Signal-to-noise ratio improvement of a supercontinuum continuous-wave optical source using a dispersion-imbalanced nonlinear optical loop mirror

A multiwavelength continuous-wave (cw) optical source is based on supercontinuum (sc) produced in a highly nonlinear fiber. Noise properties of this optical source are studied through numerical simulations based on the nonlinear Schrödinger equation. The numerical simulations show that the amplified spontaneous emission (ASE) generation in an erbium-doped fiber amplifier and the ASE amplification during the sc generation result in a serious degradation of the signal-to-noise ratio (SNR). A novel scheme for improvement of the SNR of the multiwavelength cw optical source based on sc by using a dispersion-imbalanced nonlinear optical loop mirror is presented and the numerical simulation results are given. As a result, the average level of the SNR improvement is 11 dB and the eye-opening penalty is reduced by 0.91 dB due to the SNR improvement. In addition, the scheme can also be applied for improvement of the SNR of a pulse-type multiwavelength light source. PACS 42.50.Lc; 42.65.Re; 42.79.Sz; 02.60.Cb     

Multiwavelength erbium-doped fiber laser employing a nonlinear optical loop mirror

A stable and broad bandwidth multiwavelength erbium-doped fiber laser is proposed and demonstrated successfully. A nonlinear optical loop mirror which induces wavelength-dependent cavity loss and behaves as an amplitude equalizer is employed to ensure stable room-temperature multiwavelength operation. Up to 50 wavelengths lasing oscillations with wavelength spacing of 0.8 nm within a 3-dB spectral range of 1562-1605 nm has been achieved. The measured power fluctuation of each wavelength is about 0.1 dB within a 2-h period.     

High-energy femtosecond stretched-pulse fiber laser with a nonlinear optical loop mirror

A stretched-pulse fiber laser with a nonlinear optical loop mirror (NOLM) that produces 100-fs pulses with 1-nJ energy is demonstrated. These results constitute a 30-fold increase in pulse energy over previously reported femtosecond fiber lasers with a NOLM. Compared with previous stretched-pulse lasers, this laser offers a cleaner spectrum and improved stability, with comparable pulse duration and energy. Implications for the construction of truly environmentally stable lasers are discussed.     

Short optical pulse profile characterization using a nonlinear optical loop mirror

We propose in this work a technique for short pulse profile retrieval based on the Kerr effect in a fiber nonlinear optical loop mirror (NOLM). Under some assumptions, the profile can be determined from the energy transfer characteristic of the pulses through the NOLM, which can be measured with a low-frequency detection setup. Two numerical approaches are considered, both relying on the resolution of a system of nonlinear algebraic equations, and which differ in the way that the profiles are discretized. We show numerically that both approaches allow proper profile retrieval for a wide variety of pulse shapes. The two techniques are compared, and their advantages and drawbacks are discussed. The effect of the amplitude noise of the pulses is assessed, as well as the impact of an inaccurate knowledge of the NOLM transfer function, or of the energy transfer characteristic. The technique is demonstrated in the frame of the characterization of both ns and ps pulses.     

A tunable nonlinear optical loop mirror with feedback using linear highly birefringent fiber in the loop

The dynamics of a nonlinear optical loop mirror (NOLM) with feedback using a high birefringence fiber in the loop are investigated. The effect of rotating input polarization angle on the output power and polarization angle is numerically examined, illustrating the sensitivity of the NOLM with feedback to the input’s polarization state, as well as the polarization chaos present with sufficient input powers. The inclusion of a polarization-dependant loss in one or both arms of the coupler is also shown to change the output dynamical behaviour of the system.     

