硫醇-烯/炔点击化学制备有机/无机杂化材料

有机/无机杂化材料因其独特、优异的结构和性能已经成为目前材料领域的研究热点,硫醇-烯/炔点击化学是近年发展起来的一类新型点击化学,以其反应条件温和、速率快、产率高、产物容易分离以及高度选择性等优点受到国内外研究者的广泛关注。本文综述了近年来硫醇-烯/炔点击化学制备有机/无机杂化材料的研究进展,重点介绍了利用硫醇-烯/炔点击化学制备硅类、碳类、金属及金属氧化物类有机/无机杂化材料,并归纳了这些有机/无机杂化材料在生物医用、环境保护、光电材料等方面的应用,最后展望了硫醇-烯/炔点击化学制备有机/无机杂化材料未来的发展方向。     

Fullerene–Ionic‐Liquid Conjugates: A New Class of Hybrid Materials with Unprecedented Properties

A modular approach has been followed for the synthesis of a series of fullerene–ionic‐liquid (IL) hybrids in which the number of IL moieties (two or twelve), anion, and cation have been varied. The combination of C₆₀ and IL give rise to new unique properties in the conjugates such as solubility in water, which was higher than 800 mg mL^?1 in several cases. In addition, one of the C₆₀–IL hybrids has been employed for the immobilization of palladium nanoparticles through ion exchange followed by reduction with sodium borohydride. Surprisingly, during the reduction several carbon nanostructures were formed that comprised nano‐onions and nanocages with few‐layer graphene sidewalls, which have been characterized by means of thermogravimetric analysis (TGA), X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDAX), and high‐resolution transmission electron microscopy (HRTEM). Finally, the material thus obtained was successfully applied as catalyst in Suzuki and Mizoroki–Heck reactions in a concentration of just 0.2 mol %. In the former process it was recyclable for five runs with no loss in activity.     

Chemical Synthesis,Structure Characterization,and Optical Properties of Hollow PbSx–Solid Au Heterodimer Nanostructures

Heterodimer nanostructures have attracted extensive attention, owing to an increasing degree of complexity, functionality, and then importance. So far, all the reported ones are built from solid nanoparticles. Herein, nearly monodisperse heterodimer nanostructures are constructed by hollow PbS_x and solid Au domains simultaneously through a mild reaction between PbS nanocrystals and the gold species in the presence of dodecylamine. Control experiments clearly reveal the underlying formation mechanism of the hollow PbS_x–solid Au heterodimers. The Au^III species in the solution, lead to the etching of PbS nanocrystals and the Au^I species facilitate the control of the number of gold domains per nanoparticle. Dodecylamine molecules not only work as a stabilizer in the reaction, but also act as a reducing agent that could greatly affect the morphology of the product. The optical properties of the heterodimers are investigated based on UV/Vis absorption spectroscopy and Raman spectroscopy. This novel heterodimer nanostructure pushes the development of complex nanocrystal‐based architectures forward, and also provides many opportunities for potential applications.     

Influence of the Matrix in the Optical Response of Organic-Inorganic Hybrid Materials Doped with Europium(III)

Eu³⁺-doped siloxane-oxide hybrid nanocomposites have been prepared by hydrolysis and condensation of diethoxydimethylsilane (DEDMS) and different metallic alkoxides, M(OR) _n with M = Ti, Zr, Al and Ta. The luminescent properties of Eu³⁺ have been used to study the environment of the rare earth ion within the matrices. Emission spectra shows that the surrounding of the Eu³⁺ varies with the matrix composition and depends on the nature of the metal introduced as cross-linking agent. In addition, decay curves have been performed and they show different lifetime values for each system. Among the systems under investigation, the one with tantalum presents the most anisotropic surrounding and the lowest coordination number for the rare earth ion, and the one with aluminium, which shows the most symmetrical surrounding, presents a small lifetime value, probably due to the tendency of Al³⁺cation to attract and retain hydroxyl groups, responsible for luminescence quenching.     

Hybrid Siloxane-Based Nano Building Blocks for Optical Applications: Optimization of the Synthetic Procedures by Spectroscopic Analysis

Diphenylsilanediol (DPDO) reacts with triethoxysilane (TREOS) in anhydrous conditions and in the presence of pyridine, to form complex mixtures of linear and cyclic condensation products which were identified by ²⁹Si NMR and ATR/FTIR spectroscopies. The distribution of products can be varied by modifying the reaction conditions. Spectroscopic analysis allowed to identify the optimal reagents ratio and concentration for the production of hetero-condensation products minimizing the number of residual –OH groups whose presence would affect the performance of optical waveguides based on the synthesised nano building blocks.     

