黏性介质中圆截面弹性细杆的平面振动

讨论圆截面弹性细杆在黏性介质中的平面振动. 基于Kirchhoff理论，以杆中心线的Frenet坐标系为参考系，建立其动力学方程，杆中心线为任意平面曲线时，其扭转振动与弯曲振动解耦. 讨论两端固定条件下任意形状杆的平面扭转振动，以及无扭转的轴向受压直杆和圆环杆的平面弯曲振动，导出其自由振动频率和阻尼系数. 证明空间域内压杆的Lyapunov稳定性和欧拉稳定性条件为时域内渐近稳定性的充分必要条件，或无阻尼压杆的稳定性必要条件. 圆环杆平衡恒满足渐近稳定性条件. 关键词： 弹性细杆 黏性介质 扭转振动 弯曲振动     

弹性压扭直杆的Greenhill公式对精确模型的推广

将圆截面Kirchhoff弹性压扭直杆的Greenhill公式推广到精确模型.基于平面截面假定,在弯扭的基础上增加了拉压和剪切变形,将弹性杆的位形表达为截面的弧坐标历程.由弹性杆精确模型的平衡微分方程,得到了两端受力螺旋作用时对应于直线平衡状态的特解,导出了线性化扰动方程及其通解,再根据两端为铰支时的边界条件以及积分常数存在非零解的条件导出弹性直杆精确模型的Greenhill公式.结果表明,由力螺旋表示的稳定域为一对称的封闭区域,拉压和剪切对稳定性的影响取决于拉压柔度与剪切柔度之差、抗弯刚度和杆长这三个因素.     

Thermal distribution calculation in diode pumped Nd:YAG laser rod by boundary element method

Boundary element method is used to calculate the temperature distribution by solving the heat transfer equation in a laser rod. Propagation of the pumping beam in the rod, that is assumed to be pumped longitudinally, results in a temperature gradient. Such a gradient produces radial variation of the refractive index and the rod behaves similar to a positive lens. Depending on the size of the pumping beam waist and absorption coefficient of the rod, a hot spot may form inside the rod.     

受拉扭弹性细杆超螺旋形态的定性分析

基于弹性杆的Kirchhoff模型讨论受拉扭弹性细杆的超螺旋形态.导出细长螺旋杆的等效抗弯和抗扭刚度.分析受拉扭弹性细杆的稳定性和分岔,且利用等效刚度概念将弹性杆的稳定性条件应用于对细长螺旋杆稳定性的判断.在扭矩不变条件下增加拉力至极限值时,直杆平衡状态失稳转为螺旋杆状态.继续增加拉力,直螺旋杆平衡状态失稳卷绕为超螺旋杆.从而对Thompson/Champney实验中受拉扭弹性细杆形成超螺旋形态的多次卷绕现象作出定性的理论解释. 关键词： 弹性细杆 Kirchhoff动力学比拟 等效刚度 超螺旋形态     

Stability and vibration of a helical rod with circular cross section in a viscous medium

The stability and vibration of a thin elastic helical rod with circular cross section in a viscous medium are discussed. The dynamical equations of the rod in the viscous medium are established in the Frenet coordinates of the centreline with the Euler angles describing the attitudes of the cross section as variables. We have proved that the Lyapunov and Euler conditions of stability of a helical rod in the space domain are the necessary conditions for the asymptotic stability of the rod in the time domain. The free frequencies and damping coefficients of torsional and flexural vibrations of the helical rod in the viscous medium are calculated.     

A monopole-dipole resonator for flexural waves in a rod

For flexural waves in a rod, a simplest resonator responding not only displacements but also to the inclination (the derivative of the displacement) of the rod axis is studied. The resonator consists of two springmass systems attached through a rigid (nonbending) bar to the elastic rod in which a flexural wave propagates. One of the springs is oriented perpendicularly to the rod, and the other is parallel to it. It is shown that, at a certain friction, the single monopole-dipole resonator under consideration completely absorbs the incident resonance-frequency flexural wave, which propagates in the elastic rod.     

