A mild and efficient copper-catalyzed N-arylation of unprotected sulfonimidamides using boronic acids

An efficient and low cost copper catalyzed system for N-arylation of sulfonimidamides has been developed. The reaction proceeds at room temperature under base free conditions. Various N-aryl, N-heteroaryl, and N-cyclopropyl sulfonimidamides were obtained in good to excellent yields.     

Cu(OAc)2 promoted Chan–Evans–Lam C–N cross coupling reactions on the N- and N′-nitrogen atoms of sulfonimidamides with aryl boronic acids

We report a highly efficient and mild protocol for Chan–Evans–Lam C–N cross coupling of sulfonimidamides and aryl boronic acids using Cu(OAc)₂ as mediator, triethylamine (TEA) as base and acetonitrile as solvent. The reaction proceeds at room temperature and provides high to excellent yields for a variety of boronic acids, allowing N-arylation of both N-protected (N-amine nitrogen) and N-deprotected (N′-imine nitrogen) sulfonimidamides.     

Synthesis of Highly Enantioenriched Sulfonimidoyl Fluorides and Sulfonimidamides by Stereospecific Sulfur–Fluorine Exchange (SuFEx) Reaction

Sulfonimidamides present exciting opportunities as chiral isosteres of sulfonamides, with potential for additional directional interactions. Here, we present the first modular enantioselective synthesis of sulfonimidamides, including the first stereoselective synthesis of enantioenriched sulfonimidoyl fluorides, and studies on their reactivity. A new route to sulfonimidoyl fluorides is presented from solid bench-stable, N-Boc-sulfinamide (Boc=tert-butyloxycarbonyl) salt building blocks. Enantioenriched arylsulfonimidoyl fluorides are shown to be readily racemised by fluoride ions. Conditions are developed, which trap fluoride and enable the stereospecific reaction of sulfonimidoyl fluorides with primary and secondary amines (100 % es, es=enantiospecificity) generating sulfonimidamides with up to 99 % ee. Aryl and alkyl sulfonimidoyl fluoride reagents are suitable for mild late stage functionalisation reactions, exemplified by coupling with a selection of complex amines in marketed drugs.     

Separation and identification of purine nucleosides in the urine of patients with malignant cancer by reverse phase liquid chromatography/electrospray tandem mass spectrometry

Urinary‐modified nucleosides have a potential role as cancer biomarkers for a number of malignant diseases. High performance liquid chromatography (HPLC) was combined with full‐scan mass spectrometry, MS/MS analysis and accurate mass measurements in order to identify purine nucleosides purified from urine. Potential purine nucleosides were assessed by their evident UV absorbance in the HPLC chromatogram and then further examined by the mass spectrometric techniques. In this manner, numerous modified purine nucleosides were identified in the urine samples from cancer patients including xanthine, adenosine, N1‐methyladenosine, 5′‐deoxy‐5′‐methylthioadenosine, 2‐methyladenosine, N6‐threonylcarbamoyladenosine, inosine, N1‐methylinosine, guanosine, N1‐methylguanosine, N7‐methylguanine, N2‐methylguanosine, N2,N2‐dimethyguanosine, N2,N2,N7‐trimethylguanosine. Furthermore, a number of novel purine nucleosides were tentatively identified via critical interpretation of the combined mass spectrometric data including N3‐methyladenosine, N7‐methyladenine, 5′‐dehydro‐2′‐deoxyinosine, N3‐methylguanine, O6‐methylguanosine, N1,N2,N7‐trimethylguanosine, N1‐methyl‐N2‐ethylguanosine and N7‐methyl‐N1‐ethylguanosine. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of alkylated N‐vinylformamide monomers and their polymers

