Metabolic characterization of the early stage of hepatic fibrosis in rat using GC‐TOF/MS and multivariate data analyses

The aim of this study was to explore the changes in the urine metabolic spectrum in rats with the early stage of liver fibrosis using gas chromatography–time of flight/mass spectrometry (GC‐TOF/MS), try to search for potential biomarkers and elucidate the probably metabonomic pathogenesis. The early stage of liver fibrosis was established with a single subcutaneous injection of carbon tetrachloride twice each week for 4 weeks continuously. At the end of the experiment, GC‐TOF/MS technology with multivariate statistical approaches such as principal component analysis, partial least squares‐discriminant analysis and orthogonal partial least squares‐discriminant analysis was used to analyze the changes in the metabolic spectrum trajectory and identify potential biomarkers. Twelve potential biomarkers in the model group, such as succinic acid, threonine and lactose, were selected, which indicate that the metabonomic pathogenesis of the early stage of liver fibrosis may be related to disorders of energy metabolism, amino acid metabolism and fatty acid metabolism.     

Development and validation of a gas chromatography/mass spectrometry metabonomic platform for the global profiling of urinary metabolites

This paper presents a simple and reliable gas chromatography/mass spectrometry (GC/MS) method for the metabonomic analysis of human urine samples. The sample preparation involved the depletion of excess urea via treatment with urease and subsequent protein precipitation using ice-cold ethanol. An aliquot of the mixture was separated, dried, trimethylsilyl (TMS)-derivatized and 1.0 microL of the derivatized extract was injected into the GC/MS system via split injection (1:10). Approximately 150 putative metabolites belonging to different chemical classes were identified from the pooled human urine samples. All the identified metabolites were selected to evaluate precision and stability of the GC/MS assay. More than 95% of the metabolites demonstrated good reproducibility, with intra-day and inter-day precision values below 15%. Metabolic profiling of 53 healthy male and female urine samples in combination with pattern recognition techniques was performed to further validate the GC/MS metabolite profiling assay. Principal component analysis (PCA) followed by orthogonal partial least squares analysis (OPLS) revealed differences between urinary metabolite profiles of healthy male and female subjects. This validated GC/MS metabolic profiling method may be further applied to the metabonomic screening of urinary biomarkers in clinical studies. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Metabolomics analysis reveals variation in Schisandra chinensis metabolites from different origins

Wu Wei Zi (Schisandra chinensis), an important herbal medicine, is mainly distributed in the northeast of China. Its phytochemical compositions, which depend on geographical origin, climatic conditions and cultural practices, may vary largely among Wu Wei Zi from different areas. In this study, we applied a comprehensive metabolite profiling approach using GC–TOF‐MS, ultra‐performance LC (UPLC) quadrupole TOF (QTOF) MS and inductively coupled plasma MS to systematically investigate the metabolite variations of S. chinensis from four different areas including Heilongjiang, Liaoning, Jilin, and Shanxi of China. A total of 65 primary metabolites, 35 secondary metabolites and 64 inorganic elements were identified. Several primary metabolites, including shikimic acid and tricarboxylic acid cycle intermediates, were abundant in those located in Heilongjiang, Jilin, and Liaoning. Besides, bioactive lignans are also highly abundant in those from northeastern China than those from northwestern China. Inorganic elements varied significantly among the different locations. Our results suggested that the metabolite profiling approach using GC–TOF‐MS, ultra‐performance LC quadrupole TOF MS, and inductively coupled plasma MS is a robust and reliable method that can be effectively used to explore subtle variations among plants from different geographical locations.     

Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.     

