利用甲基乙烯基酮与醇类加成以制取β-醚酮

以强碱型阴离子交换树脂为催化剂,可使甲基乙烯基酮与醇类反应而制得β-醚酮。所适应的醇包括脂肪族醇、脂环族醇、芳香族醇以及杂环醇。部分产品可用作维生素A醚类合成中的中间体。     

芳基取代戊二烯酮的合成

我们曾报导过数种芳基取代戊二烯酮的合成,其中有些可用作感光树脂体系的光引发剂和指示染料。本文报导另外三种酮(取代基为p-F,m-Cl和p-Cl)的合成,并对它们的波谱与结构的关系进行了初步的讨论。     

H2BPMPED和Dipy协同萃取Ln(Ⅲ)的研究

4-酰代双吡唑酮是一类以吡唑酮为端基的脂肪族或芳香族非环四齿β-二酮,具有很强的配位能力.近年来,人们相继合成了一些具有明显应用前景的这类螯合剂,并对其在溶剂萃取、荧光分析等方面作了大量工作[1-4].我们合成了双(1＇-苯基-3＇-甲基-5＇-氧代吡唑-4＇-基)乙二酮(H2BPMPED).研究了它和2,2'-联吡啶(Dipy)的氯仿溶液从硝酸介质中对部分镧系离子的协同萃取.用斜率法确定了协萃合物的组成为LnBPMPED@HBPMPED@Dipy,测定了它们的半萃取pH值和热力学函数.     

聚苯基不对称三嗪的热分解

用高分辨裂解气相色谱－质谱（ＨＲＰｙＧＣ－ＭＳ）考察了由对苯二眯腙和四种不同芳香族四酮合成的聚苯基不对称三嗪的热分解行为，鉴定了相应裂解产物的组成、分布及其与高分子结构的关系，并用热重法（ＴＧ）测定了它们的热分解反应动力学参数，提出了其热分解反应机理．     

含4，4＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征

含４，４＇－二羟基二苯酮热致液晶四元共聚酯的合成与表征董德文，韩平，倪玉山，丁孟贤，韩伟（中国科学院长春应用化学研究所长春１３００２２）（吉林化工学院化工系吉林）关键词　热致液晶，共聚酯，向列型，二羟基二苯酮关于热致液晶芳香族聚酯的研究已有大量的报道...     

不饱和聚酯树脂的减收缩研究(Ⅱ)——几种饱和聚酯的减收缩作用

饱和聚酯作为减缩剂的优点是制品表面光洁,所得低收缩UP-树脂透明度较好,往往为半透明,使制品外观与原UP-树脂差不多,从而扩大了制品的用途。我们在酸和醇的种类及比例上进行了探索,合成了7种低分子量饱和聚酯并测试了它们的减收缩效果。发现芳香族聚酯具有更好的减收缩性能,其中具有封端结构的效果更佳。此外,制备了几种无填料浇     

大孔树脂对中分子物质的吸附研究

本文选择芳香族氨基酸模拟中分子物质进行体外吸附实验,从南开大学高分子化学研究所合成的大孔树脂中筛选出具有较好去除中分子物质性能的树脂,对尿毒症患者血浆中分子物质的初步吸附试验结果表明,具有一定的效果。     

噁唑烷酮环氧树脂的研究进展

含噁唑烷酮结构的树脂具有优良的耐热性、电性能及物理机械性能等。将噁唑烷酮环引入环氧树脂,可提高固化物的玻璃化转变温度、粘结性、介电性和阻燃性等。本文综述了噁唑烷酮环氧树脂的一般合成方法,探讨了原料配比、反应温度、催化剂种类及用量对噁唑烷酮环氧树脂合成过程的影响,分析了固化剂与噁唑烷酮环氧树脂固化产物性能之间的联系,对噁唑烷酮环氧树脂在绝缘材料、涂料、粘合剂、印刷电路板以及高性能树脂基体等领域的应用情况进行了详细介绍,并对其发展前景予以展望。     

