Iron(II)-induced degradation of antimalarial beta-sulfonyl endoperoxides: evidence for the generation of potentially cytotoxic carbocations

Reactions of antimalarial beta-sulfonyl endoperoxides 9 and 10, which, like yingzhaosu A (2), derive from the 2,3-dioxabicyclo[3.3.1]nonane system 3, with iron(II) salts were studied. Product analysis of the iron(II)-induced degradations provided evidence for the intermediacy of carbon-centered cyclohexyl radicals 20 and 31 and their possible oxidation to the corresponding carbocations 21 and 32. It is conceivable that the antimalarial activity of beta-sulfonyl endoperoxides of type 5 may derive from alkylation of vital intraparasitic biomolecules by free radicals and/or carbocations, generated within the malaria parasite through a similar iron(II)-induced degradation process.     

Poly-α-ester degradation studies. II. Thermal degradation of poly(isopropylidene carboxylate)

The thermal degradation of poly(isopropylidene carboxylate) has been studied over the temperature range 200–800°C by using the kinetic and analytical techniques described in Part I of this series. Over a wide range of temperature, tetramethyl glycollide, acetone, carbon monoxide, and, to a lesser extent, methacrylic acid are observed when the products are rapidly swept away from the reaction zone. As decomposition temperature is increased, tetramethyl glycollide takes on the role of an intermediate, the more stable products carbon monoxide and acetone being formed from it. At the highest temperature examined, carbon monoxide begins to predominate, and its formation is accompanied by formation of small amounts of a carbonaceous residue. When the reaction products are allowed to remain in the reaction zone, which is possible at the lower end of the temperature range, methacrylic acid becomes the major product. This is interpreted as a dual decomposition route, involving the tetramethyl glycollide intermediate. Kinetic studies have shown that the decomposition is a first-order process and that the first-order rate constant k is related to temperature (T) by the expression: The results are interpreted in terms of an intramolecular ester interchange process involving tetramethyl glycollide as the primary decomposition product.     

Electrochemical reduction of G3-factor endoperoxide and its methyl ether: evidence for a competition between concerted and stepwise dissociative electron transfer

The reduction of the bicyclic G-factor endoperoxides G3 and G3Me was studied in N,N-dimethylformamide using cyclic voltammetry and convolution analysis. Electron transfer leads to irreversible cleavage of the O--O bond. Detailed analysis of the voltammetry curves reveals a non-linear dependence on the transfer coefficient indicating a mechanistic transition from a stepwise mechanism to one with more concerted character with increasing potential. By using quantum calculations to estimate the O--O bond dissociation energies, the experimental data was used to evaluate the standard reduction potentials and other pertinent thermochemical information.     

Fe(II)-induced transformation from ferrihydrite to lepidocrocite and goethite

The transformation of Fe(II)-adsorbed ferrihydrite was studied. Data tracking the formation of products as a function of pH, temperature and time is presented. The results indicate that trace of Fe(II) adsorbed on ferrihydrite can accelerate its transformation obviously. The products are lepidocrocite and/or goethite and/or hematite, which is different from those without Fe(II). That is, Fe(II) not only accelerates the transformation of ferrihydrite but also leads to the formation of lepidocrocite by a new path. The behavior of Fe(II) is shown in two aspects—catalytic dissolution-reprecipitation and catalytic solid-state transformation. The results indicate that a high temperature and a high pH(in the range from 5 to 9) are favorable to solid-state transformation and the formation of hematite, while a low temperature and a low pH are favorable to dissolution-reprecipitation mechanism and the formation of lepidocrocite. Special attentions were given to the formation mechanism of lepidocrocite and goethite.     

