A study on the solvent extraction of Pd/II/ with 1,2,3-benzotriazole into methyl iso-butyl ketone

A novel method has been developed for the extraction of Pd/II/ with 1,2,3-benzotriazole /1,2,3-BT/ into methyl isobutyl ketone /MIBK/ at a pH of 4.0. The effects of pH, time of equilibration, solvent, anions and cations on the extraction coefficient have been evaluated. The stoichiometry of the extracted species of 12 was obtained by the slope ratio method and by the method of substoichiometric extraction. Separation factors and decontamination factors for a number of elements in the extraction of Pd/II/ were also obtained.     

Radiochemical separation of Mn/II/ with 1,2,3-benzotriazole into 1-octanol employing solvent extraction technique

1,2,3-Benzotriazole /1,2,3-BT/ has been used for the radiochemical separation of Mn/II/ employing solvent extraction technique. Based on various parameters such as pH effect, time of equilibration and effect of various solvents, etc. the ideal conditions for the extraction of Mn/II/ was evaluated. The stoichiometry of the metal to reagent was determined by the substoichiometric extraction and slope-ratio method and found to be 12. The effect of anions on the extraction value of Mn/II/ revealed that a large number of anions do not interfere. Separation factors for various elements were also studied and the extraction found to be selective.     

A study on the solvent extraction of Cd/II/ with 1,2,3 benzotriazole into n-heptanol

The extraction of cadmium/II/ with 1,2,3 benzotriazole /2-BT/ into n-heptanol has been studied. The effect of various parameters such as effect of pH, time of equilibration, effect of anions on the extraction coefficient values have been evaluated. The stoichiometry of the extracted species by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for a number of elements in the substoichiometric extraction of Cd/II/ were also obtained.     

Solvent extraction of Au/III/ with 1,2,3-benzotriazole into n-butanol

Aqueous 1,2,3-benzotriazole/1,2,3-BT/ has been used for the extraction of Au/III/ from acidic medium into n-butanol. The extraction of Au/III/ was found to be better than 98% over the pH range 2.0–7.0 and an equilibration time of 2.0 min. The effect of anions and cations on the extraction coefficient has been studied. The stoichiometry of metal: reagent determined by the slope ratio method was found to be 13. Separation factor for many elements in the extraction of Au/III/ has been evaluated.     

Solvent extraction of Zn/II/ with 1,2,3-benzotriazole into n-hepatanol

A method based on solvent extraction has been developed for the radiochemical separation of Zn/II/ from other elements employing 1,2,3-benzotriazole as a complexing agent and n-heptanol as an extractant. Optimum conditions for the extraction have been established. The effect of various anions and cations on the extraction coefficient value of Zn/II/ has been studied. The stoichiometry of the metal to reagent determined by the method of substoichiometric extraction and slope-ratio method was found to be 12.     

A new and rapid method for the solvent extraction of Ru/III/ with 1,2,3-benzotriazole into 1-pentanol

A new and rapid method has been developed for the quantitative extraction of Ru/III/ with 1,2,3-benzotriazole /1,2,3-BT/ into 1-pentanol. The extraction coefficient value of Ru/III/ between 1-pentanol and an aqueous 5% solution of 1,2,3-BT in 2M sodium acetate-acetic acid buffer showed a maximum value of E=46 at pH 4.5. The effect of various other parameters on the extraction coefficient of Ru/III/ such as solvents, anions, cations, etc. have also been studied. The stoichiometry of metal:reagent determined by the method of substoichiometric extraction and slope ratio method was found to be 13. Decontamination factors for many elements in the substoichiometric extraction of Ru/III/ were also evaluated.     

A study on the solvent extraction of Ag/I/ with 1,2,3-benzotriazole in chloroform

A rapid and selective method has been developed for the substoichiometric extraction of Ag/I/with 1,2,3-benzotriazole /1,2,3-BT/ in chloroform in the presence of versenate. The effect of various parameters such as pH, time of equilibration, solvent, anions, cations, etc., on the extraction coefficient value has been studied. The stoichiometry of the extracted species of 11 /Ag:1,2, 3-BT/ was obtained by the slope ratio method and substoichiometric extraction. Decontamination factors for most elements in the substoichiometric extraction of Ag/I/ were found to be higher than 10⁴.     