Polarization-insensitive nonlinear optical loop mirror demultiplexer with twisted fiber

We experimentally demonstrate reduction of the polarization sensitivity of a nonlinear optical loop mirror (NOLM) from 5 to 0.5 dB by use of 550 m of twisted dispersion-shifted fiber with a twist rate of 8 turns/m (24 turns/beat length). The twisting of the fiber induces circular birefringence and equates the parallel-and the orthogonal-polarization nonlinear phase-shift terms. Experimental results show that the polarization sensitivity monotonically decreases from 5 dB for nontwisted fiber to 0.5 dB for fiber that is twisted at a rate of 8 turns/m, and the twist rate should be more than 4 turns/m (>10 turns/beat length) for emulation of circularly polarized fiber. The minimum polarization sensitivity occurs when the control-pulse polarization is aligned with one of the eigenmodes of the twisted fiber. With the fiber twisted at a rate of 8 turns/m in the NOLM, the nonlinear transmission is 23% at a switching energy of 4 pJ/pulse. Simulations confirm the observed behavior and show that the remaining polarization sensitivity results from energy transfer between orthogonal modes of the signal pulse.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

New trend for optical signal-to-noise ratio of disturbed Raman fiber amplifier

In a distributed Raman fiber amplifier (DRFA), Raman amplification allows a lower signal launch powers to transverse the span above the noise floor while still increasing the optical signal-to-noise ratio (OSNR). It improves the noise figure and reduces the nonlinear penalty of fiber systems. In this paper, we demonstrate a new trend of OSNR at different pump configurations: forward, backward and bidirectional pumping for DRFAs as a function of fiber length. We also present the variation of OSNR with both input pump power and input signal power. It is found that forward pumping provides the highest OSNR, reaching its maximum value of 37 dB. However, backward pumping provides the smallest OSNR that has its maximum of 22 dB and the bidirectional pumping provides the moderate OSNR between the others having its peak of 26 dB.     

A linearly-polarized tunable Yb-doped fiber laser using a polarization dependent fiber loop mirror

A Ytterbium-doped linearly-polarized fiber laser is constructed with a polarization maintaining fiber Sagnac loop mirror. The fiber loop mirror made of polarization maintaining fiber coupler has a polarization dependent reflectivity, which provides the necessary polarization discrimination between the slow and fast axes. With a fiber Bragg grating written in normal polarization maintaining fiber as an output coupler, laser output of up to 5.6 W at 1070 nm is generated with a polarization extinction ratio of > 20 dB and an overall efficiency of 55%. The broadband polarization dependent reflection of the fiber loop mirror offers advantages of easy spectral tuning and simple linearly-polarized laser generation.     

Tunable dual-wavelength fiber laser based on a polarization-maintaining fiber Bragg grating and a Hi-Bi fiber optical loop mirror

We demonstrate experimentally the operation of a linear cavity dual-wavelength fiber laser using a polarization maintaining fiber Bragg grating (PM-FBG) as an end mirror that defines two closely spaced laser emission lines. The PM-FBG is also used to tune the laser wavelengths. The total tuning range is ∼8 nm. The laser operates in a stable dual-wavelength mode for an appropriate adjustment of the cavity losses for the generated wavelengths. The high birefringence (Hi-Bi) fiber optical loop mirror (FOLM) is used as a tunable spectral filter to adjust the losses. The FOLM adjustment was performed by the temperature control of the Hi-Bi fiber.     

Numerical analysis of Raman amplification and optical signal-to-noise ratio in a photonic crystal fiber

A numerical design on the triangular photonic crystal fiber (PCF) based backward multi-pump Raman amplifier is presented. It is demonstrated that high flat Raman gain can be reached based on PCF.Influences of different geometric parameters and germanium doping concentrations on the Raman net gain, amplified spontaneous emission (ASE) noise and double Rayleigh backscattering (DRBS) of the signal have been analyzed. For optimizing crystal fiber Raman amplifier (FRA), there is tradeoff between the geometric parameter and germanium doping concentration of triangular PCF. The results show that PCF is an appropriate candidate for high gain Raman amplifiers.     

Chaotic dynamics of erbium-doped fiber laser with nonlinear optical loop mirror

We experimentally and numerically demonstrate the chaotic dynamics of the erbium-doped fiber laser with a nonlinear optical loop mirror. When the polarization controllers are fixed at an appropriate orientation, we observe that the fiber laser exhibits a period-doubling route to chaos with increasing the pump power in the experiment and simulation. The numerical simulation shows a good agreement with the experimental results. The results show experimentally and numerically that the chaotic dynamics of the erbium-doped fiber laser is related to the polarization state and the pump power of light in the cavity.     

