N‐Confused Phlorin‐Prodigiosin Chimera: meso‐Aryl Oxidation and π‐Extension Triggered by Peripheral Coordination

An N‐confused phlorin isomer bearing a dipyrrin moiety at the α‐position of the confused pyrrole ring ( 1 ) was synthesized. Pd^II and B^III coordination at the peripheral prodigiosin‐like moiety of 1 afforded the corresponding complexes 2 and 3 . Reflux of 2 in triethylamine (TEA) converted the meso‐phenyl into the Pd^II‐coordinating phenoxy group to afford 4 . Under the same reaction conditions, TEA was linked to the α‐position of the dipyrrin unit in 3 as an N,N‐diethylaminovinyl group to afford 5 . Furthermore, peripheral coordination of B^III in 3 and 5 improved the planarity of the phlorin macrocycle and thus facilitated the coordination of Ag^III at the inner cavity to afford 3‐Ag and 5‐Ag , respectively. These results provide an effective approach for developing unique porphyrinoids through peripheral coordination.     

Palladium Nanoparticles Bonded to Two‐Dimensional Iron Oxide Graphene Nanosheets: A Synergistic and Highly Reusable Catalyst for the Tsuji–Trost Reaction in Water and Air

Low cost, high activity and selectivity, convenient separation, and increased reusability are the main requirements for noble‐metal‐nanocatalyst‐catalyzed reactions. Despite tremendous efforts, developing noble‐metal nanocatalysts to meet the above requirements remains a significant challenge. Here we present a general strategy for the preparation of strongly coupled Fe₃O₄ and palladium nanoparticles (PdNPs) to graphene sheets by employing polyethyleneimine as the coupling linker. Transmission electron microscopic images show that Pd and Fe₃O₄ nanoparticles are highly dispersed on the graphene surface, and the mean particle size of Pd is around 3 nm. This nanocatalyst exhibits synergistic catalysis by Pd nanoparticles supported on reduced graphene oxide (rGO) and a tertiary amine of polyethyleneimine (Pd/Fe₃O₄/PEI/rGO) for the Tsuji–Trost reaction in water and air. For example, the reaction of ethyl acetoacetate with allyl ethyl carbonate afforded the allylated product in more than 99 % isolated yield, and the turnover frequency reached 2200 h^?1. The yield of allylated products was 66 % for Pd/rGO without polyethyleneimine. The catalyst could be readily recycled by a magnet and reused more than 30 times without appreciable loss of activity. In addition, only about 7.5 % of Pd species leached off after 20 cycles, thus rendering this catalyst safer for the environment.     

Site‐Selective Ligand Exchange on a Heteroleptic TiIV Complex Towards Stepwise Multicomponent Self‐Assembly

A series of heteroleptic [Ti 1 ₂X]^? complexes have been selectively constructed from a mixture of Ti^IV ions, a pyridyl catechol ligand (H₂ 1 ; H₂ 1 =4‐(3‐pyridyl)catechol), and various bidentate ligands (HX) in the presence of a weak base, in addition to a previously reported [Ti 1 ₂(acac)]^? (acac=acetylacetonate) complex. Comparative studies of these Ti^IV complexes revealed that [Ti 1 ₂(trop)]^? (trop=tropolonate) is much more stable than the [Ti 1 ₂(acac)]^? complex, which allows the replacement of acac with trop on the [Ti 1 ₂(acac)]^? complex. This Ti^IV‐centered site‐selective ligand exchange reaction also takes place on a heteronuclear Pd^II? Ti^IV ring complex with the preservation of the Pd^II‐centered coordination structures. Intra‐ and intermolecular linking between two Ti^IV centers with a flexible or a rigid bis‐tropolone bridging ligand provided a tetranuclear and an octanuclear Pd^II? Ti^IV complex, respectively. These higher‐order structures could be efficiently constructed only through a stepwise synthetic route.     

