A New Modular Phosphite‐Pyridine Ligand Library for Asymmetric Pd‐Catalyzed Allylic Substitution Reactions: A Study of the Key Pd‐π‐Allyl Intermediates

A library of phosphite‐pyridine ligands L1 – L12 a – g has been successfully applied for the first time in the Pd‐catalyzed allylic substitution reactions of several di‐ and trisubstituted substrates by using a wide range of C, N and O nucleophiles, among which are the little studied α‐substituted malonates, β‐diketones, and alkyl alcohols. The highly modular nature of this ligand library enables the substituents/configuration at the ligand backbone, and the substituents/configurations at the biaryl phosphite moiety to be easily and systematically varied. We found that the introduction of an enantiopure biaryl phosphite moiety played an essential role in increasing the versatility of the Pd‐catalytic systems. Enantioselectivities were therefore high for several hindered and unhindered di‐ and trisubstituted substrates by using a wide range of C, N and O nucleophiles. Of particular note were the high enantioselectivities (up to>99 % ee) and high activities obtained for the trisubstituted substrates S6 and S7 , which compare favorably with the best that have been reported in the literature. We have also extended the use of these new catalytic systems in alternative environmentally friendly solvents such as propylene carbonate and ionic liquids. Studies on the Pd‐π‐allyl intermediates provide a deeper understanding of the effect of ligand parameters on the origin of enantioselectivity.     

Copper‐Complex‐Catalyzed Asymmetric Aerobic Oxidative Cross‐Coupling of 2‐Naphthols: Enantioselective Synthesis of 3,3′‐Substituted C1‐Symmetric BINOLs

A novel chiral 1,5‐N,N‐bidentate ligand based on a spirocyclic pyrrolidine oxazoline backbone was designed and prepared, and it coordinates CuBr in situ to form an unprecedented catalyst that enables efficient oxidative cross‐coupling of 2‐naphthols. Air serves as an external oxidant and generates a series of C₁‐symmetric chiral BINOL derivatives with high enantioselectivity (up to 99 % ee) and good yield (up to 87 %). This approach is tolerant of a broader substrates scope, particularly substrates bearing various 3‐ and 3′‐substituents. A preliminary investigation using one of the obtained C₁‐symmetric BINOL products was used as an organocatalyst, exhibiting better enantioselectivity than the previously reported organocatalyst, for the asymmetric α‐alkylation of amino esters.     

Mechanism of the Pd‐catalyzed Decarboxylative Allylation of α‐Imino Esters: Decarboxylation via Free Carboxylate Ion

The Pd‐catalyzed decarboxylative allylation of α‐(diphenylmethylene)imino esters ( 1 ) or allyl diphenylglycinate imines ( 2 ) is an efficient method to construct new C(sp³)? C(sp³) bonds. The detailed mechanism of this reaction was studied by theoretical calculations [ONIOM(B3LYP/LANL2DZ+p:PM6)] combined with experimental observations. The overall catalytic cycle was found to consist of three steps: oxidative addition, decarboxylation, and reductive allylation. The oxidative addition of 1 to [(dba)Pd(PPh₃)₂] (dba=dibenzylideneacetone) produces an allylpalladium cation and a carboxylate anion with a low activation barrier of +9.1 kcal mol^?1. The following rate‐determining decarboxylation proceeds via a solvent‐exposed α‐imino carboxylate anion rather than an O‐ligated allylpalladium carboxylate with an activation barrier of +22.7 kcal mol^?1. The 2‐azaallyl anion generated by this decarboxylation attacks the face of the allyl ligand opposite to the Pd center in an outer‐sphere process to produce major product 3 , with a lower activation barrier than that of the minor product 4 . A positive linear Hammett correlation [ρ=1.10 for the PPh₃ ligand] with the observed regioselectivity ( 3 versus 4 ) supports an outer‐sphere pathway for the allylation step. When Pd combined with the bis(diphenylphosphino)butane (dppb) ligand is employed as a catalyst, the decarboxylation still proceeds via the free carboxylate anion without direct assistance of the cationic Pd center. Consistent with experimental observations, electron‐withdrawing substituents on 2 were calculated to have lower activation barriers for decarboxylation and, thus, accelerate the overall reaction rates.     

