Phase behavior and microstructures of nonionic fluorocarbon surfactant in aqueous systems

The phase behavior and self-assembled structures of perfluoroalkyl sulfonamide ethoxylate, C8F17SO2N(C3H7)(CH2CH2O)20H (abbreviated as C8F 17EO20), a nonionic fluorocarbon surfactant in an aqueous system, has been investigated by the small-angle X-ray scattering (SAXS) technique. The C8F17EO20 forms micelles and different liquid crystal phases depending on the temperature and composition. The fluorocarbon micellar structure induced by temperature or composition change and added fluorocarbon cosurfactant has been systematically studied. The SAXS data were analyzed by the indirect Fourier transformation (IFT) and the generalized indirect Fourier transformation (GIFT) depending on the volume fraction of the surfactant and complemented by plausible model calculations. The C8F17EO20 forms spherical type micelles above critical micelle concentration (cmc) in the dilute region. The micelle tends to grow with temperature; however, the growth is not significant on changing temperature from 15-75 degrees C, which is attributed to the higher clouding temperature of the surfactant (>100 degrees C). On the other hand, the micellar structure (shape and size) is apparently unaffected by composition (1-25 wt %) at 25 degrees C. Nevertheless, addition of fluorocarbon cosurfactant of structure C8F17SO2N(C3H7)(CH2CH2O)H (abbreviated as C8F17EO1) to the semidilute solution of C8F17EO20 (25 wt %) favors micellar growth, which finally leads to the formation of viscoelastic wormlike micelles, as confirmed by rheometry and supported by SAXS. The onset sphere-to-wormlike transition in the structure of micelles in the C8F17EO20/water/C8F17EO1 system is due to the fact that the C8F17EO1 tends to go to the surfactant palisade layer so that the critical packing parameter increases due to a decrease in the effective cross-sectional area of the headgroup. As a result, spherical micelles grow into a cylinder, which after a certain concentration entangle to form a rigid network structure of wormlike micelles.     

Oil-induced anomalous thermoresponsive viscoelasticity in fluorinated surfactant systems

We have studied the rheology and structure of a mixed nonionic fluorinated surfactant, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(10), and perfluorodecalin (C(10)F(18)) or perfluoropolyether oil, (C(3)F(6)O)(n)COOH, in an aqueous system using rheometry and small-angle X-ray scattering (SAXS) techniques. In the absence of oil, the viscosity of surfactant solutions (10 and 15 wt %) first decreases slightly and then more strongly with temperature. Addition of a small amount of fluorinated oil to the wormlike micellar solution disrupts the network structure and decreases the viscosity sharply at lower temperature indicating a rod-sphere transition. The trend of the viscosity curve changes gradually and an anomalous viscosity maximum as a function of temperature appears. It is found that perfluoropolyether oil decreases the viscosity more effectively than perfluorodecalin. The generalized indirect Fourier transformation (GIFT) analysis of the SAXS data confirmed the formation of long rod-like particles in an oil-free, surfactant/water system at 20 degrees C. Addition of a trace amount of fluorinated oils induces modulation in the structure of the micelles and eventually short rods or spherical particles are formed. The decreasing trend in the viscosity with oil concentration is thus attributed to the microstructure changes induced by the added oils.     

Intrinsic parameters for the structure control of nonionic reverse micelles in styrene: SAXS and rheometry studies

Shape, size, and internal structure of nonionic reverse micelle in styrene depending on surfactant chain length, concentration, temperature, and water addition have been investigated using a small-angle X-ray scattering (SAXS) technique. The generalized indirect Fourier transformation (GIFT) method has been employed to deduce real-space structural information. The consistency of the GIFT method has been tested by the geometrical model fittings, and the micellar aggregation number (N(agg)) has been determined. It was found that diglycerol monocaprate (C(10)G(2)), diglycerol monolaurate (C(12)G(2)), and diglycerol monomyristate (C(14)G(2)), spontaneously self-assemble into reverse micelles in organic solvent styrene under ambient conditions. The micellar size and the N(agg) decrease with an increase in surfactant chain length, a scenario that could be understood from the modification of the critical packing parameter (cpp). A clear picture of one-dimensional (1-D) micellar growth was observed with an increase in surfactant weight fraction (W(s)) in the C(10)G(2) system, which eventually formed rodlike micelles at W(s) ≥ 15%. On the other hand, micelles shrunk favoring a rod-to-sphere type transition upon heating. Reverse micelles swelled with water, forming a water pool at the micellar core; the size of water-incorporated reverse micelles was much bigger than that of the empty micelles. Model fittings showed that water addition not only increase the micellar size but also increase the N(agg). Zero-shear viscosity was found to decrease with surfactant chain but increase with W(s), supporting the results derived from SAXS.     