Dynamic NMR studies of ferrocenylsulphide-palladium(II) and -platinum(II) complexes

The stereodynamics of ferrocenylsulphide-palladium(II) and -platinum(II) complexes, Fe(C₅H₄SR)₂MX₂, (M = Pd^II, Pt^II; X = Cl, Br; R = Ph, i-Pr and i-Bu), have been examined by variable temperature NMR. At temperatures down to ca. ?100° C, the pyramidal inversion of the S atoms could be slowed down sufficiently to yield accurate energy data, while the reversal of the ferrocenophane ring remained fast on the NMR time scale. ΔG^≠ data for the S inversion process were in the range 47 to 65 kJ mol^?1 and were influenced to varying extents by the nature of the transition metal, the halogen, and the R substituent on the sulphur.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part I. Polymerization by metal halides: Penultimate effect

Methyl vinyl ether (MVE) was polymerized under various conditions by BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H catalysts. The effect of polymerization conditions on the steric structure of poly(methyl vinyl ether) (PMVE) was studied by NMR spectra. It was found that the triad isotacticity of PMVE decreased and the syndiotacticity and heterotacticity increased with increasing polarity of the solvent and increasing polymerization temperature. This result coincided with the qualitative conclusion estimated from softening point and infrared spectra. However, the variation of tacticity by the change of the polarity of a solvent was not so large as expected. There was no large difference between the behavior of BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H as catalysts. From the relation between the difference of free energy of monomer addition due to the steric structure of the polymer and the polymerization temperature, it was concluded that the penultimate effect really existed and was due to only the difference in enthalpy in the MVE–BF₃. O(C₂H₅)₂ or MVE–SnCl₄·CCl₃CO₂H systems. The penultimate effect was not greatly changed by the polymerization conditions in these systems.     

Separation and determination of methyl tert-butyl ether and its degradation products by a laboratory-constructed micro-cryogenic chromatographic oven.

A laboratory-made micro-cryogenic chromatographic oven was mainly improved in size, which was controlled at 6 x 6 x 2.5 cm. A thermoelectric system was used to cool the capillary column instead of the traditional liquid cryogen. A cold block connected to the cryogenic module was directly solidified at room temperature with thermally conductive adhesive so that the uniformity of transferring heat was greatly improved, and the size of the system was reduced. Moreover, this system was inexpensive and convenient for both operation and control. The newly developed device coupled with headspace solid-phase microextraction (SPME) was successfully applied to the determination of methyl tert-butyl ether (MTBE) and its degradation products. During the analysis procedure, a 65 microm polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber was used to extract MTBE and its degradation products. The extraction was controlled at 50 degrees C for 30 min and the NaCl content in the sample was maintained at 35%. The limits of detection (LODs) ranged from 0.006 microg mL(-1) (for MTBE) to 0.206 microg mL(-1) (for methyl acetate) and the relative standard deviations (RSD%) were below 4%. The spiked recoveries for the developed method were evaluated using various water samples as a matrix.     

Spin trapping studies of poly(methyl methacrylate) degradation in solution

Free radicals produced either by γ or ultrasonic irradiation of poly(methyl methacrylate) (PMMA) in benzene solution were stabilized by spin trapping; they were identified by analysis of ESR spectra of the trapped radicals (the spin adducts). The radical species identified after γ-irradiation were methyl, ester (COOCH₃), a pair of the chain scission radicals, ～CH₂C(CH₃)(COOCH₃) and CH₂C(CH₃)(COOCH₃)～, and phenyl radical originating from the solvent. The chain scission radicals were also detected by spin trapping after ultrasonic irradiation of the benzene solution. Taking account of the difference in the trapping rate for two spin trapping agents, 2,4,6-tri-t-butylnitrosobenzene (BNB) and penta-methyl-nitrosobenzene (PMNB) the radical species trapped by PMNB are assumed to be precursors of those trapped by BNB. Based on the radical species found by the spin trapping method, plausible degradation processes for PMMA in benzene solution are proposed.     

