The kinetics and mechanism of aquation and base hydrolysis of the cis-[Co(cyclen)Cl2]+ cation (cyclen=1,4,7,10-tetraazacyclododecane)

The aquation of cis-[Co(cyclen)Cl2]+ (cyclen=1,4,7,10-tetraazacyclododecane) has been studied over a range of temperatures with 0.1 mol dm–3 HNO3 as solvent. At 25°C, kaq=4.5×10–3 s–1 with H=78 kJ mol–1 and S298=–21 J K–1 mol–1. Base hydrolysis of cis-[Co(cyclen)Cl2]+ is extremely rapid with kOH=2.1×107 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3. This is the largest rate constant so far reported for the base hydrolysis of a cis-dichloro-complex of a saturated macrocycle. The activation parameters, H=53 kJ mol–1 and S298=73 J K–1 mol–1 are consistent with a mechanism in which deprotonation of the substrate is rate-determining. This conclusion is confirmed by the observation of general base catalysis by formate ion. The Brønsted value for the reaction is ca. 0.72 and SN1(CB) and E2 mechanisms are considered to account for the kinetic results. Base hydrolysis of cis-[Co(cyclen)(OH)Cl]+ has also been studied in the pH range 6.5 to 8.7. The value of kOH=3.8×102 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3 with H=110 kJ mol–1 and S298=171 J K–1 mol–1 are consistent with an SN1(CB) mechanism.     

Synthesis and constants of 6-nitro-2,3-dihydroquinolin-4(1h)-one

In the literature, there has appeared a communication [1] on the synthesis of 6-nitro-2, 3-dihydroquinolin-4(1H)-one (I) with mp 125–126C (2,4-dinitrophenylhydrazone, mp 269–270C) by the reaction of p-nitroaniline with acrylic acid. Quinolinone I with mp 232–234C (2,4-dinitrophenylhydrazone, mp 327–329C) was obtained by us by decarboxycyclization of N-(2-carboxy-4-nitrophenyl)--alanine in acetic anhydride in the presence of potassium acetate [2].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1390–1392, October, 1979.     

Kinetics and mechanism of osmium(VIII) mediated cerium(IV) oxidation of dimethylsulfoxide in aqueous sulfuric acid

Under the experimental conditions [DMSO]T [CeIV]T [Os]T the kinetics of oxidation of dimethylsulfoxide (DMSO) to dimethylsulfone (DMSO2) have been followed at different temperatures (40–55°C) in 1.0 mol dm–3 sulfuric acid media. The rate of disappearance of [CeIV] shows a first-order dependence on both [Os]T and [DMSO]T and zeroth-order kinetics with respect to [CeIV]. The suggested mechanism involves oxidation of DMSO by OsVIII in a rate-determining step through an outer-sphere mechanism, followed by rapid regeneration of OsVIII by CeIV from OsVI. The rate law conforms to: –d[CeIV]/dt=k0=k[Os]T[DMSO]T. The values of k and the activation parameters are: 102k=(4.9 ± 0.10) mol–1 dm3 s–1 at 40°C, [H2SO4] =1.0 mol dm–3;H=58±3kJmol–1, S= –88 ±5JK–1mol–1.     

Reaction of trans-tetracyanodioxomolybdate(IV) with salicylaldehyde as an important stage in the Schiff base ligand formation. Kinetics and mechanism

The kinetics of the reaction between the protonated species of trans-[Mo(CN)4O2]4– and salicylaldehyde (Hsal) was studied in the 7.8–12.0 pH range in H2O-MeOH mixtures. Spectroscopic characterization of the product indicates that the aqua and cyano ligands are substituted by sal– with formation of the [Mo(CN)3O (sal- 2O,O)]2– ion. The formation quotient, Kf for the overall reaction=31 (±1) at 25°C. In the presence ofan excess of ligand, the rate law is of the formd[Mo(CN)3O(sal- 2O,O)2–]/dt =kobs[Mo(CN)4O (H2O)2–]. The kobs value is equal to 2.9 (±8)×10–3 at 25°C. The activation parameters H (kobs) and S (kobs) are 103 (±9)kJmol–1 and 45 (±8)JK–1mol–1, respectively. The amount of the product formed decreases with increasing pH but the rate of the product formation increases. The reaction mechanism and the possible formation of Schiff base ligands in the presence of amines are discussed.     

Oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82− and by IO4− in binary aqueous solvent mixtures at pressures up to 1.25 kbar

Second order rate constants and activation parameters H, S, and V have been measured for the oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82– and by IO4– in highly aqueous H2O – t-BuOH mixtures. The changes in solvation on going from the initial to the transition state are discussed on the basis of the transfer functions Gto, Hto and Sto. Whereas Gt changes smoothly as the proportion of t-BuOH increases, the plots of Ht and TSt exhibit mirror behaviour and pass through extrema located around x2(t- BuOH)=0.038. Information on the role of solvation is complemented by the determination of activation volumes. These are discussed in terms of intrinsic and solvational contributions. It is proposed that changes in hydrophobic hydration are of principal importance in determining the response of H, S, and V to changes in solvent composition in H2O – t-BuOH mixtures.     

Kinetics and mechanism of the interaction of DL-methionine with cis-diaquaethylenediamine platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of DL-methionine with [Pt(en)(H2O)2]2+ have been studied spectrophotometrically as a function of [Pt(en)(H2O)22+], [DL-methionine], PH and temperature. The reaction proceeds via a rapid outer sphere association followed by two slow consecutive steps having first order dependence on the aqua ion and methionine concentrations. Activation parameters have been evaluated using the Eyring equation. The low H1 (15.6 kJ mol–1) and large negative value of S1 (–230 J K–1 mol–1) as well as H2 (19.5 kJ mol–1) and S2 (–226 J K–1 mol–1) indicate an associative mode of activation for both the aqua ligand substitution processes in the two consecutive steps.     

Thermal study of synthesis of cryptohalite

The present work represents a thermal study of synthesis of cryptohalite (Ammonium silicon hexafluoride) by sintering of quartz with ammonium fluoride using a derivatograph. The reaction products were identified microscopically and by using a Siemens Crystalloflex diffractometer. The DTA curves indicate that the intensive formation of cryptohalite takes place at 125–155C by an endothermic reaction. Cryptohalite is unstable and dissociates at 320–335C as represented by the sharp and large endothermic peaks at these temperatures.The resulted cryptohalite is colorless in thin sections and crystallizes in cubic system, in the form of octahedral crystals with perfect (111) cleavage. The dimorph bararite is not detected in all runs.

---

Zusammenfassung Mittels eines Derivatographen wurde die Synthese von Kryptohalit (Ammoniumsiliziumhexafluorid) durch Sintern von Quarz mit Ammoniumfluorid thermisch untersucht. Die Reaktionsprodukte wurden mikroskopisch und mit Hilfe eines Siemens-Crystalloflex Diffraktometers identifiziert. Die DTA-Kurven zeigen, da\ die intensive Bildung von Kryptohalit in einer endothermen Reaktion bei 125–155C abläuft. Wie durch die scharfen und intensiven endothermen Peaks bei 320–335C gezeigt wird, ist Kryptohalit bei dieser Temperatur instabil und dissoziiert.Das erhaltene Kryptohalit ist in dünnen Schnitten farblos und kristallisiert im kubischen System in der Form von oktaedrischen Kristallen mit perfekter (111) Spaltbarkeit. Das dimorphe Bararit konnte in keinem der Versuche beobachtet werden.

     

Kinetics and mechanism of the acid-catalysed decarboxylation ofcis-[Co(cyclen)CO3]+

Summary The acid catalysed decarboxylation ofcis-[Co(cyclen)CO₃] has been studied over a range of nitric acid concentrations, at 25, 35.4 and 45°. The rate expression takes the form: k_obs=k₀+k₁ [H⁺], where k_obs is the observed first order rate constant at constant hydrogen ion concentration. The ko term which represents the spontaneous or water reaction is kinetically unimportant at the acidities used in the study. The activation parameters for the acid-catalysed decarboxylation are H=100.4 kj mol^–1 and S ₂₉₈=+51 JK^–1mol^–1. The acid catalysed reaction is subject to a deuterium solvent isotope effect consistent with a mechanism involving a rapid preequilibrium protonation of the complex followed by a slow ratedetermining ring opening of the carbonate ring.     