Sol-Gel技术制备二阶有机/无机复合非线性光学材料的研究进展

溶胶－凝胶技术是制备材料的一种新兴低温工艺，它为两种完全不相容的成份—聚合物材料和无机玻璃的大比例混合（或键合）创造了可能，使得制备出的材料兼备两种成份的优点。本文综述了近年来溶胶－凝胶技术在制备有机／无机复合非线性光学材料领域中的应用，并简要分析了当前研究工作所面临的问题。     

Combining Light Harvesting and Electron Transfer in Silica–Titania‐Based Organic–Inorganic Hybrid Materials

A convenient protocol to fabricate an organic–inorganic hybrid system with covalently bound light‐harvesting chromophores (stilbene and terphenylene–divinylene) and an electron acceptor (titanium oxide) is described. Efficient energy‐ and electron‐transfer processes may take place in these systems. Covalent bonding between the acceptor chromophores and the titania/silica matrix would be important for electron transfer, whereas fluorescence resonant energy transfer (FRET) would strongly depend on the ratio of donor to acceptor chromophores. Time‐resolved spectroscopy was employed to elucidate the detailed photophysical processes. The coupling of FRET and electron transfer was shown to work coherently to lead to photocurrent enhancement. The photocurrent responses reached a maximum when the hybrid‐material thin film contained 60 % acceptor and 40 % donor.     

Triazolyl Conjugated (Oligo)Phenothiazines Building Blocks for Hybrid Materials—Synthesis and Electronic Properties

The Cu-catalyzed alkyne-azide 1,3-dipolar cycloaddition variant provides a highly efficient entry to conjugated triazolyl-substituted (oligo)phenothiazine organosilicon derivatives with luminescence and reversible redox characteristics. Furthermore, by in-situ co-condensation synthesis several representative mesoporous MCM-41 type silica hybrid materials with embedded (oligo)phenothiazines are prepared and characterized with respect to their structural and electronic properties. The hybrid materials also can be oxidized to covalently bound embedded radical cations, which are identified by their UV/Vis absorption signature and EPR signals.     

Metal Oxoclusters as Molecular Building Blocks for the Development of Nanostructured Inorganic–Organic Hybrid Thin Films

Summary. Silica-based inorganic–organic hybrid thin films embedding the organically modified oxohafnium clusters (Hf₄O₂(OMc)₁₂, OMc=OC(O)–C(CH₃)=CH₂) were obtained by photo-activated free radical copolymerisation of the methacrylate groups of the cluster with those of the pre-hydrolysed (methacryloxypropyl)trimethoxysilane (MAPTMS, (CH₂=C(CH₃)C(O)O)(CH₂)₃Si(OCH₃)₃). By this route, a covalent anchoring of the cluster to the forming silica network was achieved. Samples characterized by two different Si/Hf compositions (18:1, 5:1) were prepared. The surface and in-depth composition of the thin films were investigated through Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). XPS depth profiles performed on the thin layers evidenced a homogenous in depth distribution of the hafnium guest species within the whole silica films and sharp film-substrate interfaces. Broad band dielectric spectroscopy (BDS) measurements permitted to investigate the electric response of the obtained films in the frequency and temperature range of 40 Hz – 1 MHz and 0–160°C.     

二阶非线性光学活性聚酰亚胺有机-无机杂化材料的合成与表征

通过溶胶-凝胶法制备了含二阶非线性光学发色团分散红19(DR₁₉)的硅氧烷染料与聚酰亚胺有机-无机杂化材料.利用红外光谱、紫外-可见光谱、SEM、DSC和TGA等手段对其进行了表征.杂化极化后的序参数高达0.48,并具有优良的极化取向稳定性,423K下处理300h后,序参数仍能保持初始值的90%.杂化薄膜有较好的表面平整性,其断面呈网络结构.杂化材料的玻璃化转变温度(T_g)为561K,比纯聚酰亚胺的T_g(543K)高18K,表现出优良的高温热稳定性,其5%热失重温度为691K,10%热失重温度为758K.     

