Production of lactic acid from cheese whey by batch and repeated batch cultures of Lactobacillus sp. RKY2

The fermentative production of lactic acid from cheese whey and corn steep liquor (CSL) as cheap raw materials was investigated by using Lactobacillus sp. RKY2 in order to develop a cost-effective fermentation medium. Lactic acid yields based on consumed lactose were obtained at more than 0.98 g/g from the medium containing whey lactose. Lactic acid productivities and yields obtained from whey lactose medium were slightly higher than those obtained from pure lactose medium. The lactic acid productivity gradually decreased with increase in substrate concentration owing to substrate and product inhibitions. The fermentation efficiencies were improved by the addition of more CSL to the medium. Moreover, through the cell-recycle repeated batch fermentation, lactic acid productivity was maximized to 6.34 g/L/h, which was 6.2 times higher than that of the batch fermentation.     

Succinic Acid Production from Cheese Whey using Actinobacillus succinogenes 130 Z

Actinobacillus succinogenes 130 Z was used to produce succinic acid from cheese whey in this study. At the presence of external CO₂ supply, the effects of initial cheese whey concentration, pH, and inoculum size on the succinic acid production were studied. The by-product formation during the fermentation process was also analyzed. The highest succinic acid yield of 0.57 was obtained at initial cheese whey concentration of 50 g/L, while the highest succinic acid productivity of 0.58 g h⁻¹ L⁻¹ was obtained at initial cheese whey concentration of 100 g/L. Increase in pH and inoculum size caused higher succinic acid yield and productivity. At the preferred fermentation condition of pH 6.8, inoculum size of 5% and initial cheese whey concentration of 50 g/L, succinic acid yield of 0.57, and productivity of 0.44 g h⁻¹ L⁻¹ were obtained. Acetic acid and formic acid were the main by-products throughout the fermentation run of 48 h. It is feasible to produce succinic acid using lactose from cheese whey as carbon resource by A. succinogenes 130 Z.     

Conditions that promote production of lactic acid byZymomonas mobilis in batch and continuous culture

This study documents the similar pH-dependent shift in pyruvate metabolism exhibited byZymomonas mobilis ATCC 29191 and ATCC 39676 in response to controlled changes in their steady-state growth environment. The usual high degree of ethanol selectivity associated with glucose fermentation by Z.mobilis is associated with conditions that promote rapid and robust growth, with about 95% of the substrate (5% w/v glucose) being converted to ethanol and CO₂, and the remaining 5% being used for the synthesis of cell mass. Conditions that promote energetic uncoupling cause the conversion efficiency to increase to 98% as a result of the reduction in growth yield (cell mass production). Under conditions of glucose-limited growth in a chemostat, with the pH controlled at 6.0, the conversion efficiency was observed to decrease from 95% at a specific growth rate of 0.2/h to only 80% at 0.042/h. The decrease in ethanol yield was solely attributable to the pH-dependent shift in pyruvate metabolism, resulting in the production of lactic acid as a fermentation byproduct. At a dilution rate (D) of 0.042/h, decreasing from pH 6.0 to 5.5 resulted in a decrease in lactic acid from 10.8 to 7.5 g/L. Lactic acid synthesis depended on the presence of yeast extract (YE) or tryptone in the 5% (w/v) glucose-mineral salts medium. At D = 0.15/h, reduction in the level of YE from 3 to 1 g/L caused a threefold decrease in the steady-state concentration of lactic acid at pH 6. No lactic acid was produced with the same mineral salts medium, with ammonium chloride as the sole source of assimilable nitrogen. With the defined salts medium, the conversion efficiency was 98% of theoretical maximum. When chemostat cultures were used as seed for pH-stat batch fermentations, the amount of lactic acid produced correlated well with the activity of the chemostat culture; however, the mechanism of this prolonged induction     

