Directed Self‐Assembly of DNA Tiles into Complex Nanocages

Tile‐based self‐assembly is a powerful method in DNA nanotechnology and has produced a wide range of well‐defined nanostructures. But the resulting structures are relatively simple. Increasing the structural complexity and the scope of the accessible structures is an outstanding challenge in molecular self‐assembly. A strategy to partially address this problem by introducing flexibility into assembling DNA tiles and employing directing agents to control the self‐assembly process is presented. To demonstrate this strategy, a range of DNA nanocages have been rationally designed and constructed. Many of them can not be assembled otherwise. All of the resulting structures have been thoroughly characterized by gel electrophoresis and cryogenic electron microscopy. This strategy greatly expands the scope of accessible DNA nanostructures and would facilitate technological applications such as nanoguest encapsulation, drug delivery, and nanoparticle organization.     

Aqueous Self‐Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles

Self‐assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self‐assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500 nm) and microsized (>5 μm) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics.     

Self‐Assembly of Polyaniline/Au Composites: From Nanotubes to Nanofibers

Summary: Polyaniline (PANI)/Au composite nanotubes and nanofibers are synthesized through a self‐assembly process in the presence of camphorsulfonic acid and hydrochloric acid, as dopants, respectively. The PANI/Au composites are characterized by FT‐IR, UV‐vis, and thermogravimetric analysis to verify the incorporation of the Au nanoparticles and determine the Au content. Structural characterization is performed using SEM, TEM and X‐ray diffraction. The presence of the Au nanoparticles results in an increased conductivity and improved crystallinity of the PANI. The self‐assembly method employed here is a simple and inexpensive route to synthesize multifunctional nanotubes and nanofibers and could be extended to prepare other inorganic nanoparticle/PANI composites.

TEM image of PANI/Au nanotubes.     

Self‐Assembly of π‐Conjugated Gelators into Emissive Chiral Nanotubes: Emission Enhancement and Chiral Detection

A series of new π‐conjugated gelators that contain various aromatic rings (phenyl, naphthyl, 9‐anthryl) and amphiphilic L ‐glutamide was designed, and their gel formation in organic solvents and self‐assembled nanostructures was investigated. The gelators showed good gelation ability in various organic solvents that ranged from polar to nonpolar. Those gelator molecules with small rings such as phenyl and naphthyl self‐assembled into nanotube structures in most organic solvents and showed strong blue emission. However, the 9‐anthryl derivative formed only a nanofiber structure in any organic solvent, probably owing to the larger steric hindrance. All of these gels showed enhanced fluorescence in organogels. Furthermore, during the gel formation, the chirality at the L ‐glutamide moiety was transferred to the nanostructures, thus leading to the formation of chiral nanotubes. One of the nanotubes showed chiral recognition toward the chiral amines.     

Self‐Assembled Vesicles with Functionalized Membranes

Biological membranes play a key role for the function of living organisms. Thus, many artificial systems have been designed to mimic natural cell membranes and their functions. A useful concept for the preparation of functional membranes is the embedding of synthetic amphiphiles into vesicular bilayers. The dynamic nature of such noncovalent assemblies allows the rapid and simple development of bio‐inspired responsive nanomaterials, which find applications in molecular recognition, sensing or catalysis. However, the complexity that can be achieved in artificial functionalized membranes is still rather limited and the control of their dynamic properties and the analysis of membrane structures down to the molecular level remain challenging.     

N,N′‐Methylenediimidazolium Salts: From Self‐Assembly to an Efficient DNAse Protection System

We have developed N,N′‐dialkylmethylenediimidazolium salts ([C_nC_nDIM][X]₂) that self‐organize into multilayered cationic vesicles and can interact with DNA. These preorganized systems form complexes with linear DNA and protect it from DNase I cleavage.     

Oligopeptide‐Assisted Self‐Assembly of Oligothiophenes: Co‐Assembly and Chirality Transfer

The biomolecule‐assisted self‐assembly of semiconductive molecules has been developed recently for the formation of potential bio‐based functional materials. Oligopeptide‐assisted self‐assembly of oligothiophene through weak intermolecular interactions was investigated; specifically the self‐assembly and chirality‐transfer behavior of achiral oligothiophenes in the presence of an oligopeptide with a strong tendency to form β‐sheets. Two kinds of oligothiophenes without (QT) or with (QTDA) carboxylic groups were selected to explore the effect of the end functional group on self‐assembly and chirality transfer. In both cases, organogels were formed. However, the assembly behavior of QT was quite different from that of QTDA. It was found that QT formed an organogel with the oligopeptide and co‐assembled into chiral nanostructures. Conversely, although QTDA also formed a gel with the oligopeptide, it has a strong tendency to self‐assemble independently. However, during the formation of the xerogel, the chirality of the oligopeptide can also be transferred to the QTDA assemblies. Different assembly models were proposed to explain the assembly behavior.     

Aqueous Self‐Assembly of Y‐Shaped Amphiphilic Block Copolymers into Giant Vesicles

The preparation and aqueous self‐assembly of newly Y‐shaped amphiphilic block polyurethane (PUG) copolymers are reported here. These amphiphilic copolymers, designed to have two hydrophilic poly(ethylene oxide) (PEO) tails and one hydrophobic alkyl tail via a two‐step coupling reaction, can self‐assemble into giant unilamellar vesicles (GUVs) (diameter ≥ 1000 nm) with a direct dissolution method in aqueous solution, depending on their Y‐shaped structures and initial concentrations. More interesting, the copolymers can self‐assemble into various distinct nano‐/microstructures, such as spherical micelles, small vesicles, and GUVs, with the increase of their concentrations. The traditional preparation methods of GUVs generally need conventional amphiphilic molecules and additional complicated conditions, such as alternating electrical field, buffer solution, or organic solvent. Therefore, the self‐assembly of Y‐shaped PUGs with a direct dissolution method in aqueous solution demonstrated in this study supplies a new clue to fabricate GUVs based on the geometric design of amphiphilic polymers.