Short haired wormlike micelles in mixed nonionic fluorocarbon surfactants

We have studied the rheological behavior of viscoelastic wormlike micellar solution in a mixed system of nonionic fluorinated surfactants, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(n) (n=10 and 20). Above critical micelle concentration, the surfactant, C(8)F(17)EO(20) forms small spherical micelles in water and the viscosity of the solution remains constant regardless of the shear rate, i.e., the solutions exhibit Newtonian behavior. However, upon successive addition of the C(8)F(17)EO(10) the viscosity of the solution increases and at certain C(8)F(17)EO(10) concentration, shear-thinning behavior is observed indicating the formation wormlike micelles. Contrary to what is expected, there is a viscosity increase with the addition of the hydrophilic C(8)F(17)EO(20) to C(8)F(17)EO(10) aqueous solutions at certain temperature and concentration, which could be attributed to an increase in rigidity of the surfactant layer and to the shifting of micellar branching to higher temperatures. The oscillatory-shear rheological behavior of the viscoelastic solution can be described by Maxwell model at low frequency. Small-angle X-ray scattering (SAXS) measurements confirmed the formation of small spherical micellar aggregates in the dilute aqueous C(8)F(17)EO(20) solution. The SAXS data shows the one-dimensional growth on the micellar size with increase in the C(8)F(17)EO(10) concentration. Thus, the present SAXS data supports the rheological data.     

Viscoelastic micellar solutions in nonionic fluorinated surfactant systems

The formation and rheological behavior of a viscoelastic wormlike micellar solution in an aqueous solution of a nonionic fluorinated surfactant, perfluoroalkyl sulfonamide ethoxylate, of structure C8F17SO2N(C3H7)(CH2CH2O)10H was studied. Temperature-induced viscosity growth is observed even at low-surfactant concentration (approximately 1 wt %), and viscosity reaches the maximum at a temperature T(eta)-max. Upon successive increases in the temperature, the viscosity decreases, and ultimately a phase separation occurs. Small-angle X-ray scattering (SAXS) measurements confirm the presence of cylindrical aggregates at low temperature, which undergo continuous one-dimensional growth with increasing temperature, and ultimately, an indication of a slight lamellarlike structural pattern is observed, which probably comes from the formation of micellar joints or branching. Such changes in the microstructure result in a decrease in the viscosity and stress-relaxation time, while the network structure is retained; the trends in the evolution of shear modulus (Go) and relaxation time (tauR) with temperature are in agreement with this. With increased surfactant concentration, the temperature corresponding to the viscosity maximum (T eta-max) in the temperature-viscosity curve shifts to lower values, and the viscosity at temperatures below or around T eta-max increases sharply. A viscoelastic solution with Maxwellian-type dynamic rheological behavior at low-shear frequency is formed, which is typical of entangled wormlike micelles. Rheological parameters, eta(o) and Go, show scaling relationships with the surfactant concentrations with exponents slightly greater than the values predicted by the living-polymer model, but the exponent of tauR is in agreement with the theory. Dynamic light-scattering measurements indicate the presence of fast relaxation modes, associated with micelles, and medium and slow modes, associated with transient networks. The disappearance of the slow mode and the predominance of the medium mode as the temperature increases support the conclusions derived from SAXS and rheometry.     