A study on solvent extraction of Cu/II/ with 2-mercaptobenzothiazole into chloroform

A method has been developed for the rapid and selective extraction of Cu/II/ with 2-mercaptobenzothiazole /2-HMBT/ into chloroform. The effect of various parameters on the extractioncoefficient value have been studied. The stoichiometry of the extracted species of 12 /Cu2-HMBT/ was obtained by the slope ratio method and by the method of substoichiometric extraction.     

Solvent extraction of Fe/III/ with 1,2,3-benzotriazole into n-heptanol

A new and rapid method has been developed for the quantitative extraction of Fe/III/ with 1,2,3-benzotriazole /1,2,3-BT/ into n-heptanol. The extaction coefficient value of Fe/III/ between n-heptanol and an aqueous 1% solution of 1,2,3-BT was found to be better than 99% over the pH range of 7.3 to 8.0 for an equilibration time of 2.0 min. The effect of various other parameters on the extraction coefficient value of Fe/III/ such as solvents, anions and cations etc. has also been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope-ratio method was found to be 13. Separation factors for most of the elements studied were better than 10³.     

Solvent extraction of Ni/II/ with isonitrosobenzoylacetone into chloroform

A method has been developed for the quantitative extraction of Ni/II/ with isonitrosobenzoylacetone /HINBA/ into chloroform. The effect of various parameters on the extraction coefficient value such as pH, time of equilibration, effect of solvents, anions, cations etc. have been studied. The stoichiometry of the metal: reagent determined by the method of substoichiometric extraction and slope ratio method was found to be 12. Decontamination factors for many elements in the substoichiometric extraction of Ni/II/ were also evaluated.     

Radiochemical separation of Pd/II/ with isonitrosobenzoylacetone in benzene

The reagent isonitrosobenzoylacetone /HINBA/ was used for the radiochemical separation of Pd/II/ employing solvent extraction. Based on various parameters such as effect of molarity of the acid, time of equilibration and effect of various solvents; the extraction coefficient value of Pd/II/ has been evaluated. The stoichiometry of the metal to reagent was determined by the substoichiometric extraction and slope-ratio method and was found to be 12.     

Solvent extraction of Co/II/ with isonitrosobenzoylacetone into chloroform

A rapid and selective method has been developed for the extraction of Co/II/ with isonitrosobenzoylacetone into chloroform. The effect of various parameters on the extraction coefficient value such as effect of pH, time of equilibration, effect of various cations and anions have been evaluated. The stoichiometry of metal to reagent determined by the method of substoichiometric extraction was found to be 12. It was further supported by the slope ratio method.     

Solvent extraction of In/III/ with 1,2,3-bezotriazole into n-heptanol

Aqueous 1,2,3-benzotriazole has been used for the extraction of In/III/ in alkaline medium. The extraction of In/III/ was found to be better than 99% over the pH range 5.0–10.0 and an equilibration time of 2.0 min. The effect of anions and cations on the extraction coefficient has been studied. The stoichiometry of metal: reagent determined by the slope-ratio method was found to be 13. Separation factors for around 20 elements were better than 10³.     

Substoichiometric determination of copper by neutron-activation analysis

A rapid and selective method has been developed for the determination of Cu in complex matrices by thermal neutron-activation analysis employing substoichiometric extraction with 1,2,3-benzotriazole /1,2,3-BT/ into chloroform. The time required for radiochemical purification and counting of two samples was 2 h. 1.015 g Cu can be determined with an accuracy of 6.40% and a purification of 5.26%.     

Solvent extraction of Zn(II), Cu(II) and Sb(III) with N-m-tolyl-p-methoxybenzohydroxamic acid (TMBHA) into chloroform

Rapid methods have been described for the quantitative extraction of milligram amounts of Zn(II), Cu(II) and Sb(III) with TMBHA into chloroform. The separation factor for many elements was found to be at least greater than 10⁴. The metal: reagent stoichiometry determined by methods like slope ratio, mole ratio and substoichiometric extraction were found to be 12 for Zn(II) and Cu(II), and 23 for Sb(III).     