N‐alkyl‐N‐vinylformamide monomers (alkyl: n‐butyl, hexyl, decyl, and dodecyl) are synthesized in two steps: first, preparation of N‐vinylformamide potassium salt by the reaction of N‐vinylformamide (NVF) with potassium t‐butoxide, then reaction with alkyl bromide. All four monomers are liquid and are characterized by IR, ¹H NMR, ¹³C NMR, and mass spectra. They exist as rotomers in solution and a 2D NOE experiment on the N‐hexyl containing polymer shows the E isomer to be favored. The polymerizability of the four monomers is from good to fair, depending upon the length of alkyl chain on the N‐atom‐‐the longer the chain length, the lower lower the polymerizability of monomer. The hydrolysis of poly(N‐hexyl‐N‐vinylformamide) and poly(N‐dodecyl‐N‐vinylformamide) under acidic and basic conditions was examined. Studies show that hydrolytic cleavage of formyl groups of poly (N‐alkylated‐N‐vinylformamide) depends on the hydrophobicity of the alkyl substituent on the N‐atom under acidic conditions; both polymers were hydrolyzed to only a minor extent under alkaline conditions. The N‐alkylated monomers can copolymerize with NVF and demonstrate amphiphilic properties. The copolymers demonstrate a critical aggregation concentration above which they can solubilize a water insoluble dye; the N‐hexyl containing copolymer stabilizes a castor oil‐in‐water emulsion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4994–5004, 2004     

Synthesis and chiral recognition properties of poly(N‐propargylamide) gels derived from ornithine and lysine

Copolymerization of ornithine‐ and lysine‐derived N‐propargylamides, N‐α‐tert‐butoxycarbonyl‐N‐δ‐fluorenylmethoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 1 ), N‐α‐tert‐butoxycarbonyl‐N‐ε‐fluorenylmethoxycarbonyl‐L ‐lysine N′‐propargylamide ( 2 ), N‐α‐fluorenylmethoxycarbonyl‐N‐δ‐tert‐butoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 3 ), and N‐α‐fluorenylmethoxycarbonyl‐N‐ε‐tert‐butoxycarbonyl‐L ‐lysine N′‐propargylamide (4) with dipropargyl adipate was carried out using (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in THF to obtain polymer gels in 80–93% yields. The gels adsorbed N‐benzyloxycarbonyl L ‐alanine, N‐benzyloxycarbonyl L ‐alanine methyl ester, and (S)‐(+)‐1‐phenyl‐1,2‐ethanediol preferably than the corresponding optical isomers. The order of chiral discrimination was poly( 1 ) > poly( 4 ) > poly( 2 ), poly( 3 ) gels. The fluorenylmethoxycarbonyl groups of the gels could be partly removed by piperidine treatment, leading to increase of adsorptivity but decrease of chiral recognition ability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4175–4182, 2008     

Synthesis and Characterization of Novel Ionic Liquids: N‐Substituted Aziridinium Salts

Ionic liquids based on three‐membered ring aziridinium cations have been synthesized for the first time using a straightforward synthetic route. N‐butyl‐N‐methylaziridinium bis(trifluoromethanesulfonyl)imide, N‐propyl‐N‐ethylaziridinium bis(trifluoromethanesulfonyl)imide, N‐butyl‐N‐[2‐(2‐methoxyethoxy)ethyl]aziridinium bis(trifluoromethanesulfonyl)imide, N‐butyl‐N‐methylaziridinium dicyanamide, and N‐butyl‐N‐ethylaziridinium dicyanamide were thus obtained in good yields and satisfactory purity and fully characterized.     

Synthesis and activity of four (N,N‐dimethylamino)benzamide nonsteroidal anti‐inflammatory drugs based on thiazole and thiazoline

Four compounds derived from 2‐aminothiazole and 2‐amino‐2‐thiazoline were prepared by coupling the respective bases with the acid chlorides of either 3‐ or 4‐(N,N‐dimethylamino)benzoic acid. Products were identified using infrared spectroscopy, ¹H NMR spectroscopy and electrospray mass spectroscopy and in two cases by single‐crystal X‐ray diffraction. Of the four, N‐(thiazol‐2‐yl)‐3‐(N,N‐dimethylamino)‐benzamide (1), N‐(thiazolin‐2‐yl)‐4‐(N,N‐dimethylamino)benzamide (2), N‐(thiazolin‐2‐yl)‐3‐(N,N‐dimethylamino) benzamide (3) and N‐(thiazolin‐2‐yl)‐4‐(N,N‐dimethylamino)benzamide (4), the hydrochloride salts of compounds 3 and 4 showed anti‐inflammatory activity across a concentration range of 10^?2?5 × 10^?4 M while 3 (at a concentration of 10^?5 M) was found to have no adverse effect on myocardial function. The X‐ray crystal structure of 2 and the 1:1 adduct structure of 3 with 3‐(N,N‐dimethylamino)benzoic acid are reported.     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Synthesis and insecticidal evaluation of novel N‐oxalyl derivatives of diacylhydrazines containing methylcarbamate moieties