Mixtures of hydrogenated and fluorinated lactobionamide surfactants with cationic surfactants: study of hydrogenated and fluorinated chains miscibility through potentiometric techniques

The work reported herein deals with the aqueous behavior of hydrocarbon and/or fluorocarbon ionic and nonionic surfactants mixtures. These mixtures were studied using potentiometric techniques in NaBr (0.1 mol L-1) aqueous solution as well as in pure water. Mixed micelles were formed from a cationic surfactant (dodecyl or tetradecyltrimethylammonium bromide respectively called DTABr or TTABr) and neutral lactobionamide surfactants bearing a hydrogenated dodecyl chain (H12Lac) or a fluorinated chain (CF3-(CF2)5-(CH2)2- or CF3-(CF2)7-(CH2)2-). We showed that concentrations of ionic and nonionic surfactants in the monomeric form as well as the composition of the mixed micelles can be specified thanks to a potentiometric technique. The complete characterization does not request any model of micellization a priori. The activities of the micellar phase constituents, as well as the free enthalpies of mixing, were calculated. The subsequent interpretation only relies on the experimental characterization. Comparison of the behaviors of the various systems with a model derived from the regular solution theory reveals the predominant part of electrostatic interactions in the micellization phenomenon. It also appears that the energy of interaction between hydrogenated and fluorinated chains is unfavorable to mixing and is of much lower magnitude than the electric charges interactions.     

Viscoelastic micellar solutions in a mixed nonionic fluorinated surfactants system and the effect of oils

Formation and rheological behavior of viscoelastic wormlike micelles in aqueous solution of a mixed system of nonionic fluorinated surfactants, perfluoroalkyl sulfonamide ethoxylate, C8F17SO2N(C3H7)(CH2CH2O)nH (abbreviated as C8F17EOn) was studied. In the water-surfactant binary system C8F17EO20 forms an isotropic micellar solution over wide concentration range (>85 wt %) at 25 degrees C. With successive addition of C8F17EO1 to the aqueous C8F17EO20 solution, viscosity of the solution increases swiftly, and a viscoelastic solution is formed. The oscillatory rheological behavior of the viscoelastic solution can be described by Maxwell model at low-frequency region, which is typical of wormlike micelles. With further addition of C8F17EO1, the viscosity decreases after a maximum and phase separation occurs. Addition of a small amount of fluorinated oils to the wormlike micellar solution disrupts the network structure and decreases the viscosity sharply. It is found that polymeric oil, PFP (F-(C3F6O)nCF2CF2COOH), decreases the viscosity more effectively than the perfluorodecalin (PFD). The difference in the effect of oil on rheological properties is explained in terms of the solubilization site of the oils in the hydrophobic interior of the cylindrical aggregates, and their ability to induce rod-sphere transition.     

Lattice Monte Carlo simulations of phase separation and micellization in supercritical CO2/surfactant systems: effect of CO2 density

Lattice Monte Carlo simulations are used to study the effect of nonionic surfactant concentration and CO2 density on the micellization and phase equilibria of supercritical CO2/surfactant systems. The interaction parameter for carbon dioxide is obtained by matching the critical temperature of the model fluid with the experimental critical temperature. Various properties such as the critical micelle concentration and the size, shape, and structure ofmicelles are calculated, and the phase diagram in the surfactant concentration-CO2 density space is constructed. On increasing the CO2 density, we find an increase in the critical micelle concentration and a decrease in the micellar size; this is consistent with existing experimental results. The variation of the micellar shape and structure with CO2 density shows that the micelles are spherical and that the extension of the micellar core increases with increasing micellar size, while the extension of the micellar corona increases with increasing CO2 density. The predicted phase diagram is in qualitative agreement with experimental phase diagrams for nonionic surfactants in carbon dioxide.     

Structure and rheology of reverse micelles in dipentaerythrityl tri-(12-hydroxystearate)/oil systems

We report the formation of reverse rod-like micelles and their rheological properties in novel nonionic surfactant, dipentaerythrityl tri-(12-hydroxystearate) (designated as WO-6)/oil systems without external water addition. Small-angle X-ray scattering (SAXS) was used to investigate the structure of the micelles and their flow properties were studied by rheological measurements. We found that WO-6 spontaneously self-assembles into reverse micelles in a variety of organic solvents at ambient conditions, their structure depending on solvent molecular architecture, surfactant concentration, and temperature. Rod-like micelles with a maximum length of ca. 12 nm and a cross section diameter of ca. 2 nm were observed in cyclohexane. When cyclohexane was replaced with a linear chain octane, the length and the cross section diameter were simultaneously increased. With a further increase of hydrocarbon chain length of solvent oils from octane to hexadecane, the rod-like micelles grew axially, keeping the cross section diameter (ca. 3 nm) virtually constant. Increasing surfactant concentration also favored one-dimensional micellar growth. On the other hand, micelles shrunk with the rise of temperature, which is similar to a rod-to-sphere transition, and is essentially the opposite temperature dependence to that often observed in aqueous micellar systems. A structural picture drawn by SAXS is well supported by rheology; the relative (zero-shear) viscosity of the WO-6/oil systems was found to be markedly greater than that expected for a dispersion of spherical particles due to the elongated micellar structure, despite quantitative inconsistency with semi-empirically predicted values for rigid rod-like particles.     