溶胶-凝胶法合成杂化材料中的增容剂的应用

讨论了溶胶 -凝胶法合成有机 /无机杂化聚合物材料中的增容剂的应用 ,并详细介绍了三类增容剂的结构、增容机理和性能。     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

Hybrid Conjugated Organic Oligomers Consisting of Oligodiacetylene and Thiophene Units: Synthesis and Optical Properties

Novel and highly soluble hybrid conjugated organic oligomers consisting of oligodiacetylene and thiophene units have been synthesized in high purity through iterative and divergent approaches based on a sequence of Sonogashira reactions. The series of thiophene‐containing oligodiacetylenes (ThODAs) and homocoupled ThODAs (HThODAs) show—both in solution and in the solid state—a strong optical absorption, which is progressively red shifted with increasing chain length. The linear correlation of the absorption maximum (λ^A_max) with the inverse of conjugation length (CL=number of double and triple bonds) shows that the effective conjugation length of this system is extended up to at least CL=20. Furthermore, absorption measurements of dropcast thin films display not only a bathochromic shift of the absorption maxima but also a higher wavelength absorption, which is attributed to increased π–π interactions. The wavelength of the maximum fluorescence emission (λ^E_max) also increases with CL, and emission is maximal for oligomers with CL=7–12 (fluorescence quantum yield Φ_F=～0.2). Both longer and shorter oligomers display marginal emission. The calculated Stokes shifts of these planar materials are relatively large (0.4 eV) for all oligomers, and likely due to excitation to the S₂ state, thus suggesting that the presence of enyne moieties dominates the ordering of the lowest excited states. The fluorescence lifetimes (τ_F) are short (τ_F,_max=?1 ns) and closely follow the tendency obtained for the fluorescence quantum yield. The anisotropy lifetimes show a near‐linear increase with CL, in line with highly rigid oligomers.     

喹哪啶酸合铕/二氧化硅发光材料的溶胶-凝胶法合成与性能

通过红外光谱、紫外可见光谱、荧光光谱和X射线粉末衍射等测试手段,对溶液中合成的喹哪啶酸合铕(Eu-qina)配合物进行了表征,且将溶胶-凝胶法合成出的Eu-qina/SiO2杂化发光材料,与溶液中合成的配合物Eu-qina进行对比.结果表明,配合物Eu-qina中由于喹哪啶酸能有效地将能量传递给Eu3+离子,使Eu3+发出较强的红色特征荧光,而杂化材料Eu-qina/SiO2因SiO2的加入使荧光强度增大.当Eu-qina配合物的掺杂量达到一定值时,Eu-qina/SiO2发较强的红光,并由晶态的Eu-qina转化为非晶态的Eu-qina/SiO2.     

Mechanical and Thermal Properties of Organic/Inorganic Hybrid Coatings

Two types of organic/inorganic hybrid coatings were produced by the sol-gel route from (a) 80% tetra-ethoxy-silane (TEOS) and 20% glycidoxypropyl-trimethoxy-silane (GPTMS) and (b) GPTMS with varying amounts of diethylene-triamine (DETA). Residual stress was measured from substrate curvature and modulus and hardness were studied using nano-indentation.Coatings derived from 80TEOS/20GPTMS are relatively stiff and brittle. Tensile residual stress, elastic modulus and hardness all increase as the curing temperature is increased to 350°C. The organic components are not cross-linked and act as network modifiers.Coatings derived from GPTMS/DETA are less stiff and softer. Increasing the DETA content increases both E and H by increasing the connectivity of the organic network which dominates the mechanical properties. Thermal degradation begins at about 250°C in all cases, but is retarded when the connectivity of the organic network is high.     

Directional Study of the Optical Properties of Tb3+‐ and Eu3+‐Doped Nanoparticles Embedded in Silica Photonic Crystals

The effects of the stop band (SB) in colloidal photonic crystals composed of silica spheres containing Eu³⁺‐ and Tb³⁺‐doped yttria nanoparticles are analysed. Reflection and transmission spectra indicate movement of the stop band, due to the 111 series of planes, towards shorter wavelengths with increasing angle of observation. The profile of the emission spectra is modified by the presence of the SB depending on the angle of measurement. Such a modification is more effective for a narrow emission band and it is thus more evident in the case of Tb³⁺ than Eu³⁺. An angular effect is also observed in the lifetime, which presents two maxima and one minimum. In the case of Tb³⁺ the maxima are at observation angles of 35 and 50°, and the minimum at 45°. We attribute this behaviour to penetration of the excitation beam at 475 nm modulated by the stop band. The ions excited in this way emit from different depths in the crystal, and therefore their lifetime will be affected differently by the same stop band, depending on the thickness of the crystal that must be crossed. Eu³⁺ shows a similar but less pronounced effect for two reasons: first, the main stop band (due to the 111 planes) is not effective at the excitation wavelength of 392 nm; second, the broadness of the Eu³⁺ emission is comparable to the width of the SB, and a decrease in the transition rate at the wavelength of the SB maximum is compensated by an increase at the sides of the SB.