The question of the production of Plantaglyutsid

The stage of extracting Plantaglyutsid from the leaves of rippleseed platain has been optimized by the methods of mathematical statistics. Information has been obtained on the optimum parameters of performing the process, as a result of which the yield of desired product has been increased and the amount of energy used and the consumption of extractant have been decreased.     

The question of the production of Plantaglyutsid

The stage of extracting Plantaglyutsid from the leaves of rippleseed platain has been optimized by the methods of mathematical statistics. Information has been obtained on the optimum parameters of performing the process, as a result of which the yield of desired product has been increased and the amount of energy used and the consumption of extractant have been decreased.Tahskent Pharmaceutical Institute. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 735–737, November–December, 1985.     

Chemical precipitation of sulfur nanoparticles from aqueous solutions

Process of formation and coarsening of sulfur nanoparticles deposited from aqueous solutions of calcium and sodium polysulfides and sodium thiosulfate and from solutions of elementary sulfur in a mixture of hydrazine hydrate and monoethanolamine was considered. The sulfur nanoparticles were characterized with a laser analyzer of particle sizes, X-ray diffraction analysis, and electron probe microscopy. It was shown that the sizes of primary particles strongly depend on the concentration of an acid and on the molar ratio between the sulfur-containing solutions and the acid. The antifungal effects of sulfur with nano- and micrometer dimensions were compared. The experimental results demonstrated a strong antifungal effect of sulfur nanoparticles on various kinds of fungi.     

Hydroxyapatite nanoparticle prepared by controlled precipitation from aqueous phase

Hydroxyapatite nanoparticles (NPs) were prepared by controlled precipitation in the presence of stabilizers that confined growth and inhibited the aggregation of nanoparticles. Electrostatically stabilized NPs were prepared in the presence of sodium citrate; Tween 80 was used for steric stabilization. At low stabilizer concentrations, nanorods were formed of grown together, spheroidal hydroxyapatite NPs of ~20 nm in diameter. The rod length decreased as ether sodium citrate or Tween 80 concentration increased. When Cit^3–/Ca²⁺ = 3mol/mol, platelike NPs were formed 20–45 nm long and ~10 nm wide; for Cit^3–/Ca²⁺ = 4 mol/mol, NPs had sizes of 10–15 nm. At relatively high Tween 80 concentrations (>0.05 mol/L), foamlike structures were obtained.     

Silicate-substituted carbonated hydroxyapatite powders prepared by precipitation from aqueous solutions

The powders of silicate-substituted carbonated hydroxyapatites were prepared by a precipitation method from aqueous alkaline solutions with a varied sodium silicate content. With the use of physicochemical techniques, it was established that the solid phase included to 7.36 wt % silicate ions and to 7.34 wt % carbonate ions under the test conditions. The nature of processes occurring on the thermal treatment of the samples depends on the Ca/P and Ca/(P + Si) molar ratios and the concentration of SiO₄ groups. A study of the behavior of solid phases on contact with a solution of NaCl (0.9 mol %) showed that the rates of dissolution of all of the silicon-containing samples were higher than that of unsubstituted hydroxyapatite species by a factor of 2–4 because of the active participation of silicates in the resorption of the materials.     

Removal of lead from aqueous solutions by adsorption with surface precipitation

An activated carbon from Coconut (Cocos nucifera) shells was prepared by physical activation with carbon dioxide and water vapor. The activated carbon obtained has a surface area of 1058 m² g^?1 and such a high micropore volume of 0.49 cm³ g^?1. This carbon was studied for the removal of lead from water. Sorption studies were performed at 30 °C, at different pH and adsorbent doses, in batch mode. Lead precipitation was observed on the surface of the activated carbon. Maximum adsorption occurred at pH 9 for an adsorbent dose of 2 g L^?1. Kinetic studies, at the initial concentration of 150 mg L^?1 of lead, pH 5 and an adsorbent dose of 1 g L^?1, yielded an equilibrium time of 50 h for this activated carbon. The kinetic data were modeled with the pseudo first order, the pseudo second order and the Bangham models. The pseudo second order model fitted the data well. The sorption rate constant (7 × 10^?4 mol^?1 Kg s^?1) and the maximum amount of lead adsorbed (0.23 mol kg^?1) are quite good compared to the data found in literature. Sorption equilibrium studies were conducted in a concentration range of lead from 0 to 150 mg L^?1. In an aqueous lead solution with an initial concentration of 30 mg L^?1, at pH 5, adsorbent dose 1 g L^?1, activated Coconut shell carbon removed at equilibrium 100 % of the heavy metal. The equilibrium data were modeled with the Langmuir and Freundlich equations, of which the former gave the best fit. The Langmuir constants Q_{max eq} (0.23 mol kg^?1) and K_L (487667 L mol^?1) are in good agreement with literature. XPS studies identified adsorbed species as lead carbonates and/or lead oxalates and precipitates as lead oxide and/or lead hydroxide on the activated carbon surface. The Coconut shell activated carbon is a very efficient carbon due to its high surface area, to the presence of many micropores on its surface and to the presence surface groups like hydroxyls promoting adsorption in the porous system and lead crystal precipitation on the activated carbon surface.     

