Wetting study of imidazolium ionic liquids

In this work, we present a systematic contact angles study of a series of 1-alkyl, 3-methyl-imidazolium ionic liquids (ILs) on well-defined polar and nonpolar monolayer surfaces supported on Si wafers. The advancing and receding contact angles of ILs were used to determine the surface energy of the monolayer surfaces using Neumann's equation-of-state and Zisman's critical surface tension approaches. In parallel, the contact angles of conventional probe fluids (molecular liquids) including water, formamide, methylene iodide, ethylene glycol, and hexadecane were determined on the same surfaces. The results obtained showed a great deal of similarity in wetting behavior of ionic vs molecular probe fluids: the contact angles of both sets of liquids followed the same patterns in accord with the surface tension of the fluid. A good agreement was found between the surface energy determined by different sets of liquids.     

The preparation of novel silica modified polyimide membranes: synthesis,characterization, and gas separation properties

In this study, new monomers having siloxane groups were synthesized as an intermediate for preparation of siloxane modified polyimide polymers. Then with these monomers, the synthesis of uncrosslinked and crosslinked polyimide–siloxane hybrid polymer membranes were achieved. The purposes of the preparation of modified polyimides were to modify the thermal and chemical stability, and mechanical strength of polyimides, and to improve the gas separation properties of polymers. The new diamine monomer having siloxane groups was prepared from 3,5‐diaminobenzoic acid (3,5‐DABA) and 3‐aminopropyltrimethoxysilane (3‐APTMS) in N‐methyl‐2‐pyrollidone (NMP) at 180°C. The modified polyimide membranes having different amount of siloxane groups were synthesized from pyromellitic dianhydride (PMDA), 4,4‐oxydianiline (ODA), and 3,5‐diaminobenzamido‐N‐propyltrimethoxy silane (DABA/PTMS) in NMP using a two‐step thermal imidization process. The synthesis of modified polyimide membranes were characterized by Fourier transform infrared spectroscopy (FTIR). The thermal analysis of the polyimides were carried out by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Water absorption and swelling experiments were also carried out for the investigation of structural properties of polymers. FTIR observations confirmed that the polyimide membranes with new diamine intermediate were successfully obtained. Thermal analysis showed that the uncrosslinked copolyimides exhibited two glass transition temperatures, indicating that they were separated microphases and it was found that all the modified copolyimides had showed higher glass transition temperature (T_g) than unmodified polyimides. The separation properties of the prepared polyimide membranes were also characterized by permeability for O₂ and N₂ gases and ideal selectivity values were calculated. Copyright © 2009 John Wiley & Sons, Ltd.     

Wetting behavior of flax fibers as reinforcement for polypropylene

The wetting behavior of several flax (cellulose as reference) and polypropylene fibers is characterized by measuring the wetting rates (penetration velocities) of a series of liquids using the capillary rise technique. This present paper aims to provide a deeper understanding of the complex nature of natural fibers and their surface properties. The fiber surface tensions are estimated from plots of the normalized wetting rate as a function of the surface tension of the liquids assuming, in analogy to Zisman's method, that the maximum of the normalized wetting rate corresponds to the solid surface tension. The estimated surface tensions of the investigated flax fibers indicate that all the fibers are quite "hydrophobic." The method used to separate the fibers from the rest of the plants has a large influence on the estimated fiber surface tensions. In the case of polypropylene (PP) fibers, the estimated surface tension corresponds well with literature data. Grafting small amounts of maleic acid anhydrite (MAH) onto the PP surfaces will not affect the wetting behavior and, therefore, the surface tension, whereas grafting larger amounts (10 wt%) of MAH causes the polymer surface tension to increase significantly. Additional pH-dependent zeta-potential measurements show that even the "pure" PP-fibers contain acidic surface functions, possibly due to further processing at elevated temperatures (thermal degradation or other aging processes).     

Hydrophobic solvation of Gay-Berne particles in modified water models

The solvation of large hydrophobic solutes, modeled as repulsive and attractive Gay-Berne oblate ellipsoids, is characterized in several modified water liquids using the SPC/E model as the reference water fluid. We find that small amounts of attraction between the Gay-Berne particle and any model fluid result in wetting of the hydrophobic surface. However, significant differences are found among the modified and SPC/E water models and the critical distances in which they dewet the hydrophobic surfaces of pairs of repulsive Gay-Berne particles. We find that the dewetting trends for repulsive Gay-Berne particles in the various model liquids correlate directly with their surface tensions, the widths of the interfaces they form, and the openness of their network structure. The largest critical separations are found in liquids with the smallest surface tensions and the broadest interfaces as measured by the Egelstaff-Widom length.     