A Theoretically‐Guided Optimization of a New Family of Modular P,S‐Ligands for Iridium‐Catalyzed Hydrogenation of Minimally Functionalized Olefins

A library of modular iridium complexes derived from thioether‐phosphite/phosphinite ligands has been evaluated in the asymmetric iridium‐catalyzed hydrogenation of minimally functionalized olefins. The modular ligand design has been shown to be crucial in finding highly selective catalysts for each substrate. A DFT study of the transition state responsible for the enantiocontrol in the Ir‐catalyzed hydrogenation is also described and used for further optimization of the crucial stereodefining moieties. Excellent enantioselectivities (enantiomeric excess (ee) values up to 99 %) have been obtained for a range of substrates, including E‐ and Z‐trisubstituted and disubstituted olefins, α,β‐unsaturated enones, tri‐ and disubstituted alkenylboronic esters, and olefins with trifluoromethyl substituents.     

Biaryl Phosphite–Oxazoline Ligands from the Chiral Pool: Highly Efficient Modular Ligands for the Asymmetric Pd‐Catalyzed Heck Reaction

A highly modular library of readily available phosphite–oxazoline ligands L1 – L21 a – g was successfully applied in the asymmetric Pd‐catalyzed Heck reactions of several substrates and triflates under thermal and microwave conditions. This ligand library contains three main ligand structures that have been designed by systematic modification of one of the most successful ligand families developed for this process. As well as studying the effect of these three ligand structures on the catalytic performance, we also evaluated the effect of modifying several ligand parameters in these ligand structures. The effectiveness of these ligands at transferring the chiral information into the product can be tuned by correctly choosing the ligand components. Both enantiomers of the Heck coupling products were obtained in excellent activities (conversion: >100 % in 10 min), regioselectivities (>99 %) and enantioselectivities (>99 % ee). Under microwave‐irradiation conditions, the reaction times were considerably shorter (full conversion was achieved in a few minutes) and the regio‐ and enantioselectivities were still excellent.     

(3,8,9,14‐Tetraethyl‐2,4,13,15‐tetramethyltripyrrinato)(trifluoroacetato)­palladium(II)

In the crystal structure, the title compound {systematic name: [2,5‐bis­(4‐ethyl‐3,5‐dimethyl‐2H‐pyrrol‐2‐ylidene­meth­yl)‐1H‐pyrrolato](trifluoroacetato)palladium(II)}, [Pd(C₂F₃O₂)(C₂₇H₃₄N₃)], forms chiral mol­ecules with a helical distortion of the tripyrrinate ligand backbone and an essentially planar PdN₃O core, with Pd—N distances ranging from 1.977 (3) to 2.045 (3) Å and a Pd—O distance of 2.051 (2) Å. This distortion of the organic ligand is considered as the conformational answer to the steric inter­action of the terminal methyl groups of the tripyrrinate ligand with the donor O atom of the trifluoro­acetate group.     

Pd‐Catalyzed Selective Bifunctionalization of 3‐Iodo‐o‐Carborane by Pd Migration

A palladium‐catalyzed highly selective 3,4‐bifunctionalization of 3‐I‐o‐carborane has been developed, leading to the preparation of 3‐alkenyl‐4‐R‐o‐carboranes (R=alkyl, alkynyl, aryl, allyl, CN, and amido) in high to excellent yields. This protocol combines the sequential activation of cage B(3)?I and B(4)?H bonds by Pd migration from exo‐alkenyl sp² C to cage B(4), which is driven by thermodynamic force. This represents a brand‐new strategy for selective bifunctionalization of carboranes with two different substituents.     

Palladium‐Catalyzed Aminocarbonylation of N‐Chloroamines with Boronic Acids

Aryl (pseudo)halide‐based (C?X) carbonylation reactions have been extensively studied during the past few decades. From both academic and synthetic points of view, the carbonylative transformation of N?X bonds represents an interesting and attractive area of investigation. In light of this, the first carbonylative cross‐coupling between N‐chloroamines and organoboronic acids has been developed. This new type of aminocarbonylation proceeds at mild temperatures (45–55 °C) with 2 mol % Pd/C (10 wt %) as the ligand‐free catalyst. Not only arylboronic acids, but also alkenyl‐ and alkylboronic acids can be applied as the substrates and bromide and iodide substituents in the substrates are well tolerated. Initial mechanistic investigations have also been performed.     

Convenient Synthesis of 1H‐Indol‐1‐yl Boronates via Palladium(0)‐Catalyzed Borylation of Bromo‐1H‐indoles with ‘Pinacolborane’

An atom‐economic Pd⁰‐catalyzed synthesis of a series of pinacol‐type indolylboronates 3 from the corresponding bromoindole substrates 2 and pinacolborane (pinBH) as borylating agent was elaborated. The optimal catalyst system consisted of a 1 : 2 mixture of [Pd(OAc)₂] and the ortho‐substituted biphenylphosphine ligand L‐3 (Scheme 4, Table). Our synthetic protocol was applied to the fast, preparative‐scale synthesis of 1‐substituted indolylboronates 3a – h in the presence of different functional groups, and at a catalyst load of only 1 mol‐% of Pd.     

