Densities, excess molar volumes, and viscosities of the binary and ternary mixtures of {diethylcarbonate (1) + p-chloroacetophenone (2) + 1-hexanol (3)} at 303.15 K for the liquid region and at ambient pressure

Densities ρ, dynamic viscosities η, of the ternary mixture (diethylcarbonate + p-chloroacetophenone + 1-hexanol) and the involved binary mixtures (diethylcarbonate + p-chloroacetophenone), (diethylcarbonate + 1-hexanol), and (p-chloroacetophenone + 1-hexanol) have been measured over the whole composition range at 303.15 K for the liquid region and at ambient pressure. The data obtained are used to calculate excess molar volumes V_m^E, excess partial molar volumes V¯_m,i^E, limiting excess partial molar volumes V¯_m,i^E,∞, and viscosity deviations Δη, of the binary and ternary mixtures. The data of excess molar volumes of the binary systems were fitted to the Redlich–Kister equation while for the ternary system the Cibulka equation was used. The McAllister's four body, and Kalidas and Laddha interaction models are used to correlate the kinematic viscosities of binary and ternary mixtures, respectively, to determine the fitting parameters and the standard deviations. The experimental data of the constitute binaries and ternary are analyzed to discuss the nature and strength of intermolecular interactions in these mixtures.     

Speeds of sound and isentropic compressibilities of (2-ethoxyethanol + ethylene glycol, diethylene glycol, triethylene glycol, and tetraethylene glycol) binary mixtures at 298.15 K

The speed of sound (u) has been obtained at a frequency of 8.3 MHz in {CH₃CH₂OCH₂CH₂OH + HOCH₂CH₂(OCH₂CH₂)_nOH}for n = 0, 1, 2, and 3 over the whole composition range of studied binary liquid mixtures, at T = 298.15 K. The speed of sound values were combined with those of our previous results for densities and viscosities to obtain isentropic compressibility (κ_s), free volume (V_f), and intermolecular free length (L_f). From all these data excess isentropic compressibility (κ_s^E), excess free volume (V_f^E) and excess intermolecular free length (L_f^E) as well as the deviations of the speed of sound (Δu) were obtained. The results are interpreted in terms of molecular interactions occurring in the solutions.     

Thermodynamic and structural properties of binary mixtures of some glycols with 2-butoxyethanol at T = (293.15, 298.15 and 303.15) K

Densities and relative permittivities at T = (293.15, 298.15, and 303.15) K in the binary mixtures of 2-butoxyethanol with ethylene glycol, diethylene glycol, triethylene glycol and tetraethylene glycol have been measured as a function of composition. From the experimental data excess molar volumes and deviations in relative permittivity have been calculated over the entire composition range. Both excess molar volumes and relative permittivity deviations have been correlated using Redlich–Kister type polynomial equation by the method of least-squares for the estimation of the binary coefficients and the standard errors. The experimental and calculated quantities were used to analyze the mixing behaviour of the components.     

Excess molar volumes, viscosities, and refractive indices for binary and ternary mixtures of {cyclohexanone (1) + N,N-dimethylacetamide (2) + N,N-diethylethanolamine (3)} at (298.15, 308.15, and 318.15) K

Densities ρ, viscosities η, and refractive indices n_D, of the binary and ternary mixtures formed by cyclohexanone + N,N-dimethylacetamide + N,N-diethylethanolamine were measured at (298.15, 308.15, and 318.15) K for the liquid region and at ambient pressure for the whole composition ranges. The excess molar volumes V_m^E, viscosity deviations Δη, and refractive index deviations Δn_D, were calculated from experimental densities and refractive indices. The excess molar volumes are positive over the mole fraction range for binary mixtures of cyclohexanone(1) + N,N-dimethylacetamide (2) and N,N-dimethylactamide (2) + N,N-diethylethanolamine (3) and increase with increasing temperatures from (298.15 to 318.15) K. The excess molar volumes of cyclohexanone (1) + N,N-diethylethanolamine (3) are S-shaped dependence on composition with negative values in the N,N-diethylethanolamine rich-region and positive values at the opposite extreme and increase with increasing temperatures from (298.15 to 318.15) K. The excess molar volumes are positive over the whole mole fraction ranges for the ternary mixtures at all temperatures. Viscosity deviations are negative over the mole fraction range for all binary and ternary mixtures and decrease with increasing temperatures from (298.15 to 318.15) K. Refractive index deviations are negative over the mole fraction range for all binary and ternary mixtures and increase with increasing temperatures from (298.15 to 318.15) K. The experimental data of constitute were correlated as a function of the mole fraction by using the Redlich–Kister equation for binary and , Cibulka, Jasinski and Malanowski , Singe et al., Pintos et al., Calvo et al., Kohler, and Jacob–Fitzner for ternary mixture, respectively. McAllister^'s three body, Hind, and Nissan–Grunberg models were used for correlating the kinematic and dynamic viscosity of binary mixtures. The experimental data of the constitute binaries are analyzed to discuss the nature and strength of intermolecular interactions in these mixtures.     