Efficient precipitation of dyes from dilute aqueous solutions of ionic liquids.

The addition of only approximately 1.7 wt% (approximately 0.06 M) ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate to aqueous solutions of six popular cationic dyes resulted in the precipitation of almost all of the dye from the solution.     

Polyaniline precipitation in aqueous medium: from bulk aggregates to nanoparticles

A postsynthetic self-assembly system was designed to investigate a construction process from suspended polyaniline (PANI) molecules to condensed aggregates. The conventionally synthesized PANI was dissolved in polar solvent and introduced into acidic medium with electrolytes similar to the aniline chemical oxidative polymerization (COP) medium. In this way, reaction interference that is usually encountered in the COP process could be avoided, and influences of medium conditions including organic electrolytes on the self-assembly behaviors of PANI were studied. It was discovered that, in a static aqueous medium with moderate pH and rich electrolytes, PANI molecules composed of bulk aggregates could self-assemble into well-dispersed nanoparticles with few structural changes. Electrostatic force is considered to dominate the self-assembly of PANI molecules as compared with other noncovalent interaction or the effect of soft templates such as ionic liquid and surfactant. The results are supposed to provide better understanding on the formation mechanism of micro/nanostructured PANI.     

Thermal behaviour of titanium dioxide nanoparticles prepared by precipitation from aqueous solutions

Thermogravimetry-differential thermal analysis, emanation thermal analysis, mass spectrometry detection, Fourier transform infrared and XRD were used to characterize thermal behaviour of titanium dioxide photocatalyst precursors prepared by precipitation at various conditions from peroxotitanic acid sols. The transmission electron microscopy HRTEM technique was used to characterize the surface microstructure. The sols contained TiO₂ anatase particles of approximately 10 nm in diameter. During heating of the air dried samples, their chemical degradation took place giving rise to anatase. On further heating, the crystallization of anatase and formation of rutile phase was observed. To test the photocatalytic activity of the samples, the decomposition of 4-chlorophenol (4-CP) under ultraviolet and visible irradiation was monitored. It was shown that photocatalytic activities of the samples are comparable to the Degussa P25 photocatalyst reference material.     

Electrostimulated shift of the precipitation temperature of aqueous polyzwitterionic solutions

The precipitation temperature (T_pr) value of aqueous poly(dimethylamino-ethoxyacryloyl-propylsulphonate) (PDMAPS) solutions decreases with the rise of electric field intensity both in the absence and in the presence of a low molecular salt. This electrostimulated T_pr shift is explained qualitatively by means of the model taking into account both the dominating intermacromolecular dipole-dipole interaction and the dipole cluster formation.     

CZE for the speciation of arsenic in aqueous soil extracts

We developed two separation methods using CZE with UV detection for the determination of the most common inorganic and methylated arsenic species and some phenylarsenic compounds. Based on the separation method for anions using hydrodynamic sample injection the detection limits were 0.52, 0.25, 0.27, 0.12, 0.37, 0.6, 0.6, 1.2 and 1.0 mg As/L for phenylarsine oxide (PAO), p-aminophenylarsonic acid (p-APAA), o-aminophenylarsonic (o-APAA), phenylarsonic acid (PAA), 4-hydroxy-3-nitrobenzenearsonic acid (roxarsone), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenite or arsenious acid (As(III)) and arsenate (As(V)), respectively. These detection limits were improved by large-volume sample stacking with polarity switching to 32, 28, 14, 42, 22, 27, 26 and 27 microg As/L for p-APAA, o-APAA, PAA, roxarsone, MMA, DMA, As(III) and As(V), respectively. We have applied both methods to the analysis of the arsenic species distribution in aqueous soil extracts. The identification of the arsenic species was validated by means of both standard addition and comparison with standard UV spectra. The comparison of the arsenic species concentrations in the extracts determined by CZE with the total arsenic concentrations measured by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) indicated that CZE is suited for the speciation of arsenic in environmental samples with a high arsenic content. The extraction yield of phenylarsenic compounds from soil was derived from the arsenic concentrations of the aqueous soil extracts and the total arsenic content of the soil determined by ICP-AES after microwave digestion. We found that 6-32% of the total amount of arsenic in the soil was extractable by a one-step extraction with water in dependence on the type of arsenic species.     

Activity antifungal of the essential oils; aqueous and ethanol extracts from Citrus aurantium L.

Our study is about the essential oil of Citrus aurantium L. in Tunisia and its plant extract. The yield of this essential oil is 0, 56% but the yield of the extract of plant was 17.1% for the aqueous extract ant 18.3% for the ethanolic extract. The analysis of chemical composition by using GC and GC/MS showed the essential oil of C. aurantium L. species to be rich in monoterpenes such as α-terpineol, lianolyl acetate, linalool and limonene. The antifungal activity of this oil showed us an inhibition of the germination of mushrooms, in the same way we could note that the biologic activities are generally assigned to the chemotypes high content in oxygenated monoterpene.     