γ-Fe2O3磁粉的表面特性

要提高磁带、磁盘等磁记录材料的记录密度,"分散"问题是关键之一,而分散过程中的润湿、磁粉团的解体和粒子的凝聚都直接与磁粉的表面特性有关。本文通过各种极性或非极性液体对密堆积磁粉的渗透速度以及磁粉在这些液体中沉降体积测定,研究了液体对磁粉的润湿特性,估测了它们的接触角;文内还尝试按Fowkes理论假定进行了计算,求得γ-Fe₂O₃磁粉表面张力为:γ_s^d=24dyn/cm,γ_s^p=17dyn/cm,γ_s=γ_s^d+γ_s^p=41dyn/cm。     

Wetting and dewetting behaviour of hygroscopic liquids: Recent advancements

This review covers the most recent researches on wetting and dewetting phenomena related to the application of hygroscopic liquids in industry and technologies. Hygroscopic liquids actively absorb moisture from the surrounding air; therefore, they are used in the processes required for the moisturizing of surfaces or preventing the icing as well as control of evaporation rate and the humidity. The air humidity and wettability of substrates were shown to be crucial parameters affecting the wetting/dewetting kinetics of hygroscopic liquids. It is the adsorption of moisture on the hydrophilic surface that promotes the formation and spread of the precursor layer. The latter, in turn, is the droplet-spreading driver. The absorption of moisture by the liquid itself gives only a slight effect on wetting. The work devoted to the dewetting of hygroscopic liquids during evaporation, and the influence of thermal effects arising from contact with moist air on the wetting kinetics is also considered.     

Wettability conversion from superoleophobic to superhydrophilic on titania/single-walled carbon nanotube composite coatings

Superoleophobic surfaces were demonstrated on perfluorosilane-rendered titania (TiO(2))/single-walled carbon nanotube (SWNT) composite coatings. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations revealed that SWNTs play a key role in the formation of overhanging structures and the nanoscale roughness on the coating surface, which compose the two critical morphologic factors for a superoleophobic surface. The wettability conversion from superoleophobic to superhydrophilic of the composite coatings was realized by the gradual decomposition of 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS) on the coating surface using UV irradiation. Contact angle measurement on both smooth TiO(2) surface and rough composite coating surface under different UV irradiation time revealed that the wetting behavior of the liquids on the composite coating surface passes from the Cassie to the Wenzel and finally to the inversed-Cassie regime. Different liquids show different irradiation time for the wetting state change. By controlling the UV irradiation dose, liquids with surface tension difference smaller than 5 mN/m can exist in completely converse wetting states on the same coating surface, that is, superphobic for one liquid while superphilic for another with lower surface tension. Mixed organic liquids with different surface tension can be completely separated through a coated grid using this wettability tuning technique.     

Comparison of dansylated aminopropyl controlled pore glass solvated by molecular and ionic liquids

We compare how (i) four ionic liquids (ILs) (1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C4mim][Tf2N]), 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpy][Tf2N]), and trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P(C6)3C14][Tf2N])) and (ii) two conventional molecular liquids (methanol and 1-octanol) solvate/wet luminescent organic moieties that are covalently attached to the surface of silica controlled pore glass (CPG). A series of aminopropyl CPG particles that have been covalently tagged with the solvatochromic fluorescent probe group dansyl were used in this study. The results demonstrate that ILs solvate/wet the silica surface differently in comparison to molecular liquids (MLs). Specifically, when comparing ILs and MLs that appear to solvate the free probe, dansylpropylsulfonamide (DPSA), equally in solution, we find that ILs do not solvate/wet the silica surfaces as well as the corresponding MLs. The cation component in these ILs is the significant factor in how the ILs solvate/wet silica surfaces. Solvation/wetting of surface-bound species at a silica surface depends on the cation size. Chlorosilane end-capping of the surface silanol and amine residues attenuates the cation's affects.     

Surface Forces in Wetting Films

Reviewed are theoretical and experimental results of Russian and foreign researchers of the surface forces acting in asymmetric system, wetting films contacting with the condensed phase on the one side and with the gaseous phase or own vapor on the other side. Wetting films play an important role in such phenomena as wetting and spreading, flotation, polymolecular adsorption, evaporation of liquids from porous bodies, and capillary condensation. Disjoining pressure isotherms of wetting films determine the wetting conditions and the values of forming contact angles. The mechanisms of film stability, rupture, and coalescence are discussed based on the theory of surface forces. The properties of the films of nonpolar liquids and liquid mixtures; polymolecular adsorption films of polar liquids; as well as wetting films of aqueous electrolyte solutions, surfactants and polymers are analyzed systematically.     

