Systematic synthesis, isolation, and photophysical properties of linear-shaped Re(I) oligomers and polymers with 2-20 units

Systematic synthesis routes have been developed for the linear-shaped rhenium(I) oligomers and polymers bridged with bidentate phosphorus ligands, [Re(N--N)(CO)3-PP-{Re(N--N)(CO)2-PP-}(n)Re(N--N)(CO)3](PF6)(n+2) (N--N = diimine, PP = bidentate phosphine, n = 0-18). These were isolated by size exclusion chromatography (SEC) and identified by (1)H NMR, IR, electrospray ionization Fourier transform mass spectrometry, analytical SEC, and elemental analysis. Crystal structures of [Re(bpy)(CO)3-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)3](PF6)2, [Re(bpy)(CO)3-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)2-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)3](PF6)3 and [Re(bpy)(CO)3-Ph2PC2H4PPh2-{Re(bpy)(CO)2Ph2PC2H4PPh2-}(n)Re(bpy)(CO)3](PF6)(n+2) (bpy = 2,2'-bipyridine, n = 1, 2) were obtained, showing that they have interligand pi-pi interaction between the bpy ligand and the phenyl groups on the phosphorus ligand. All of the oligomers and polymers synthesized were emissive at room temperature in solution. For the dimers, broad emission was observed with a maximum at 523-545 nm, from the (3)MLCT excited-state of the tricarbonyl complex unit, [Re(N--N)(CO)3-PP-]. Emission from the longer oligomers and polymers with > or = 3 Re(I) units was observed at wavelengths 50-60 nm longer than those of the corresponding dimers. This fact and the emission decay results clearly show that energy transfer from the edge unit to the interior unit occurs with a rate constant of (0.9 x 10(8))-(2.5 x 10(8)) s(-1). The efficient energy transfer and the smaller exclusive volume of the longer Re(I) polymers indicated intermolecular aggregation for these polymers in an MeCN solution.     

Synthesis of N-heterocyclic carbene rhenium(I) carbonyl complexes

Reaction of aminophosphinimine [RHN(CH(2))(2)N[double bond, length as m-dash]PPh(3)] (R = H, Et) with Re(2)(CO)(10) provided the NH-functionalized carbene rhenium complex [Re(2)(CNHCH(2)CH(2)NR)(CO)(9)] (3a, R = H, 3b, R = Et). Treatment of 3 with Br(2) provided the mono nuclear [Re(CNHCH(2)CH(2)NR)(CO)(4)Br] (1, R = H, 2, R = Et). However, NH-functionalized carbene complexes 1-3 did not undergo N-alkylation with alkyl halides to yield the N-substituted NHC complexes. The direct ligand substitution of [Re(CO)(5)Br] with a carbene donor was employed to prepare [Re(IMes(2))(CO)(4)Br] (6a, IMes(2) = 1,3-di-mesitylimidazol-2-ylidene; 6b, IMes(2) = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene). Analyses of spectroscopic and crystal data of 6a and 6b show similar corresponding data among these complexes, suggesting the saturated and unsaturated NHCs have similar bonding with Re(I) metal centers. Reduction of 6a and 6b with LiEt(3)BH yielded the corresponding hydrido complexes 7a-b [ReH(CO)(4)(IMes(2))], but not 1 and 2. Ligand substitution of 1, 6a and 6b toward 2,2'-bipyridine (bipy) was investigated. Crystal structures of 1, 3a-b, 6a-b and 7b were determined for characterization and comparison.     

Coordination of cyclo-octasulfur and cyclo-heptaselenium to dinuclear rhenium(I) systems

By substitution reactions of the coordinated THF ligands of Re(2)(mu-X)(2)(CO)(6)(THF)(2) by elemental chalcogens (S(8) and red selenium), the complexes Re(2)(mu-X)(2)(CO)(6)(S(8)) (X = Br, 1; I, 2), and Re(2)(mu-X)(2)(CO)(6)(Se(7)), (X = I, 3; Br, 4) have been prepared. Binuclear compound 3 was crystallographically established to be a coordination compound of cyclo-heptaselenium, two adjacent selenium atoms of the Se(7) ligand [Se-Se distance, 2.558(3) A] being bonded to rhenium(I), at an average Re-Se distance of 2.586(3) A, and the nonbonding Re.Re distance being 4.077(3) A. Spectroscopic evidence of the existence of these chalcogen complexes in solution is reported. The Re(2)(mu-X)(2)(CO)(6)(S(8)) complexes undergo S(8) displacement by THF, while the coordinated Se(7) moiety is less readily displaced from 3.     

