Thermal Decomposition Modes for Four‐Coordinate Ruthenium Phosphonium Alkylidene Olefin Metathesis Catalysts

The four‐coordinate ruthenium phosphonium alkylidenes 1‐Cy and 1‐iPr , differing in the substituent on the phosphorus center, were observed to decompose thermally in the presence of 1,1‐dichloroethylene to produce [H₃CPR₃][Cl]. The major ruthenium‐containing product was a trichloro‐bridged ruthenium dimer that incorporates the elements of the 1,1‐dichloroethylene as a dichlorocarbene ligand and a styrenic vinyl group on the supporting NHC ligand. Spectroscopic, kinetic, and deuterium‐labeling experiments probed the mechanism of this process, which involves a rate‐limiting C–H activation of an NHC mesityl ortho methyl group. These studies provide insight into intrinsic decomposition processes of active Grubbs type olefin metathesis catalysts, pointing the way to new catalyst design directions.     

Ruthenium(II) unsymmetrical N2O2 tetradentate Schiff-base complexes: synthesis,characterization, and catalytic studies

A series of six-coordinate ruthenium(II) complexes [Ru(CO)(L ^x )(B)] (B = PPh₃, AsPh₃ or Py; L ^x = unsymmetrical tetradentate Schiff base, x = 5–8; L⁵= salen-2-hyna, L⁶= Cl-salen-2-hyna, L⁷= valen-2-hyna, L⁸= o-hyac-2-hyna) have been prepared by reacting [RuHCl(CO)(EPh₃)₂(B)] (E = P or As) with unsymmetrical Schiff bases in benzene under reflux. The new complexes have been characterized by analytical and spectroscopic (infrared, electronic, ¹H, ³¹P, and ¹³C NMR) data. An octahedral structure has been assigned for all the complexes. The new complexes are efficient catalysts for the transfer hydrogenation of ketones and also exhibit catalytic activity for the carbon–carbon coupling reactions.     

Development of Methane Decomposition Catalysts for CO<Subscript>x</Subscript> Free Hydrogen

Now-a-days, catalytic decomposition of methane (CDM) into hydrogen and carbon is a promising technique for production of fuel cell grade hydrogen. The Ni based catalysts seems promising particularly for the production of CO_x free H₂ by methane decomposition process. The CDM activity and longevity of the Ni based catalysts are mainly influenced by the amount of Ni and type of support material. In this paper the CDM activity results are correlated with NiO crystallite size, Ni metal surface area and acidity of the catalysts. In case of bimetallic catalysts addition of Cu to Ni catalysts lead to enhance the CDM activity at higher temperature thus resulting in the increased concentration of hydrogen in the outlet stream. Finally, some of the carbon-based catalysts are studied for methane decomposition activity at higher temperature. The surface changes over carbon catalysts with methane decomposition are studied using various characterization techniques.     

Novel Electrochemical Microsensor for Hydrogen Peroxide based on Iron‐Ruthenium Hexacyanoferrate Modified Carbon Fiber Electrode

Novel electrochemical microsensor based on mixed iron‐ruthenium hexacyanoferrate (FeRuHCF) modified carbon fiber microelectrode (CFME) is presented for voltammetric and amperometric measurement of hydrogen peroxide at physiological pH. The FeRuHCF coating was electrochemically deposited using a one step procedure onto the substrate carbon fiber microelectrode by cycling the potential between 0.0 and +1.0 V (vs. Ag/AgCl) in a solution containing all precursor salts. The microsensor displayed good stability in neutral and alkaline media and had a nonstop working lifetime of up to 12 hours. The amperometric response time varied from 5 to 15 s depending on the hydrogen peroxide concentration level. The newly developed electrochemical microsensor exhibited a highly linear behavior in the examined concentration range from 5 to 1000 μmol L^?1 (R²=0.999), an LoD (3σ) of 0.9 μmol L^?1, and a favorable reproducibility with a calculated RSD of 2.9% (n= 6) for 100 μmol L^?1 hydrogen peroxide, thus holding great promise for its further application in real samples and its exploitation in combination with biorecognition elements in advanced microbiosensor design.     

Effect of Sr Substitution on Catalytic Activity of La1-XSrxMnO3 (0≤x≤0.8) Perovskite-Type Oxides for Catalytic Decomposition of Hydrogen Peroxide

La_1−x Sr_xMnO₃ (0≤x≤0.8) perovskite-type oxides were synthesized by the combined EDTA-citrate complexing method and their catalytic activity for the decomposition of hydrogen peroxide was investigated. Hydrogen peroxide decomposition was observed as a first-order reaction on these catalysts. With the increase of Sr substitution, the catalytic activity increased accordingly. Through analysis of the kinetic results, the compensation effect was found for these perovskites and Mn⁴⁺ ions were ascribed as the active sites of hydrogen peroxide decomposition. This revised version was published online in June 2006 with corrections to the Cover Date.     