Forced torsional vibrations of a cylindrical rod connected to an elastic half-space

An analysis is presented of the forced torsional vibrations of a cylindrical rod connected to an elastic half-space under the condition that the circumferential displacement at the free end of the rod, where the disturbing moment is applied, varies proportionally with the distance from the rod axis. Both the Pochhammer-Chree and elementary theory are utilized. The response curve of the rotational amplitude at the free end of the rod, obtained from the Pochhammer-Chree theory, and that obtained from the elementary theory almost coincide with each other except in the case where the rod and the half-space are of the same material. The amplitude attenuation is largest when the rod and the half-space are of the same material. The maximum values of half-space displacement distribution at the interface lie within the rod edge.     

基于高斯原理的Cosserat弹性杆动力学模型

在动力学普遍原理中, 高斯最小拘束原理的特点是可通过寻求函数极值的变分方法直接得出运动规律, 而无须建立动力学微分方程. Kirchhoff动力学比拟方法以刚性截面的姿态表述弹性细杆的几何形态, 并发展为以弧坐标s和时间t为自变量的弹性杆分析力学. 由于截面姿态的局部微小改变沿弧坐标的积累不受限制, Kirchhoff模型适合描述弹性杆的超大变形. Cosserat弹性杆模型考虑了Kirchhoff模型忽略的截面剪切变形、中心线伸缩变形和分布力等因素, 是更符合实际弹性杆的动力学模型. 建立了基于高斯原理的Cosserat弹性杆的分析力学模型, 导出拘束函数的普遍形式, 以平面运动为例进行讨论. 关于弹性杆空间不可自相侵占的特殊问题, 给出相应的约束条件对可能运动施加限制, 以避免自相侵占情况发生.     

激光二极管端面泵浦Yb:YAG圆棒热效应研究

基于激光二极管端面泵浦Yb∶YAG棒工作特点的分析,提出了端面绝热、周边恒温的激光晶体热分析模型,采用了一种新的热传导方程求解方法,得到了超高斯光束端面泵浦Yb∶YAG棒温度场的一般解析表达式。同时分析了不同阶次、不同光斑半径、不同功率超高斯光束以及晶体参数改变时对于Yb∶YAG棒温度场分布的影响。研究结果表明,若准直聚焦到Yb∶YAG棒泵浦面42.5W的光束具有4阶超高斯强度分布时,掺Yb3+质量分数为10.0at.%、长度为2.5mm、半径为2mm的Yb∶YAG棒的泵浦面获得74.20℃的最高温升。新的热传导方程求解方法在研究激光棒温度场分布方面具有计算量小、精度高等特点。研究结果对减小激光晶体的热效应,提高全固态Yb∶YAG激光器性能提供了理论依据。     

弱熔体对流对定向凝固中棒状共晶生长的影响

利用渐近方法求出在弱对流熔体中定向凝固棒状共晶生长的浓度场的渐近解,研究了弱熔体对流对定向凝固中棒状共晶生长的影响.结果表明,弱熔体对流对定向凝固中棒状共晶生长有显著的作用;平均界面过冷度不仅与棒状共晶的棒间距、生长速度有关,还与流动强度有关;当生长速度一定时,随着流动强度增大,棒状共晶的平均界面过冷度减小.利用最小过冷原则,获得棒间距与生长速度和流动强度的关系.结果表明,当生长速度比较小时,随着流动强度增大,棒状共晶的棒间距增大;当生长速度比较大时,随着流动强度增大,棒状共晶的棒间距变化减弱;棒状共晶的生长速度越小,流动对棒状共晶生长的影响越大.利用本文的解析结果计算在对流条件下Al-Cu共晶的棒间距,结果显示随着转速增大或径向距离增大,共晶的间距增大,这与Junze等的实验结果相符合.     

