首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
邻苯二酚紫体系催化动力学光度法测定痕量锡(Ⅱ)   总被引:1,自引:0,他引:1  
基于痕量锡在0.5 mol/L的H2SO4介质中对溴酸钾氧化邻苯二酚紫的褪色反应具有催化作用,建立了一种新的测定痕量锡的催化动力学光度法.确定了该褪色反应的最佳条件:0.5 mol/L H2SO4 1.5 mL;0.1 mol/L KBrO3 1.3 mL;2.0×10-4 mol/L邻苯二酚紫3.5 mL;反应时间为7 min;反应温度为100℃.方法的检出限为4.51×10-3 μg/mL,线性范围为0~3 μg/25 mL.对该方法进行了精密度测定,其相对标准偏差为1.9%.研究了反应的动力学参数,确定了催化反应的的速率方程和表现活化能(Ea=34.10 kJ/mol).该方法可用于水样、人发中痕量锡的测定,相对标准偏差分别为0.32%和1.2%,标准加入回收率分别为99.2%和99.1%.  相似文献   

2.
阻抑动力学光度法测定痕量铜   总被引:5,自引:0,他引:5  
在pH 4.5的HAc-NaAc缓冲溶液中, 痕量铜对KBrO3氧化亮绿SF的褪色反应有明显的阻抑作用, 据此建立了测定痕量铜的新方法. 方法的线性范围为0.004~0.048 μg/mL, 检出限为8.63×10-4 μg/mL, 已用于人发中铜的测定.  相似文献   

3.
在稀H2SO4介质中,以抗坏血酸为活化剂,痕量溴可强烈催化KClO3氧化甲基紫的反应,研究了反应的最佳条件及动力学参数,建立了测定痕量溴的新方法.方法的线性范围为0.0012~0.18 μg/mL,检出限为8.92×10-10g/mL.方法可用于大米、小麦及海带样品中痕量溴的测定.  相似文献   

4.
双波长双指示剂催化光度法同时测定Fe和Cu   总被引:1,自引:0,他引:1  
研究了在Na2SO4介质中,痕量Fe(Ⅲ)和Cu(Ⅱ)催化H2O2氧化次甲基蓝和甲基橙褪色的指示反应,通过测量440和664 nm波长下,催化反应体系和非催化反应体系的吸光度,建立了双波长、双指示剂催化动力学光度法同时测定痕量Fe(Ⅲ)和Cu(Ⅱ)的新方法.同时测定Fe(Ⅲ)和Cu(Ⅱ)的线性范围分别为0.0050~0.50 μg/25 mL和0.0025~0.75 μg/25 mL,检出限分别为6.9×10-8 g/L和8.7×10-8 g/L.用于水样中痕量Fe(Ⅲ)和Cu(Ⅱ)的测定.  相似文献   

5.
原位乙酰化-顶空固相微萃取测定水中酚类化合物   总被引:1,自引:0,他引:1  
建立了原位乙酰化-顶空固相微萃取-气相色谱/质谱联用测定水中酚类及氯酚类化合物的方法,考察了对衍生化以及萃取过程有影响的相关因素.结果表明,采用65 μm PDMS/DVB涂层纤维效果最好.在10 mL样品中,搅拌速率600 r/min、100 μL乙酸酐、0.10 g Na2HPO4、4.0 g NaCl、60 ℃时各被测组分检出限在0 014~0 044 μg/L之间,相对标准偏差(RSD)≤13.7%,在考察的浓度范围(0.02~25 μg/L)内均呈线性变化.实际废水样品测定结果表明,相对标准偏差(9.24%)和回收率(86.4%)符合环境水体中痕量酚类化合物监测的质控要求.  相似文献   

6.
在磷酸介质中 ,甲醛可以催化溴酸钾氧化 花青的反应使其退色 ,据此建立了顺序注射催化动力学光度法测定织物和室内空气中痕量甲醛的新方法。方法的线性范围 0 .5~ 7.0 μg mL ,检出限 0 .1 μg mL。用于树脂整理特殊织物和室内空气中痕量甲醛的测定 ,回收率在 97.0 %~ 1 0 5 .0 %之间。  相似文献   

7.
建立了测定植物中痕量脱落酸 (ABA) 的液相色谱-电喷雾串联质谱联用分析方法. 植物提取液先采用固相萃取 (SPE) 富集脱落酸并消除基体干扰, 然后以C18柱为固定相, V(甲醇)∶V(2 g/L甲酸水溶液)=50∶50为流动相分离脱落酸. 电喷雾(ESI)串联质谱采用负离子模式. 选择反应监测 (SRM) 模式用于脱落酸定量, 选择的离子对是263→153, 219. 脱落酸的线性范围为0.005~10 μg/mL, 检测限 (S/N=3) 为0.003 μg/mL, 加标0.02 μg和0.05 μg的回收率分别为98.3% 和103.5%. 该方法用于冬青芽中脱落酸的分析, 结果表明所建立的SPE-LC-MS/MS方法对于分析植物中的痕量脱落酸是有效的.  相似文献   

8.
阻抑动力学光度法测定乳品中的痕量碘   总被引:1,自引:0,他引:1  
研究了在稀H2SO4介质中,痕量I-对KBrO3氧化酸性品红的阻抑作用及其动力学条件,建立了测定痕量I-的阻抑动力学光度分析的新方法.测定I-的线性范围为0~0.04 μg/mL,检出限为1.1×10-9 g/mL.已用于乳品中痕量碘的测定.  相似文献   

9.
研究了钌(Ⅲ)催化高碘酸钾氧化固绿FCF褪色反应的反应条件, 测定了该反应的反应级数和表观活化能, 并建立了测定钌的新动力学光度法. 在选定实验条件下, 非催化反应体系与催化反应体系在633 nm波长处的吸光度差值与钌(Ⅲ)的质量浓度在0~0.001 μg/mL及0.001~0.0025 μg/mL范围内有良好的线性关系, 检出限为 9.53×10-11 g/mL. 对0.001 μg/mL钌(Ⅲ)测定11次标准偏差为1.7%, 方法的选择性好, 灵敏度高, 可用于钌精矿及合成样中痕量钌的测定.  相似文献   

10.
在H2SO4介质中及80 ℃的条件下, 钌对KIO4氧化孔雀石绿的褪色反应有明显催化作用, 探讨了反应的最佳条件, 据此建立了催化动力学光度法测定钌的新方法. 非催化反应吸光度A0与催化反应吸光度A之间的差值ΔA与Ru(Ⅲ)质量浓度在0.1~1.5 μg/25 mL范围内具有良好的线性关系, 检出限为4.31×10-10 g/mL. 测定了动力学参数, 反应为准一级反应, 表观速率常数为3.52×10-4 s, 表观活化能为46.97 kJ/mol. 该方法用于分子筛样品及活性炭样品中痕量钌的测定, 其回率在98.6%~104.8%之间, 符合痕量分析的要求.  相似文献   

11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.  相似文献   

12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

13.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

14.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.  相似文献   

15.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

16.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

17.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

18.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.  相似文献   

19.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

20.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号