Lactic acid production from cheese whey by immobilized bacteria

The performance of immobilized Bifidobacterium longum in sodium alginate beads and on a spiral-sheet bioreactor for the production of lactic acid from cheese whey was evaluated. Lactose utilization and lactic acid yield of B. longum were compared with those of Lactobacillus helveticus. B. longum immobilized in sodium alginate beads showed better performance in lactose utilization and lactic acid yield than L. helveticus. In the spiral-sheet bioreactor, a lactose conversion ratio of 79% and lactic acid yield of 0.84 g of lactic acid/g of lactose utilized were obtained during the first run with the immobilized L. helveticus. A lactose conversion ratio of 69% and lactic acid yield of 0.51 g of lactic acid/g of lactose utilized were obtained during the first run with immobilized B. longum in the spiral-sheet bioreactor. In producing lactic acid L. helveticus performed better when using the Spiral Sheet Bioreactor and B. longum showed better performance with gel bead immobilization. Because B. longum is a very promising new bacterium for lactic acid production from cheese whey, its optimum fermentation conditions such as pH and metabolic pathway need to be studied further. The ultrafiltration tests have shown that 94% of the cell and cheese whey proteins were retained by membranes with a mol wt cutoff of 5 and 20 KDa.     

Fermentation metabolism and kinetics in the production of organic acids byPropionibacterium acidipropionici

The genusPropionibacterium acidipropionici was grown under pH-controlled batch fermentation conditions for the production of acetic and propionic acids using 19.1 g/L glucose as a carbon source. The optimum pH range was found to be between 5.5 and 6.5. Bacterial metabolism and fermentation pathways were altered at pH values outside this range. Lactic acid was produced as a key intermediate, with the final acetic and propionic acid production entirely dependent on the cell's ability to metabolize the lactic acid. Most of the glucose in the medium was consumed in less than 20 h of fermentation and converted to lactic acid. Batch fermentation at pH 6 showed that lactic acid was completely utilized to produce 8.5 g/L propionic acid and 5.7 g/L acetic acid. However, the bacteria were unable to metabolize lactic acid at pH 7, resulting in 0.7 g/L propionic acid and 7.0 g/L acetic acid in the fermenter. A kinetic study of batch fermentation at pH 6 showed two distinct growth phases during the fermentation. Most of the cell growth was achieved in the exponential growth stage when glucose was consumed as a main substrate. A nonexponential growth stage was observed when lactic acid was utilized as a carbon source, producing propionic and acetic acids as secondary metabolites.     

Lactic acid fermentation in cell-recycle membrane bioreactor

Traditional lactic acid fermentation suffers from low productivity and low product purity. Cell-recycle fermentation has become one of the methods to obtain high cell density, which results in higher productivity. Lactic acid fermentation was investigated in a cell-recycle membrane bioreactor at higher substrate concentrations of 100 and 120 g/dm³. A maximum cell density of 145 g/dm³ and a maximum productivity of 34 g/(dm³…h) were achieved in cell-recycle fermentation. In spite of complete consumption of substrate, there was a continuous increase in cell density in cell-recycle fermentation. Control of cell density in cell-recycle fermentation was attempted by cell bleeding and reduction in yeast extract concentration.     

Semicontinuous production of lactic acid from cheese whey using integrated membrane reactor

Semicontinuous production of lactic acid from cheese whey using free cells of Bifidobacterium longum with and without nanofiltration was studied. For the semicontinuous fermentation without membrane separation, the lactic acid productivity of the second and third runs is much lower than the first run. The semicontinuous fermentation with nanoseparation was run semicontinuously for 72 h with lactic acid to be harvested every 24 h using a nanofiltration membrane unit. The cells and unutilized lactose were kept in the reactor and mixed with newly added cheese whey in the subsequent runs. Slight increase in the lactic acid productivity was observed in the second and third runs during the semicontinuous fermentation with nanofiltration. It can be concluded that nanoseparation could improve the lactic acid productivity of the semicontinuous fermentation process.     

Production of lactic acid from food wastes

Conversion of food wastes into lactic acid by simultaneous saccharification and fermentation (SSF) was investigated. The process involves saccharification of the starch component in food wastes by a commercial amylolytic enzyme preparation (a mixture of amyloglucosidase, α-amylase, and protease) and fermentation by Lactobacillus delbrueckii. The highest observed overall yield of lactic acid in the SSF was 91% of theoretical. Lactic acid concentration as high as 80 g/L was attainable in 48 h of the SSF. The optimum operating conditions for the maximum productivity were found to be 42°C and pH 6.0. Without supplementation of nitrogen-containing nutrients, the lactic acid yield in the SSF decreased to 60%: 27 g/L of lactic acid from 60 g/L of food waste. The overall performance of the SSF, however, was not significantly affected by the elimination of mineral supplements.     