A series of new N‐oxalyl derivatives of diacylhydrazines containing methylcarbamate moieties were synthesized by the reaction of N‐oxalyl chloride of N‐methylcarbmates with N‐tert‐butyl‐N,N′‐diacylhydrazines in the presence of sodium hydride. The reaction of oxalyl chloride with N‐tert‐butyl‐N, N′‐diacylhydrazines to yield 1,3,4‐oxadiazole and 4‐tert‐butyl‐2‐substituted‐phenyl‐4H‐1,3,4‐oxadiazine‐5,6‐dione was found, and the reaction was studied in some detail. The title compounds were evaluated for molting hormone mimicking activity. The results of bioassay showed that the title compounds exhibit moderate larvicidal activities, and toxicity assays indicated that these compounds can induce a premature, abnormal, and lethal larval molt. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:472–475, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20135     

Substituted Tetraaza‐ and Hexaazahexacenes and their N,N′‐Dihydro Derivatives: Syntheses,Properties, and Structures

The palladium‐catalyzed coupling of a substituted o‐diaminoanthracene and a substituted o‐diaminophenazine to substituted 2,3‐dichloroquinoxalines furnishes 10 differently substituted N,N′‐dihydrotetraaza‐ or ‐hexaazahexacenes with the quinoxaline group of the azaacenes carrying fluorine, chlorine, or nitro groups. The N,N′‐dihydrotetraazahexacenes with hydrogen, chlorine, and fluorine subtituents are oxidized to azaacenes, whereas only the parent N,N′‐dihydrohexaazahexacenes, with hydrogen substituents, are oxidized by MnO₂. The resultant azaacenes are characterized by their optical and spectroscopic data. In addition, single‐crystal X‐ray structures have been obtained for the parent tetraazahexacenes and their difluoro‐substituted derivatives. The di‐ and tetrachloro derivatives of the N,N′‐dihydrohexaazahexacene have also been structurally characterized.     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

Syntheses and structures of four new mixed‐amide phosphoric triamides

Phosphoric triamides have extensive applications in biochemistry and are also used as O‐donor ligands. Four new mixed‐amide phosphoric triamide structures, namely rac‐N‐tert‐butyl‐N′,N′′‐dicyclohexyl‐N′′‐methylphosphoric triamide, C₁₇H₃₆N₃OP, (I), rac‐N,N′‐dicyclohexyl‐N′‐methyl‐N′′‐(p‐tolyl)phosphoric triamide, C₂₀H₃₄N₃OP, (II), N,N′,N′′‐tricyclohexyl‐N′′‐methylphosphoric triamide, C₁₉H₃₈N₃OP, (III), and 2‐[cyclohexyl(methyl)amino]‐5,5‐dimethyl‐1,3,2λ⁵‐diazaphosphinan‐2‐one, C₁₂H₂₆N₃OP, (IV), have been synthesized and studied by X‐ray diffraction and spectroscopic methods. Structures (I) and (II) are the first diffraction studies of acyclic racemic mixed‐amide phosphoric triamides. The P—N bonds resulting from the different substituent –N(CH₃)(C₆H₁₁), (C₆H₁₁)NH–, 4‐CH₃‐C₆H₄NH–, (tert‐C₄H₉)NH– and –NHCH₂C(CH₃)₂CH₂NH– groups are compared, along with the different molecular volumes and electron‐donor strengths. In all four structures, the molecules form extended chains through N—H…O hydrogen bonds.     

Synthesis and Characterization of Novel Quaternary Ammonium RAFT Agents

Synthesis of three new cationic thio compounds suitable to control free‐radical polymerization according to the reversible addition fragmentation chain transfer (RAFT) process (reversible addition fragmentation transfer) is presented. Among them, two bear a quaternary ammonium group in the R group [i.e., N,N‐dimethyl‐N‐(4‐(((phenylcarbonothionyl)thio)methyl)benzyl)ethanammonium bromide and N‐(4‐((((dodecylthio) carbonothioyl)thio)methyl)benzyl)‐N,N‐dimethylethanammonium bromide, a dithioester and a trithiocarbonate, respectively]. The synthesis of a trithiocarbonate bearing an ammonium group in the Z group [i.e., 2‐((11‐((benzylthio)carbonothioyl)thio)undecanoyl)oxy)‐N,N,N‐trimethylammonium iodide] is also presented. Another three thio compounds, namely 1,4‐phenylenebis(methylene)dibenzenecarbodithioate, didodecyl‐1,4‐phenylenebis(methylene)bistrithiocarbonate, and 11‐(((benzylthio)carbonothioyl)thio)undecanoic acid, identified as other potentially interesting mono‐or difunctional RAFT agents, which were obtained as side products or intermediates, were isolated and fully characterized.     

