence of the formation constants. A linear relationship is observed between the log K_f of different complexes and mole fraction of acetonitrile in the solvent mixtures. The TS vs. H plot of all thermodynamic data obtained shows a fairly good linear correlation indicating the existence of an enthalpy-entropy compensation in the complexation reactions.     

单核第一过渡周期金属水氧化催化剂（英文）

由于传统化石能源的不可再生性,其储量日益减少.同时,传统化石能源的使用对环境产生了巨大影响,给人类社会带来了一系列问题,包括温室效应、酸雨等.因此,进入二十一世纪以后,人类面临着日益严峻的能源危机和环境问题,寻找清洁、高效的替代能源已经迫在眉睫.太阳能被认为是一种洁净的可再生能源.自然界通过光合作用将太阳能转化为化学能,在这一过程中,水被氧化产生氧气,同时释放出的电子和质子通过和二氧化碳作用生成碳水化合物.为了模拟这一过程,人工光合作用可以直接将电子和质子结合形成氢气.由此生成的氢气也被认为是洁净的可再生能源,因为在其燃烧过程中只产生水.因此,通过光致水分解析氢析氧的人工光合作用受到了越来越广泛的重视.水分解可以分为两个独立的半反应,即水的氧化析氧和水的还原析氢.水的氧化无论在热力学还是动力学方面,都存在着非常大的阻碍.在热力学上,两分子的水氧化生成一分子氧气需要提供很多能量(ΔE=1.23 V vs NHE).在动力学上,由于涉及到四个氢原子和两个氧原子的重组,并且涉及到氧氧键形成并释放出一分子氧气,因此水氧化是一个非常缓慢的过程.在自然界,水的氧化主要发生在光合作用中,在绿色植物的叶绿体中完成.通过对光合作用的研究,科学家们发现氧气的产生由光系统Ⅱ(PSII)中的释氧中心来完成.释氧中心是一个钙锰簇合物,由四个锰和一个钙组成(Mn_4CaO_x).自然界水分解产生氧气的过程给了我们很大启示,对设计和研究高效稳定的水氧化催化剂具有一定的指导意义.目前水氧化催化剂主要有两大类.第一类是基于材料的水氧化催化剂.该类催化剂的催化效率高,过电势小,但是对水氧化催化过程的机理缺乏深入研究.第二类是基于金属配合物的分子催化剂.相比基于材料的催化剂,分子催化剂具有以下特点:(1)分子催化剂的结构可以通过实验手段表征清楚;(2)可以结合光谱对水氧化的机理进行深入研究,可以对催化过程中间体进行表征;(3)催化剂的结构可以从分子水平上进行修饰,因此可以更好地研究催化效率与结构之间的关系,为设计高效、稳定的催化剂提供必要信息;(4)比较容易组装成分子器件从而应用到实际的水氧化装置中;(5)通过实验与理论的结合,对氧氧成键提出新的认识与理解.近几年来,一些单核的金属配合物逐渐被发现可以高效、稳定地催化水氧化.研究表明,一些基于钌和铱的催化剂具有良好的催化活性,但由于金属钌和铱储量少、价格昂贵等因素,限制了该类催化剂的大量使用.由于第一过渡系金属元素具有储量丰富、安全无毒、廉价易得等优势,第一过渡周期金属化合物逐渐成为科学家们研究的热点.近几年来,基于第一过渡系金属的水氧化催化剂已经有大量报道.本文主要总结了近几年来基于第一过渡系金属的单核水氧化分子催化剂.通过对催化机理进行深入的讨论,特别是对氧氧成键的总结,本文将对设计合成结构新颖、具有高催化效率和良好稳定性的水氧化分子催化剂提供理论依据.     

Crystal Structure of Triaqua(1,10-diaza-18-crown-6)chlorobarium Chloride

The crystal structure of triaqua(1,10-diaza-18-crown-6)chlorobarium chloride [Ba(DA18C6)Cl(H₂O)₃]⁺Cl^–(I) is studied by X-ray diffraction analysis: space group Pnma, a= 14.912, b= 13.590, c= 10.456 Å, Z= 4. Structure Iis solved by the direct method and refined by the full-matrix least-squares method in the anisotropic approximation: R= 0.079 for all 3194 measured independent reflections (CAD-4 diffractometer, MoK ). Crystal Iexists as complex guest–host cations and Cl^–anions connected via interionic hydrogen bonds. The cations and anions are located in the msymmetry plane. The Ba²⁺ion (coordination number 10) is in the cavity of the DA18C6 macrocycle and is coordinated by its six heteroatoms (2N + 4O) and also by the Cl^–anion and two O atoms of two water molecules from one side of the macrocycle and by the O atom of the third water molecule from another side. The DA18C6 ligand in Ihas the conformation of a crown with an approximate D _3d symmetry.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

Preparation of N,N′-di pivot lariat 1,4-diaza-15-crown-5 and 18-crown-6 macrocycles

Twelve diaza-15-crown-5 and 18-crown-6 macrocycles containing different side arms on the nitrogen atoms have been prepared. These diaza-N,N'-di pivot lariat crown ethers were prepared either from N,N'-bishydroxyethyl-1,4-diaza-15-crown-5 or 18-crown-6 ligands or from the corresponding unsubstituted diaza-crowns.     