Advances in the gas chromatographic determination of persistent organic pollutants in the aquatic environment

Environmental chemists have been challenged for over 30 years to analyse complex mixtures of halogenated organic pollutants like polychlorinated biphenyls (PCBs), polychlorinated alkanes (PCAs), polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and polychlorinated furans (PCDD/Fs). Gas chromatography (GC) often proved to be the method of choice because of its high resolution. The recent developments in the field of comprehensive two-dimensional GC (GCxGC) show that this technique can provide much more information than conventional (single-column) GC. Large volume injection (e.g. by programmed temperature vaporiser, or on-column injection) can be employed for the injection of tens of microliters of sample extract, in that way substantially improving the detection limits. Electron-capture detection (ECD) is a sensitive detection method but unambiguous identification is not possible and misidentification easily occurs. Mass spectrometric (MS) detection substantially improves the identification and the better the resolution (as with MS/MS, time-of-flight (TOF) MS and high-resolution (HR)MS), the lower the chances of misidentification are. Unfortunately, this comes only with substantially higher investments and maintenance costs. Co-extracted lipids, sulphur and other interferences can disturb the GC separation and detection leading to unreliable results. Extraction, and more so, sample clean-up and fractionation, are crucial steps prior to the GC analysis of these pollutants. Recent developments in sample extraction and clean-up show that selective pressurised liquid extraction (PLE) is an effective and efficient extraction and clean-up technique that enables processing of multiple samples in less than 1h. Quality assurance tools such as interlaboratory studies and reference materials are very well established for PCDD/Fs and PCBs but the improvement of that infrastructure is needed for brominated flame retardants, PCAs and toxaphene.     

Comprehensive chemical profiling of Guizhi Fuling capsule by the combined use of gas chromatography-mass spectrometry with a deconvolution software and rapid-resolution liquid chromatography quadrupole time-of-flight tandem mass spectrometry

Herbal formulations are complex natural mixtures. Researchers usually tend to focus more on analysis of nonvolatile components but pay less attention to volatile compounds. In this study, an analytical strategy combining two approaches was established for comprehensive analysis of herbal formulations. Guizhi Fuling capsule (GFC), a drug approved by the FDA to enter phase II clinical trial for treatment of primary dysmenorrhea, was taken as a case for analysis. Gas chromatography–mass spectrometry (GC‐MS) with automated mass spectral deconvolution and identification system (AMDIS) led to rapid identification of 48 volatile components including four acetophenones, three fatty acid esters, 13 phenylpropanoids and 19 sesquiterpenes. Most of them were found from Guizhi. The volatile oils of Guizhi have been proved to exhibit many pharmacological activities. This is helpful in understanding the pharmacological mechanism of GFC. Furthermore, AMDIS turned out to be efficient and reliable for analysis of complex herbal formulations. Rapid‐resolution liquid chromatography (RRLC) coupled with electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (ESI‐Q‐TOF MS/MS) allowed the identification of 70 nonvolatile components including six acetophenones, 12 galloyl glucoses, 31 monoterpene glycosides, three phenols and 12 triterpene acids. Fragmentation behaviors of assigned components, especially triterpene acids, which are hard to identify by low‐resolution MS, were first investigated by TOF MS/MS. Characteristic ions and typical loss of assigned triterpene acids were summarized. Combinatorial use of GC‐MS‐AMDIS and RRLC‐ESI‐Q‐TOF MS/MS could be of great help in global qualitative analysis of GFC, as well as other herbal products. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of cholesterol oxidation products by Fast gas chromatography/mass spectrometry

The aim of the present study was to set‐up a Fast gas chromatography/mass spectrometry method for the analysis of cholesterol oxidation products (COPs). A silylated mixture of seven oxysterol standards was injected into a Fast GC/MS system. A capillary GC column (10 m×0.1 mm internal diameter×0.1 μm film thickness) coated with 95% dimethyl‐ and 5% diphenyl‐polysiloxane, was used. The method gave a fast (total analysis time=3.5 min) and satisfactory resolution (R>1.2) of the COPs standards, with a good repeatability and sensitivity, similar to those of conventional GC/MS; recoveries were tested on mice liver. Fast GC/MS method suitability for COPs analysis in food was also tested on an oxidized sardine fillet, which had been previously saponified and purified by NH₂ solid‐phase extraction (SPE); a good repeatability and sensitivity was also obtained. The analytical performance of the Fast GC/MS method for the determination of COPs, together with the consequent significant reduction of the analysis time and consumables, demonstrates that Fast GC/MS represents a valid alternative to conventional GC/MS and evinces the great potential of such an analytical technique, which could be applied for both food and biological samples.     