Synthesis and antifolate activity of new pyrrolo[2,3‐d]pyrimidine and thieno[2,3‐d]pyrimidine inhibitors of dihydrofolate reductase

Three previously undescribed dihydrofolate reductase (DHFR) inhibitors, N^α‐[4‐[N‐[(2,4‐diaminopyrrolo[2,3‐d]pyrimidin‐5‐yl)methyl]amino]benzoyl]‐N^δ‐hemiphthaloyl‐L‐ornithine (7) , N^α‐ [4‐ [N‐[(2,4‐diaminothieno[2,3‐d]pyrimidin‐5‐yl)methyl]amino]benzoyl]‐ N^δ‐hemiphthaloyl‐L‐ornithine (8) , and N‐[4‐[N‐[(2,4‐diaminothieno[2,3‐d]pyrimidin‐5‐yl)methyl]amino]benzoyl]‐L‐glutamic acid (12) , were synthesized and their antifolate activity was assessed. The ability of 7 and 8 to bind to DHFR and inhibit the growth of CCRF‐CEM human lymphoblastic leukemia cells in culture were dramatically reduced in comparison with the corresponding pteridine analogue, N^α‐(4‐amino‐4‐deoxypteroyl)‐N^δ‐hemiphmaloyl‐L‐ornithine ( 1 , PT523). In a similar manner, the antifolate activity of 12 was markedly reduced in comparison with that of the corresponding glutamate analogue, aminopterin ( 5 , AMT). In contrast, 7, 8 , and 12 all displayed excellent affinity for the reduced folate carrier (RFC) of CCRF‐CEM cells as measured by a standard competitive influx assay. Lack of a consistent correlation between the results of the growth inhibition assays and those of the DHFR and RFC binding assays results suggest that additional factors also play a role in the antifolate activity of these compounds.     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

The influence of sulfur substituents on the molecular geometry and packing of thio derivatives of N‐methylphenobarbital

The room‐temperature crystal structures of four new thio derivatives of N‐methylphenobarbital [systematic name: 5‐ethyl‐1‐methyl‐5‐phenylpyrimidine‐2,4,6(1H,3H,5H)‐trione], C₁₃H₁₄N₂O₃, are compared with the structure of the parent compound. The sulfur substituents in N‐methyl‐2‐thiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐2‐thioxo‐1,2‐dihydropyrimidine‐4,6(3H,5H)‐dione], C₁₃H₁₄N₂O₂S, N‐methyl‐4‐thiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐4‐thioxo‐3,4‐dihydropyrimidine‐2,6(1H,5H)‐dione], C₁₃H₁₄N₂O₂S, and N‐methyl‐2,4,6‐trithiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenylpyrimidine‐2,4,6(1H,3H,5H)‐trithione], C₁₃H₁₄N₂S₃, preserve the heterocyclic ring puckering observed for N‐methylphenobarbital (a half‐chair conformation), whereas in N‐methyl‐2,4‐dithiophenobarbital [5‐ethyl‐1‐methyl‐5‐phenyl‐2,4‐dithioxo‐1,2,3,4‐tetrahydropyrimidine‐6(5H)‐one], C₁₃H₁₄N₂OS₂, significant flattening of the ring was detected. The number and positions of the sulfur substituents influence the packing and hydrogen‐bonding patterns of the derivatives. In the cases of the 2‐thio, 4‐thio and 2,4,6‐trithio derivatives, there is a preference for the formation of a ring motif of the R₂²(8) type, which is also a characteristic of N‐methylphenobarbital, whereas a C(6) chain forms in the 2,4‐dithio derivative. The preferences for hydrogen‐bond formation, which follow the sequence of acceptor position 4 > 2 > 6, confirm the differences in the nucleophilic properties of the C atoms of the heterocyclic ring and are consistent with the course of N‐methylphenobarbital thionation reactions.     