Lactic Acid Production from a Whole Slurry of Acid-Pretreated Spent Coffee Grounds by Engineered Saccharomyces cerevisiae

Spent coffee grounds (SCG) generated after coffee extraction are the main byproduct of the coffee industry. Valorization of the SCG has been increasingly focused following considerable attention in coffee consumption. Lactic acid bacteria fermentation is the primary source of generation of lactic acid, a monomer of polylactic acid that has various industrial applications; however, because of the low tolerance of lactic acid bacteria to toxic compounds, it is necessary to apply Saccharomyces cerevisiae to produce lactic acid whose tolerance to toxic compounds is higher. In this study, we evaluated the feasibility of using SCG as substrate for the production of lactic acid by S. cerevisiae strain expressing heterologous lactate dehydrogenase. The fermentation profiles of the engineered yeast showed that lactic acid production was promoted by xylose addition. From simultaneous saccharification and fermentation (SSF) using a whole slurry of acid-pretreated SCG, containing high amounts of hemicellulose fractions, lactic acid (0.11 g) and ethanol (0.10 g) per g SCG were obtained after 24 h of SSF, of which yields were 413% and 221% higher, respectively, than those of washed pretreated SCG. Thus, fermentation of whole slurry SCG by engineered S. cerevisiae is a suitable way of lactic acid production, selectively.

     

Lactic acid production from cellulosic material by synergetic hydrolysis and fermentation

The hydrolysis process on corncob residue was catalyzed synergetically by the cellulase from Trichoderma reesei and the immobilized cellobiase. The feedback inhibition to cellulase reaction caused by the accumulation of cellobiose was eliminated efficiently. The hydrolysis yield of corncob residue was 82.5%, and the percentage of glucose in the reducing sugar reached 88.2%. The glucose in the cellulosic hydrolysate could be converted into lactic acid effectively by the immobilized cells of Lactobacillus delbrueckii. When the enzymatic hydrolysis of cellulose and the fermentation of lactic acid were coupled together, no glucose was accumulated in the reaction system, and the feedback inhibition caused by glucose was also eliminated. Under the batch process of synergetic hydrolysis and lactic acid fermentation with 100 g/L of cellulosic substrate, the conversion efficiency of lactic acid from cellulose and the productivity of lactic acid reached 92.4% and 0.938 g/(L·h), respectively. By using a fed-batch technique, the total concentration of cellulosic substrate and lactic acid in the synergetic process increased to 200 and 107.5 g/L, respectively, whereas the dosage of cellulase reduced from 20 to 15 IU/g of substrate in the batch process. The results of the bioconversion of renewable cellulosic resources were significant.     

Separate and Concentrate Lactic Acid Using Combination of Nanofiltration and Reverse Osmosis Membranes

The processes of lactic acid production include two key stages, which are (a) fermentation and (b) product recovery. In this study, free cell of Bifidobacterium longum was used to produce lactic acid from cheese whey. The produced lactic acid was then separated and purified from the fermentation broth using combination of nanofiltration and reverse osmosis membranes. Nanofiltration membrane with a molecular weight cutoff of 100–400 Da was used to separate lactic acid from lactose and cells in the cheese whey fermentation broth in the first step. The obtained permeate from the above nanofiltration is mainly composed of lactic acid and water, which was then concentrated with a reverse osmosis membrane in the second step. Among the tested nanofiltration membranes, HL membrane from GE Osmonics has the highest lactose retention (97 ± 1%). In the reverse osmosis process, the ADF membrane could retain 100% of lactic acid to obtain permeate with water only. The effect of membrane and pressure on permeate flux and retention of lactose/lactic acid was also reported in this paper.     

