Supramolecular discotic liquid crystals from wedge‐shaped diacetylenes and their polymerization

Wedge‐shaped diacetylenic compounds were synthesized by the amidation reaction between the linear diacetylenic side groups and 5‐acetamidoisophthalic acid. The compounds showed enantiotropic transitions. In the liquid‐crystalline states, they were dimerized via hydrogen bonding of acetamide groups, forming disklike supramolecules and had rectangular columnar phases. Polymerization was carried out by UV irradiation and thermal annealing at their mesophase temperatures, giving polydiacetylenes. After polymerization, the compounds became dark red, but their textures were still birefringent. The IR and ultraviolet–visible study demonstrated that the polymerization proceeded topochemically by 1,4‐addition. X‐ray analysis showed that the UV‐polymerized samples maintained rectangular columnar phases. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1881–1891, 2003     

Synthesis of supramolecular polymers by ionic self-assembly of oppositely charged dyes

A new type of supramolecular polymer was prepared by ionic self-assembly (ISA) from two oppositely charged dyes; a perylenediimide and a copper-phthalocyanine derivative. Coulomb coupling stabilizes the whole structure, and a combination of charge-transfer interactions and discotic stacking facilitates the exclusive formation of one-dimensional polymeric chains. The supramolecular dye-polymers have a large association constant (2.4 x 10(7) L mol(-1)), high molecular weight, and high mechanical stability. The use of cryo-transmission electron microscopy (cryo-TEM) confirmed the existence of extended fibers of width 2.4 nm. Further image analysis revealed slight undulation and faint segmentation of the fibers, and density maxima were observed at a regular interval of 3.6 nm along the fiber axis. The fiber-like structure (and aggregate of fibers) is also found in the solid state, as shown by the results of mineralization contrasting experiments, atomic force microscopy (AFM), and X-ray analyses. A structural model is proposed, in which the structural subunits, arranged in a side-by-side conformation, form a stacked structure.     

Combination self-assembly of β-sheet peptides and carbon nanotubes: functionalizing carbon nanotubes with bioactive β-sheet block copolypeptides

Understanding the self-assembly behavior of β-sheet peptides is important, not only in constructing bioactive peptide nanostructures, but also in inhibiting uncontrollable protein aggregation in protein-misfolding diseases. Here, the first systematic investigation of combination self-assembly between β-sheet block copolypeptides and CNTs is presented, demonstrating the presence of several different association modes during the combination self-assembly process. Bioactive β-sheet block copolypeptides can self-assemble by themselves, or can be used to functionalize CNT hybrids depending on the situation. This behavior may be important both for fabricating bioactive peptide/CNT hybrids and for controlling/inhibiting protein-misfolding diseases.     

Double-helical ultrastructure of polycationic dendronized polymers determined by single-particle Cryo-TEM

The ultrastructure of cationic dendronized polymers (denpols) of third and fourth generations (PG3 and PG4) in water was determined by using single-particle cryo-transmission electron microscopy (cryo-TEM). At concentrations in the region of 50 mg L(-1), networks of double-stranded fibers were revealed that exhibit well-defined diameters of 5.9 nm+/-0.4 nm for PG3 and 7.4 nm+/-0.4 nm for PG4. The structure varies with progression along the fibers, and includes a double helix with a pitch of 7.0+/-0.4 nm for PG3 and 9.0+/-0.4 nm for PG4. The formation of the double strands is attributed to the hydrophobic effect and limited crowding in the dendron shell of the third and fourth generation denpols investigated. From solutions of lower concentrations (around 10 mg L(-1)), isolated molecular fibers were adsorbed onto high-energy surfaces and examined by performing scanning force microscopy (SFM) on mica, and after staining, TEM on glow-discharged carbon films. In both cases, characteristic undulations of single strands were observed, which are attributed largely to the adsorption process.     

Self‐assembly of supramolecular polymers into tunable helical structures

There is growing interest in the design of synthetic molecules that are able to self‐assemble into a polymeric chain with compact helical conformations, which is analogous to the folded state of natural proteins. Herein, we highlight supramolecular approach to the formation of helical architectures and their conformational changes driven by external stimuli. Helical organization in synthetic self‐assembling systems can be achieved by the various types of noncovalent interactions, which include hydrogen bonding, solvophobic effects, and metal‐ligand interactions. Since the external environment can have a large influence on the strength and configuration of noncovalent interactions between the individual components, stimulus‐induced alterations in the intramolecular noncovalent interactions can result in dynamic conformational change of the supramolecular helical structure thus, driving significant changes in the properties of the materials. Therefore, these supramolecular helices hold great promise as stimuli‐responsive materials. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1925–1935, 2008     

Vicinal Solvent Effect on Supramolecular Gelation: Alcohol Controlled Topochemical Reaction and the Toruloid Nanostructure