Stabilities in water and transfer activity coefficients from water to nonaqueous solvents of 15-crown-5 and 16-crown-5-metal ion complexes

Stability constants of 1 : 1 16-crown-5 (16C5)-metal ion complexes were determined in water at 25°C by conductometry and potentiometry with ion-selective electrodes. The selectivity sequences of 16C5 in water for univalent and bivalent metal ions are Ag⁺ > Na⁺ Tl⁺ > K⁺ and Sr²⁺ > Ba²⁺ Pb²⁺, respectively. The stability of a given 16C5-metal ion complex in water is much lower than might be expected on the basis of the solvation power (i.e. relative solubility of the metal ion) of water for the metal ion. The same tendency is observed for the cases of 15-crown-5 (15C5) -metal ion complexes. Transfer activity coefficients () of 15C5 and 16C5 for tetradecane (TD)/water, TD/methanol, TD/acetonitrile, and propylene carbonate/water systems were determined at 25°C. From these data, contributions of a methylene group and an ether oxygen atom to the log value of a crown ether were then obtained. The values from water to acetonitrile, propylene carbonate, and methanol of 15C5- and 16C5-univalent metal ion complexes were calculated, s, M⁺, and L being a solvent, a univalent metal ion, and a crown ether, respectively. The log value is greater than the corresponding log value. The log values are negative. This indicates that, although the M^- ions are more soluble in water than in the nonaqueous solvents, when the crown ether forms a complex with the M⁺ ion, the complex becomes more soluble in the nonaqueous solvents than in water, compared with the free crown ether. It was concluded from this finding that the unexpectedly low stability of the crown ether-M⁺ complex in water is attributed to strong hydrogen bonding between ether oxygen atoms of the free crown ether and water.     

Response of a benzoxainone derivative linked to monoaza-15-crown-5 with divalent heavy metals

The response of a monoaza-15-crown-5 with an optically active aminobenzoxazinone moiety to divalent cations was investigated. The crown ether was found to undergo a strong emission shift to the blue when complexed with specific divalent metals that have ionic diameters between 1.9-2.4 A. Consequently the photoactive macrocycle is responsive to Mg(2+), Ca(2+), Ba(2+), Sr(2+), Cd(2+), and particularly responsive to Hg(2+)and Pb(2+). Macrocycle emission spectra are shown to be a function of cation concentration. Alkaline metal cations and smaller transition metals ions such as Ni(2+), Co(2+)and Zn(2+)do not cause significant changes in the macrocycle emission spectra. Emission, absorption, and complex stability constants are determined. Mechanisms of cation selectivity and spectral emission shifts are discussed. Challenges involving immobilization of the macrocycle while preserving its spectral response to cations are explored.     

Pyridazine- versus pyridine-based tridentate ligands in first-row transition metal complexes

A series of first-row transition metal complexes with the unsymmetrically disubstituted pyridazine ligand picolinaldehyde (6-chloro-3-pyridazinyl)hydrazone (PIPYH), featuring an easily abstractable proton in the backbone, was prepared. Ligand design was inspired by literature-known picolinaldehyde 2-pyridylhydrazone (PAPYH). Reaction of PIPYH with divalent nickel, copper, and zinc nitrates in ethanol led to complexes of the type [Cu(II)(PIPYH)(NO(3))(2)] (1) or [M(PIPYH)(2)](NO(3))(2) [M = Ni(II) (2) or Zn(II) (3)]. Complex synthesis in the presence of triethylamine yielded fully- or semideprotonated complexes [Cu(II)(PIPY)(NO(3))] (4), [Ni(II)(PIPYH)(PIPY)](NO(3)) (5), and [Zn(II)(PIPY)(2)] (6), respectively. Cobalt(II) nitrate is quantitatively oxidized under the reaction conditions to [Co(III)(PIPY)(2)](NO(3)) (7) in both neutral and basic media. X-ray diffraction analyses reveal a penta- (1) or hexa-coordinated (2, 3, and 7) metal center surrounded by one or two tridentate ligands and, eventually, κ-O,O' nitrate ions. The solid-state stoichiometry was confirmed by electron impact (EI) and electrospray ionization (ESI) mass spectrometry. The diamagnetic complexes 5 and 6 were subjected to (1)H NMR spectroscopy, suggesting that the ligand to metal ratio remains constant in solution. Electronic properties were analyzed by means of cyclic voltammetry and, in case of copper complexes 1 and 4, also by electron paramagnetic resonance (EPR) spectroscopy, showing increased symmetry upon deprotonation for the latter, which is in accordance with the proposed stoichiometry [Cu(II)(PIPY)(NO(3))]. Protic behavior of the nickel complexes 2 and 5 was investigated by UV/vis spectroscopy, revealing high π-backbonding ability of the PIPYH ligand resulting in an unexpected low acidity of the hydrazone proton in nickel complex 2.     