Kirchhoff弹性直杆在力螺旋作用下的稳定性

研究受力螺旋作用的圆截面Kirchhoff弹性直杆在各种边界条件下的稳定性问题. 用直角坐标和Cardano角表示截面的形心位置和姿态. 由Kirchhoff方程得到弹性细杆的直线平衡特解,导出线性化扰动方程及其通解. 根据边界条件确定积分常数的非零解存在条件,讨论了各种边界条件,如两端铰支、两端固定、一端铰支一端固定以及一端固定一端自由的弹性细杆直线平衡状态的稳定性,导出了临界载荷的表达式,绘制了稳定域,将Greenhill公式推广到其他边界条件,并且使压杆的Euler 公式成为其特例. 关键词： Kirchhoff弹性杆 稳定性 力螺旋 Greenhill公式     

Investigation of the beam propagation in a pumped laser rod

A method investigating the beam propagation in a pumped laser rod is proposed. In this method, the pumped laser rod in a resonator is evenly divided into N segments along the laser rod axis, and each segment is considered as a small thermal lens with thermal focus length of f. Accordingly, the beam radius distributions in the laser rod for the symmetric and asymmetric resonators are thus calculated, respectively. The beam radius distribution in the whole resonator is also calculated. Moreover, the calculated beam distribution in the whole resonator and in the rod is also described in detail.     

Comparison of results for the effective height and atmospheric electric field distribution surrounding a parallelepiped building with Franklin's rod and lightning protection rod JUS N. B4. 811

Atmospheric electric field distribution in the surroundings of building with lightning protection rod with and without horizontal circular loop is determined in this paper. Lightning protection rod having a circular loop is Serbian national standard (JUS N. B4. 811). The effective height of the building with lightning protection rod, as an important parameter for defining protection area, is also determined. Using the results it is noticed that lightning protection rod having a horizontal circular loop (JUS N. B4. 811) is better than Franklin's lightning protection rod, with equal height, for protecting buildings.     

On dynamics of elastic rod based on exact Cosserat model

The analysis of kinematics and dynamics of an elastic rod with circular cross section is studied on the basis of exact Cosserat model under consideration of the tension and shear deformation of the rod. The dynamical equations of a rod with arbitrary initial shape are established in general form. The dynamics of a straight rod under axial tension and torsion is discussed as an example. In discussion of static stability in the space domain the Greenhill criteria of stability and the Euler load are corrected by the influence of tension and shear strain. In analysis of dynamical stability in the time domain it is shown that the Lyapunov and Euler stability conditions of the rod in space domain are the necessary conditions of Lyapunov's stability in the time domain. The longitudinal, torsional and lateral vibrations of a straight rod based on exact model are discussed, and an exact formula of free frequency of lateral vibration is obtained. The free frequency formulas of various simplified models, such as the Rayleigh beam, the Kirchhoff rod, and the Timoshenko beam, can be seen as special cases of the exact formula under different conditions of simplification.     

初始条件对粉末连杆锻造致密过程影响的模拟研究

为研究在不同初始条件(初始相对密度、摩擦因子)下对粉末连杆锻造致密过程的影响,运用塑性变形有限元软件DEFORM-3D对粉末连杆锻造过程进行了计算机模拟研究;研究结果表明,不同初始条件对粉末连杆锻造成形致密过程具有重要影响:(1)连杆锻造过程受到的等效应力集中在杆身部位,连杆两头的等效应力相对较小,说明其锻造过程各处所受等效应力不均匀,成形密度也不均匀;(2)初始相对密度较小的预锻坯锻造结束时,连杆大头处的材料不能达到致密,初始相对密度大的预成形坯,终锻致密效果好;(3)摩擦因数越大,连杆表面的材料流动阻力就越大,连杆大小两头就越难达到致密,说明摩擦因子对连杆相对密度分布均匀性有较大影响;通过对粉末连杆锻造致密过程影响的研究,为粉末连杆预锻坯和模具的优化设计及粉末锻造连杆的成形规律提供一定理论依据。     