Phase behavior and self-organized structures of diglycerol monolaurate in different nonpolar organic solvents

Nonaqueous phase behavior and reverse micellar structures of diglycerol monolaurate (DGL) in different nonpolar organic solvents, such as n-decane, n-tetradecane, and n-hexadecane, have been studied over a wide range of compositions and temperatures. The equilibrium phases are identified by means of visual observation and small-angle X-ray scattering (SAXS). A solid phase present at lower temperature swells small amount of oils and transforms into a lamellar liquid crystalline structure at higher temperature. The melting temperature of the solid phase is virtually constant at all mixing ratios of the surfactant and oil. With the further increase of temperature, the liquid crystal transforms into an isotropic single-liquid phase near the surfactant axis, whereas there is a coexistence region of two isotropic phases near the solvent axis. The area of the two-liquid (II) phase region depends largely on the hydrocarbon chain length of the oils, the longer chain leading to the wider II area. Accordingly, the DGL surfactant is most miscible with decane, exhibiting a reduced miscibility with increasing solvent hydrocarbon chain length. Increasing temperature enhances the dissolution tendency of the surfactant in oil, where the two-liquid phase transforms into an isotropic single phase. SAXS analysis based on the GIFT technique is used to characterize the structure of the reverse micellar aggregates in the isotropic single-phase liquids. We have demonstrated that instead of changing polarity or a functional group of the solvent molecules, if we optimize the hydrophilic nature of the surfactant head group, the alkyl chain length of the solvent oils can serve as a tunable parameter of the micellar geometry. The hydrophilic surfactant DGL interestingly forms cylindrical micelles in nonpolar oils, decane, and tetradecane in the dilute region above the II phase region. The micellar size shows temperature dependence behavior, and the micellar length goes on increasing with decreasing temperature; eventually we found a signature of the onset of critical fluctuations in the deduced pair-distance distribution function near the phase separation line. The signature of the attractive interaction between the cylindrical reverse aggregates when a phase separation line is approached is likely to be a precursor of critical phenomenon. Doping with a trace of water results in a similar but more pronounced structural enhancement. The transfer free energy of diglycerol moiety from a hydrophilic environment to different hydrocarbon oils may account for these phenomena.     

Phase behavior of diglycerol fatty acid esters-nonpolar oil systems

Phase behavior of diglycerol fatty acid esters (Qn-D, where n represents the carbon number in the alkyl chain length of amphiphile, n = 10-16) were investigated in different nonpolar oils, liquid paraffin (LP70), squalane, and squalene. There is surfactant solid at lower temperature, and the surfactant solid does not swell in oil, and the melting temperature is almost constant in a wide range of compositions. In all of the systems, a lamellar liquid crystal (L(alpha)) is formed in a concentrated region at a temperature between the solid melting temperature and the isotropic two- or single-phase regions. In the dilute regions, reverse vesicles are formed in L(alpha) + O regions. There are two liquid-phase regions above the L(alpha) present region. This two-phase boundary corresponds to the cloud-point curve of nonionic surfactant aqueous solutions. However, instead of being less soluble in water at high temperature for the cloud point, the surfactant becomes more soluble in the organic solvents at high temperature. Namely, the effect of temperature on the solubility is opposite to the clouding phenomenon. When the hydrocarbon chain of the diglycerol surfactant decreases, the two-phase region becomes wider. In the case of a fixed surfactant, the surfactant is most miscible with squalene (narrowest two-phase regions) and the order of dissolutions tendency is squalene > LP70 > squalane. These results show that the hydrophilic moiety (diglycerol group) is more insoluble in oil compared with that of a conventional poly(oxyethylene)-type nonionic surfactant. Formation of reversed rodlike micelles was confirmed by SAXS scattering curve. When the hydrocarbon chain of surfactant is short, the micellar size becomes larger. In a fixed surfactant system, the reverse micellar size increases by changing oil from squalene to LP70. A small amount of water induces a dramatic elongation of reverse micelles.     