Dianions as Formal Oxidants: Synthesis and Characterization of Aromatic Dilithionickeloles from 1,4‐Dilithio‐1,3‐butadienes and [Ni(cod)2]

Organolithium compounds can behave as reductants but never as oxidants in redox reactions. Reported herein is that 1,4‐dilithio‐1,3‐butadienes reacted with [Ni(cod)₂] (cod=1,5‐cyclooctadiene) to deliver dilithionickeloles. Single‐crystal X‐ray structural analysis revealed a coplanar structure of dilithionickeloles with an averaging of bond lengths. XPS data confirmed the oxidation state of Ni in dilithionickeloles was Ni²⁺. ⁷Li NMR spectra of dilithionickeloles and theoretical calculations revealed a considerable aromatic character. In this redox reaction, the dilithio dianionic compounds behaved as formal oxidants, thus oxidizing Ni⁰ into Ni²⁺. These results demonstrated that organolithium compounds with π‐conjugation could be used as oxidants and could continue to accept extra electrons.     

Intermolecular Enantioselective Dearomatization Reaction of β‐Naphthol Using meso‐Aziridine: A Bifunctional In Situ Generated Magnesium Catalyst

A direct, facile, and highly diastereo‐ and enantioselective dearomatization reaction of β‐naphthol derivatives with aziridines has been developed for the first time. A newly designed Box–OH ligand was employed for an in situ generated magnesium catalyst and proved to be efficient. The corresponding dearomatization product was transformed into a polycyclic scaffold and polyhydroxylated compound. ¹H NMR studies revealed the activation mode of the dearomatization process of β‐naphthols, and a clear positive nonlinear effect was observed in the reaction, and provides insight into the coordination environment around the Mg^II center and the possible active species.     

Redox and Anion Exchange Chemistry of a Stibine–Nickel Complex: Writing the L,X, Z Ligand Alphabet with a Single Element

According to the covalent bond classification (CBC) method, two‐electron donors are defined as L‐type ligands, one‐electron donors as X‐type ligands, and two‐electron acceptors as Z‐type ligands. These three ligand functions are usually associated to the nature of the ligating atom, with phosphine, alkyl, and borane groups being prototypical examples of L‐, X‐ and Z‐ligands, respectively. A new SbNi platform is reported in which the ligating Sb atom can assume all three CBC ligand functions. Using both experimental and computational data, it is shown that PhICl₂ oxidation of (o‐(Ph₂P)C₆H₄)₃SbNi(PPh₃) ( 1 ) into [(o‐(Ph₂P)C₆H₄)₃ClSb]NiCl ( 2 ) is accompanied by a conversion of the stibine L‐type ligand of 1 into a stiboranyl X‐type ligand in 2 . Furthermore, the reaction of 2 with the catecholate dianion in the presence of cyclohexyl isocyanide results in the formation of [(o‐(Ph₂P)C₆H₄)₃(o‐O₂C₆H₄Sb)]Ni(CNCy) ( 4 ), a complex featuring a nickel atom coordinated by a Lewis acidic, Z‐type, stiborane ligand.     

Enantioselective Copper‐Catalyzed Decarboxylative Propargylic Alkylation of Propargyl β‐Ketoesters with a Chiral Ketimine P,N,N‐Ligand

The first enantioselective copper‐catalyzed decarboxylative propargylic alkylation has been developed. Treatment of propargyl β‐ketoesters with a catalyst, prepared in situ from [Cu(CH₃CN)₄BF₄] and a newly developed chiral tridentate ketimine P,N,N‐ligand under mild reaction conditions, generates β‐ethynyl ketones in good yields and with high enantioselectivities without requiring the pregeneration of ketone enolates. This new process provides facile access to a range of chiral β‐ethynyl ketones in a highly enantioenriched form.     