Tunable wettability of polyimide films based on electrostatic self-assembly of ionic liquids

We have demonstrated that the surface wettability of negatively charged polyimide films could be tuned by electrostatic self-assembly of ionic liquids. The water contact angles of the polyimide films varied in the range 27-80 degrees for 13 different ionic liquids based on imidazolium and ammonium salts. The surface morphology of the resulting surfaces was characterized using atomic force microscopy. The results revealed that the assembly of longer-substituent cations was characterized by the formation of spherical nanoparticles that were formed due to sequent aggregation of cations on those electrostatically assembled ones via hydrophobic interaction. In this case, the counteranions are present in the assembled layers and the wettability is accordingly affected. Whereas for shorter-substituent cations, no aggregates were formed due to the less hydrophobic interaction than the electrostatic repulsive interaction between the cations, and the counteranions were absent from the assembled layers. This method can also be utilized to quantify the hydrophobicity of various ionic liquids.     

Dynamic wetting of a fluoropolymer surface by ionic liquids

The spontaneous spreading of ionic liquids on a fluoropolymer surface (Teflon AF1600) in air is investigated by high-speed video microscopy. Six ionic liquids (EMIM BF(4), BMIM BF(4), OMIM BF(4), EMIM NTf(2), BMIM NTf(2) and HMIM NTf(2)) are used as probe liquids. The dependence of the dynamic contact angle on contact line velocity is interpreted with a hydrodynamic model and a molecular-kinetic model. The usefulness of the hydrodynamic model is rather limited. There is a good correspondence between the molecular dimensions of the liquids and the physical parameters of the molecular-kinetic model. The viscous and molecular-kinetic contributions to energy dissipation are calculated, revealing that energy is dissipated in the bulk as well as at the contact line during dynamic wetting. There are wide ramifications of these results in areas ranging from lubrication and biology to minerals processing and petroleum recovery.     

New Prediction Model of Surface and Interfacial Energies Based on COSMO-UCE**

The nature and strength of intermolecular and surface forces are the key factors that influence the solvation, adhesion and wetting phenomena. The universal cohesive energy prediction equation based on conductor-like screening model (COSMO-UCE) was extended from like molecules (pure liquids) to unlike molecules (dissimilar liquids). A new molecular-thermodynamic model of interfacial tension (IFT) for liquid-liquid and solid-liquid systems was developed in this work, which can predict the surface free energy of solid materials and interfacial energy directly through cohesive energy calculations based on COSMO-UCE. The applications of this model in prediction of IFT for water-organic, solid (n-hexatriacontane, polytetrafluoroethylene (PTFE) and octadecyl-amine monolayer)-liquid systems have been verified extensively with successful results; which indicates that this is a straightforward and reliable model of surface and interfacial energies through predicting intermolecular interactions based on merely molecular structure (profiles of surface segment charge density), the dimensionless wetting coefficient R_A/C can characterize the wetting behavior (poor adhesive (non-wetting), wetting, spreading) of liquids on the surface of solid materials very well.     

Substrate-induced coagulation (SIC) of nano-disperse alumina in non-aqueous media: The dispersibility and stability of alumina in N-methyl-2-pyrrolidinone

This work investigated colloidal properties such as the zeta-potential, the electrophoretic mobilities and the wetting behaviour of alumina dispersed in non-aqueous media. Non-aqueous dispersions of alumina were prepared in the solvent N-methyl-2-pyrrolidinone (NMP). The wetting behaviour of alumina in NMP was characterized by the powder contact angle method and the Wilhemy plate method. The behaviour of the dispersion should provide information for the development of a substrate-induced coagulation (SIC) coating process of nano-sized alumina in non-aqeous media. SIC is a dip-coating process that coats pretreated but chemically different surfaces with nano-sized particles. It was found that the anionic surfactant dioctyl sulfosuccinate (AOT) had no stabilizing effect on alumina dispersed in NMP.     

From rolling ball to complete wetting: the dynamic tuning of liquids on nanostructured surfaces

In this work, for the first time, a dynamic electrical control of the wetting behavior of liquids on nanostructured surfaces, which spans the entire possible range from the superhydrophobic behavior to nearly complete wetting, has been demonstrated. Moreover, this kind of dynamic control was obtained at voltages as low as 22 V. We have demonstrated that the liquid droplet on a nanostructured surface exhibits sharp transitions between three possible wetting states as a function of applied voltage and liquid surface tension. We have examined experimentally and theoretically the nature of these transitions. The reported results provide novel methods of manipulating liquids at the microscale.     