Shape and Size of Highly Concentrated Micelles in CTAB/NaSal Solutions by Small Angle Neutron Scattering (SANS)

Highly concentrated micelles in CTAB/NaSal solutions with a fixed salt/surfactant ratio of 0.6 have been studied using Small Angle Neutron Scattering (SANS) as a function of temperature and concentration. A worm-like chain model analysis of the SANS data using a combination of a cylindrical form factors for the polydisperse micellar length, circular cross-sectional radius with Gaussian polydispersity, and the structure factor based on a random phase approximation (RPA) suggests that these micelle solutions have a worm-like micellar structure that is independent of the concentration and temperature. The size of the micelle decreases monotonically with increasing temperature and increases with concentration. These observations indicate that large micelles are formed at low temperature and begin to break up to form smaller micelles with increasing temperature.     

Boltzmann distributions and slow relaxation in systems with spherical and cylindrical micelles

Equilibrium and nonequilibrium distributions of molecular aggregates in a solution of a nonionic surfactant are investigated at the total surfactant concentration above the second critical micelle concentration (CMC2). The investigation is not limited by the choice of a specific micellar model. Expressions for the direct and reverse fluxes of molecular aggregates over the potential humps of the aggregation work are derived. These aggregation work humps set up activation barriers for the formation of spherical and cylindrical micelles. With the aid of the expressions for molecular aggregate fluxes, a set of two kinetic equations of micellization is derived. This set, along with the material balance equation, describes the molecular mechanism of the slow relaxation of micellar solution above the CMC2. A realistic situation has been analyzed when the CMC2 exceeds the first critical micelle concentration, CMC1, by an order of magnitude, and the total surfactant concentration varies within the range lying markedly above the CMC2 but not by more than 2 orders of magnitude. For such conditions, an equation relating the parameters of the aggregation work of a cylindrical micelle to the observable ratio of the total surfactant concentration and the monomer concentration is found for an equilibrium solution. For the same conditions, but in the nonequilibrium state of materially isolated surfactant solution, a closed set of linearized relaxation equations for total concentrations of spherical and cylindrical micelles is derived. These equations determine the time development of two modes of slow relaxation in micellar solutions markedly above the CMC2. Solving the set of equations yields two rates and two times of slow relaxation.     

Kinetics of micellization: its significance to technological processes

The association of many classes of surface active molecules into micellar aggregates is a well-known phenomenon. Micelles are often drawn as static structures of spherical aggregates of oriented molecules. However, micelles are in dynamic equilibrium with surfactant monomers in the bulk solution constantly being exchanged with the surfactant molecules in the micelles. Additionally, the micelles themselves are continuously disintegrating and reforming. The first process is a fast relaxation process typically referred to as τ₁. The latter is a slow relaxation process with relaxation time τ₂. Thus, τ₂ represents the entire process of the formation or disintegration of a micelle. The slow relaxation time is directly correlated with the average lifetime of a micelle, and hence the molecular packing in the micelle, which in turn relates to the stability of a micelle. It was shown earlier by Shah and coworkers that the stability of sodium dodecyl sulfate (SDS) micelles plays an important role in various technological processes involving an increase in interfacial area, such as foaming, wetting, emulsification, solubilization and detergency. The slow relaxation time of SDS micelles, as measured by pressure-jump and temperature-jump techniques was in the range of 10⁻⁴–10¹ s depending on the surfactant concentration. A maximum relaxation time and thus a maximum micellar stability was found at 200 mM SDS, corresponding to the least foaming, largest bubble size, longest wetting time of textile, largest emulsion droplet size and the most rapid solubilization of oil. These results are explained in terms of the flux of surfactant monomers from the bulk to the interface, which determines the dynamic surface tension. The more stable micelles lead to less monomer flux and hence to a higher dynamic surface tension. As the SDS concentration increases, the micelles become more rigid and stable as a result of the decrease in intermicellar distance. The smaller the intermicellar distance, the larger the Coulombic repulsive forces between the micelles leading to enhanced stability of micelles (presumably by increased counterion binding to the micelles). The Center for Surface Science & Engineering at the University of Florida has developed methods using stopped-flow and pressure-jump with optical detection to determine the slow relaxation time of micelles of nonionic surfactants. The results show relaxation times τ₂ in the range of seconds for Triton X-100 to minutes for polyoxyethylene alkyl ethers. The slow relaxation times are much longer for nonionic surfactants than for ionic surfactants, because of the absence of ionic repulsion between the head groups. The observed relaxation time τ₂ was related to dynamic surface tension and foaming experiments. A slow break-up of micelles, (i.e. a long relaxation time τ₂) corresponds to a high dynamic surface tension and low foamability, whereas a fast break-up of micelles, leads to a lower dynamic surface tension and higher foamability. In conclusion, micellar stability and thus the micellar break-up time is a key factor in controlling technological processes involving a rapid increase in interfacial area, such as foaming, wetting, emulsification and oil solubilization. First, the available monomers adsorb onto the freshly created interface. Then, additional monomers must be provided by the break-up of micelles. Especially when the free monomer concentration is low, as indicated by a low CMC, the micellar break-up time is a rate limiting step in the supply of monomers, which is the case for many nonionic surfactant solutions. Therefore, relaxation time data of surfactant solutions enables us to predict the performance of a given surfactant solution. Moreover, the results suggest that one can design appropriate micelles with specific stability or τ₂ by controlling the surfactant structure, concentration and physico-chemical conditions, as well as by mixing anionic/cationic or ionic/nonionic surfactants for a desired technological application.     