Evaluation of multiple alternative instrument platforms for targeted and non‐targeted dioxin and furan analysis

The use of gas chromatography coupled to high‐resolution magnetic sector mass spectrometers (GC‐HRMS) is well established for dioxin and furan analysis. However, the use of gas chromatography coupled to triple quadrupole (MS/MS) and time of flight (TOF) mass spectrometers with atmospheric pressure ionization (API) and traditional electron ionization (EI) for dioxin and furan analysis is emerging as a viable alternative to GC‐HRMS screening. These instruments offer greater versatility in the lab for a wider range of compound identification and quantification as well as improved ease of operation. The instruments utilized in this study included 2 API‐MS/MS, 1 traditional EI‐MS/MS, an API‐quadrupole time of flight mass spectrometer (API‐QTOF), and a EI‐high‐resolution TOF (EI‐HRTOF). This study compared these 5 instruments to a GC‐HRMS using method detection limit (MDLs) samples for dioxin and furan analysis. Each instrument demonstrated acceptable MDL values for the 17 chlorinated dioxin and furans studied. The API‐MS/MS instruments provide the greatest overall improvement in MDL value over the GC‐HRMS with a 1.5 to 2‐fold improvement. The API‐QTOF and EI‐TOF demonstrate slight increases in MDL value as compared with the GC‐HRMS with a 1.5‐fold increase. The 5 instruments studied all demonstrate acceptable MDL values with no MDL for a single congener greater than 5 times that for the GC‐HRMS. All 5 instruments offer a viable alternative to GC‐HRMS for the analysis of dioxins and furans and should be considered when developing new validated methodologies.     

Joint MS‐based platforms for comprehensive comparison of rat plasma and serum metabolic profiling

Metabolomics is a rapidly growing field in the comprehensive understanding of cellular and organism‐specific responses associated with perturbations induced by medicines, chemicals and environment. Blood matrices are frequently used in clinical and biological studies. In this study, we compared metabolic profiling between rat plasma and serum using complementary platforms of gas chromatography–mass spectrometry (GC‐MS) and liquid chromatography–quadruple time‐of‐flight–mass spectrometry (LC‐QTOF‐MS). The sample types that were tested included plasma prepared with K₂EDTA and serum collected using venous blood collection protocols. The results of peak area variation for each detected metabolite/feature in the quality control samples showed a good reproducibility in LC‐QTOF‐MS and better reproducibility in GC‐MS. In GC‐MS analysis: (a) 25.8% of the defined metabolites differed serum from plasma profiling (t‐test, p < 0.05); and (b) serum possessed higher sensitivity than plasma for its generally higher peak intensity in the metabolic profiling. In LC‐QTOF‐MS analysis, 13 (in positive ion mode) and seven (in negative ion mode) important metabolites were identified as mainly contributing to the separation between serum and plasma. Copyright © 2014 John Wiley & Sons, Ltd.     

Extraction,derivatization, and determination of metabolome in human macrophages

A GC/TOF‐MS was applied to the determination of metabolites in human macrophages. The extraction conditions and quenching conditions were investigated and optimized. The results indicated that 0.9% w/v sodium chloride at 4°C was the most favorable condition to quench macrophage, 1 mL 50% ACN for 2 min in ice bath was the optimal condition to extract 5 × 10⁶ cells. Two hundred six peaks could be detectable with peak area over 50 using this method. Among these peaks, 45 peaks with the similarity over 700 were identified using standard compounds for endogenous metabolites. Thirty‐seven out of 45 metabolites could be quantified directly by this method. Twenty metabolites were selected randomly, and 15 amino acids were used for method validation. The correlation coefficients (r) ranging from 0.9902 to 0.9977 were obtained for 15 amino acids in the range of 2.35–150.20 μg/mL. The intraday and interday precisions were lower than 19.90% for the randomly selected 20 endogenous metabolites. Using this development method and multivariate statistical technique, several potential biomarkers were found from human macrophages infected by different Mycobacterium tuberculosis (M. tuberculosis) strains. The results suggest that the method could be applied to the investigation of the pathogenicity of tuberculosis.     