Predominance-zone diagrams of Fe(III) and Fe(II) sulfate complexes in acidic media. Voltammetric and spectrophotometric studies

A thermodynamic study based on concepts of generalized species and equilibria, was used to understand the distribution of Fe(III) and Fe(II) species in the Fe(III)/Fe(II)/H(2)SO(4)/H(2)O system. The two-dimensional predominance zone diagrams (TDPZ) and Pourbaix type diagrams thus obtained permitted the selection of optimum experimental conditions, to differentiate the chemical species involved in this system. The existence of the different predominant chemical species for Fe(III): Fe(3+), FeSO(+)(4) and Fe(SO(4))(-)(2) was evidenced by spectrophotometrical studies for pSO'(4) values from 4 to 0 units in a buffered solution of pH 0.5. Additionally, voltammetric studies performed on Pt, Au and carbon paste electrodes confirmed that the electron exchange between Fe(III) Fe(II) in H(2)SO(4) media occurs by an inner Helmholtz layer mechanism. It was also possible to show that the representative couples at pSO'(4) = 0 (buffered) are: (a) for pH < 0 FeSO (+)(4)FeHSO (+)(4) and (b) for pH > 1.0: Fe(SO (4)) (-)(2)FeHSO (+)(4). The last couple presents a coupled chemical reaction in the electrochemical mechanism; this reaction is associated with the different coordination numbers of Fe(III) and Fe(II).     

NMR studies of mononuclear octahedral Ni(II) complexes supported by tris((2-pyridyl)methyl)amine-type ligands

The recent discovery of acireductone dioxygenase (ARD), a metalloenzyme containing a mononuclear octahedral Ni(II) center, necessitates the development of model systems for evaluating the role of the metal center in substrate oxidation chemistry. In this work, three Ni(II) complexes of an aryl-appended tris((2-pyridyl)methyl)amine ligand (6-Ph(2)TPA, N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine), [(6-Ph(2)TPA)Ni(CH(3)CN)(CH(3)OH)](ClO(4))(2) (1), [(6-Ph(2)TPA)Ni(ONHC(O)CH(3))]ClO(4) (3), and [(6-Ph(2)TPA)Ni-Cl(CH(3)CN)]ClO(4) (4), and one Ni(II) complex of tris((2-pyridyl)methyl)amine, [(TPA)Ni(CH(3)CN)(H(2)O)](ClO(4))(2) (2), have been characterized in acetonitrile solution using conductance methods and NMR spectroscopy. In acetonitrile solution, 1-4 have monomeric cations that exhibit isotropically shifted (1)H NMR resonances. Full assignment of these resonances was achieved using one- and two-dimensional (1)H NMR techniques and (2)H NMR of analogues having deuteration of the supporting chelate ligand. COSY cross peaks were observed for pyridyl protons of the 6-Ph(2)TPA ligand in 1 and 3. This study lays the groundwork for using NMR methods to examine chemical reactions of 1 and 2 with model substrates of relevance to ARD.     

Solution NMR studies of iron(II) spin-crossover complexes

The 1H NMR spectra of a series of mono- and dinuclear pyridine complexes [FeL1(R1/R2)(py)2] and [Fe2L2(R1/R2)(py)4] have been investigated in a mixed toluene-d8/pyridine-d5 solution. The equatorial tetradentade Schiff base like ligands L1(R1/R2) and L2(R1/R2) with a N2O22- coordination sphere for each metal center have been obtained by condensation of a substituted malonodialdehyde (R1/R2 are Me/COOEt, Me/COMe, or OEt/COOEt) with o-phenylenediamine (L1(R1/R2)) or 1,2,4,5-tetraaminobenzene (L2(R1/R2)). The 1H NMR resonances were assigned by comparison of differently substituted complexes in combination with a line-width comparison. The 1H NMR shifts from 188 to 358 K show a strong influence of the spin state of the iron center. The behavior of the pure high-spin iron(II) complexes is close to ideal Curie behavior. Analysis of the resonance shifts of the spin-transition complexes can be used for determining the high-spin mole fraction of the complex in solution at different temperatures. Magnetic susceptibility measurements in solution using the Evans method were made for all six complexes. Significant differences between the spin-transition behavior of the complexes in solution of those in the solid state were found. However, the plots of microeff as a function of temperature obtained using the Evans method and those obtained by interpretation of the NMR shifts were virtually identical. The isotropic shifts of protons in the complexes proved to be suitable tools for following a spin transition in solution. Comparison of the microeff plots of the mono- and dinuclear complexes in solution reveals slight differences between the steepness of the curves that may be attributable to cooperative interactions between the metal centers in the case of the dinuclear complexes.     