Ligand redox activity and mixed valency in first-row transition-metal complexes containing tetrachlorocatecholate and radical tetrachlorosemiquinonate ligands

Ligand noninnocence occurs for complexes composed of redox-active ligands and metals, with frontier orbitals of similar energy. Usually methods of analysis can be used to define the charge distribution, and cases where the metal oxidation state and ligand charge are unclear are unusual. Ligands derived from o-benzoquinones can bond with metals as radical semiquinonates (SQ(?-)) or as catecholates (Cat(2-)). Spectroscopic, magnetic, and structural properties can be used to assess the metal and ligand charges. With the redox activity at both the metal and ligands, reversible multicomponent redox series can be observed using electrochemical methods. Steps in the series may occur at either the ligand or metal, and ligand substituent effects can be used to tune the range of ligand-based redox steps. Complexes that appear as intermediates in a ligand-based redox series may contain both SQ and Cat ligands "bridged" by the metal as mixed-valence complexes. Properties reflect the strength of metal-mediated interligand electronic coupling in the same way that ligand-bridged bimetallics conform to the Robin and Day classification scheme. In this review, we will focus specifically on complexes of first-row transition-metal ions coordinated with three ligands derived from tetrachloro-1,2-benzoquinone (Cl(4)BQ). The redox activity of this ligand overlaps with the potentials of common metal oxidation states, providing examples of metal- and ligand-based redox activity, in some cases, within a single redox series. The strength of the interligand electronic coupling is important in defining the separation between ligand-based couples of a redox series. The complex of ferric iron will be described as an example where coupling is weak, and the steps associated with the Fe(III)(Cl(4)SQ)(3)/[Fe(III)(Cl(4)Cat)(3)](3-) redox series are observed over a narrow range in electrochemical potential.     

Crystal structure of N,N′-bis(phenylaminocarbonyl)-1,10-diaza-18-crown-6

Institute of Physiologically Active Substances, Russian Academy of Sciences, Chernogolovka. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 5, pp. 166–168, September–October, 1992.     

ESR studies of the alkali metal complexes of verdazyl-labeled benzo-15-crown-5

A verdazyl derivative of benzo-15-crown-5 ($\text{1}$) has been prepared, and the complex formation between the spin labeled crown ether ($\text{1}$) and the alkali metal salts has been studied by ESR spectroscopy.     

Cyclopentadienyl, indenyl, and fluorenyl complexes of sodium with 15-crown-5

The sodium complexes [NaC₅H₅(15-crown-5)] (1a), [NaC₉H₇(15-crown-5)] (1b), and [NaC₁₃H₉(15-crown-5)] (1c, C₅H₅=cyclopentadienyl, C₉H₇=indenyl, C₁₃H₉=fluorenyl) were synthesized from NaC₅H₅, NaC₉H₇, NaC₁₃H₉, and 15-crown-5. Single crystal X-ray diffraction analyses were carried out for all three compounds 1a, 1b, 1c, and show that monomeric units were present in the solid state with the organic aromatic anion coordinated to the sodium cation via the five-membered ring.     

Erbium complexes with tetra-15-crown-5-phthalocyanine: Synthesis and spectroscopic study

Erbium mono-, bis-, and tris(phthalocyaninates) with tetra-15-crown-5-phthalocyanine (H₂R₄Pc) were synthesized and studied by spectroscopic methods. The complexes were obtained by reacting H₂R₄Pc with erbium salts in high-boiling solvents. To compare the efficiency of two approaches to the synthesis of double-decker lanthanide phthalocyaninates, bis(phthalocyaninate) [Er(R₄Pc)₂] was also obtained by a template procedure from dicyanobenzo-15-crown-5. A combination of physicochemical methods (UV and IR spectroscopy, MALDI-TOF mass spectrometry, ¹H NMR) was used for identifying the compounds and proving their individuality and structure. The photoluminescence method demonstrated that solutions of erbium bis- and tris(phthalocyaninates) in CHCl₃ are nonfluorescent in the visible range of light whereas solutions of mono(phthalocyaninate) in CHCl₃ and DMSO exhibit fluorescence with maxima at 707 and 695 nm, respectively. The oxidation of erbium mono(phthalocyaninate) leads to fluorescence quenching.     

Crystal structure of N,N′-bis(diisopropoxythiophosphoryl)-1,10-diaza-18-crown-6

Institute of Physiologically Active Substances, Russian Academy of Sciennces, Chernogolovka. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 5, pp. 161–163. September–October. 1992.