Mode-locked fiber laser based on an attenuation-imbalanced nonlinear optical loop mirror

We propose a mode-locked figure-eight fiber laser by utilizing an attenuation-imbalanced nonlinear optical loop mirror (AI-NOLM) for the first time. Stable self-starting passively mode-locked pulses as short as 296 fs are obtained. We have also confirmed that the pulse width of the laser can be varied by changing the amount of attenuation in the AI-NOLM.     

High extinction ratio multiplexer/demultiplexer with a Mach-Zehnder interferometer and a fiber loop mirror

A novel structure of high extinction ratio multiplexer/demultiplexer with a Mach-Zehnder interferometer (MZI) and a fiber loop mirror (FLM) is proposed. The experimental results show that the extinction ratio can be enhanced about two times in comparison with the conventional MZI.     

Removal of a mirror image and enhancement of the signal-to-noise ratio in Fourier-domain optical coherence tomography using an electro-optic phase modulator

A novel swept-laser-based Fourier-domain optical coherence tomography system using an electro-optic phase modulator was demonstrated. The imaging range was doubled by cancellation of the mirror image. The elimination of low-frequency noises resulting from dc and autocorrelation terms increased the sensitivity by 20 dB.     

Photonic multi-shape UWB pulse generation using a semiconductor optical amplifier-based nonlinear optical loop mirror

We propose and demonstrate a scheme to implement photonic multi-shape ultra-wideband(UWB) signal generation using a semiconductor optical amplifier(SOA) based nonlinear optical loop mirror(NOLM).By employing the cross phase modulation(XPM) effect,cross gain modulation(XGM),or both,multi-shape UWB waveforms are generated including monocycle,doublet,triplet,and quadruplet pulses.Both the shapes and polarities of the generated pulses are flexible to adjust,which may be very useful in UWB pulse shape modulation and pulse polarity modulation.     

Passively mode-locked fiber laser based on nonlinear optical loop mirror with semiconductor optical amplifier

We propose a novel passively mode-locked fiber laser based on nonlinear optical loop mirror with semiconductor optical amplifier (SOA). Its operation principle is based on the creation of a polarization asymmetry between the counter propagating beams, through the use of a SOA and a polarization controller in the loop. Stable pulse train with duration of 2 ns (FWHM) and repetition rate of 257.7 MHz has been experimentally obtained. Theoretical simulation results in well agreement with the experimental results are also presented.     

利用偏振控制器连续调节光纤环镜的反射率

研究了一种新型光纤环镜(FLM)的原理与特性，这种FLM由在普通光纤环镜中插入光纤型偏振控制器(PC)构成.通过等效光路分析建立了该FLM的理论模型，并对其反射特性进行了数值模拟.研究表明，通过改变PC的状态，即改变其双折射效应的快轴取向或强度，可连续调节FLM的反射率，反射率谱具有宽带特性，主要受光纤耦合器工作带宽的影响.此外，对FLM的反射特性还进行了实验研究.实验结果也证实，通过调节PC状态，FLM反射率可在其最大和最小值之间连续调节，实验测得FLM最大和最小反射率分别可达93%和2%.根据PC双折 关键词： 光纤环镜 偏振控制器 光纤耦合器 反射率     

NRZ to Manchester code conversion based on nonlinear optical fiber loop mirror

An approach to convert NRZ signal to Manchester code at 20 Gbit/s based on nonlinear optical fiber loop mirror (NOLM) is demonstrated. Using 20 Gbit/s NRZ data and optical clock as external pumps of the NOLM, the conversion of NRZ to Manchester code is successfully realized. The eye diagrams, waveforms and optical spectra are presented. We investigated the extinction ratio (ER) penalty (5 dB) to evaluate the system performance and analyzed the method to improve it. The proposed scheme is potential for applications in future networks.