An introduction to hybrid ion trap/time‐of‐flight mass spectrometry coupled with liquid chromatography applied to drug metabolism studies

Metabolism studies play an important role at various stages of drug discovery and development. Liquid chromatography combined with mass spectrometry (LC/MS) has become a most powerful and widely used analytical tool for identifying drug metabolites. The suitability of different types of mass spectrometers for metabolite profiling differs widely, and therefore, the data quality and reliability of the results also depend on which instrumentation is used. As one of the latest LC/MS instrumentation designs, hybrid ion trap/time‐of‐flight MS coupled with LC (LC‐IT‐TOF‐MS) has successfully integrated ease of operation, compatibility with LC flow rates and data‐dependent MSⁿ with high mass accuracy and mass resolving power. The MSⁿ and accurate mass capabilities are routinely utilized to rapidly confirm the identification of expected metabolites or to elucidate the structures of uncommon or unexpected metabolites. These features make the LC‐IT‐TOF‐MS a very powerful analytical tool for metabolite identification. This paper begins with a brief introduction to some basic principles and main properties of a hybrid IT‐TOF instrument. Then, a general workflow for metabolite profiling using LC‐IT‐TOF‐MS, starting from sample collection and preparation to final identification of the metabolite structures, is discussed in detail. The data extraction and mining techniques to find and confirm metabolites are discussed and illustrated with some examples. This paper is directed to readers with no prior experience with LC‐IT‐TOF‐MS and will provide a broad understanding of the development and utility of this instrument for drug metabolism studies. Copyright © 2012 John Wiley & Sons, Ltd.     

The application of gas chromatography/atmospheric pressure chemical ionisation time‐of‐flight mass spectrometry to impurity identification in Pharmaceutical Development

Accurate mass measurement (used to determine elemental formulae) is an essential tool for impurity identification in pharmaceutical development for process understanding. Accurate mass liquid chromatography/mass spectrometry (LC/MS) is used widely for these types of analyses; however, there are still many occasions when gas chromatography (GC)/MS is the appropriate technique. Therefore, the provision of robust technology to provide accurate mass GC/MS (and GC/MS/MS) for this type of activity is essential. In this report we describe the optimisation and application of a newly available atmospheric pressure chemical ionisation (APCI) interface to couple GC to time‐of‐flight (TOF) MS. To fully test the potential of the new interface the APCI source conditions were optimised, using a number of standard compounds, with a variety of structures, as used in synthesis at AstraZeneca. These compounds were subsequently analysed by GC/APCI‐TOF MS. This study was carried out to evaluate the range of compounds that are amenable to analysis using this technique. The range of compounds that can be detected and characterised using the technique was found to be extremely broad and include apolar hydrocarbons such as toluene. Both protonated molecules ([M + H]⁺) and radical cations (M^+.) were observed in the mass spectra produced by APCI, along with additional ion signals such as [M + H + O]⁺. The technique has been successfully applied to the identification of impurities in reaction mixtures from organic synthesis in process development. A typical mass accuracy of 1–2 mm/zunits (m/z 80–500) was achieved allowing the reaction impurities to be identified based on their elemental formulae. These results clearly demonstrate the potential of the technique as a tool for problem solving and process understanding in pharmaceutical development. The reaction mixtures were also analysed by GC/electron ionisation (EI)‐MS and GC/chemical ionisation (CI)‐MS to understand the capability of GC/APCI‐MS relative to these two firmly established techniques. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of gas and liquid chromatography coupled to time‐of‐flight mass spectrometry in pesticides: Multiresidue analysis

Analysis of pesticide residues in water and food matrices is an active research area closely related to food safety and environmental issues. In this aspect mass spectrometry (MS) coupled to gas chromatography (GC) and liquid chromatography (LC) has been increasingly used in the analysis of pesticide residues in water and food. The increasing interest in application of high‐resolution mass spectrometry with time‐of‐flight (TOF) and hybrid triple quadrupole TOF in pesticide analysis is due to its capability of performing both targeted and nontargeted analysis. This article discusses an overview of the application of GC‐TOF‐MS and LC‐TOF‐MS in water and food matrices.     