Volumetric, acoustic and spectroscopic studies for binary mixtures of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) with alkoxyalkanols at T = (288.15 to 318.15) K

Densities and speeds of sound have been measured for the binary mixtures of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆] with ethylene glycol monoethyl ether (EGMEE), diethylene glycol monoethyl ether (Di-EGMEE), triethylene glycol monoethyl ether (Tri-EGMEE) over the whole composition range at atmospheric pressure. Experimental densities have been used to estimate excess molar volumes, V^E. Changes in isentropic compressibility, Δκ_s have been estimated by using experimental speed of sound and density values. Excess properties were fitted to the Redlich-Kister polynomial equation to obtain the binary coefficients and the standard errors. The molecular scale interactions between ionic liquid and alkoxyalkanols have been investigated through ¹H NMR spectroscopy. NMR chemical shifts for hydroxyl group of alkoxyalkanols and their deviations show hydrogen bonding interactions of varying strengths between ionic liquid and alkoxyalkanol in their binary mixtures.     

Acoustical and excess properties of {1-hexanol + n-hexane, or n-octane, or n-decane} at (298.15, 303.15, and 308.15) K

Densities (ρ) and speeds of sound (u) for the binary mixtures of 1-hexanol with n-hexane, n-octane and n-decane have been measured over the entire composition range at 298.15, 303.15 and 308.15 K. The dynamic viscosities (η) for these systems have been measured at 298.15 K. From experimental data, excess molar volumes (V_m^E), molar isentropic compressibility (K_s,m), excess molar isentropic compressibility (K_s,m^E), deviation in speed of sound (u^D) from their ideal values (u^id) in an ideal mixture, and excess free volumes (V_f^E) have been calculated. The excess functions have also been correlated with the Redlich–Kister polynomial equation. The viscosity data have been analysed in terms of some semi-empirical equations. The theoretical values of speed of sound (u) and isentropic compressibility (κ_S) have also been estimated using the Prigogine–Flory–Patterson (PFP) theory with the van der Waals (vdW) potential energy model and the results have been compared with experimental values. The effect of chain-length of n-alkanes as well as the temperature on the excess properties has also been studied.     

Excess molar volumes and viscosities for binary mixtures of alkoxypropanols with 1-alkanols at 298.15 K

The excess molar volumes (V_m^E) and viscosities (η) for binary mixtures of dipropylene glycol tert-butyl ether with methanol, 1-propanol, 1-pentanol, and 1-heptanol and viscosities of dipropylene glycol monomethyl ether and dipropylene glycol monobutyl ether with methanol, 1-pentanol, and 1-heptanol have been reported at 298.15 K. The V_m^E are negative for the mixtures investigated. Sign and magnitude of V_m^E and viscosity deviations were used to analyze the mixing behavior of the components.     

Speeds of sound and isentropic functions of n-alkoxypropanol with 1-butanol and 2-butanol at 298.15 K

Speeds of sound have been measured as a function of composition for binary mixtures of propylene glycol monomethyl ether (1-methoxy-2-propanol), propylene glycol monoethyl ether (1-ethoxy-2-propanol), propylene glycol monopropyl ether (1-propoxy-2-propanol), propylene glycol monobutyl ether (1-butoxy-2-propanol), and propylene glycol tert-butyl ether (1-tert-butoxy-2-propanol), with 1-butanol, and 2-butanol, at 298.15 K and atmospheric pressure. The speeds of sound values were combined with those of our previous results for excess molar volumes converted to densities to obtain isentropic compressibility κ_S. Deviation in isentropic compressibility Δκ_S was evaluated using volume fraction weighting of the individual component properties to estimate ideal mixture behavior. The deviations u^D of the speed of sound from their values in an ideal mixture were also evaluated for all measured mole fractions. The speeds of sound results have been used to estimate the apparent molar isentropic compressibility at infinite dilution.     