Localized Mixed‐Valence and Redox Activity within a Triazole‐Bridged Dinucleating Ligand upon Coordination to Palladium

The new dinucleating redox‐active ligand ( L^H4 ), bearing two redox‐active NNO‐binding pockets linked by a 1,2,3‐triazole unit, is synthetically readily accessible. Coordination to two equivalents of Pd^II resulted in the formation of paramagnetic (S= ) dinuclear Pd complexes with a κ²‐N,N′‐bridging triazole and a single bridging chlorido or azido ligand. A combined spectroscopic, spectroelectrochemical, and computational study confirmed Robin–Day Class II mixed‐valence within the redox‐active ligand, with little influence of the secondary bridging anionic ligand. Intervalence charge transfer was observed between the two ligand binding pockets. Selective one‐electron oxidation allowed for isolation of the corresponding cationic ligand‐based diradical species. SQUID (super‐conducting quantum interference device) measurements of these compounds revealed weak anti‐ferromagnetic spin coupling between the two ligand‐centered radicals and an overall singlet ground state in the solid state, which is supported by DFT calculations. The rigid and conjugated dinucleating redox‐active ligand framework thus allows for efficient electronic communication between the two binding pockets.     

One‐Step Versus Multistep Equilibrium of Carbazole‐Bridged Dinuclear Zinc(II) Complex Formation: Metal‐Assisted π‐Association and ‐Dissociation Processes

This work demonstrates a selection criteria that determines whether molecular assembly occurs through a one‐step or stepwise manner in ligand‐bridged dinuclear zinc(II) (Zn²⁺) complex formation, which is associated with the π stacking of building blocks. The building blocks of carbazole ligands ( L¹ and L⁴ ) that contain two imidazole moieties at the 3,6‐positions form 4:2 complexes (i.e., [ L ]₄?(Zn²⁺)₂) at a molar ratio of 0.50 ([Zn²⁺]/[ L ]₀=0.50), thereby providing π stacking between the carbazole ligands. At the molar ratio of 0.67 ([Zn²⁺]/[ L ]₀=0.67), the 4:2 complexes change to 3:2 complexes (i.e., [ L ]₃?(Zn²⁺)₂) with no π‐stacked carbazole unit. In contrast, when the imidazole groups in L¹ are replaced with benzoimidazole groups ( L³ ), L³ also yields the 4:2 complex [( L³ )₄?(Zn²⁺)₂] at a molar ratio of 0.50. However, there is no structural transition from ( L³ )₄?(Zn²⁺)₂ to other complex species above a molar ratio of 0.50. Similarly, when two imidazole groups are introduced into the carbazole ring at 2,7‐positions ( L⁵ ), L⁵ also gives the 4:2 complex [( L⁵ )₄?(Zn²⁺)₂] that shows no structural transition to other complex species at a higher molar ratio.     

One‐Pot Preparation of Imines from Nitroarenes by a Tandem Process with an Ir–Pd Heterodimetallic Catalyst

A new tandem catalytic process has been studied for a heterodimetallic complex containing both iridium and palladium fragments connected by a 1,2,4‐trimethyltriazolyldiylidene ligand. The process implies the unprecedented preparation of imines from the direct reaction of nitroarenes and primary alcohols. The global process comprises the following steps: 1) reduction of the nitroarene to an amine, 2) oxidation of the alcohol to aldehyde, and 3) condensation of the aldehyde and the amine to form the corresponding imine. The oxidation of the alcohol to aldehyde is promoted by the iridium fragment, while the reduction of the nitro group to amine is facilitated by palladium. A wide set of different catalytic systems has been studied, showing that the Ir/Pd complex 1 is a highly active and stable catalyst in the preparation of imines.     