Comprehensive metabonomic analysis of heart tissue from isoproterenol‐induced myocardial infarction rat based on reversed‐phase and hydrophilic interaction chromatography coupled to mass spectrometry

We aim to describe the metabonomic characteristics of myocardial infarction rats. High‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry was utilized to develop a metabonomic method of the heart homogenates of myocardial infarction rats. Hydrophilic interaction chromatography allows the analysis of high polar metabolites, providing complementary information to reversed‐phase liquid chromatography. We combined reversed phase and hydrophilic interaction chromatographic separations to analyze 18 samples, ten from myocardial infarction rat hearts and eight from normal rat hearts. A total of 16 potential biomarkers in rat heart tissue were screened out, primarily related to oxidative stress, nitric oxide damage, taurine, and hypotaurine metabolism and sphingolipid metabolism. This research showed that a comprehensive metabonomic study is a useful tool to reveal the underlying mechanism of myocardial infarction.     

Elimination of Matrix Interferences in GC‐MS Analysis of Pesticides by Entropy Minimization

Gas chromatography‐mass spectrometry (GC‐MS ) is an important analytical technique for the analysis of organophosphorus pesticides in food products. Because of the complex matrices of food products, multiple preprocessing steps are required prior to performing the GC‐MS analysis. Despite that, it is difficult to totally eliminate the interference of complex matrix background. In this work, we introduce an entropy minimization technique that can eliminate the need for comprehensive preprocessing steps to detect organophosphorus pesticides in a fortified orange juice sample. The pure mass spectra and extracted‐ion chromatograms of the pesticides were extracted and reconstructed. The results achieved higher National Institute of Standard and Technology (NIST ) match scores in comparison to the conventional background subtraction technique. Taken together, the entropy minimization technique is capable of providing rapid qualitative and quantitative analyses of complex GC‐MS data. This technique is expected to have great potential for natural products and food analysis applications.     

Analysis of hydroxylated polybrominated diphenyl ether metabolites by liquid chromatography/atmospheric pressure chemical ionization tandem mass spectrometry

Hydroxylated polybrominated diphenyl ether (OH‐PBDEs) metabolites have the potential to cause endocrine disruption as well as other health effects. Currently, gas chromatography/mass spectrometry (GC/MS) after derivatization is used for the analysis of OH‐PBDEs. However, there is a need for the direct analysis of OH‐PBDEs at relatively low concentrations in environmental and biological samples. Liquid chromatography with atmospheric pressure chemical ionization tandem mass spectrometry (LC/APCI‐MS/MS) was evaluated for the analysis of nine OH‐PBDEs, ranging from tri‐ to hexabrominated. Separation of the nine isomeric metabolites was achieved with reversed‐phase liquid chromatography, followed by detection by APCI‐MS in negative mode. Notably, a significant decrease in ionization was observed in 6‐hydroxyl‐substituted PBDE metabolites in the presence of an ortho‐substituted bromine, relative to the other hydroxylated metabolites. This is probably due to the formation of dioxins in the source as a result of the high‐temperature conditions, which prevented ionization by hydrogen abstraction. The MS/MS experiments also provided evidence of the neutral losses of HBr and Br₂, indicating the possible use of neutral loss scanning and selected reaction monitoring (SRM) for the screening of brominated metabolites in samples. The applicability of LC/APCI‐MS/MS was demonstrated for the analysis of metabolites of BDEs 47 and 99 formed in human liver microsomes. The LC/APCI‐MS/MS method was able to detect metabolites that had previously been identified by GC/MS following derivatization. Copyright © 2010 John Wiley & Sons, Ltd.     