Excess molar volumes of ternary mixtures {n-butylacetae + 1-butanol + 1, 2-butanediol} and {n-butylacetate + 1-butanol + 1, 3-butanediol} at T = 303.15 K

Excess molar volumes of the ternary systems formed by {n-butylacetate + 1-butanol + 1,2-butanediol } and {n-butylacetate + 1-butanol + 1,3-butanediol} were measured at 303.15 K for the whole composition range. The excess molar volumes, V_m^E, for binary mixtures of {n-butylacetate + 1-butanol, + 1,2-butanediol and + 1,3-butanediol} are positive and for the binary mixtures of {1-butanol + 1,2-butanediol and + 1,3-butanediol} are negative. Several empirical expressions are used to predict and correlate the ternary excess molar volumes from experimental results on the constituted binaries and analyzed to gain insight about liquid mixture interactions.     

Volumetric properties and viscosities of the 2-pyrrolidone + 1,2-propanediol + water ternary system and its binary constituents at T = 313.15 K

Densities and viscosities of ternary mixtures of 2-pyrrolidone + 1,2-propanediol + water and corresponding binary mixtures of 1,2-propanediol + water, 2-pyrrolidone + water and 2-pyrrolidone + 1,2-propanediol have been measured over the whole composition range at 313.15 K. From the obtained data, the excess molar volumes (V^E), the deviations in viscosity (Δη) and the excess Gibbs free energy of activation (ΔG^?E) have been calculated. The V^E, Δη and ΔG^?E results were correlated and fitted by the Redlich–Kister equation for binary mixtures and by the Cibulka equation for ternary mixtures, as a function of mole fraction. Several predictive empirical relations were applied to predict the excess molar volumes of ternary mixtures from the binary mixing data.     

Eley–Rideal reaction dynamics between O atoms on β-cristobalite (1 0 0) surface: A new interpolated potential energy surface and classical trajectory study

We present a theoretical study of the collisions of atomic oxygen with O-precovered β-cristobalite (1 0 0) surface. We have constructed a multidimensional potential energy surface for the O₂/β-cristobalite (1 0 0) system based mainly on a dense grid of density functional theory points by using the interpolation corrugation-reducing procedure. Classical trajectories have been computed for quasithermal (100–1500 K) and state-specific (e.g., collision energies between 0.01 and 4 eV) conditions of reactants for different O incident angles (θ_v). Atomic sticking and O_2(adsorbed) formation are the main processes, although atomic reflection and Eley–Rideal (ER) reaction (i.e., O₂ gas) are also significant, depending their reaction probabilities on the O incident angle. ER reaction is enhanced by temperature increase, with an activation energy derived from the atomic recombination coefficient (γ_O(θ_v = 0°, T)) equal to 0.24 ± 0.02 eV within the 500–1500 K range, in close agreement with experimental data. Calculated γ_O(θ_v = 0°, T) values compare quite well with available experimental γ_O(T) although a more accurate calculation is proposed. Chemical energy accommodation coefficient β_O(T) is also discussed as a function of ER and other competitive contributions.     

乙醚团簇的激光电离质谱及从头计算

应用激光多光子电离质谱与超声脉冲分子束技术研究了乙醚团簇，实验中观测到乙醚的碎片离子以及强度较小的(E)H⁺，(E)^＋₂和(E)₂H⁺(E代表CH₃CH₂OCH₂CH₃)，没有发现更大尺寸的团簇离子.结合从头计算理论，在B3LYP/6-311++G(d,p 关键词： 乙醚团簇 偶极-偶极相互作用 从头计算     

Nanoscale anglesite growth on the celestite (0 0 1) face

In situ atomic force microscopy (AFM) was used to study the growth behaviour of anglesite (PbSO₄) monolayers on the celestite (0 0 1) face. Growth was promoted by exposing the celestite cleavage surfaces to aqueous solutions that were supersaturated with respect to anglesite. The solution supersaturation, β_ang, was varied from 1.05 to 3.09 (where β_ang = a(Pb²⁺) · a(SO₄²⁻)/K_sp,ang). In this range of supersaturation, two single anglesite monolayers (3.5 Å in height each) from pre-existent celestite steps were grown. However, for solution supersaturation β_ang < 1.89 ± 0.06, subsequent multilayer growth is strongly inhibited. AFM observations indicate that the inhibition of a continuous layer-by-layer growth of anglesite on the celestite (0 0 1) face is due to the in-plane strain generated by the slight difference between the anglesite and celestite lattice parameters (i.e. the linear misfits are lower than 1.1%). The minimum supersaturation required to overcome the energy barrier for multilayer growth gave an estimate of the in-plane strain energy: 11.4 ± 0.6 mJ/m²_. Once this energy barrier is overcome, a multilayer Frank–Van Der Merwe epitaxial growth was observed.     

