Keggin结构杂多酸盐的合成、表征及催化燃油超深度脱硫

以六种金属盐和磷钨酸为原料制备了Keggin结构杂多酸盐Mx/nH0.6PW(Zr0.6H0.6PW、Al0.8H0.6PW、Zn1.2H0.6PW、Fe0.8H0.6PW、Ti0.6H0.6PW和Sn0.6H0.6PW)和Alx/3H3-xPW(AlPW、Al0.8H0.6PW、Al0.5H1.5PW、Al0.3H2.1PW和Al0.1H2.7PW)催化剂,并对催化剂进行了FTIR、XRD、DSC/TGA、ICP等表征。对催化剂进行催化活性筛选后,确定Al0.5H1.5PW为最佳催化剂。研究了以Al0.5H1.5PW为催化剂,过氧化氢为氧化剂,乙腈为萃取剂的催化氧化萃取燃油超深度脱硫技术。考察了催化剂用量、氧硫比、催化剂与氧化剂预接触时间、反应温度和初始硫含量对脱硫效果的影响。结果表明,在催化剂用量为模拟油品质量的0.25%,氧硫比为10,催化剂与过氧化氢预接触8 min,反应温度60℃,初始硫含量为350 mg·L-1的条件下,反应到60 min时硫含量已降至2.5 mg·L-1,脱硫率达99.3%。催化氧化萃取时的脱硫率比单纯萃取时的脱硫率高45.3%,效果十分显著。此外,催化剂用于真实汽、柴油的催化氧化脱硫实验也得到了很好的脱硫效果,且催化剂重复使用5次后,脱硫效率未见明显降低。     

纳米Ce1—xMnxO2催化剂上乙醇催化氧化发光研究

研究了纳米Ce_1—xMn_xO₂上乙醇催化氧化发光特性, 重点考察了反应温度和催化剂组成(Ce/Mn比)对发光强度的影响规律. 为研究催化发光机理, 在相近的反应条件下考察了纳米Ce_1—xMn_xO₂上乙醇催化氧化反应的活性和选择性. 结果表明: 催化发光强度与催化反应中生成CH₃CHO的产率有很好的顺变关系, 表明CH₃CHO是导致C₂H₅OH分子在纳米Ce_1—xMn_xO₂催化剂上氧化发光的“活性分子”.     

Pt/ZrO2-Al2O3催化剂催化氧化C3H6和CO性能

采用共沉淀法合成了ZrO₂与Al₂O₃的不同质量比的ZrO₂-Al₂O₃复合氧化物,并以此为载体通过等体积浸渍法制备了1.5% Pt/ZrO₂-Al₂O₃（w/w）催化剂。以C₃H₆和CO为反应物的催化性能评价显示,在系列催化剂中以Pt/Zr（0.4）-Al催化剂催化氧化活性最为优异,其C₃H₆和CO的起燃温度（T₅₀）小于125℃,完全转化温度（T₉₀）小于150℃。采用XRD、低温N₂吸附、H₂-TPR、CO脉冲吸附等分析表征技术探索了催化剂物相结构、比表面积、颗粒尺寸等对催化活性的影响规律。结果发现,ZrO₂-Al₂O₃复合氧化物具有Al₂O₃材料的介孔织构和大比表面积特性,且产生了Al_xZr_1-xO_y固溶体新物相。适当的ZrO₂与Al₂O₃的质量比,是改善Pt与ZrO₂-Al₂O₃的相互作用强度,促进贵金属Pt的分散,提升Pt/ZrO₂-Al₂O₃催化剂的低温氧化活性的关键。     

富氧条件下Co/ZSM-5催化剂对C3H8选择还原NOx的性能

采用多种物理化学手段研究了在模拟的轻型柴油车尾气中不同Co担载量及Cu掺杂的Co/ZSM-5催化剂的Co组分分散状态、可还原性、NO吸附脱附性质对C₃H₈选择性催化还原NO_x性能的影响。结果表明,浸渍法制备的Co/ZSM-5催化剂上既有外表面上的Co³⁺和Co²⁺物种,也有孔内的Co²⁺离子。富氧条件下Co/ZSM-5催化剂上C₃H₈选择性催化还原NO_x的活性主要与ZSM-5载体孔外表面分散的CoO_x物种中的钴离子可还原能力和NO吸附脱附性能密切相关。Co/ZSM-5催化剂上适宜的Co担载量约为4.0wt%,低担载量时随Co担载量增加,表面CoO_x物种中钴离子可还原能力增强,C₃H₈选择性催化还原NO_x的低温转化活性增加;高担载量时,随Co担载量增加,单位Co离子的NO吸附量的减少以及催化剂表面活性中心数的减少,导致了Co/ZSM-5催化剂NO_x的转化率和催化剂比速率（k）的下降。孔外表面Co₃O₄晶体的存在使催化剂表面产生较强的NO吸附,并在高温时有利于C₃H₈的氧化燃烧,使C₃H₈选择性催化还原NO_x的活性降低。     