Although solvent is the major component of the gel, it still remains unclear how the solvent molecules take part in the formation of the gel nanostructures in many gels. In this study it was observed that the vicinal effect on gel formation as well as their nanostructures, that is, the vicinal solvent molecules to the gelator, determine the molecular packing and their subsequent structures and properties. A naphthylacryl‐conjugated L ‐glutamide gelator was found to form organogels in various solvents and nanofiber structures. While the nanofibers from other solvents could not show any further reaction, the gel from the alcohol could undergo topochemical [2+2] cycloaddition under photoirradiation and resulted in toruloid nanostructures. Various pure alcohol solvents from methanol to pentanol were found to show a similar property. Interestingly, switching from a single alcohol solvent to mixed solvents of alcohol with miscible or immiscible non‐alcohol solvents could still cause the same change, showing the vicinal effect of alcohol on controlling the molecular packing as well as the structural transformation. More interestingly, when nanofiber xerogel, obtained from non‐alcohol solvents, was exposed to alcohol vapor, the nanofiber was transferred into nanotoruloid. These results provide a new insight into the gelator–solvent interaction in soft gels.     

Folding control in cyclic peptides through N-methylation pattern selection: formation of antiparallel beta-sheet dimers, double reverse turns and supramolecular helices by 3alpha,gamma cyclic peptides

Peptide foldamers constitute a growing class of nanomaterials with potential applications in a wide variety of chemical, medical and technological fields. Here we describe the preparation and structural characteristics of a new class of cyclic peptide foldamers (3alpha,gamma-CPs) that, depending on their backbone N-methylation patterns and the medium, can either remain as flat rings that dimerize through arrays of hydrogen bonds of antiparallel beta-sheet type, or can fold into twisted double reverse turns that, in the case of double gamma-turns, associate in nonpolar solvents to form helical supramolecular structures. A 3alpha,gamma-CP consists of a number of multiples of a repeat unit made up of four amino acid residues of alternating chirality: three corresponding to alpha-amino acids and one to a gamma-amino acid (a cis-3-aminocycloalkanecarboxylic acid).     

CO2 in supramolecular chemistry: preparation of switchable supramolecular polymers

CO2 gas was used to construct novel types of supramolecular polymers. Self-assembling nanostructures 11 and 13 were prepared, which employ both hydrogen bonding and dynamic, thermally reversible carbamate bonds. As precursors, calixarene ureas 1 and 2 were synthesized, which strongly aggregate/dimerize (K(D)>/=10(6) M(-1) per capsule) in apolar solution with the formation of self-assembling capsules 7 and linear polymeric chains 8, respectively, and also possess "CO2-philic" primary amino groups on the periphery. CO2 effectively reacts with molecules 7 and 8 in apolar solvents and cross-links them with the formation of multiple carbamate salt bridges. Oligomeric aggregate 11 and three-dimensional polymeric network 13 were prepared and characterized by 1H and 13C NMR spectroscopy. The morphology of supramolecular gel 13 was studied by scanning electron microscopy. Addition of a competitive solvent destroyed the hydrogen bonding in assembling structures 11 and 13, but did not influence the carbamate linkers; carbamate salts 12 and 14, respectively, were obtained. On the other hand, thermal release of CO2 from 11 and 13 was easily accomplished (1 h, 100 degrees C) while retaining the hydrogen-bonding capsules. Thus, three-dimensional polymeric network 13 was transformed back to linear polymeric chain 8 without breaking up. Encapsulation and storage of solvent molecules by 11 and 13 was demonstrated. This opens the way for switchable materials, which reversibly trap, store, and then release guest molecules. A two-parameter switch and control over hydrogen bonding and CO2-amine adducts was established.     

Organogelation‐Controlled Topochemical [2+2] Cycloaddition and Morphological Changes: From Nanofiber to Peculiar Coaxial Hollow Toruloid‐Like Nanostructures

Novel amphiphilic molecules composed of naphthylacryl and L ‐glutamide moieties (1‐NA and 2‐NA) have been designed and their organogel formation in various organic solvents as well as their self‐assembled nanostructures have been investigated. Both compounds formed organogels in many organic solvents, ranging from nonpolar to polar, and self‐assembled into essentially nanofiber structures, although some twist or belt structures could be observed in certain solvents. A gel of compound 2‐NA in ethanol initially self‐assembled into nanofibers and then these were transformed into a family of coaxial hollow toruloid‐like (CHTL) nanostructures under irradiation, in which various toroids and disks of different sizes were stacked coaxially. We have established that a topochemical [2+2] cycloaddition in the organogel triggers this transformation. When the gel was fabricated into xerogels in which no ethanol remained, such morphological changes could not happen. This might be the first report of an organogel, in which both organized nanofibers and solvent coexist, controlling a topochemical reaction as well as the self‐assembled nanostructures formed. Due to the formation of the toruloid‐like nanostructures, the gel collapsed to a precipitate. However, upon heating this precipitate with ethanol, it redissolved and then formed a gel and self‐assembled into nanofibers once more. Thus, a reversible morphological transformation between nanofibers and an unprecedented series of toruloid‐like nanostructures can be induced by alternately heating and irradiating the gel.     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