Highly Enantioselective Formation of α‐Allyl‐α‐Arylcyclopentanones via Pd‐Catalysed Decarboxylative Asymmetric Allylic Alkylation

A highly enantioselective Pd‐catalysed decarboxylative asymmetric allylic alkylation of cyclopentanone derived α‐aryl‐β‐keto esters employing the (R,R)‐ANDEN‐phenyl Trost ligand has been developed. The product (S)‐α‐allyl‐α‐arylcyclopentanones were obtained in excellent yields and enantioselectivities (up to >99.9 % ee). This represents one of the most highly enantioselective formations of an all‐carbon quaternary stereogenic center reported to date. This reaction was demonstrated on a 4.0 mmol scale without any deterioration of enantioselectivity and was exploited as the key enantioselective transformation in an asymmetric formal synthesis of the natural product (+)‐tanikolide.     

DFT Study of a 5‐endo‐trig‐Type Cyclization of 3‐Alkenoic Acids by Using Pd–Spiro‐bis(isoxazoline) as Catalyst: Importance of the Rigid Spiro Framework for Both Selectivity and Reactivity

The reaction pathway of an enantioselective 5‐endo‐trig‐type cyclization of 3‐alkenoic acids catalyzed by a chiral palladium–spiro‐bis(isoxazoline) complex, Pd–SPRIX, has been studied by density functional theory calculations. The most plausible pathway involves intramolecular nucleophilic attack of the carboxylate moiety on the C?C double bond activated by Pd–SPRIX and β‐H elimination from the resulting organopalladium intermediate. The enantioselectivity was determined in the cyclization step through the formation of a π‐olefin complex, in which one of the two enantiofaces of the olefin moiety was selected. The β‐H elimination occurs via a seven‐membered cyclic structure in which the acetate ligand plays a key role in lowering the activation barrier of the transition state. In the elimination step, the SPRIX ligand was found to behave as a monodentate ligand due to the hemilability of one of the isoxazoline units thereby facilitating the elimination. Natural population analysis of this pathway showed that the more weakly electron‐donating SPRIX ligand, compared with the bis(oxazoline) ligand, BOX, facilitated the formation of the π‐olefin complex intermediate, leading to a smaller overall activation energy and a higher reactivity of the Pd–SPRIX catalyst.     

Adaptative Biaryl Phosphite–Oxazole and Phosphite–Thiazole Ligands for Asymmetric Ir‐Catalyzed Hydrogenation of Alkenes

A library of readily available phosphite–oxazole/thiazole ligands ( L1 a – g – L7 a – g ) was applied in the Ir‐catalyzed asymmetric hydrogenation of several largely unfunctionalized E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The ability of the catalysts to transfer chiral information to the product could be tuned by choosing suitable ligand components (bridge length, the substituents in the heterocyclic ring and the alkyl backbone chain, the configuration of the ligand backbone, and the substituents/configurations in the biaryl phosphite moiety), so that enantioselectivities could be maximized for each substrate as required. Enantioselectivities were therefore excellent (enantiomeric excess (ee) values up to >99 %) for a wide range of E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The biaryl phosphite moiety was a very advantageous ligand component in terms of substrate versatility.     

Synthesis and characterization of color‐stable electroluminescent polymers: Poly(dinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene)s

Two new stepladder conjugated polymers, that is, poly(7,7,15,15‐tetraoctyldinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene) (PONSI) and poly(7,7,15,15‐tetra(4‐octylphenyl)dinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene) (PANSI) with alkyl and aryl substituents, respectively, have been synthesized and characterized. In comparison with poly(indenofluorene)s, both polymers have extended conjugation at the direction perpendicular to the polymer backbone because of the introduction of naphthalene moieties. The emission color of the polymers in film state is strongly dependent on the substituents. While PONSI emits at a maximum of 463 nm, PANSI with the same backbone but aryl substituents displays dramatically redshifted emission with a maximum at 494 nm. Both polymers show stable photoluminescence spectra while annealing at 200 °C in inert atmosphere. The PONSI‐based devices with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al turn on at 3.7 V, and emit at a maximum of 461 nm with the CIE coordinates of (0.19, 0.26), a maximum luminance efficiency of 1.40 cd/A, and a maximum brightness of 2036 cd/m² at 13 V. Meanwhile, the emission color of the devices is independent of driving voltage and keeps unchanged during the continuous operation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4866–4878, 2008     