Reaction Optimization,Scalability, and Mechanistic Insight on the Catalytic Enantioselective Desymmetrization of 1,1‐Diborylalkanes via Suzuki–Miyaura Cross‐Coupling

A method for enantioselective desymmetrization of 1,1‐diborylalkanes through a stereoselective Pd‐catalyzed Suzuki–Miyaura cross‐coupling has been thoroughly optimized. The most effective ligand was found to be a α,α,α,α‐tetra‐aryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐derived phosphoramidite. Results show that in order to achieve high selectivity, a suitable balance between the sterics of the aryl groups and the amino group on the ligand must be achieved. While the base has been known to facilitate transmetallation in cross‐coupling reactions, mechanistic studies on this desymmetrization process reveal that the base, in the presence of KHF₂, likely plays an additional role in the hydrolysis of the pinacol boronates to the corresponding boronic acids. Through an in depth optimization of the chiral ligand and mechanistic studies, it was possible to obtain ee values over 90 % for several aryl bromides and to develop a reliably scalable process (up to one gram of 1,1‐diborylalkane substrate).     

CO2‐promoted Water‐medium Ullmann Reaction over a Pd/Phenyl‐SBA‐15 Mesoporous Catalyst

Water‐medium Ullmann reaction was carried out in CO₂ atmosphere over the mesoporous Pd/Ph‐SBA‐15 catalyst exhibiting high activity and selectivity owing to the uniform dispersion of Pd particles and hydrophobilic mesoporous channels which facilitate the diffusion and adsorption of organic molecules, especially in an aqueous medium. The CO₂ also shows promoting effect on activity and selectivity, which could be understood by considering the role of H⁺ in the mechanism of Ullmann reaction. The optimum Ph‐Ph yield (84.0%) was obtained at p=0.8 MPa and V=6.0 mL and could remain almost unchanged even after the catalyst has been used repetitively for 5 times.     

Solvent‐Free One‐Step Photochemical Hydroxylation of Benzene Derivatives by the Singlet Excited State of 2,3‐Dichloro‐5,6‐dicyano‐p‐benzoquinone Acting as a Super Oxidant

Photoinduced hydroxylation of neat deaerated benzene to phenol occurred under visible‐light irradiation of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ), which acts as a super photooxidant in the presence of water. Photocatalytic solvent‐free hydroxylation of benzene derivatives with electron‐withdrawing substituents such as benzonitrile, nitrobenzene, and trifluoromethylbenzene used as neat solvents has been achieved for the first time by using DDQ as a super photooxidant to yield the corresponding phenol derivatives and 2,3‐dichloro‐5,6‐dicyanohydroquinone (DDQH₂) in the presence of water under deaerated conditions. In the presence of dioxygen and tert‐butyl nitrite, the photocatalytic hydroxylation of neat benzene occurred with DDQ as a photocatalyst to produce phenol. The photocatalytic reactions are initiated by oxidation of benzene derivatives with the singlet and triplet excited states of DDQ to form the corresponding radical cations, which associate with benzene derivatives to produce the dimer radical cations, which were detected by the femto‐ and nanosecond laser flash photolysis measurements to clarify the photocatalytic reaction mechanisms. Radical cations of benzene derivatives react with water to yield the OH‐adduct radicals. On the other hand, DDQ ^{. ?} produced by the photoinduced electron transfer from benzene derivatives reacts with the OH‐adduct radicals to yield the corresponding phenol derivatives and DDQH₂. DDQ is recovered by the reaction of DDQH₂ with tert‐butyl nitrite when DDQ acts as a photocatalyst for the hydroxylation of benzene derivatives by dioxygen.     

A New Modular Phosphite‐Pyridine Ligand Library for Asymmetric Pd‐Catalyzed Allylic Substitution Reactions: A Study of the Key Pd‐π‐Allyl Intermediates

A library of phosphite‐pyridine ligands L1 – L12 a – g has been successfully applied for the first time in the Pd‐catalyzed allylic substitution reactions of several di‐ and trisubstituted substrates by using a wide range of C, N and O nucleophiles, among which are the little studied α‐substituted malonates, β‐diketones, and alkyl alcohols. The highly modular nature of this ligand library enables the substituents/configuration at the ligand backbone, and the substituents/configurations at the biaryl phosphite moiety to be easily and systematically varied. We found that the introduction of an enantiopure biaryl phosphite moiety played an essential role in increasing the versatility of the Pd‐catalytic systems. Enantioselectivities were therefore high for several hindered and unhindered di‐ and trisubstituted substrates by using a wide range of C, N and O nucleophiles. Of particular note were the high enantioselectivities (up to>99 % ee) and high activities obtained for the trisubstituted substrates S6 and S7 , which compare favorably with the best that have been reported in the literature. We have also extended the use of these new catalytic systems in alternative environmentally friendly solvents such as propylene carbonate and ionic liquids. Studies on the Pd‐π‐allyl intermediates provide a deeper understanding of the effect of ligand parameters on the origin of enantioselectivity.     