精确Cosserat弹性杆动力学的分析力学方法

以脱氧核糖核酸和工程中的细长结构为背景, 大变形大范围运动的弹性杆动力学受到关注. 将分析力学方法运用到精确Cosserat弹性杆动力学, 旨在为前者拓展新的应用领域, 为后者提供新的研究方法. 基于平面截面假定, 在弯扭基础上再计及拉压和剪切变形形成精确Cosserat弹性杆模型. 用刚体运动的概念描述弹性杆的变形, 导出弹性杆变形和运动的几何关系; 在定义截面虚位移及其变分法则的基础上, 建立用矢量表达的d’Alembert-Lagrange原理, 在线性本构关系下化作分析力学形式, 并导出Lagrange方程和Nielsen方程, 定义正则变量后化作Hamilton正则方程; 对于只在端部受力的弹性杆静力学, 导出了将守恒量预先嵌入的Lagrange方程, 并讨论了其首次积分. 从弹性杆的d’Alembert-Lagrange原理导出积分变分原理, 在线性本构关系下化作Hamilton原理. 形成的分析力学方法使弹性杆的全部动力学方程具有统一的形式, 为弹性杆动力学的对称性和守恒量的研究及其数值计算铺平道路. 关键词： 精确Cosserat弹性杆 分析动力学方法 变分原理 Lagrange方程     

圆截面弹性螺旋杆的稳定性与振动

基于Kirchhoff理论讨论圆截面弹性螺旋杆的动力学问题.以杆中心线的Frenet坐标系为参考系，建立用欧拉角描述的弹性杆动力学方程.讨论其在端部轴向力和扭矩作用下保持的无扭转螺旋线平衡状态.在静力学和动力学领域内讨论其平衡稳定性问题.还讨论了弹性杆平衡的Lyapunov稳定性和欧拉稳定性两种不同稳定性概念之间的区别和联系.在一次近似意义下证明了螺旋杆在空间域内的欧拉稳定性条件是时域内Lyapunov稳定性的必要条件.导出了解析形式螺旋杆三维弯曲振动的固有频率，为螺旋线倾角和受扰挠性线波数的函数. 关键词： 弹性螺旋杆 Kirchhoff动力学比拟 Lyapunov稳定性 欧拉稳定性     

The optical phonon effect of quantum rod qubits

The Hamiltonian of a quantum rod with an ellipsoidal boundary is given by using a coordinate transformation in which the ellipsoidal boundary is changed into a spherical one.Under the condition of strong electron-longitudinal optical phonon coupling in the rod,we obtain both the electron eigenfunctions and the eigenenergies of the ground and first-excited state by using the Pekar-type variational method.This quantum rod system may be used as a two-level qubit.When the electron is in the superposition state of the ground and first-excited states,the probability density of the electron oscillates in the rod with a certain period.It is found that the oscillation period is an increasing function of the ellipsoid aspect ratio and the transverse and longitudinal effective confinement lengths of the quantum rod,whereas it is a decreasing function of the electron-phonon coupling strength.     

变截面折流杆换热器的流动与传热分析

本文在折流杆换热器的基础上,采用数值计算的方法,以水为流动介质,对不同折流杆间隔的折流杆式换热器进行流动与传热特性的分析。同时,本文设计了一种新型的变截面折流杆式换热器,对换热器进行优化,结果表明,变截面折流杆换热器比等截面折流杆换热器的综合性能最多高13%～14%。     

Rod-climbing effect in Newtonian fluids

When a rotating rod is brought into a polymer melt or concentrated polymer solution, the meniscus climbs the rod. This spectacular rod climbing is due to the normal stresses present in the polymer fluid and is thus a purely non-Newtonian effect. A similar rod climbing of an interface between two fluids has therefore been taken as a signature that one of the fluids exhibits normal stress effects. We show here, however, that the effect can occur with simple Newtonian fluids: it occurs when a Taylor-Couette instability happens in the less viscous of the two liquids but not in the more viscous one.