Solvent effects on the kinetics of solvolysis of trans-dichlorobis (N-methylethylenediamine)cobalt(III) ion in water–propan-2-ol and water–acetonitrile mixtures

First order solvolysis rates of the trans-dichlorobis (N-methylethylenediamine) cobalt(III) ion have been measured over a wide range of solvent compositions and temperatures in water–propan-2-ol and water–acetonitrile mixtures. The rate of solvolysis is faster in the former mixtures rather than the latter. Plots of log(rate constant) versus the reciprocal of the dielectric constant of the co-solvent, and also versus the Grunwald–Winstein Y-values are non-linear for both co-solvents; this non-linearity is derived from a large differential effect of solvent structure between the initial and transition states. However, extrema in the variation of enthalpy H and entropy S of activation correlate well with the extrema in physical properties of the mixtures which are related to changes in solvent structure. Linear plots of H versus S were obtained and the isokinetic temperature indicates that the reaction is entropy controlled. The application of a free-energy cycle shows that changes in solvent structure affect the pentacoordinated cobalt(III) ion in the transition state more than the hexacoordinated cobalt(III) ion in the initial state. In addition, the stabilizing influence of changes in solvent structure is greater in propan-2-ol–water mixtures than in acetonitrile–water mixtures, and the difference becomes greater as the mole fraction, x2 of the organic co-solvent increases.     

Measurement of specific heat and energetic characterization of materials up to high temperatures

A new DSC system has been developed which not only allows quantitative results in the temperature of –160C to 700C, but also allows the quantitative determination of a variety of material properties up to 1500C. For example, the specific heat of materials can be measured to at least 1400C, while enthalpies, etc. can be measured to 1500C.

---

Zusammenfassung Ein neuartiges DSC Messystem (Netzsch DSC 404) wurde entwickelt, das sich durch hohe Reproduzierbarkeit der Basislinie, grosse Empfindlichkeit und breiten Temperaturanwendungsbereich (–160C bis 700C resp. bis 1500C) auszeichnet. Die Messanordnung ermöglicht die Verwendung von unterschiedlichen GasatmosphÄren als auch Messungen im Vakuum. Es werden Beispiele der Bestimmung von SchmelzvorgÄngen, der Glasumwandlungstemperatur, der KristallinitÄt und der spezifischen WÄrme, sowohl für Polymere als auch für anorganische Materialien dargestellt und diskutiert.

     

Kinetics and mechanism of the interaction of thiourea with cis-diaquaethylene-diamineplatinum(II) perchlorate in aqueous medium

The kinetics of the interaction of thiourea with [Pt(en)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(en)(H₂O)₂]²⁺, [thiourea] and temperature at a particular pH(4.0), where the substrate complex exists predominantly as the diaqua species and the thiourea ligand as a neutral molecule. The reaction proceeds via a rapid outer sphere association followed by two slow consecutive steps, the second step exhibiting first order dependence on the aqua ion and thiourea concentrations. The activation parameters for both the steps have been evaluated: (H ₁ = 54.8 ± 1.2 kJ mol^–1, S ₁ = –96 ± 4 J K^–1 mol^–1, H ₂ = 27.9 ± 0.8 kJ mol^–1 and, S ₂ = –183 ± 2.6 J K^–1 mol^–1). The low enthalpy of activation and large negative values of entropy of activation indicate an associative mode of activation for both consecutive steps.     

Theoretical studies of [n]paracyclophanes and their valence isomers

Summary The valence isomerisations of benzene, [6]- and [7]paracyclophane to their Dewar benzene and prismane isomers are studied with the MNDO method using the unrestricted Hartree-Fock (UHF) and the configuration interaction (C.I.) approximations. The enthalpy of the reaction Dewar benzene benzene is H° _r =–68.9 kcal/mol and the activation enthalpy is H°=27.9 kcal/mol (with C.I.). The reaction path hasC _2v symmetry.The determination of several points of the lowest potential energy surface of [6]- and [7]paracyclophanes leads to a minimum reaction path having the same topology as for the potential energy surface of the nonbridged benzene. The only difference is a quantitative change in the energy values of the aromatic isomers due to the deformation introduced by the alkyl chain. For [6]paracyclophane, the activation enthalpy is H°=24.6 kcal/mol and the activation entropy is S ⁰=0.6 cal K^–1 mol^–1 calculated with C.I.The enthalpy of the reaction prismane Dewar benzene is H° _r –32 kcal/mol and the activation enthalpy is H°19 kcal/mol. The highest molecular symmetry group common to both molecules isC _2v , whereas the symmetry group of the reaction path is lowered toC _s . Along this reaction path is located a biradicaloid intermediate, separated by low activation barriers from the products. No significant changes of the potential energy surfaces are found for the bridged [n]prismanes and the [n]Dewar benzenes.All the calculated values, reaction enthalpies, activation enthalpies and entropies, are in a good agreement with literature experimental data.This article is dedicated to Professor A. Pullman     