NMR studies of transformations of aminoacid complexes of Pt(II) and Pd(II) in solution. 2. Bisalaninates

Synthetic procedures are suggested for diastereomers of Pt(II) and Pd(II) bischelates with alanine: cis- and trans-Pt(l-Ala)₂ , trans-Pt(l-Ala)fd-Ala), trans-Pd(l-Ala)₂ , and trans-Pd(l-Ala)(d-AIa). Methods of their isolation in individual solid state are proposed.¹H,¹³C, and¹⁹⁵Pt NMR spectral investigations are reported for the individual diastereomers and for M(Ala)₂ racemates in DMSO solution. The trans-isomers of Pd(II) bisalaninates in DMSO solution are transformed into an equilibrium mixture of cis- and trans-isomers. For Pt(II) complexes, the cis ↔ trans equilibrium was also found but the equilibration rate is much lower than that for Pd(II) bischelates for both cis- and trans-isomer. An equilibrium 2M(l-Ala)(d-Ala) ⇌ M(l-Ala)₂+M(d-Ala)₂ is also shown to exist. Translated fromZhurnal Strukturnoi Khimii, Vol. 41, No. 2, pp. 312–323, March–April, 2000.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part II. Polymerization by sulfuric acid–aluminum sulfate complex: Enantiomorphic catalyst sites model

Highly crystalline poly(methyl vinyl ether) (PMVE) was produced in toluene in a temperature range of 0 to ?20°C. with the use of sulfuric acid–aluminum sulfate complex (SA catalyst). It was found from the NMR spectra that these polymers contained more than 50% of the triad isotactic fraction and the melting point of the unfractionated polymer was about 130°C. However, PMVE containing a large amount of the isotactic fraction was insoluble in nitromethane, so the triad tacticity of highly crystalline PMVE could not be quantitatively determined. The molecular weight of PMVE increased with increasing conversion and increasing polymerization temperature. This behavior is different from that in metal halide catalysts. Also, the stereoregularity of PMVE decreased with increasing monomer concentration. However, addition of a polar solvent and increasing the polymerization temperature had little effect on the stereoregularity of the polymer. The increase in the isotactic fraction at high catalyst concentration and the difference in the monomer composition in the copolymerization of methyl vinyl ether with 2-chloroethyl vinyl ether by SA catalyst from that obtained by BF₃·O(C₂H₅)₂ suggest that the absorption of MVE on a catalyst surface is an important step in the propagation step by SA catalyst. The fraction of the triad tacticity calculated from the enantiomorphic catalyst sites model⁸ coincided with the experimental results. This fact shows that the steric structure of the adding monomer is determined only by the nature of the catalyst irrespective of the nature of a growing chain end. It is concluded, on considering also the results of the previous paper, that completely different factors can control the steric structure of a polymer even for the same monomer when different catalysts are used.     