Production of Hydrogen from Methane by a CO2 Emission-Suppressed Process: Methane Decomposition and Gasification of Carbon Nanofibers

Catalytic methane decomposition into hydrogen and carbon nanofibers and the oxidations of carbon nanofibers with CO₂, H₂O and O₂ were overviewed. Supported Ni catalysts (Ni/SiO₂, Ni/TiO₂ and Ni/carbon nanofiber) were effective for the methane decomposition. The activity and life of the supported Ni catalysts for methane decomposition strongly depended on the particle size of Ni metal on the catalysts. The modification of the catalysts with Pd enhanced the catalytic activity and life for methane decomposition. In particular, the supported Ni catalysts modified with Pd showed high turnover number of hydrogen formation at temperatures higher than 973 K with a high one-pass methane conversion (>70%). However, sooner or later, every catalyst completely lost their catalytic activities due to the carbon layer formation on active metal surfaces. In order to utilize a large quantity of the carbon nanofibers formed during methane decomposition as a chemical feedstock or a powdered fuel for heat generation, they were oxidized with CO₂, H₂O and O₂ into CO, synthesis gas and CO₂, respectively. In every case, the conversion of carbon was greater than 95%. These oxidations of carbon nanofibers recovered or enhanced the initial activities of the supported Ni catalysts for methane decomposition.     

Carbon Deposits Formed on the Surface of Ru–Ni Catalysts During the Mixed Reforming of Methane Process

Monometallic nickel and bimetallic ruthenium–nickel catalysts supported onto aluminum oxide without additives and aluminum oxide modified with MgO and CaO were prepared by an impregnation method. The catalysts were tested in the process of the mixed reforming of methane, and their properties were characterized by thermogravimetry, scanning electron microscopy, and X-ray diffractometry. The total organic carbon content of the catalysts was also measured. The promoting effect of ruthenium and structural promoters on the catalytic activity of Ni/Al₂O₃ was confirmed. The Ru–Ni/MgO–Al₂O₃ catalyst exhibited the highest stability and activity; this fact can be explained by the increased adsorption of methane on the surface of ruthenium–nickel clusters.     

Supported ruthenium catalysts in hydrodechlorination of CCl2F2 (CFC-12)

Active carbon-and MgF₂-supported ruthenium catalysts characterized by a comparable metal dispersion were investigated in CCl₂F₂ hydrodechlorination. Ruthenium, especially when supported on carbon, exhibits a considerable selectivity to CHClF₂. This propensity and a noticeable activity towards C₂-products differentiate ruthenium from palladium catalysts. Dedicated to Professor Pál Tétényi on the occasion of his 70th birthday     

Ruthenium phosphine complexes as catalysts of alternating copolymerization of ethylene and carbon monoxide

The properties of the ruthenium (II) phosphine complexes [Ru(dppe)₂(OTs)₂] and [Ru{PhP(CH₂CH₂CH₂PPh₂)₂}(OTs)₂] as catalysts of alternating copolymerization of ethylene and carbon monoxide were studied. The catalytic activity of these complexes in the absence of cocatalysis is low, but it is substantially increased in the presence of trifluoroacetic acid or 1,4-benzoquinone. These compounds are the first ruthenium complexes which catalyze copolymerization of ethylene and CO. Translated fromAkademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1119–1121, June, 2000.     

Stability of hydrogen peroxide during perhydrolysis of carboxylic acids on acidic heterogeneous catalysts

This paper describes a study of the stability of hydrogen peroxide in the presence of different aluminosilicate materials, in connection with an investigation of carboxylic acid perhydrolysis. During the reaction, aluminosilicate materials such as H-β zeolites, mesoporous material H-MCM-41 and alumina initiate the decomposition of hydrogen peroxide. The reason of the spontaneous decomposition of H₂O₂ is related to the partial dealumination of these zeolites. However, in the case of experiments carried out with H-ZSM-5 zeolite catalysts, a slight catalytic effect on the perhydrolysis and no spontaneous decomposition of hydrogen peroxide were noticed. The use of cation exchange resins as catalysts is more kinetically beneficial than H-ZSM-5 zeolite catalysts.     

Olefin isomerization reactions catalyzed by ruthenium hydrides bearing Schiff base ligands

A series of in situ‐generated ruthenium hydride complexes Ru(PPh₃)₂(CO)H(Lⁿ) (n = a – h ) incorporating a Schiff base ligand was investigated for the isomerization of olefins. ¹H‐NMR was used to characterize the new hydride species in combination with ³¹P‐NMR. Allylbenzene and 1‐octene were used as model substrates. Temperature, solvents and catalyst/substrate mole ratio were taken into account as parameters to optimize the isomerization reaction. All catalysts showed the best performance in 2‐butanol, suggesting that the catalytic activity depends not only strongly on the steric and electronic environment of the ruthenium but also on the chosen solvent. Copyright © 2011 John Wiley & Sons, Ltd.     