Sulfur Ylide Promoted Synthesis of N‐Protected Aziridines: A Combined Experimental and Computational Approach

A range of N‐protected aziridines [N‐Tosyl (N‐Ts), N‐2‐trimethylsilylethanesulfonamide (N‐SES), N‐tert‐butoxycarbonylamido (N‐Boc), and N‐o‐nitrobenzenesulfonamide (oNs)] were prepared in moderate to good yield and with high enantiomeric excess of both isomers starting from N‐protected imines, using a sulfonium salt derived from Eliel’s oxathiane. The diastereoselectivities of the reactions are influenced by the imine N‐protecting group, the imine substituent, and the sulfide structure. An unusual cis selectivity was observed in the formation of N‐tosyl‐2‐phenyl‐3‐tert‐butylaziridine and N‐o‐trimethylsilylethanesulfonamide‐2‐phenyl‐3‐tert‐butylaziridine, which was explained by using computational models. The analysis suggests that betaine formation in the case of N‐tosyl‐tert‐butylaldimine aziridination using oxathiane benzyl sulfonium ylide 1 ′ is reversible and that the selectivity is determined at the rotation step, which is unusual for semistabilized ylide aziridination. We have shown herein that the steric bulk of an imine substituent, in combination with a sterically demanding sulfonium ylide, can also affect the reversibility of the reaction. This is the first example of this sort involving aziridinations using semistabilized ylides.     

Preparation and characterization of temperature‐ and pH‐responsive diblock copolymers and their silica‐coated nanoparticles

Multiresponsive amphiphilic poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) (PDMAEMA‐b‐PNIPAM) was successfully synthesized by reversible addition‐fragmentation chain transfer polymerization. Poly(N,N‐dimethylaminoethyl methacrylate)‐b‐poly(N‐isopropylacrylamide) has thermal and pH stimuli responsiveness. Their lower critical solution temperature and hydrodynamic radius can be adjusted by varying the copolymer composition, block length, solution pH, and temperature. In addition, a convenient method has been established to prepare cross‐linked silica‐coated nanoparticles with PDMAEMA‐b‐PNIPAM micelles as a template, resulting in good organic/inorganic hybrid nanoparticles defined as 175 to 220 nm. The structure and morphology were characterized by proton nuclear magnetic resonance (₁HNMR), Fourier‐transform infrared spectroscopy (FT‐IR), transmission electron microscopy (TEM), and transmission electron microscopy‐energy dispersive X‐ray spectroscopy (TEM‐EDS).     

Polymeric adducts of rhodium(II) tetraacetate with aliphatic diamines: natural abundance 13C and 15N CPMAS NMR investigations

Complexation properties of dimeric rhodium(II) tetracarboxylates have been utilised in chemistry, spectroscopy and organic synthesis. Particularly, the combination of these rhodium salts with multifunctional ligands results in the formation of coordination polymers, and these are of interest because of their gas‐occlusion properties. In the present work, the polymeric adducts of rhodium(II) tetraacetate with flexible ligands exhibiting conformational variety, ethane‐1,2‐diamine, propane‐1,3‐diamine and their N,N′‐dimethyl‐ and N,N,N′,N′‐tetramethyl derivatives, have been investigated by means of elemental analysis, ¹³C CPMAS NMR, ¹⁵N CPMAS NMR and density functional theory modelling. Elemental analysis and NMR spectra indicated the axial coordination mode and regular structures of (1 : 1)_n oligomeric chains in the case of adducts of ethane‐1,2‐diamine, N,N′‐dimethylethane‐1,2‐diamine N,N,N′,N′‐tetramethylethane‐1,2‐diamine and N,N,N′,N′‐tetramethylpropane‐1,3‐diamine. Propane‐1,3‐diamine and N,N′‐dimethylpropane‐1,3‐diamine tended to form heterogeneous materials, composed of oligomeric (1 : 1)_n chains and the additive of dirhodium units containing equatorially bonded ligands. Experimental findings have been supported by density functional theory modelling of some hypothetical structures and gauge‐invariant atomic orbital calculations of NMR chemical shifts. Copyright © 2013 John Wiley & Sons, Ltd.