A study on the solvent extraction of Hg/II/ with 2-mercaptobenzothiazole into chloroform

The extraction of mercury/II/ with 2-mercaptobenzothiazole /2-HMBT/ into chloroform has been studied. The effect of various parameters on the extraction coefficient value such as effect of pH, time of equilibration, effect of anions and cations have been evaluated. The stoichiometry of the extracted species obtained by the method of substoichiometric extraction and slope ratio method was found to be 1∶2. Decontamination factors for a number of elements in the substoichiometric extraction of Hg/II/ were also obtained.     

Dispersive liquid-liquid microextraction of Fe(II) and Cu(II) with diethyldithiocarbamate and their simultaneous spectrophotometric determination using mean centering of ratio spectra

A new dispersive liquid-liquid microextraction (DLLME) method for preconcentration of trace quantities of Fe(II) and Cu(II) followed by their spectrophotometric determination has been developed. For the extraction, an appropriate mixture of ethanol (the disperser solvent) and carbon tetrachloride (the extraction solvent) was injected rapidly into the water sample containing Fe(II) and Cu(II) after formation of complexes with diethyldithiocarbamate. Mean centering (MC) of ratio spectra has been used for simultaneous determination of Fe(II) and Cu(II). Linear range of the method is 1.0–100 ng/mL for Fe(II) and 0.3–100 ng/mL for Cu(II), the detection limit is 0.53 ng/mL and 0.14 ng/mL Cu(II), resp. The interference effect of some anions and cations is reported. The method was applied to the determination of Fe(II) and Cu(II) in well water samples.     

Solvent extraction of cobalt/II/with 2,4-dihydroxyacetophenone thiosemicarbazone

The extraction of cobalt/II/ from ammonium chloride-ammonium hydroxide buffer solutions of pH 6.5 by 2,4-dihydroxyacetophenone thiosemicarbazone /DATS/ in n-butanol has been studied. Cobalt/II/ forms 11 complex /metal:reagent/ with DATS. Addition of pyridine enhances the extraction. The influence of metal concentration and the effect of diverse ions on the extraction of cobalt/II/ have been investigated.     

Liquid-liquid extraction of copper (I) and copper (II) as ion-paired complexes with acyclic 2-thienyl-containing polythioether and triphenylmethane dye anion

Three acyclic polythioethers containing 2-thienyl units at both ends were synthesized and the effect of substituent on the extraction of copper(II) was studied. The methyl groups in the terminal thiophene ring have imparted an appreciable degree of increase in the percent extraction of copper(II), while the introduction of chlorine atoms into the 2-thienyl unit resulted in the reverse effect. Among the counter dye anions examined, tetrabromophenolphthalein ethylester was the best one for copper(II) extraction. The composition of extracted species was evaluated to be 122 (Cu(II)/polythioether/dye anion). Quantitative extraction of copper(I) was attained as complexes with various triphenylmethane dyes, i.e., bromocresol green, bromothymol blue, bromo-phenol blue and pyrogallol red. Copper(I) in organic phase was completely back-extracted with 2 mole/l sulfuric acid containing 10% hydrogen peroxide.     

Solvent extraction of Mn/II/ with 2-propionyl, 1-naphthol oxime/2-PRONAPOX/ into chloroform

A rapid method has been described for the quantitative extraction of milligram amounts of Mn/II/ with 2-PRONAPOX into CHCl₃. The extraction coefficient /E/ of Mn/II/ between CHCl₃ and aqueous solution containing 0.2M NH₄Cl shows a maximum value of E=143 at pH 10.5. The percentage extraction is better than 98% in the pH range from 9 to 11 and an equilibration time of 6 min. The effects of anions and cations have been studied. The stoichiometry of metal: reagent determined by substoichiometric extraction and slope ratio method is found to be 12. The decontamination factors for most of the elements are better than 10⁴ in the substoichiometric extraction of Mn/II/.