Properties of anodic RuNiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>(OH)<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> catalysts synthesized on carbon supports with various dispersion degree

A number of catalysts of the (Ru-Ni)/C system is synthesized and studied for application in anodes of alkaline ethanol-air fuel cells. The carbon supports used are carbon blacks with different specific surface area and graphite powders. The X-ray photoelectron spectroscopy technique allowed detecting on the catalyst surface metallic ruthenium and nickel in the form of Ni(OH)2 hydroxide and possibly oxyhydroxide NiOOH. It is shown that the catalyst activity in the reaction of ethanol electrochemical oxidation grows at an increase in the specific surface area of the carbon support. The method of carbon monoxide oxidative desorption was used to determine the values of the specific surface area of the catalyst metallic phase. It is shown that at an increase in the relative ruthenium content from (1Ru3Ni)/C to Ru/C, the specific catalytic activity in the catalysts of the (Ru-Ni)/C system reaches the maximum value near the composition of (2Ru1Ni)/C. It is shown that the found optimum catalyst composition is independent of the carbon support dispersion degree. Activity in ethanol electrooxidation of the (2Ru1Ni)/C catalyst supported on the Ketjenblack EC-600 carbon black is 18 ± 3 A/g of the catalyst (>120 A/g of Ru) at 40°C and potential E = 0.5 V in the 2MKOH + 1 M C₂H₅OH electrolyte.     

A Million Turnover Molecular Anode for Catalytic Water Oxidation

Molecular ruthenium‐based water oxidation catalyst precursors of general formula [Ru(tda)(Lⁱ)₂] (tda^2? is [2,2′:6′,2′′‐terpyridine]‐6,6′′‐dicarboxylato; L¹=4‐(pyren‐1‐yl)‐N‐(pyridin‐4‐ylmethyl)butanamide, 1 b ; L²=4‐(pyren‐1‐yl)pyridine), 1 c ), have been prepared and thoroughly characterized. Both complexes contain a pyrene group allowing ready and efficiently anchoring via π interactions on multi‐walled carbon nanotubes (MWCNT). These hybrid solid state materials are exceptionally stable molecular water‐oxidation anodes capable of carrying out more than a million turnover numbers (TNs) at pH 7 with an E_app=1.45 V vs. NHE without any sign of degradation. XAS spectroscopy analysis before, during, and after catalysis together with electrochemical techniques allow their unprecedented oxidative ruggedness to be monitored and verified.     

Nanostructured catalysts for direct electrooxidation of dimethyl ether based on Bi- and trimetallic Pt–Ru and Pt–Ru–Pd alloys prepared from coordination compounds

Bi- and trimetallic platinum–ruthenium and platinum–ruthenium–palladium catalysts with specified atomic ratios Pt: Ru = 1: 1 and Pt: Ru: Pd = 1: 1: 0.1, respectively, were synthesized from the coordination compounds of the metals deposited on highly dispersed carbon black. The catalysts were characterized by powder X-ray diffraction, electron dispersive analysis, and transmission electron microscopy. According to voltammetry data, the highest activity in the dimethyl ether (DME) electrooxidation is exhibited by the catalyst Pt_0.43Ru_0.47Pd_0.1/C; hence, it may be considered as a promising anode material for direct DME fuel cells.     

Catalytic properties of nickel–yttrium mixed oxides and the influence of ionizing radiation

Some physico-chemical and catalytic properties of NiO–Y₂O₃ cataysts containing various amounts of components in the range 0–100 wt% of one component have been studied before and after 1 MGy gamma or accelerated electron irradiation in air or in water using the hydrogen peroxide decomposition as a test reaction. Both kinds of irradiation led only to a change in surface oxidative ability but did not lead to modification of the catalytic activity of the catalysts. The reduction of the catalysts led to a creation of new kind of catalytic sites.     

Synthesis,spectroscopic characterization,antineoplastic, in vitro-cytotoxic,and antibacterial activities of mononuclear ruthenium(II) complexes

The synthesis, antineoplastic, cytotoxic, and antibacterial activities of Ru(II) complexes derived from quinazoline and thiosemicarbazone ligands are reported. These complexes have been prepared and characterized by UV-Vis, IR, ¹H-NMR, FAB-mass spectroscopy, and elemental analysis. The ligands and resulting complexes were subjected to in vivo antineoplastic activity against a transplantable murine tumor cell line Ehrlich ascites carcinoma (EAC) and in vitro cytotoxic activity against human cancer cell line Molt 4/C₈, CEM, and murine tumor cell line L 1210. The ruthenium complexes show promising biological activity especially in decreasing tumor volume and viable ascitic cell counts. These complexes prolonged the life span of mice bearing EAC tumors by 10–52%. In vitro evaluation of these ruthenium complexes revealed cytotoxic activity from 0.29 to 2.9?µmol?L^?1 against Molt 4/C₈, 0.22 to 2.1?µmol?L^?1 against CEM and 0.42 to 4.7?µmol?L^?1 against L1210 cell proliferation, depending on the nature of the compound. The metal complexes are more active than the parent ligand and exhibit mild to moderate antibacterial activity.     