Hydrogen‐bonded supramolecular polymers containing dimethylsilane groups: Synthesis,crystal structure,and characterization

Bis[N‐(4‐carboxyphenyl)phtalimidyl]dimethylsilane prepared by the reaction between bis(3,4‐dicarboxyphenyl)dimethylsilane anhydride and p‐aminobenzoic acid has been used to built three novel hydrogen‐bonded supramolecular polymers as a result of cocrystallization with pyridine derivatives: 4,4′‐bipyridyl ( SP1 ), 1,2‐bis(4‐pyridyl)ethylene ( SP2 ), and 4,4′‐azopyridine ( SP3 ). The structures of the dianhydride, diacid, and derived supramolecular polymers were investigated by Fourier transform infrared (FTIR) and proton magnetic resonance (¹H NMR) spectroscopy. Self‐assembling was proved by the presence of the IR absorption bands around 1900 and 2400 cm^?1 specific for hydrogen bond. The association constant values were estimated by using FTIR spectroscopy in solid state. According to X‐ray diffraction study, the bis(3,4‐dicarboxyphenyl)dimethylsilane anhydride ( 1 ) has an isolated molecular structure. Bis[N‐(4‐carboxyphenyl)phtalimidyl]dimethylsilane ( 2 ) molecules are associated in the crystal structure via dimeric O? H … O hydrogen bonds resulting in the wavy 1D supramolecular chain. The main packing motif for SP1 and SP3 is represented by wavy chain formed by alternating sequences of 4,4′‐bipyridyl or 4,4′‐azopyridine and bis[N(4‐carboxyphenyl)phtalimidyl]dimethylsilane molecules linked by O? H … N hydrogen bonds. Thermal behavior was studied by differential scanning calorimetry and thermogravimetric analysis. The ability for the structuration in film was emphasized by atomic force microscopy. The molecular transport ability of the reversible associations was estimated by dynamic water vapor sorption (DVS) analysis. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Organogold(III) supramolecular polymers for anticancer treatment

Gold cures: the depicted gold(III) complex self-assembles into supramolecular polymers which form nanofibrillar networks that display sustained cytotoxicity and can also act as carriers for other cytotoxic agents.     

Preparation by controlled radical polymerization and self‐assembly via base‐recognition of synthetic polymers bearing complementary nucleobases

The radical polymerization of three monomers bearing nucleobases 1‐(4‐vinylbenzyl)thymine (VBT), 1‐(4‐vinylbenzyl)uracil (VBU) and 9‐(4‐vinylbenzyl)adenine (VBA) was investigated. The corresponding homopolymers could be prepared in high yields via conventional radical polymerization. However, the resulting polymers were found to be only soluble in a few polar solvents. On the other hand, copolymers of dodecyl methacrylate (DMA) with either VBT or VBA could be prepared via both free radical polymerization and atom transfer radical polymerization and could be dissolved in a large variety of organic solvents. Moreover, the formed complementary copolymers P(VBT‐co‐DMA) and P(VBA‐co‐DMA) were found to self‐assemble in dilute solutions in dioxane or chloroform via base recognition, as evidenced by a significant hypochromicity effect in UV spectroscopy. Nevertheless, at higher concentrations in chloroform, both dynamic light scattering and optical microscopy indicate that P(VBT‐co‐DMA), P(VBA‐co‐DMA), or P(VBT‐co‐DMA)/P(VBA‐co‐DMA) mixtures spontaneously self‐assemble into micron size spherical aggregates. ¹H NMR and FTIR studies confirmed that the self‐assembly process is driven in all cases via H‐bond formation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4805–4818, 2005     

Two-Dimensional polymerization of supramolecular assemblies: Synthesis and bilayer polymerization of lipids containing α-methylene-substituted acyl chains

Polymerization of lipid assemblies may be usefully employed to alter the properties of the assemblies. The possible locations of the reactive group in the lipids include (1) the chain terminus, (2) the head group, and (3) near the lipid backbone. The third strategy yields polymerized assemblies which retain their head group functionality and lipid chain motion. We have designed and synthesized new members of this later category by the use of 2-methylene-substituted acyl chains. The main transition temperature (T_m) from gel to liquid crystalline phase of hydrated bilayers of 1-palmitoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 1 ) and the disubstituted 1,2-bis(2-methylenepalmitoyl)-sn-glycero-3-phosphocholine ( 2 ) were 33.6 and 25.3°C, respectively. The T_m of the mono-substituted 1-oleoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 3 ) bilayers was detected in a range from ?15 to ?10°C by x-ray diffraction. Hydrated bilayers of each individual lipid were successfully polymerized with a water-soluble initiator, azobis(2-amidinopropane) dihydrochloride (AAPD). These results indicate the lipid 2-methylene groups are accessible to the water interface. Thermal polymerization of the mono-substituted lipids in aqueous suspensions with AAPD, yielded oligomers. However the bis-2-methylene PC ( 2 ) was successfully polymerized to yield stabilized crosslinked bilayers. © 1994 John Wiley & Sons, Inc.