Pt/ZrO2-Al2O3催化剂催化氧化C3H6和CO性能

采用共沉淀法合成了ZrO₂与Al₂O₃的不同质量比的ZrO₂-Al₂O₃复合氧化物,并以此为载体通过等体积浸渍法制备了1.5% Pt/ZrO₂-Al₂O₃（w/w）催化剂。以C₃H₆和CO为反应物的催化性能评价显示,在系列催化剂中以Pt/Zr（0.4）-Al₂O₃催化剂催化氧化活性最为优异,其C₃H₆和CO的起燃温度（T₅₀）小于125℃,完全转化温度（T₉₀）小于150℃。采用XRD、低温N₂吸附、H2-TPR、CO脉冲吸附等分析表征技术探索了催化剂物相结构、比表面积、颗粒尺寸等对催化活性的影响规律。结果发现,ZrO₂-Al₂O₃复合氧化物具有Al₂O₃材料的介孔织构和大比表面积特性,且产生了Al_xZr_1-xO_y固溶体新物相。适当的ZrO₂与Al₂O₃的质量比,是改善Pt与ZrO₂-Al₂O₃的相互作用强度,促进贵金属Pt的分散,提升Pt/ZrO₂-Al₂O₃催化剂的低温氧化活性的关键。     

酸处理对CuY催化剂孔结构及氧化羰基化性能的影响

对NaY分子筛(n_Si/n_Al=2.65)进行了草酸脱铝处理并作为载体采用液相离子交换法制备CuY催化剂,应用于常压甲醇氧化羰基化合成碳酸二甲酯(DMC)反应。NaY分子筛及其CuY催化剂通过N₂低温吸附-脱附、透射电子显微镜、X射线衍射、²⁹Si固体核磁共振、NH₃吸附程序升温脱附、吡啶吸附红外光谱、H₂程序升温还原、原子吸收等方法进行表征。研究结果表明,酸处理NaY分子筛后,骨架铝被脱除,导致骨架n_Si/n_Al比增加、相对结晶度降低并产生介孔,有利于产物分子的扩散,从而影响催化活性。采用4 h、2 mol·L^-1草酸处理NaY分子筛作为载体制备的CuY催化剂显示出较高的催化性能,DMC时空收率和甲醇转化率分别从103.6 mg·g^-1·h^-1和6.3%增加到184.9 mg·g^-1·h^-1和10.2%。产生的介孔能够促进催化剂中铜活性位的可接近性及反应物分子和产物分子的扩散。     

La1－xSrxNi1－yFeyO3型钙钛矿双功能氧电极的电化学性能研究

采用溶胶-凝胶法制备了一系列La_1－xSr_xNi_1－yFe_yO₃ (x＝0, 0.1, 0.2, 0.5; y＝0～1.0)型的钙钛矿催化剂, 以活性碳为载体, PTFE乳液为粘接剂制备双功能氧电极. 对催化剂进行了XRD结构分析以及SEM分析和BET比表面积测量. 采用三电极体系测试了氧电极的稳态极化曲线和电化学交流阻抗谱并对其阴极极化和阳极极化的交流阻抗谱图进行分析. 通过等效电路的拟合研究了该系列双功能氧电极氧还原反应的工作机理. 实验表明对于LaNiO₃化合物, B位掺杂可显著提高催化剂的电催化性能; 电极氧还原反应的极化主要由电荷转移反应和Nernstian扩散过程造成. 通过各个电极对于催化分解H₂O₂的分解速率常数的测定得知, Ni离子对于催化H₂O₂分解反应的活性大于Fe离子, 继续在对于氧还原反应和氧析出反应都具有较高电催化活性的LaNi_0.8Fe_0.2O₃催化剂上进行A位掺杂Sr离子后显著提高了催化剂分解H₂O₂的催化活性, 主要是因为氧空位的增多和金属离子d电子含量的降低有利于催化分解H₂O₂的活性的提高, 但由于氧空位的增多导致催化剂电导率的降低, 所以其电催化活性降低了. 通过多圈循环伏安扫描的测试, 催化剂LaNi_0.8Fe_0.2O₃有很好的稳定性.     