Copolymerization of carbon dioxide and cyclohexene oxide with zinc/β‐ketoiminato complexes: Investigating the influence of the electron structure of zinc/β‐ketoiminato complexes on the catalytic activity and resultant copolymer properties

A series of LZnX zinc/β‐ketoiminato complexes [L = CH₃C(OH)?C(CH₂CH?CH₂)C(CH₃)?NAr ( L₁ ), CH₃C(OH)?C(CH₂CH₂CN)C(CH₃)?NAr ( L₂ ), CH₃C(OH)?C(CH₂C₆H₅)C(CH₃)?NAr ( L₃ ), or CH₃C(OH)?CHC(CH₃)?NAr ( L₄ ); Ar = 2,6‐ⁱPr₂C₆H₃; and initiation group X = alcoholate or acetate (for L₁ ) or alcoholate (for L₂ – L₄ )] were synthesized, and their activities toward the copolymerization of carbon dioxide with cyclohexene oxide were determined. The 3‐position substituents on the β‐ketoiminato ligand backbone of the zinc/β‐ketoiminato complexes played an important role not only in the catalytic activity but also in the intrinsic viscosity, chemical composition, and refined microstructure of the resultant copolymers. The order of the catalytic activity of L₁ ZnX with different initiation groups (X = OMe, OⁱPr, or OAc) was L₁ Zn (OⁱPr) > L₁ Zn (OMe) > L₁ Zn (OAc), being the opposite of the order of the leaving ability of the initiation groups. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6243–6251, 2006     

Synthesis,characterization, antitumor,and cytotoxic activity of mononuclear Ru(II) complexes

In the search for antitumor active metal complexes several ruthenium complexes have been reported to be promising. A series of mononuclear Ru(II) complexes, [Ru(T)₂(S)]²⁺, where T?=?2,2′-bipyridine/1,10-phenanthroline and S?=?CH₃-bitsz, Cl-bitsz, Br-bitsz, tmtsz, dmtsz, have been prepared and characterized by UV-Vis, IR, ¹H-NMR, FAB-mass spectroscopy, and elemental analysis. The complexes were subjected to in vivo anticancer activity against a transplantable murine tumor cell line Ehrlich's ascitic carcinoma (EAC) and in vitro cytotoxic activity against human cancer cell line Molt 4/C₈, CEM, and murine tumor cell line L1210. Ruthenium complexes showed promising biological activity especially in decreasing tumor volume and viable ascitic cell counts. Treatment with these complexes prolonged the life span of EAC-tumor-bearing mice by 10–48%. In vitro evaluation of these ruthenium complexes revealed cytotoxic activity from 0.21 to 24?µmol?L^?1 against Molt 4/C₈, 0.16–19?µmol?L^?1 against CEM, and 0.75–32?µmol?L^?1 against L1210 cell proliferation, depending on the nature of the compound.     

Ruthenium catalysts of liquid-phase hydrocracking ofn-alkanes

Catalysts of liquid-phase hydrocracking ofn-alkanes with higher activity than Ru-black were obtained by decomposition of Ru₃(CO)₁₂ and Ru₃(CO)₁₂ +i-Bu₂AlH in alkanes at 180–200°C and 5 MPa H₂ and (benzene)(1,3-cyclohexadiene)ruthenium at 20°C and 0.1 MPa H₂. The system based on Ru₃(CO)₁₂ +i-Bu₂AlH is x-ray amorphous, and the remainder have a 30–60 Å particle size.A. N. Nesmeyanov Institute of Organoelemental Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1211–1213, May, 1992.     

Composite of Pt–Ru supported SnO2 nanowires grown on carbon paper for electrocatalytic oxidation of methanol

Platinum–ruthenium (Pt–Ru) nanoparticles were successfully deposited, for the first time, on the surface of SnO₂ nanowires grown directly on carbon paper (Pt–Ru/SnO₂ NWs/carbon paper) by potentiostatic electrodeposition method. The resultant Pt–Ru/SnO₂ NWs/carbon paper composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The electrocatalytic activities of these composite electrodes for methanol oxidation were investigated and higher mass and specific activities in methanol oxidation were exhibited as compared to Pt–Ru catalysts deposited on glassy carbon electrode.