Competitive wetting of acetonitrile and dichloromethane in comparison to that of water on functionalized carbon nanotube surfaces

Differential wetting of pristine and ozonized carbon nanotubes has been studied using solvents like acetonitrile and dichloromethane in comparison to the well-known wetting behavior of water. Based on their unique structural and physical properties, functionalized CNT substrates have been used due to the fact that independent variation in molecular as well as electronic properties could be controlled by understanding the wetting of these liquids on carbon nanotubes (CNTs), both pristine as well as ozone treated. The sensitivity of the wetting behavior with respect to molecular interactions has been investigated using contact angle measurements while Raman and XPS studies unravel the differential wetting behavior. Charge-transfer between adsorbed molecules and CNTs has been identified to play a crucial role in determining the interfacial energies of these two liquids, especially in the case of acetonitrile. Ozone treatment has been observed to affect the surface properties of pristine CNTs along with a concomitant change in the wetting dynamics.     

Structural characterization of silica modified polyimide membranes

Polyimide and hybrid polyimide‐siloxane were synthesized by polycondensation, imidization, and sol‐gel reaction. The polyimides were prepared from pyromellitic dianhydride (PMDA) and 4,4‐oxydianiline (ODA) in N‐methyl‐2‐pyrollidone (NMP). Trimethoxyvinyl silane (TMVS) was used as a source of silica. Their surface morphologies, structures and thermal performances were determined using scanning electron microscopy (SEM), infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results showed that the silica particles were finely and rather homogeneously dispersed in polymers. The glass transition temperature (T_g) of hybrid membrane materials increased with the increasing silica content. TGA analysis showed that polyimides were thermally stable with silica. Modified polyimide‐siloxane films, thermal characteristics were found to be better than the polyimide films without silica. Copyright © 2006 John Wiley & Sons, Ltd.     

Membrane formation mechanism and permeation properties of a novel porous polyimide membrane

The transport properties of a novel porous fluorinated polyimide membrane fabricated by a wet phase inversion process were studied with a stirred dead‐end filtration cell. The porous membrane‐forming solvents were tetrahydrofuran (THF), acetone, N,N‐dimethylacetamide (DMAc), N‐methylpyrrolidone (NMP), N,N‐dimethylformamide (DMF), and dimethylsulfoxide (DMSO). The phase separation phenomena in a ternary system of polyimide/solvent/water were investigated from cloud point curves by a titration method and binary interaction parameters. Solvent–water demixing in the system has been found to play very important roles in determining the structure and surface morphology of the polyimide membrane. The porous fluorinated polyimide membranes showed pore sizes from 4 to 500 nm and permeation properties from ultrafiltration to a microfiltration range. In this study, we particularly focused on fouling of the polyimide membranes, because fouling decreases the flux and increases the resistance. Interestingly, the porous polyimide membrane showed excellent water flux recovery after water cleaning compared with that of the polyethersulfone (PSf) membrane, which suggest that for a 6FDA‐6FAP membrane, the protein–membrane and protein–protein interaction was not so strong compared with those in a PSf membrane. Copyright © 2002 John Wiley & Sons, Ltd.     

Engineering sticky superomniphobic surfaces on transparent and flexible PDMS substrate

Following the achievement of superhydrophobicity which prevents water adhesion on a surface, superomniphobicity extends this high repellency property to a wide range of liquids, including oils, solvents, and other low surface energy liquids. Recent theoretical approaches have yield to specific microstructures design criterion to achieve such surfaces, leading to superomniphobic structured silicon substrate. To transfer this technology on a flexible substrate, we use a polydimethylsiloxane (PDMS) molding process followed by surface chemical modification. It results in so-called sticky superomniphobic surfaces, exhibiting large apparent contact angles (>150°) along with large contact angle hysteresis (>10°). We then focus on the modified Cassie equation, considering the 1D aspect of wetting, to explain the behavior of droplets on these surfaces and compare experimental data to previous works to confirm the validity of this model.     

Surface induced hydrogen-bonded macrocluster formation of methanol on silica surfaces

Recently, we have succeeded in identifying the structure of the adsorption layer of ethanol on a silica surface in cyclohexane to be a hydrogen-bonded linear aggregate (polymer), which we call a surface molecular macrocluster. In this work, we studied the effect of the miscibility of liquids on the formation of the surface molecular macroclusters for confirming that this is a surface induced phenomenon. We investigated the interaction and the structure of methanol adsorbed on a silica surface in methanol-cyclohexane binary liquids by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode, and compared the results with those of the ethanol-cyclohexane and 1-propanol-cyclohexane binary liquids. The former system is immiscible at methanol concentrations of ca. 8-90 mol %, and the latter two are miscible at any composition. At 0.03 mol % methanol, which is far from the critical concentration for the phase separation, the contact of the methanol macrocluster layers formed on the silica surface brought about the attraction from a distance of 42 +/- 5 nm which was similar to that observed in ethanol-cyclohexane. At a methanol concentration of 9.0 mol %, above bulk phase separation, completely different force profiles were observed. These results demonstrated that the molecular macrocluster formation was different from the wetting induced by the bulk.