Cp2TiCl2-LiAlH4体系的研究——芳香族二元醇、二元酮及其它有机官能团的还原

本文报道了Cp₂TjCl₂-LiAlH₄体系对芳香族二元醇、二元酮及其它有机官能团的还原作用,发现对于不同的芳香族二元醇、二元酮等,其还原反应产物的组成不同。     

磺化聚苯乙烯大孔树脂催化醛、酮与乙二醇缩合

合成了交换量不同的磺化聚苯乙烯大孔树脂,并将其运用于催化环已酮与乙二醇、苯甲醛与乙二醇的缩合反应。实验表明,磺化聚苯乙烯大孔树脂对醛、酮与乙二醇的缩合反应的催化效果良好,在0.2mol酮(或醛)中加入0.1g树脂,催化环己酮与乙二醇缩合反应的产率最高可达98.2%,催化苯甲醛与乙二醇缩合反应的产率可达73.3%。同时还发现磺化聚苯乙烯大孔树脂的交换量与催化合成缩酮、缩醛的产率有关,交换量为1.00mmol/g时其产率最高,催化性能较稳定。交换量小和交换量太大的树脂催化产率低。该树脂可以重复使用。催化反应完成后,树脂与反应液的分离十分方便,且催化剂对环境没有污染。     

Thermomechanical behavior of a polyphenylquinoxaline

Crosslinking of linear poly[2,2′-(1,4-phenylene)-6,6′-bis(3-phenylquinoxaline)] (PPQ) by isothermal heat exposure in the temperature range between 425 and 490°C was investigated by means of torsional braid analysis. The change in glass transition temperature due to isothermal exposure was used as a kinetic parameter. In order to determine the effect of molecular weight and type of polymer chain ends, three PPQ samples were prepared that differed only in molecular weight and polymer chain endgroups. The apparent activation energy of isothermal crosslinking was independent of molecular weight and chain endings. Its value of 60 kcal/mole is the same as that for the thermal degradation of PPQ (determined by isothermal weight loss measurements). The rates of change of T_g at a particular temperature, however, are a function of both molecular weight (at least for these polymers that do not have a sufficiently high molecular weight) and the type of polymer chain ends. It was observed that isothermally crosslinked PPQ gave a higher break point in the TGA curve and also an increased char yield at 800°C than the linear precursor.     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001     

聚氯代苯基喹噁啉和苯基喹噁啉共聚物的研究

This paper describes a new series of polyphenylquinozaline (PPQ). The starting material, para-bis(p-chlorophenylg!yoxaloyl)benzene(CPGB) was prepared via Grignard reaction. Chlorinated polyphenylquinoxaline was then obtained through cyclocondensa-tion reaction of 3, 3'-diaminotenzidine(DAB) and 3,3', 4,4'-tetramino-diphenyl ether (TAPE) with CPGB. They have higher T, than that of PPQ itself. Block and random copolymers of PPQ were prepared by the reaction of DAB and TAPE with 1,4-bis(phenylgloxaloyl) benzene (PGB) in m-cresol at room temperature. These poly-mers and copolymers exhibit higher thermoxidative stability, and excellent high-temperature resistance even in the presenceof water.     

聚氯代苯基喹(口恶)啉和苯基喹(口恶)啉共聚物的研究

<正> 聚苯基喹(口恶)啉(PPQ)是一类线型的热塑性耐高温芳杂环高分子化合物,为了提高它们的使用温度,首先要提高T_g,通常分子中引入一个氯原子,每克分子的内能约增加3—4kcal。我们用格氏反应,合成了含氯四羰基单体的中间体1,4-双(对氯苯乙酰基)苯,再经氧化得到含氯四羰基单体1,4-双(对氯苯乙二酮)苯,将它与3,3′-二氨基联苯胺,     

Fluorene-bridged polyphenylquinoxalines with high solubility and good thermal stability: Synthesis and properties

<正>A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.     