Kinetics of aquation of trans-dichlorobis(N,N′-dimethylethylenediamine)cobalt(III) ion in water–methanol in water–propan-2-ol media

The complex trans-[Co(dmen)2Cl2]Cl (dmen=N,N-dimethylethylenediamine) has been prepared and characterized by elemental analysis, u.v.-vis. and i.r. spectra. The kinetics of the primary aquation of trans-[Co(dmen)2Cl2] in H2O, H2O–MeOH and H2O–i-PrOH have been examined over a wide range of solvent compositions and temperatures (40–55°C). Plots of rate constants (log k) versus the reciprocal of the dielectric constant of the medium (Ds–1) and Grunwald–Winstein values of the solvent (Y) were found to be non-linear. The variation of enthalpies (H) and entropies (S) of activation with solvent composition has been determined. Plots of H or S versus the mole fraction of each solvent exhibit extrema at x2=ca. 0.16 and 0.27 for MeOH and at x2=ca. 0.03 and 0.14 for i-PrOH. Furthermore, the cycle relating the free energy of activation in H2O to that in H2O–co-solvent shows that the stabilizing influence of the changes in the solvent structure is greater on the emergent five-coordinate cation in the transition state than that on the complex ion in the initial state, with the difference becoming greater as the mole fraction of the co-solvent increases.     

Reactivity of tungsten(0) and molybdenum(0) pentacarbonyl thiobenzoate anions: thiobenzoate as a cis-CO labilizing ligand

The [Et₄N][M(CO)₅SCOPh] complexes (1a, M = Mo; 2a, M = W) have been prepared at ambient temperatures by reacting the photogenerated M(CO)₅ THF intermediate with [Et₄N][SCOPh] in THF. Kinetic studies of the reactions of the anions [M(CO)₅SCOPh]^– with the tri(iso-propyl)phosphite (L) ligand under pseudo-first-order conditions indicate that these reactions are first-order in substrate and are independent of the P(OPr-i)₃ concentration. It is thus envisaged that these CO substitutions proceed via a mechanism which involves initial cis-M—CO bond-breaking, followed by fast attack of the incoming nucleophile on the resulting intermediate to give [cis-M(CO)₄{P(O-Pri)₃}SCOPh]^–. This facile displacement of cis-CO indicates the labilizing nature of the thiobenzoate ligand, most probably by virtue of distal oxygen atom participation. Activation parameters for the reactions are: [M(CO)₅SCOPh]^– + L cis-[M(CO)₄(L)SCOPh]^– + CO M = Mo, H = 24.6(2) kcal mol^–1, S = 8.2(6) eu; M = W, H = 28.4(2) kcal mol^–1, S = 11.3(5) eu. Kinetic data and the mechanism of these ligand-substitutions are discussed.     

Kinetics and mechanism of the interaction of azide with [(H2O)(tap)2RuORu(tap)2-(H2O)]2+ ion at physiological pH

The title reaction has been studied spectrophotometrically in aqueous medium as a function of [substrate complex], [ligand], pH and temperature at constant ionic strength. At the physiological pH (7.4) the interaction with azide shows two distinct consecutive steps, i.e., it shows a non-linear dependence on the concentration of N₃ ^–; both processes are [ligand]-dependent. The rate constant for the processes are: k ₁10^–3 s^–1 and k ₂10^–5 s^–1. The activation parameters calculated from Eyring plots are: H ₁ = 14.8 ± 1 kJ mol^–1, S ₁ = –240 ± 3 J K^–1 mol^–1, H ₂ = 44.0 ± 1.5 kJ mol^–1 and S ₂ = –190 ± 4 J K^–1 mol^–1. Based on the kinetic and activation parameters an associative interchange mechanism is proposed for the interaction process. From the temperature dependence of the outersphere association equilibrium constant, the thermodynamic parameters calculated are: H ₁ ⁰ = 4.4 ± 0.9 kJ mol^–1, S ₁ ⁰ = 64 ± 3 J K^–1 mol^–1 and H ₂ ⁰ = 14.2 ± 2.9 kJ mol^–1, S ₂ ⁰ = 90 ± 9 J K^–1 mol^–1, which gives a negative G ⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex.     