     

From Nongelating to Gelating: Synthesis and Structural Self‐Assembling Property Relationships of a Homologous Series of Oligo(amide–triazole)s

A homologous series of oligo(amide–triazole)s (OAT) [ OAT‐CO₂H‐2 n and OAT‐COPrg‐(2 n +1) ] with an increasing number of primary amide (CONH) and triazole hydrogen‐bonding functionalities was prepared by an iterative synthetic procedure. It was found that their self‐assembly and thermoreversible gelation strength had a strong correlation to the number of hydrogen‐bonding moieties in the oligomers. There also existed a threshold value of the number of CONH units, above which all the oligomers became organogelators. Hence, oligomers with ≤4 CONH units are devoid of intermolecular hydrogen bonding and also non‐organogelating, whereas those that contain >4 CONH units show intermolecular association and organogelating properties. For the organogelators, the T_gel value increases monotonically with increasing number of CONH units. On the basis of FTIR measurements, both the CONH and triazole C? H groups were involved in the hydrogen‐bonding process. A mixed xerogel that consisted of a 1:1 weight ratio of two oligomers of different lengths ( OAT‐CO₂H‐6 and OAT‐CO₂H‐12 ) was found to show microphase segregation according to differential scanning calorimetry, thus indicating that oligomers that bear a different number of hydrogen‐bonding units exhibited self‐sorting to maximize the extent of intermolecular hydrogen bonding in the xerogel state.     

Self‐Assembly of Two‐Component Gels: Stoichiometric Control and Component Selection

Two‐component systems capable of self‐assembling into soft gel‐phase materials are of considerable interest due to their tunability and versatility. This paper investigates two‐component gels based on a combination of a L ‐lysine‐based dendron and a rigid diamine spacer (1,4‐diaminobenzene or 1,4‐diaminocyclohexane). The networked gelator was investigated using thermal measurements, circular dichroism, NMR spectroscopy and small angle neutron scattering (SANS) giving insight into the macroscopic properties, nanostructure and molecular‐scale organisation. Surprisingly, all of these techniques confirmed that irrespective of the molar ratio of the components employed, the “solid‐like” gel network always consisted of a 1:1 mixture of dendron/diamine. Additionally, the gel network was able to tolerate a significant excess of diamine in the “liquid‐like” phase before being disrupted. In the light of this observation, we investigated the ability of the gel network structure to evolve from mixtures of different aromatic diamines present in excess. We found that these two‐component gels assembled in a component‐selective manner, with the dendron preferentially recognising 1,4‐diaminobenzene (>70 %), when similar competitor diamines (1,2‐ and 1,3‐diaminobenzene) are present. Furthermore, NMR relaxation measurements demonstrated that the gel based on 1,4‐diaminobenzene was better able to form a selective ternary complex with pyrene than the gel based on 1,4‐diaminocyclohexane, indicative of controlled and selective π–π interactions within a three‐component assembly. As such, the results in this paper demonstrate how component selection processes in two‐component gel systems can control hierarchical self‐assembly.     

Functionalization of Crosslinked Vesicles by Co‐Self‐Assembly of a Gelable Diblock Copolymer and Mercaptosilane

Herein, a convenient and general method to simultaneously fix and functionalize polymeric vesicles with sulphydryl groups by the co‐self‐assembly of poly(ethylene oxide)‐block‐poly[3‐(triethoxysilyl)propyl methacrylate] (PEO‐b‐PTESPMA) and 3‐mercaptopropyltrialkoxysilane in an aqueous solution is reported. The presence of sulphydryl groups across the vesicle membrane has been confirmed by using an energy‐filtered technique during TEM analysis and by capturing Au nanoparticles.

     

Frame‐Guided Assembly of Vesicles with Programmed Geometry and Dimensions

In molecular self‐assembly molecules form organized structures or patterns. The control of the self‐assembly process is an important and challenging topic. Inspired by the cytoskeletal‐membrane protein lipid bilayer system that determines the shape of eukaryotic cells, we developed a frame‐guided assembly process as a general strategy to prepare heterovesicles with programmed geometry and dimensions. This method offers greater control over self‐assembly which may benefit the understanding of the formation mechanism as well as the functions of the cell membrane.     

Crosslinkable Vesicles Self‐Assembled by Amphiphilic Hyperbranched Polyester

Summary: Amphiphilic hyperbranched polyester (H20‐AM) with methacrylate end groups was synthesized based on hyperbranched aliphatic polyester (Boltorn™ H20). Narrow‐dispersed crosslinkable vesicles were obtained by dissolving H20‐AM in water, and characterized by laser light scattering and TEM. The hollow structural vesicle is composed of around 350 H20‐AM molecules, having a radius of around 40 nm and of 1.9 × 10⁶ g · mL⁻¹. The vesicles were fixed by crosslinking of methacrylate groups to form shape‐persistent structures.

TEM images of the crosslinked vesicles at lower magnification.