High-resolution synchrotron far-infrared spectroscopy of acrolein: The vibrational levels below 700 cm

The far-infrared spectrum of acrolein, CH₂CHCHO, is studied in the 100–360 cm⁻¹ region using continuum radiation from a synchrotron source. The combination of a very high resolution spectrometer, a long absorption path, and a low sample pressure, yields observed line widths of less than 0.0008 cm⁻¹. Observation of the ν₁₈ (157.9 cm⁻¹), and ν₁₃ (323.8 cm⁻¹) fundamental bands, together with six hot bands in the same regions, gives information on eight low-lying vibrational states of the molecule, including the Fermi and Coriolis interactions among them. Combining the present assignments with previous data on the ν₁₂ (564.34 cm⁻¹) and ν₁₇ (593.08 cm⁻¹) fundamental bands, all ten excited vibrational levels below 700 cm⁻¹ are analyzed in terms of one 1-state fit, two 2-state fits, and one 5-state fit.     

Structural and optical properties of nearly stress-free m-plane ZnO film on (1 0 0) γ-LiAlO2 with a GaN buffer layer by metal-organic chemical vapor deposition

m-plane ZnO film was epitaxially deposited on (1 0 0) γ-LiAlO₂ by metal-organic chemical vapor deposition at 600 °C with a GaN buffer layer. The epitaxial relationships between ZnO and GaN, GaN and (1 0 0) γ-LiAlO₂ were determined by X-ray diffraction Φ-scans. There exhibits very small decrease for the E₂ mode shift (0.3 cm⁻¹) of ZnO in the Raman spectrum, which indicates the epitaxial ZnO film was under a slight tensile stress (5.77 × 10⁷ Pa). Unlike the highly strained a-plane ZnO, temperature dependent photoluminescence spectra show that the free A exiton emission was observed with the temperature ≤138 K.     

Water incorporation into the Ba2(In1 − xMx)2O5‪ (M = Sc 0 ≤ x < 0.5 and M = Y 0 ≤ x < 0.35) system and protonic conduction

Ba₂(In_1 − xM_x)₂O_{5 − y / 2}(OH)_y‪□_{1 − y / 2} (y ≤ 2; M = Sc³⁺ 0 ≤ x < 0.5 and M = Y³⁺ 0 ≤ x < 0.35) compounds were prepared by reacting Ba₂(In_1 − xM_x)₂O₅‪ phases with water vapor. This reaction is reversible. Analyses of the hydration process by TG and XRD studies show that the thermal stability of hydrated phases increases when x increases and that the incorporation of water is not a single-phase reaction inducing either a crystal system or space group modification. Fully hydrated (y = 2) and dehydrated (y = 0) samples have been stabilized at room temperature and characterized for all compositions. In wet air, all phases show a proton contribution to the total conductivity at temperatures between 350 and 600 °C. At a given temperature, proton conductivity increases with the substitution ratio and reaches at 350 °C, 5.4 10^− 3 S cm^− 1 for Ba₂(In_0.65Sc_0.35)₂O_4.2□_0.2(OH)_1.6.     

Ab initio study of the chemical states of water on Cr2O3(0 0 0 1): From the isolated molecule to saturation coverage

The reactivity of the (0 0 0 1)-Cr–Cr₂O₃ surface towards water was studied by means of periodic DFT + U. Several water coverages were studied, from 1.2H₂O/nm² to 14.1H₂O/nm², corresponding to ¼, 1, 2 and 3 water/Cr at the (0 0 0 1)-Cr₂O₃ surface, respectively. With increasing coverage, water gradually completes the coordination sphere of the surface Cr atoms from 3 (dry surface) to 4 (1.2 and 4.7H₂O/nm²), 5 (9.4H₂O/nm²) and 6 (14.1H₂O/nm²). For all studied coverages, water replaces an O atom from the missing above plane. At coverages 1.2 and 4.7H₂O/nm², the Cr–O_s (surface oxygen) acid–base character and bond directionality govern the water adsorption. The adsorption is molecular at the lowest coverage. At 4.7H₂O/nm², molecular and dissociative states are isoenergetic. The activation energy barrier between the two states being as low as 12 kJ/mol, allowing protons exchanges between the OH groups, as evidenced by ab inito molecular dynamics at room temperature. At coverages of 9.4 and 14.1H₂O/nm², 1D- (respectively, 2D-) water networks are formed. The resulting surface terminations are –Cr(OH)₂ and –Cr(OH)₃– like, respectively. The increased stability of those terminations as compared to the previous ones are due to the stabilization of the adsorbed phase through a H-bond network and to the increase in the Cr coordination number, stabilizing the Cr (t_2g) orbitals in the valence band. An atomistic thermodynamic approach allows us to specify the temperature and water pressure domains of prevalence for each surface termination. It is found that the –Cr(OH)₃-like, –Cr(OH)₂ and anhydrous surfaces may be stabilized depending on (T, P) conditions. Calculated energies of adsorption and OH frequencies are in good agreement with published experimental data and support the full hydroxylation model, where the Cr achieves a 6-fold coordination, at saturation.     