Efficient Fe(III)/Fe(II) cycling triggered by MoO2 in Fenton reaction for the degradation of dye molecules and the reduction of Cr(VI)

There is a relatively low efficiency of Fe(III)/Fe(II) conversion cycle and H₂O₂ decomposition (<30%) in conventional Fenton process, which further results in a low production efficiency of OH and seriously restricts the application of Fenton. Herein, we report that the commercial MoO₂ can be used as the cocatalyst in Fenton process to dramatically accelerate the oxidation of Lissamine rhodamine B (L-RhB), where the efficiency of Fe(III)/Fe(II) cycling is greatly enhanced in the Fenton reaction meanwhile. And the L-RhB solution could be degraded nearly 100% in 1 min in the MoO₂ cocatalytic Fenton system under the optimal reaction condition, which is apparently better than that of the conventional Fenton system (～50%). Different from the conventional Fenton reaction where the OH plays an important role in the oxidation process, it shows that ¹O₂ contributes most in the MoO₂ cocatalytic Fenton reaction. However, it is found that the exposed Mo⁴⁺ active sites on the surface of MoO₂ powders can greatly promote the rate-limiting step of Fe³⁺/Fe²⁺ cycle conversion, thus minimizing the dosage of H₂O₂ (0.400 mmol/L) and Fe²⁺ (0.105 mmol/L). Interestingly, the MoO₂ cocatalytic Fenton system also exhibits a good ability for reducing Cr(VI) ions, where the reduction ability for Cr(VI) reaches almost 100% within 2 h. In short, this work shows a new discovery for MoO₂ cocatalytic advanced oxidation processes (AOPs), which devotes a lot to the practical water remediation application.     

Multinuclear NMR studies of lead(II) soaps II. 13C and 1H studies of solid and liquid-crystalline phases

The solid and liquid-crystalline phases of two long chain lead(II) carboxylates have been studied by ¹³C and ¹H NMR spectroscopy. High resolution ¹³C NMR spectra of the solid phase of lead(II) decanoate and octadecanoate, reveal splittings of the peaks attributed to the carboxylate and adjacent methylene groups. This may result from two different environments for the carboxylate chains coordinated to the same Pb(II) ion. On going from the solid to liquid-crystalline or liquid phases, this splitting is lost, and small changes in chemical shift of the bands due to the methyl and methylene groups are observed. These are attributed to the onset of conformational disordering, and analysis of the data gives a gauche population in good agreement with that from Raman spectra and theoretical calculations. Longitudinal ¹³C relaxation times are reported. From these, and from spectral data, the -CH₃ group is seen to have different dynamics from the rest of the chain, and to retain high mobility even in the solid phase. Further information on the structural changes comes from proton NMR spectroscopy. The transverse ¹H relaxation of lead(II) decanoate shows two components, which are suggested to arise from a crystalline, and a relatively amorphous region of the compound. Study of the evolution of these as a function of temperature shows that the amorphous fraction is relatively low up to 335 K. but then increase rapidly, until at 365 K, close to the transition to the L, phase, it is 99 per cent- In parallel to these observations, changes in band shape were also observed and suggest a progressive fusion of the chains up to the temperature of this transition. The global ¹H spin-lattice relaxation was also studied as a function of temperature. and two components were observed between room temperature and approximately the tint phase transition. These are associated with populations of hydrogen nuclei with different mobilities.     

Di-isotacticity of poly(methyl propenyl ether) and double-bond opening of methyl propenyl ether in cationic polymerization

The di-isotacticity of poly(methylpropenyl ether) obtained by the cationic polymerization has been studied by NMR spectra. The NMR spectra of β-methyl protons of the polymer are decoupled from the β-methine proton spectra to determine the di-isotactic fraction in a polymer. The signals of β-methyl protons at 8.78 and 8.89 τ are estimated as spectra based on threo- and erythro-di-isotactic diads, respectively. With BF₃·O(C₂H₅)₂ as a catalyst, the trans monomer yields a crystalline polymer and its structure is threo-di-isotactic. Otherwise, cis monomer produces an amorphous polymer, and it is a mixture of threo- and erythro-di-isotactic structure. From these results, it is concluded that the double bond in trans monomer is opened exclusively in the cis type, and in cis monomer cis- and trans-openings take place at almost the same rate.