Ultimately Specific 1,4‐cis Polymerization of 1,3‐Butadiene with a Novel Gadolinium Catalyst

Novel complexes [(C₅Me₅)₂Ln][B(C₆F₅)₄] (Ln = Pr, Nd, or Gd) were prepared, which in combination with ⁱBu₃Al efficiently induce highly 1,4‐cis‐specific polymerization of butadiene. The activity of the Gd complex/ⁱBu₃Al system is high enough to exhibit good catalytic activity even at low temperature. Polymerization at −78 °C gave polybutadiene with nearly perfect 1,4‐cis microstructure (>99.9%) with sharp molecular weight distribution (M _w/M _n = 1.45) and in reasonable yield.

ORTEP drawing of 2b . Selected bond distances (Å): Pr‐F1 = 2.549(2), Pr‐F19 = 2.625(2).     

Tuning the Redox Properties of a Nonheme Iron(III)–Peroxo Complex Binding Redox‐Inactive Zinc Ions by Water Molecules

Redox‐inactive metal ions play important roles in tuning chemical properties of metal–oxygen intermediates. Herein we report the effect of water molecules on the redox properties of a nonheme iron(III)–peroxo complex binding redox‐inactive metal ions. The coordination of two water molecules to a Zn²⁺ ion in (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂ ( 1 ‐Zn²⁺) decreases the Lewis acidity of the Zn²⁺ ion, resulting in the decrease of the one‐electron oxidation and reduction potentials of 1 ‐Zn²⁺. This further changes the reactivities of 1 ‐Zn²⁺ in oxidation and reduction reactions; no reaction occurred upon addition of an oxidant (e.g., cerium(IV) ammonium nitrate (CAN)) to 1 ‐Zn²⁺, whereas 1 ‐Zn²⁺ coordinating two water molecules, (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂‐(OH₂)₂ [ 1 ‐Zn²⁺‐(OH₂)₂], releases the O₂ unit in the oxidation reaction. In the reduction reactions, 1 ‐Zn²⁺ was converted to its corresponding iron(IV)–oxo species upon addition of a reductant (e.g., a ferrocene derivative), whereas such a reaction occurred at a much slower rate in the case of 1 ‐Zn²⁺‐(OH₂)₂. The present results provide the first biomimetic example showing that water molecules at the active sites of metalloenzymes may participate in tuning the redox properties of metal–oxygen intermediates.     

Pyrene‐Based Dyad and Triad Leading to a Reversible Chemical and Redox Optical and Magnetic Switch

Two new pyrene–polychlorotriphenylmethyl (PTM) dyads and triads have been synthesized and characterized by optical, magnetic, and electrochemical methods. The interplay between the different electronic states of the PTM moiety in the dyads and triads and the optical and magnetic properties of the molecules have been studied. The electronic spectra of the radicals 5 ^. and 6 ^. show the intramolecular charge‐transfer transition at around 700 nm due to the acceptor character of the PTM radical. In the diamagnetic protonated derivatives 3 and 4 the fluorescence due to the pyrene is maintained, whereas in the radicals 5 ^. and 6 ^. and the corresponding anions 5 ^? and 6 ^? there is a clear quenching of the fluorescence, which is more efficient in the case of radicals. The redox activity of PTM radicals that are easily reduced to the corresponding carbanion has been exploited to fabricate electrochemical switches with optical and magnetic response.