酸处理对CuY催化剂孔结构及氧化羰基化性能的影响

对NaY分子筛(n_Si/n_Al=2.65)进行了草酸脱铝处理并作为载体采用液相离子交换法制备CuY催化剂, 应用于常压甲醇氧化羰基化合成碳酸二甲酯(DMC)反应。NaY分子筛及其CuY催化剂通过N₂低温吸附-脱附、透射电子显微镜、X射线衍射、²⁹Si固体核磁共振、NH₃吸附程序升温脱附、吡啶吸附红外光谱、H₂程序升温还原、原子吸收等方法进行表征。研究结果表明, 酸处理NaY分子筛后, 骨架铝被脱除, 导致骨架n_Si/n_Al比增加、相对结晶度降低并产生介孔, 有利于产物分子的扩散, 从而影响催化活性。采用4 h、2 mol·L^-1草酸处理NaY分子筛作为载体制备的CuY催化剂显示出较高的催化性能, DMC时空收率和甲醇转化率分别从103.6 mg·g^-1·h^-1和6.3%增加到184.9 mg·g^-1·h^-1和10.2%。产生的介孔能够促进催化剂中铜活性位的可接近性及反应物分子和产物分子的扩散。     

Ni-intAlx催化剂的化学合成及萘选择加氢性能

非（类）金属掺杂金属形成金属间隙或金属间化合物是一种设计高效、高选择性催化剂的重要手段.我们以萘基锂为强还原剂,NiCl₂与AlCl₃为原料,在室温下化学合成了Ni-^intAl_x纳米催化剂,并采用pXRD、N₂物理吸附、XPS、TEM、H₂-TPR、H₂-TPD等手段对催化剂进行表征.以萘选择加氢为探针反应,结果显示Ni-^intAl_x催化剂对萘选择加氢制四氢萘具有高活性及单一选择性.其中Ni-^intAl₁催化剂具有比Ni样品更纯的FCC晶型,比Ni-^intAl_1/3更适宜的铝掺杂量,及比Ni-^intAl₃更适宜的活性组分含量.镍铝之间的电子效应在一定程度上可调变中间产物四氢萘的吸附性能,避免过度加氢,在优化条件下萘转化率和四氢萘选择性分别达97%和98%,铝可用作第二金属掺杂以提高金属位点的活性和对中间产物的选择性.     

铈钛混合氧化物负载磷钨酸吸附-分解NOx性能

通过软化学途径合成了铈钛混合氧化物(CeO₂-TiO₂)载体材料, 并分别通过等体积浸渍法和机械研磨法负载磷钨酸(H₃PW₁₂O₄₀)。采用FTIR、XRD、SEM和BET比表面积测定对CeO₂-TiO₂及负载型多酸催化剂进行了表征;考察了负载量、负载方法、吸附温度等因素对催化剂吸附NO_x效率的影响;选取吸附性能最佳的催化剂进行了NO_x催化分解实验, 探讨了NO_x吸附-分解机理。结果表明:相对于等体积浸渍法, 机械研磨法更适合此类载体负载H₃PW₁₂O₄₀, 其NO_x吸附效率均高于H₃PW₁₂O₄₀及载体本身;在0~60%的负载量范围内, 随着H₃PW₁₂O₄₀负载量的增加, 负载型催化剂吸附NO_x的效率呈上升趋势, 负载量为40%时NO_x吸附效率最佳, 达90%;吸附过程中NO_x与催化剂活性组分H₃PW₁₂O₄₀发生作用, 生成NOH⁺, H₃PW₁₂O₄₀二级结构中结晶水对催化剂吸附NO_x有重要作用;当温度从150℃升至 450℃时, 被吸附的NO_x发生分解, 分解产物的组成与N₂的收率均受升温速率的影响, 升温速率越快, N₂收率越高。向吸附分解NO_x后的催化剂床层通入含有水蒸气的空气, 可有效补充NO_x分解过程中H₃PW₁₂O₄₀失去的结晶水, 从而恢复催化剂优良的NO_x吸附分解性能, 实现催化剂的有效再生利用。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.