Metabolism of cheese whey lactose by kluyveromyces fragilis for energy and growth under batch condition

The fermentation of lactose byKluyveromyces fragilis is an exothermic reaction in which heat is released, resulting in a rise in reactor temperature. A heat balance was performed on a 5-L batch reactor used for single cell protein (SCP) production to determine the portions of cheese whey lactose used for energy and growth. On the average, about 88% of lactose was used for growth, and 12% was used for energy. The lactose consumed during the lag and stationary phases was used mostly for cell endogenous growth and respiration, whereas that consumed during the exponential growth phase was used for cell multiplication and energy. The heat released varied from 6.5 to 8.9 kJ/g cell. Because of the proper design of the fermenter, the temperature of the medium did not rise above 33°C; thus, no cooling system was needed.     

Immobilization ofLactobacillus bulgaricus in a hollowfiber bioreactor for production of lactic acid from acid whey permeate

Lactobacillus bulgaricus was immobilized in the shell side of an industrial hollow-fiber ultrafiltration module. Acid whey permeate, containing 46 g/L lactose supplemented with 10 g/L yeast extract, was pumped through the tube side at dilution rates of 0.2–2.5/h. At a cell concentration of 100 g/L, productivity was 1.5–5 g lactic acid/L/h.     

Lactic acid recovery from cheese whey fermentation broth using combined ultrafiltration and nanofiltration membranes

The separation of lactic acid from lactose in the ultrafiltration permeate of cheese whey broth was studied using a cross-flow nanofiltration membrane unit. Experiments to test lactic acid recovery were conducted at three levels of pressure (1.4, 2.1, and 2.8 MPa), two levels of initial lactic acid concentration (18.6 and 27 g/L), and two types of nanofiltration membranes (DS-5DK and DS-5HL). Higher pressure caused significantly higher permeate flux and higher lactose and lactic acid retention (p<0.0001). Higher initial lactic acid concentrations also caused significantly higher permeate flux, but significantly lower lactose and lactic acid retention (p<0.0001). The two tested membranes demonstrated significant differences on the permeate flux and lactose and lactic acid retention. Membrane DS-5DK was found to retain 100% of lactose at an initial lactic acid concentration of 18.6 g/L for all the tested pressures, and had a retention level of 99.5% of lactose at initial lactic acid concentration of 27 g/L when the pressure reached 2.8 MPa. For all the test when lactose retention reached 99–100%, as much as 64% of the lactic acid could be recovered in the permeate.     

Fermentation kinetics of ethanol production from glucose and xylose by recombinant Saccharomyces 1400(pLNH33)

Fermentation kinetics of ethanol production from glucose, xylose, and their mixtures using a recombinant Saccharomyces 1400 (pLNH33) are reported. Single-substrate kinetics indicate that the specific growth rate of the yeast and the specific ethanol productivity on glucose as the substrate was greater than on xylose as a substrate. Ethanol yields from glucose and xylose fermentation were typically 95 and 80% of the theoretical yield, respectively. The effect of ethanol inhibition is more pronounced for xylose fermentation than for glucose fermentation. Studies on glucose-xylose mixtures indicate that the recombinant yeast co-ferments glucose and xylose. Fermentation of a 52.8 g/L glucose and 56.3 g/L xylose mixture gave an ethanol concentration of 47.9 g/L after 36 h. Based on a theoretical yield of 0.51 g ethanol/g sugars, the ethanol yield from this experiment (for data up to 24 h) was calculated to be 0.46 g ethanol/g sugar or 90% of the theoretical yield. The specific growth rate of the yeast on glucose-xylose mixtures was found to lie between the specific growth rate on glucose and the specific growth rate on xylose. Kinetic studies were used to develop a fermentation model incorporating the effects of substrate inhibition, product inhibition, and inoculum size. Good agreements were obtained between model predictions and experimental data from batch fermentation of glucose, xylose, and their mixtures.     

Lactic acid production through cell-recycle repeated-batch bioreactor

The effect of various nitrogen sources on cell growth and lactic acid production was investigated. The most effective nitrogen source was yeast extract; more yeast extract gave higher cell growth and lactic acid productivity. Yeast extract dosage and cell growth were proportional up to a yeast extract concentration of 30 g/L, and lactic acid productivity was linearly correlated up to a yeast extract dosage of 25 g/L. However, increasing the yeast extract content raises the total production cost of lactic acid. Therefore, we attempted to find the optimum yeast extract dosage for a repeated-batch operation with cell recycling. The results show that when using Enterococcus faecalis RKY1 only 26% of the yeast extract dosage for a conventional batch fermentation was sufficient to produce the same amount of lactic acid, whereas the lactic acid concentration in the product stream (92–94 g/L) and lactic acid productivity (6.03–6.20 g/[L·h]) were similar to those of a batch operation. Furthermore, long-term stability was established.     