Energy dependence of the C(O, α) reaction

The energy dependence of the ¹²C(¹⁶O, α) reaction was measured at incident energies of E_lab=112−191 MeV. In the range ofE_x(²⁴Mg)=30−56 MeV, the excitation energies of the structures in the inclusive α spectrum were found to vary continuously as a function of incident energy in this region. This fact indicates that these structures do not represent excitations in ²⁴Mg, but rather that they originate from a different process such as a sequential ejectile decay.     

Solubility and acid-base properties and activity coefficients of chitosan in different ionic media and at different ionic strengths, at T = 25 °C

Studies on the acid-base properties and solubility of a polyammonium polyelectrolyte (chitosan) with different molecular weights (MW 310 and 50 kDa), were performed at T = 25 °C, in the pH range 2.5–7. The protonation of chitosan was investigated by potentiometry ([H⁺]-glass electrode) in NaCl, NaNO₃ and mixed NaNO₃ + Na₂SO₄ ionic media, at different ionic strengths. Protonation constants were calculated as a function of dissociation degree α by means of two different models, namely, a simple linear model and the modified Henderson–Hasselbalch equation. Experimental data were also fitted using a model independent of α (Diprotic-like model), according to which the acid-base properties can be simply described by two protonation constants in all the acidic pH range. The dependence on ionic strength of protonation constants in NaCl aqueous solution was modelled by Specific ion Interaction Theory (SIT). The ion pair formation between protonated chitosan and Cl⁻, NO₃⁻ and SO₄²⁻ was also considered, and the relative formation constants are reported.Solubility investigations were performed in NaCl aqueous solutions in a wide range of ionic strength (0.1 < I/mol L^− 1 < 3.0), with the aim to determine the activity coefficients of neutral species and the Setschenow coefficient of chitosan 310 kDa.     

High-resolution infrared study of the 2ν3 (A1, E) and ν1 + ν3 (E) bands of NF3

The 2ν₃ overtone (A₁, E) and the ν₁ + ν₃ (E) combination bands of the oblate symmetric top ¹⁴NF₃ were studied by FTIR spectroscopy with a resolution of 2.5 × 10⁻³ cm⁻¹. Nearly 500 lines up to K_max/J_max = 30/43 were observed for the weak A₁ component reaching the v₃ = 2⁰ substate (1803.1302 cm⁻¹), the majority of which corresponded to reinforced K = 3p-type transitions. For the strong E component reaching the v₃ = 2^±2 substate (1810.4239 cm⁻¹), about 3550 transitions were assigned up to K_max/J_max = 65/69, favoring a clear observation of the ℓ(4, −2) and ℓ(4, 4) splittings within the kℓ = −2 and +4 sublevels, respectively. The two v₃ = 2 substates are linked by the ℓ(2, 2)- and ℓ(2, −1)-type interactions, providing severe crossings, respectively, at K′ = 6 and near K′ = 24 on the v₃ = 2⁺² side. A model working in the D-reduction and including all these ℓ-type interactions could reproduce together 3695 nonzero weighted experimental data (NZW) through 33 free parameters with a standard deviation of σ = 0.357 × 10⁻³  cm⁻¹. As for the ν₁ + ν₃ (E) combination band, about 3690 lines were assigned up to K_max/J_max = 45/55. Its v₁ = v₃ = 1 upper state (1931.577 5 cm⁻¹) was treated using the same model recently applied to the v₃ = 1 (E, 907.5413 cm⁻¹) state. It yielded 21 free parameters through 3282 NZW experimental data, adjusted with σ = 0.344 × 10⁻³  cm⁻¹ in the D-reduction. For the two excited states, the small and unobserved ℓ(0, 6) interaction was tested as useless. To confirm the adequacy of the vibrationally isolated models used, some other reductions of the Hamiltonian were tried. For the v₃ = 2 state, the D-, L-, and LD-reductions led to similar σ’s, while the Q one was not successful. For the v₁ = v₃ = 1 state, the D- and Q-reductions gave comparable σ’s, while the QD-reduction was not as good. The corresponding unitary equivalence relations are generally more nicely fulfilled for the v₃ = 2 state than for the v₁ = v₃ = 1 state. The three derivable anharmonicity constants in cm⁻¹ are x₃₃ = −4.1528, g₃₃ = +1.8235 and x₁₃ = −7.9652.