Design and synthesis of site directed maleimide bifunctional chelators for technetium and rhenium

A new family of heterobifunctional linkers (L1-L9) containing a terminus consisting of a tridentate donor set for coordination of the {M(CO)(3)}(+) core (M = Tc, Re), and a thiol reactive maleimide group has been prepared conveniently and in high yield under Mitsunobu reaction conditions by the coupling of an appropriate alcohol derivative with maleimide. The rhenium complexes [Re(CO)(3)(Lx)]Br (x= 1-9) were prepared in good yields from the reactions of the ligands and (NEt(4))(2)[Re(CO)(3)Br(3)] in refluxing methanol. The ligands and their Re complexes were characterized by (1)H and (13)C NMR, IR, and ESI-MS. Ligand L4 and [Re(CO)(3)(L5)]Br have been structurally characterized by X-ray crystallography. Photoexcitation of solutions of the complexes [Re(CO)(3)(Lx)]Br (x= 4-6) gives rise to intense and prolonged luminescence at room temperature (fluorescence lifetimes of ca. 16 micros). The ligands and their Re complexes react smoothly at the maleimide linker with sulfhydryl groups of peptides and proteins at room temperature in phosphate-buffered saline (PBS, pH 7.4) to form stable thioether bioconjugates. The photoluminescence properties of the labeled conjugates are similar to those of the parent complexes, but with even longer lifetimes. The ligands can also be labeled at room temperature with (99m)Tc to give chemically robust complexes. The corresponding hydrazinonicotinamide derivative N-[5-(6'-hydrazinopyridine-3'-carbonyl)aminopentyl]maleimide (L10) was also prepared. While coupling of L10 to cysteine ethylester and synthesis of the rhenium derivative [ReCl(3)(HYNIC-maleimide)(2)] were successfully accomplished, attempts to couple [ReCl(3)(HYNIC-maleimide)(2)] to glutathione or BSA yielded intractable mixtures.     

Synthesis, characterization, and structural studies of multimetallic ferrocenyl carbene complexes of group VII transition metals

Fischer carbene complexes of the group VII transition metals (Mn and Re) containing at least two or three different transition metal substituents, all in electronic contact with the carbene carbon atom, were synthesized. The structural features and their relevance to bonding in the carbene multimetal compounds were investigated, as they represent indicators of possible reactivity sites in polymetallic carbene assemblies. For complexes of the type [ML(x){C(OR)R'}] (ML(x) = MnCp(CO)(2) or Re(2)(CO)(9)), ferrocenyl (Fc) was chosen as the R' substituent, while the OR substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1a (ML(x) = MnCp(CO)(2), R = Et, R' = Fc), 2a (ML(x) = MnCp(CO)(2), R = TiCp(2)Cl, R' = Fc), 3a (ML(x) = Re(2)(CO)(9), R = Et, R' = Fc), and 4a (ML(x) = Re(2)(CO)(9), R = TiCp(2)Cl, R' = Fc). Direct lithiation of the ferrocene with n-BuLi/TMEDA at elevated temperatures, followed by the Fischer method of carbene preparation, resulted in formation of the novel biscarbene complexes with bridging ferrocen-1,1'-diyl (Fc') substituents [{π-Fe(C(5)H(4))(2)-C,C'}{C(OEt)ML(x)}(2)] (1b, ML(x) = MnCp(CO)(2); 3b, ML(x) = Re(2)(CO)(9)) or the unusual bimetallacyclic bridged biscarbene complexes [{π-TiCp(2)O(2)-O,O'}{π-Fe(C(5)H(4))(2)-C,C'}{CML(x)}(2)] (2b, ML(x) = MnCp(CO)(2); 4b, ML(x) = Re(2)(CO)(9)). The target compounds that were isolated displayed a variety of different geometric isomers and conformations. The greater reactivity of the binary dirhenium acylates in solution, compared to that of the cyclopentadienyl manganese acylate, resulted in a complex reaction mixture. Although the stabilization of hydroxycarbene or hydrido-acyl intermediates of dirhenium carbonyls could not be achieved, their existence in solution was confirmed by the isolation of [(π-H)(2)-(Re(CO)(4){C(O)Fc})(2)] (8), the unique dichloro-bridged biscarbene complex fac-[(π-Cl)(2)-(Re(CO)(3){C(OEt)Fc})(2)] (6), the known hydrido complex [Re(3)(CO)(14)H] (5), the acyl complex [Re(CO)(5){C(O)Fc}] (7), and the aldehyde-functionalized eq-[Re(2)(CO)(9){C(OTiCp(2)Cl)(Fc'CHO)}] (9).     