Reaction of diazoalkanes with unsaturated compounds. 10. 1,3-Dipolar cycloaddition of diazocyclopropane to strained cycloalkenes

The reaction of diazocyclopropane, generated in situ by alkaline hydrolysis of N-nitroso-N-cyclopropylurea at –20 to –40C, with the double bond of norbornene hydrocarbons or 3,3-dimethylcyclopropene is a 1,3-dipolar cycloaddition and affords 45–70% yields of thermally stable 1-pyrazolines possessing a spiro-joined cyclopropane fragment. Methylenecyclopropane under the same conditions is a less effective and selective interceptor of diazocyclopropane, forming in 10% yields not only isomeric 1-pyrazolines but the corresponding product of cyclopropylization, dispiro[2.0.2.1]heptane.For previous communication, see [1].Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1057–1062, May, 1991.     

Study of phenolic resin/EVA blends by thermal analysis

The properties of polymeric blends originate from the synergistic association of their components. In this investigation, phenolic resins obtained by the reaction of cashew-nut shell liquid (CNSL) and aldehyde are used in several applications. Mixtures of CNSL with industrial reject ethylene-co-vinyl acetate (EVA reject) were prepared with an EVA reject content up to 70%. The thermal compatibility and stability were evaluated by means of thermogravimetry (TG), derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC). For blends containing a high percentage of EVA reject, the TG curves clearly show two decomposition stages, one at 350C and the other at 450C (onset 467C). The DIG curves of the blend containing 70% CNSL exhibit decomposition at 240C. The DSC curves show that the samples containing a high percentage of EVA reject are incompatible, withT _g values around –30C.The authors would like to thank PETROBRAS/CENPES/DIQUIM for the NMR facilities and thermal measurements.     

Kinetics of formation,dissociation and equilibrium constants of pentacyanoaquoruthenate(II) with heterocycles

The kinetics of formation and dissociation reactions of [Ru(CN)₅L]^3– with a series of heterocyclic ligands were studied in aqueous media. In this presence of an excess of heterocycle, the observed second order rate constants were calculated from the k_obs versus [ligand] plot at =0.100m NaClO₄. Activation parameters for the formation reactions (H=28±7kJmol^–1 and S=140±35JK^–1mol^–1) are comparable for all systems, indicating a common mechanism. The kinetics of exchange of coordinated heterocycles for 1,3,5-triazine yielded a rate saturation typical of a limiting dissociative mechanism. Activation parameters of the limiting first order specific rate of dissociation reactions were H=85±7kJmol^–1 and S=18±4JK^–1mol^–1. Equilibrium constants were calculated from the second order rates of formation and pseudo-first order rates of dissociation reaction.     

DTA identification of polycaprolactone

Polycaprolactone (PCL) is a new material used in orthopedics. It is characterized by an endothermic melting peak at about 61C, an endothermic decomposition peak at about 380C and an exothermic peak at about 453C. These three observed phenomena and the corresponding thermodynamic data made it easily possible to identify PCL among the other polymers previously examined with Differential Thermal Analysis (DTA).

---

Zusammenfassung Polycaprolacton ist ein neuartiger Kunststoff, der in der OrthopÄdie als Knochenersatz Verwendung findet. Die Charakterisierung und Identifizierung kann durch thermoanalytische Messungen (DTA) auf Grund von endothermen VorgÄngen bei 61 und 380C und eines exothermen Vorgangs bei 453C erfolgen.

---

---

The authors thank A. Crestin for technical contribution.     

Thermal changes in decahydro-closo-decaborate(2-)copper(I) Cu2B10H10 and the nature of copper borides

Thermal changes in Cu₂B₁₀H₁₀ have been studied over the temperature range 25–800C using DTA, gas-volume, IR-spectroscopic, and x-ray phase analytical methods. Decomposition of the salt starts at 290C and is accompanied by formation of amorphous and crystalline phases of CuB₂₄, Cu, and B_am. A crystalline copper phase starts to form at 290C.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 503–506, March, 1990.