Development of an improved synthetic route to an AB phenylquinoxaline monomer

The primary objective of this research was the development of an efficient synthetic route for a previously prepared self‐polymerizable PPQ monomer mixture, 2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline. Thus, the intermediate, 4‐hydroxybenzil, was synthesized in good yield, starting from phenol with phenylacetyl chloride, followed by oxidation. The other intermediate, 4‐fluoro‐1,2‐phenylenediamine, was also less costly synthesized, starting from 2,4‐difluoronitrobenzene with ammonium hydroxide, followed by reduction, giving excellent yield. The overall monomer yield was superior to previous reports. Another research objective involved preparation of various monomer mixtures that could be synthesized even less costly, and attempts on polymerization could generate the same structure of PPQ from an original monomer mixture. Thus, the monomer mixture that had switched functional groups from the original one, 2‐(4‐fluorophenyl)‐3‐phenyl‐6‐hydroxyquinoxaline and 3‐(4‐fluorophenyl)‐2‐phenyl‐6‐hydroxyquinoxaline, was prepared. Various monomers with different functional groups attached on the 6‐position of the quinoxaline ring, such as chloro‐ and nitro‐substituted monomers instead of fluoro‐substituted ones, were also prepared. Several attempts to build up high molecular weights were not successful. In the case of the switched monomer mixture, weaker nucleophility and less activation on the fluorine atom were to be the reason in the switched monomer. In the cases of chloro‐ and nitro‐substituted monomers, poorer leaving power and side reactions were to be the reasons. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 801–814, 2005     

聚苯基单醚喹噁啉薄膜的性能与物理老化

研究了物理老化对聚苯基单醚喹啉薄膜的结构与力学性能的影响 .用差示扫描量热计 (DSC)及正电子湮没寿命谱 (PALS)方法表征了两种不同物理老化条件试样的凝聚结构以及自由体积的差别 .结果表明 ,物理老化使聚苯基单醚喹啉薄膜玻璃化转变温度移向高温 ,在其末端出现热焓吸收峰 ,分子链堆砌紧密使自由体积减小 ,分子可动性降低 .用动态力学分析 (DMTA)以及静态拉伸性能测试等方法研究了两类试样的力学性能 ,结果表明 ,物理老化后 ,试样的动态储能模量稍有增加 ,力学损耗降低 .而静态拉伸实验的断裂应变降低 ,屈服应力增加 ,断裂能降低 ,试样在宏观上由韧性断裂变为明显的脆性断裂 .     

Synthesis and characterization of phenolic hydroxyl terminated phenylquinoxaline oligomers

The synthesis of phenylquinoxaline oligomers of predictable molecular weight and with phenolic hydroxyl functional end groups is reported. The synthetic procedure utilizes 4-hydroxybenzil as a substituted monofunctional monomer in a conventional PPQ synthesis to both control molecular weight and introduce the functional end groups. The molecular weights of the oligomers were determined by derivatization of the hydroxyl end groups with 3-(trimethylsilyl)propionyl chloride, followed by ¹H-NMR analysis. Comparison of the integration of the trimethylsilyl resonance to the aromatic resonances allowed calculation of the number average molecular weight. A plot of log(η) vs. log(M_n) correlated well with that reported for high molecular weight PPQ. The end groups influenced the solubility behavior of the oligomers in chlorinated solvents, possibly due to hydrogen bonding. The oligomers were chain-extendable to high molecular weight, confirming their suitability for utilization in copolymerizations to prepare phenylquinoxaline-based block copolymers.     

含喹噁啉环的化合物改性聚己内酰胺

合成了14种由三种含喹(哑心)啉环的芳香化合物改性的聚己内酰胺(MC尼龙),并对其形态、抗冲击强度、吸水性及熔融行为等进行了表征。聚苯基单醚喹(哑心)啉(PPQ)单模型化合物对MC尼龙结晶部分几乎没有影响。少量(0.005—5.0％)吩嗪的引入使MC尼龙的颜色、形态及性能等发生巨大变化,改性体系被认为是氢键相互作用,PPQ双模型化合物的改性作用介于二者之间。     

含喹噁啉环的化合物改性聚己内酰胺

 合成了14种由三种含喹(哑心)啉环的芳香化合物改性的聚己内酰胺(MC尼龙),并对其形态、抗冲击强度、吸水性及熔融行为等进行了表征。聚苯基单醚喹(哑心)啉(PPQ)单模型化合物对MC尼龙结晶部分几乎没有影响。少量(0.005—5.0％)吩嗪的引入使MC尼龙的颜色、形态及性能等发生巨大变化,改性体系被认为是氢键相互作用,PPQ双模型化合物的改性作用介于二者之间。