Extension of the ladder model of self-assembly from cylindrical to disclike surfactant micelles

The ladder model of growth of cylindrical micelles gives expressions for the micellar size distribution and for the mean aggregation number, which are in good agreement with the experiment. Here, we consider this model and its extension to the case of disclike micelles. In analogy with the modeling of elongated micelles as sphero-cylinders, the disclike micelles can be modeled as toro-discs. Upon micelle growth, the hemispherical caps of a cylindrical aggregate remain unchanged, whereas the semitoroidal periphery of a disclike micelle expands. This effect can be taken into account in the expression for the size distribution of the disclike micelles, which predicts the dependence of the micelle mean aggregation number on the surfactant concentration. It turns out that disclike micelles could form in a limited range of surfactant concentrations, and that their mean aggregation number cannot exceed a certain maximal value. Large disclike micelles can exist only near the border with the domain of cylindrical micelles. Then, small variations in the experimental conditions could induce a transformation of the disclike micelles into cylindrical ones.     

NMR研究溶液中正十四烷基硫酸钠/正十四烷基聚氧乙烯醚(3)表面活性剂之间的相互作用

采用¹HNMR弛豫、自扩散系数和二维相敏(2DNOESY)实验研究了正十四烷基硫酸钠[n-CH₃(CH₂)₁₃OSO₃Na(STS)]和正十四烷基聚氧乙烯醚(3)[n-CH₃(CH₂)₁₃O(C₂H₄O)₃H(C₁₄E₃)]在溶液中的自聚集以及二者混合后的相互作用.结果表明,STS与C₁₄E₃混合后存在相互作用,并形成混合胶束;弛豫实验表明,混合胶束中STS疏水链质子运动更加受阻,C₁₄E₃的α-(4″)和β-CH₂(3″)处链堆积紧密.C₁₄E₃的亲水端(CH₂CH₂0)₃链卷曲紧贴在疏水壳表面外链堆积较紧密处.自扩散系数测量表明,混合胶束比单一阴离子表面活性剂形成的胶束大.单一非离子型胶束和混合胶束的亲水端(CH₂CH₂0)₃(5″)链构成相应较软和松散的外壳.单一C₁₄E₃在极性溶剂氯仿溶液中,质子运动比在水中自由度大,但2DNOESY谱中出现了少量分子间的交叉峰,也可能形成了一些小的聚集体.     

Effect of added poly(oxyethylene)dodecyl ether on the phase and rheological behavior of wormlike micelles in aqueous SDS solutions

Upon the addition of a short EO chain nonionic surfactant, poly(oxyethylene) dodecyl ether (C12EOn), to dilute micellar solution of sodium dodecyl sulfate (SDS) above a particular concentration, a sharp increase in viscosity occurs and a highly viscoelastic micellar solution is formed. The oscillatory-shear rheological behavior of the viscoselastic solutions can be described by the Maxwell model at low shear frequency and combined Maxwell-Rouse model at high shear frequency. This property is typical of wormlike micelles entangled to form a transient network. It is found that when C12EO4 in the mixed system is replaced by C12EO3 the micellar growth occurs more effectively. However, with the further decrease in EO chain length, phase separation occurs before a viscoelastic solution is formed. As a result, the maximum zero-shear viscosity is observed at an appropriate mixing fraction of surfactant in the SDS-C12EO3 system. We also investigated the micellar growth in the mixed surfactant systems by means of small-angle X-ray scattering (SAXS). It was found from the SAXS data that the one-dimensional growth of micelles was obtained in all the SDS-C12EOn (n=0-4) aqueous solutions. In a short EO chain C12EOn system, the micelles grow faster at a low mixing fraction of nonionic surfactant.     