High-productivity continuous biofilm reactor for butanol production

Corn steep liquor (CSL), a byproduct of the corn wet-milling process, was used in an immobilized cell continuous biofilm reactor to replace the expensive P2 medium ingredients. The use of CSL resulted in the production of 6.29 g/L of total acetone-butanol-ethanol (ABE) as compared with 6.86 g/L in a control experiment. These studies were performed at a dilution rate of 0.32 h⁻¹. The productivities in the control and CSL experiment were 2.19 and 2.01 g/(L·h), respectively. Although the use of CSL resulted in a 10% decrease in productivity, it is viewed that its application would be economical compared to P2 medium. Hence, CSL may be used to replace the P2 medium. It was also demonstrated that inclusion of butyrate into the feed was beneficial to the butanol fermentation. A control experiment produced 4.77 g/L of total ABE, and the experiment with supplemented sodium butyrate produced 5.70 g/L of total ABE. The butanol concentration increased from 3.14 to 4.04 g/L. Inclusion of acetate in the feed medium of the immobilized cell biofilm reactor was not found to be beneficial for the ABE fermentation, as reported for the batch ABE fermentation. Names are necessary to report factually on available data. However, the USDA neither guarantees nor warrants the standard of the product, and the use of the names by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

A simultaneous sucrose bioconversion into ethanol and levan byZymomonas mobilis

Two biotechnological systems were developed for sucrose conversion into levan and ethanol withZymomonas mobilis, ensuring a 66.7% transfer of substrate carbon in a batch and 61% carbon transfer in a continuous culture. The effect of glucose, ethanol, and medium pH on sucrose conversion byZ. mobilis was studied. The addition of ethanol to the fermentation medium, in the final conc. of 100 g/L, uncoupled levan synthesis from ethanol fermentation. For a continuous culture, the most efficient conversion of substrate carbon into levan was reached at pH 4.8, giving 64.2 g/L levan, with the levan yield of 0.22 g/g and the productivity of 3.2 g/L/h.     

Continuous production of butanol from starch-based packing peanuts

Acetone, butanol, ethanol (ABE, or solvents) were produced from starch-based packing peanuts in batch and continuous reactors. In a batch reactor, 18.9 g/L of total ABE was produced from 80 g/L packing peanuts in 110 h of fermentation. The initial and final starch concentrations were 69.6 and 11.1 g/L, respectively. In this fermentation, ABE yield and productivity of 0.32 and 0.17 g/(L·h) were obtained, respectively. Compared to the batch fermentation, continuous fermentation of 40 g/L of starch-based packing peanuts in P2 medium resulted in a maximum solvent production of 8.4 g/L at a dilution rate of 0.033 h⁻¹. This resulted in a productivity of 0.27 g/(L·h). However, the reactor was not stable and fermentation deteriorated with time. Continuous fermentation of 35 g/L of starch solution resulted in a similar performance. These studies were performed in a vertical column reactor using Clostridium beijerinckii BA101 and P2 medium. It is anticipated that prolonged exposure of culture to acrylamide, which is formed during boiling/autoclaving of starch, affects the fermentation negatively.     

Bacillus stearothermophilus for thermophilic production of l-lactic acid

A process for the continuous production of high purityL-lactic acid in a membrane bioreactor at 65°C has been developed. Two differentBacillus stearothermophilus strains have been tested in batch experiments. Lactic acid yields are between 60 and more than 95% of theoretical yields. The amounts of ethanol, acetate, and formate formed varied between 0 and 0.4, 0 and 0.1, and 0 and 0.5, respectively (mol/mol glucose). All byproducts are valuable and may be separated easily by rectification of the fermentation broth. Complete cell retention enables high volumetric productivity (5 g/Lh), and a minimum of growth supplements. The high temperature of 65°C allows the autoselective fermentation without problems with contamination.