A rapid and simple separation and direct detection of glutathione by gold nanoparticles and graphene‐based MALDI–TOF‐MS

In this study, we present a rapid and simple method for the separation and direct detection of glutathione by combining gold nanoparticles and MALDI–TOF‐MS with graphene as matrix. Gold nanoparticles enable the selective capture of thiol‐containing compounds. Gold nanoparticles bound with analytes can be mixed with graphene matrix for direct analysis by MALDI–TOF‐MS, which can avoid sample loss and contamination during transfer process. Compared with a conventional matrix, α‐cyano‐4‐hydroxycinnamic acid, graphene exhibits an excellent desorption/ionization efficiency, thermal and mechanical properties. The use of graphene as matrix avoids the fragmentation of analytes. Stable analysis was achieved with less background interference even at the concentration of 0.625 ng/μL. To further confirm its efficiency, the optimized approach was applied to the separation and detection of glutathione in mouse liver extraction. This result showed the great potential of detection of biologically important thiols in biochemical and biomedical research.     

Characterization of secondary volatile profiles in Nigella sativa seeds from two different origins using accelerated solvent extraction and gas chromatography-mass spectrometry

The extraction and identification of bioactive compounds from herbs is of great interest. In this study, accelerated solvent extraction (ASE) technique was used to analyze the secondary volatile profiles in Nigella sativa seeds obtained from two different origins, Egypt and Bangladesh. The main extraction parameters, including extraction temperature, pressure and static extraction time, were investigated and optimized. Identification and quantification of the major constituents in nonpolar extracts (hexane) were achieved by means of GC‐FID/GC‐MS analysis with external standards. The two seeds showed a similar variety of chemical composition; however, the secondary volatiles profile of Bangladesh seed was higher than that of the Egyptian seed. A total of 25 compounds were identified from the ASE extract under the following optimum extraction conditions: 100°C, 1500 psi and 5 min, for extraction temperature, pressure and static time, respectively. The proposed technique can be used for the characterization of N. sativa varieties or cultivars. Copyright © 2012 John Wiley & Sons, Ltd.     

Structural elucidation of amino amide‐type local anesthetic drugs and their main metabolites in urine by LC‐MS after derivatization and its application for differentiation between positional isomers of prilocaine

The demand for clinical toxicology analytical methods for identifying drugs of abuse and medicinal drugs is steadily increasing. Structural elucidation of amino amide‐type local anesthetic drugs and their main metabolites by GC‐EI‐MS and LC‐ESI‐MS/MS is of great analytical challenge. These compounds exhibit only/mostly fragments/product ions representing the amine‐containing residue, while the aromatic amide moiety remains unidentified. This task becomes even more complicated when discrimination between positional isomers of such compounds is required. Here, we report the development of a derivatization procedure for the differentiation and structural elucidation of a mixture of local anesthetic drugs and their metabolites that possess tertiary and secondary amines in water and urine. A method based on two sequential “in‐vial” instantaneous derivatization processes at ambient temperature followed by LC‐ESI‐MS/MS analysis was developed. 2,2,2‐Trichloro‐1,1‐dimethylethyl chloroformate (TCDMECF) was utilized to selectively convert the secondary amines into their carbamate derivatives, followed by hydrogen peroxide addition to produce the corresponding tertiary amine oxides. The resulting derivatives exhibited rich fragmentation patterns, enabling improved structural elucidation of the original compounds. The developed method was successfully applied to the differentiation and structural elucidation of prilocaine and its four positional isomers, which all possess similar GC and LC retention times and four of them exhibit almost identical EI‐MS and ESI‐MS/MS spectra, enabling their structural elucidation in a single LC‐ESI‐MS/MS analysis. The developed technique is fast and simple and enables discrimination between isomers based on different diagnostic ions/fragmentation patterns.