NMR studies of aggregation and hydration of surfactants containing amide bonds

The consequences of including amide bonds into the structure of short-chain nonionic surfactants have been studied. Of particular interest were the possible effects of the hydrogen bonding ability of the amide group on the micellar shape. The aggregate structure and hydration of two different amide-containing surfactants, C7H15CO-NH-(CH2CH2O)4H and C7H15CO-(NH-C3H6-CO)2N(CH3)2, were investigated using NMR diffusometry (pulsed gradient spin echo NMR) as the main technique. Data from experiments on the surfactants, the hydrophobic probe molecule hexamethyldisilane (HMDS), and water were interpreted to gain information about the solution structures, and the results were compared to those on a previously studied alcohol ethoxylate surfactant of similar size, C8E4. Both of the amide-containing surfactants form small micelles within the whole investigated concentration range. At the critical micelle concentration, the aggregates are most probably spherical, and with increasing surfactant concentration there are indications of either a minor aggregate growth or agglomeration of the micelles. In addition, it was found that the presence of amide groups in the surfactant inhibits the intermicellar transport of HMDS, which occurs in the C8E4 system. From measurements on water diffusion in the three surfactant systems, it could be concluded that the surfactant hydration is higher when amide bonds are present.     

Quantitative model for prediction of hydrodynamic size of nonionic reverse micelles

The sizes of nonionic reverse micelles were investigated as a function of the molecular structure of the surfactant, the type of oil, the total concentration of surfactant [NP], the ratio of surfactant to total surfactant (r), the water to surfactant molar ratio (omega), temperature, salt concentration, and polar phase. The basis of our investigation was a mixture of nonylphenol polyethoxylates--NP4 and NP7, various polar phases, and several oils. Micelle sizes were determined using dynamic light scattering (DLS). A central composite experimental design was used to quantitatively model micelle size as a function of omega, surfactant concentration, and r. The model has demonstrated the capability of predicting the mean diameter of micelles from 4 to 13 with a precision of +/-2 nm as measured by DLS. This quantitative correlation between the size of reverse micelles and the synthetic variables provides the foundation for choosing experimental conditions to control reverse micelle size. In turn, this allows control of the size of nanoparticles synthesized within them.     

Ternary systems of nonionic surfactant Brij 35, water and various simple alcohols: Structural investigations by small-angle X-ray scattering and dynamic light scattering

Structural properties of ternary systems composed of nonionic surfactant dodecyl-poly(ethylene oxide-23) ether (C12E23, commercial name: Brij 35), water and various alcohols from ethanol to 1-decanol have been investigated using small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) techniques. All measurements were performed at the temperature 25 degrees C. SAXS experimental data were put on absolute scale using water as a secondary standard. The data of water-rich mixtures at low to moderate surfactant concentrations were evaluated using the generalized indirect Fourier transformation method (GIFT), which is based on the simultaneous determination of the intra- and inter-particle scattering contributions. In this way, the size and the shape of interacting scattering particles in real space could be deduced. The systems with a relatively low surfactant concentration (5 mass%) were studied most extensively. In these cases, the water-rich regions of the phase diagrams could be investigated into more detail, since in the alcohol-rich regions problems with the GIFT evaluation of the SAXS data were encountered. The presented results demonstrate the level of structural details that can be obtained on the basis of scattering methods and point out the specific stages of data evaluation and interpretation where one must be extremely precautious. As such they reveal the inner structuration of the complex ternary systems of our present interest. In parallel, they also indicate that the longer chain alcohols actually behave as real oil phases in the studied systems, as one might expect, and also confirm the well-known properties of different short to medium chain alcohols that act as co-solvents and/or co-surfactants in microemulsion systems depending on their chain length.