The hydrolytic precipitation reaction of Mg(II) from aqueous NaNO3 solution

An equilibrium study has been made of the hydrolytic precipitation reaction of Mg(II) in 1.0 mol dm⁻³ aqueous NaNO₃ solution at 25.0°C by measurements of the free hydrogen ion concentration by a potentiometric method and of the dissolved Mg(II) by a complexometric method. Under the condition that the solution is saturated with precipitated Mg(II) hydroxide, such species as Mg²⁺, Mg₂(OH)₂²⁺, Mg₃(OH)₄²⁺ and Mg(OH)₂ may be present; their stability constants and solubility products were determined. A scheme for the hydrolytic precipitation equilibria of Mg(II) is presented.     

Surface precipitation of highly porous hydrotalcite-like film on Al from a zinc aqueous solution

A hydrotalcite-like film has been successfully deposited on an Al-bearing glass substrate based on an interface reaction between an Al layer and a zinc aqueous solution. The film selectively grew on the Al surface but not on the glass surface. The film on Al was composed of layered nanosheets of a hydrotalcite-like compound containing Al and Zn. Comparably, deposits on the plastic surface and precipitates in solution were wurzite-type ZnO with various morphologies depending upon the preparation conditions. At low supersaturation degrees, single crystals and superstructures of Zn-Al hydrotalcite were also obtained. This porous hydrotalcite film has a potential application as catalyst supports, environmental materials, or matrixes for hydrotalcite-based nanocomposite films. Using Al as a reaction interface makes it easy to coat porous hydrotalcites on a series of matrix materials varying in shapes and properties, which is important for achieving practical applications. In addition, the method developed should be widely applicable to other systems for the preparation of porous or oriented hydrotalcite-like thin films by an appropriate combination of divalent/trivalent solution-substrate systems.     

The chemical composition of aqueous extracts of coniferous needles

Summary 1. The group compositions of aqueous extracts of pine and spruce needles have been established. In their chemical compositions the extracts are similar to one another.2. The individual composition of the monosaccharides have been determined. They contain glucose, mannose, galactose, xylose, and arabinose.3. The component compositions of the vitamins have been studied. Ascorbic acid and vitamins of the B group have been found such as inositol, biotin, nicotinic and pantothenic acids, and vitamins B₁ and B₆.Siberian Technological Institute, Krasnoyarsk. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 648–650, September–October, 1978.     

Simulation of the precipitation of calcium phosphates,sulfates, and carbonates from aqueous solutions of complex composition

The isothermal evaporation of aqueous solutions containing calcium, magnesium, and sodium carbonates, phosphates, sulfates, and chlorides was studied by physiochemical simulation methods. The equilibrium composition of the Ca(HCO₃)₂-Mg(HCO)₂-H₃PO₄-H₂SO₄-NaCl-CO₂-H₂O system was calculated for T = 25°C, pCO₂ = 10^?1 ? 10³ Pa, pH 7.7–9.4, solution concentration factors of 1–10, H₂SO₄ concentrations of 10^?4?9 × 10^?4 mol/(kg H₂O), an H₃PO₄ concentration of 2 × 10^?5 mol/(kg H₂O), and a NaCl concentration of 10^?3 mol/(kg H₂O). Conditions were determined for calcium precipitation as calcite, dolomite, gypsum, and hydroxylapatite. The results of simulation were used in the development of commercial-scale methods for stabilizing cooling solutions in circulating water supply systems.     

Photochemical precipitation of thorium and cerium and their separation from other ions in aqueous solution

Thorium was precipitated from homogeneous solution by exposing solutions of thorium and periodate in dilute perchloric acid to 253.7 nm radiation from a low-pressure mercury lamp. Periodate is reduced photochemically to iodate which causes the formation of a dense precipitate of the basic iodate of thorium(IV). The precipitate was redissolved, the iodate reduced, the thorium precipitated first as the hydroxide, then as the oxalate and ignited to the dioxide for weighing. Thorium(IV) solutions containing 8-200 mg of ThO(2) gave quantitative results with a standard deviation (s) of 0.2 mg. Separations from 25 mg each of iron, calcium, magnesium, 50 mg of yttrium and up to 500 mg of uranium(VI) were quantitative (s = 0.25 mg). Separations from rare earths, except cerium, were accomplished by using hexamethylenetetramine rather than ammonia for the precipitation of the hydroxide. Cerium(III) was similarly precipitated and converted into CeO(2) for weighing. Quantitative results were obtained for 13-150 mg of CeO(2) with a standard deviation of 0.2 mg. Separations from 200 mg of uranium were quantitative. Other rare earths and yttrium interfered seriously. The precipitates of the basic cerium(IV) and thorium iodates obtained are more compact than those obtained by direct precipitation and can be handled easily. Attempts to duplicate Suzuki's method for separating cerium from neodymium and yttrium were not successful.