Pd‐PEPPSI‐IHeptCl: A General‐Purpose,Highly Reactive Catalyst for the Selective Coupling of Secondary Alkyl Organozincs

Dichloro[1,3‐bis(2,6‐di‐4‐heptylphenyl)imidazol‐2‐ylidene](3‐chloropyridyl)palladium(II) (Pd‐PEPPSI‐IHept^Cl), a new, very bulky yet flexible Pd–N‐heterocyclic carbene (NHC) complex has been evaluated in the cross‐coupling of secondary alkylzinc reactants with a wide variety of oxidative addition partners in high yields and excellent selectivity. The desired, direct reductive elimination branched products were obtained with no sign of migratory insertion across electron‐rich and electron‐poor aromatics and all forms of heteroaromatics (five and six membered). Impressively, there is no impact of substituents at the site of reductive elimination (i.e., ortho or even di‐ortho), which has not yet been demonstrated by another catalyst system to date.     

Synthesis of Terphenyl Derivatives by Pd‐Catalyzed Suzuki‐Miyaura Reaction of Dibromobenzene Using 2N2O‐Salen as a Ligand in Aqueous Solution

A simple and efficient catalytic system for Na₂PdCl₄ catalyzing the Suzuki‐Miyaura reaction of dibromobenzene and arylboronic acid has been developed by using 2N2O‐salen as a ligand in H₂O/EtOH (V:V=4:1) at 100°C. Using this method, the reactions of substrates containing sterically demanding ortho substituents (e.g. dibromobenzene and/or arylboronic acids) proceeded efficiently, with the corresponding terphenyl derivatives being produced in moderate to excellent yields. Furthermore, this method offers interesting features for the multi‐gram scale synthesis of terphenyl compound.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Pd‐Catalyzed Cyclocarbonylation of 2‐(2‐Bromoaryl)indoles with CO as a C1 Source: Selective Access to 6 H‐Isoindolo[2,1‐a]indol‐6‐ones and Indeno[1,2‐b]indol‐10(5 H)‐ones

A highly efficient and regioselective synthetic route to 6 H‐isoindolo[2,1‐a]indol‐6‐ones and indeno[1,2‐b]indol‐10(5 H)‐ones through the Pd‐catalyzed cyclocarbonylation of 2‐(2‐bromoaryl)indoles under atmospheric CO pressure has been achieved. Notably, the regioselectivity of the reaction was exclusively dependent on the structural characteristics of the indole substrates. With N‐unsubstituted indoles as the starting materials, the reaction afforded 6H‐isoindolo[2,1‐a]indol‐6‐ones in good‐to‐excellent yields. On the other hand, with N‐substituted indoles as the substrates, the reaction gave indeno[1,2‐b]indol‐10(5 H)‐ones in a highly regioselective manner.     

Enantioselective Pd‐Catalyzed Allylic Alkylation Reactions of Dihydropyrido[1,2‐a]indolone Substrates: Efficient Syntheses of (−)‐Goniomitine, (+)‐Aspidospermidine,and (−)‐Quebrachamine

The successful application of dihydropyrido[1,2‐a]indolone (DHPI) substrates in Pd‐catalyzed asymmetric allylic alkylation chemistry facilitates rapid access to multiple alkaloid frameworks in an enantioselective fashion. Strategic bromination at the indole C3 position greatly improved the allylic alkylation chemistry and enabled a highly efficient Negishi cross‐coupling downstream. The first catalytic enantioselective total synthesis of (?)‐goniomitine, along with divergent formal syntheses of (+)‐aspidospermidine and (?)‐quebrachamine, are reported herein.     

Direct Catalytic Asymmetric Aldol Reaction of α‐Alkoxyamides to α‐Fluorinated Ketones

α‐Oxygen‐functionalized amides found particular utility as enolate surrogates for direct aldol couplings with α‐fluorinated ketones in a catalytic manner. Because of the likely involvement of open transition states, both syn‐ and anti‐aldol adducts can be accessed with high enantioselectivity by judicious choice of the chiral ligands. A broad variety of alkoxy substituents on the amides and aryl and fluoroalkyl groups on the ketone were tolerated, and the corresponding substrates delivered a range of enantioenriched fluorinated 1,2‐dihydroxycarboxylic acid derivatives with divergent diastereoselectivity depending on the ligand used. The amide moiety of the aldol adduct was transformed into a variety of functional groups without protection of the tertiary alcohol, showcasing the synthetic utility of the present asymmetric aldol process.