Reactivity of 17 e- complex [Re(II)Br4(CO)2]2- with bridging aromatic ligands. Characterization and CO-releasing properties

Carbon monoxide releasing molecules (CO-RMs) are a newly emerging class of compounds of pharmacological interest. Among the transition metal-based CO-RMs, 17-electron complexes of general formula cis-trans-[Re(II)(CO)(2)Br(2)L(2)] are promising candidates but their poor hydrophilicity hampers future applications. In an effort to increase water solubility of d(5) dicarbonyl rhenium CO-RMs, the reaction of the cis-[Re(II)(CO)(2)Br(4)](2-) anion with bridging aromatic ligands of the pyridine and diazine type was investigated. Mononuclear and binuclear complexes are presented and it is shown that the nature of the bridging ligand critically dictates the formation of either species. Most complexes retained their fundamental CO-releasing properties. The synthesis of the molecules together with structural, spectroscopic and theoretical details are discussed.     

Comparative studies of substitution reactions of rhenium(I) dicarbonyl-nitrosyl and tricarbonyl complexes in aqueous media

The ligand substitution behavior of [ReBr3(CO)3](NEt4)2 (1) and [ReBr3(CO)2(NO)]NEt4 (2) in aqueous media was compared. Ligand exchange reactions were performed with multidentate chelating systems such as picolylaminediacetic acid (L1; N,N',O,O'), nitrilotriacetic acid (L2; N,O,O',O'), iminodiacetic acid (L3; N,O,O'), and bis(2-pyridyl)methane (L4; N,N'). The products of the substitution reactions were isolated and characterized by means of IR, NMR, MS, and X-ray structure analysis. NMR and crystallographic analyses confirmed the formation of single structural isomers in all cases with a ligand-to-metal ratio of 1:1. With ligands L1 and L2 and precursor 1 the tridentately coordinated complexes [Re(L1)(CO)3] (7) and [Re(L2)(CO)3]2- (8) were formed. With precursor 2 the same ligands unexpectedly coordinated tetradentately after displacing a CO ligand, yielding complexes [Re(L1)(CO)(NO)] (3) and [Re(L2)(CO)(NO)]- (4). In both complexes NO was found to be coordinated trans to the carboxylate group. Time-dependent IR spectra of the reaction of 2 with ligand L1 and L2 confirmed the loss of one CO during the reaction. The product of the reaction of 2 with L3 was identified as the neutral complex [Re(L3)(CO)2(NO)] (5), again, with the nitrosyl coordinated trans to the carboxylate. With 1, ligand L3 formed the anionic complex [Re(L3)(CO)3]- (9). Finally the reactions with L4 yielded the complexes [ReBr(L4)(CO)2(NO)]Br (6) and [ReBr(L4)(CO)3] (10), in which bromide was found to be coordinated trans to the NO and CO, respectively. The X-ray structures of 3, 5-7, and 10 are discussed: 3, monoclinic P2(1)/n, with a = 14.6071(6) A, b = 8.0573(3) A, c = 24.7210(11) A, beta = 107.117(5) degrees, and Z = 4; 5, triclinic P1, with a = 6.9091(5) A, b = 9.8828(7) A, c = 14.2834(10) A, alpha = 89.246(9) degrees, beta = 89.420(9) degrees, gamma = 86.196(9) degrees, and Z = 4; 6, triclinic P1, with a = 9.8236(8) A, b = 10.0949(8) A, c = 12.5346(10) A, alpha = 108.679(9) degrees, beta = 111.992(9) degrees, gamma = 95.426(10) degrees, and Z = 2; 10, monoclinic P2(1)/c, with a = 12.7491(12) A, b = 13.3015(13) A, c = 9.0112(9) A, beta = 107.195(2) degrees, and Z = 7.     

pH-Dependent spectroscopic and luminescent properties, and metal-ion recognition studies of Re(I) complexes containing 2-(2'-pyridyl)benzimidazole and 2-(2'-pyridyl)benzimidazolate

A series of Re(I) complexes, [Re(CO)(3)Cl(HPB)] (1), [Re(CO)(3)(PB)H(2)O] (2), [Re(CO)(3)(NO(3))(PB-AuPPh(3))] (3), and [Re(CO)(3)(NO(3))(PB)Au(dppm-H)Au](2) (4) [HPB = 2-(2'-pyridyl)benzimidazole; dppm = 2,2'-bis(diphenylphosphinomethane)], have been synthesized and characterized by X-ray diffraction. Complex 1, which exhibits interesting pH-dependent spectroscopic and luminescent properties, was prepared by reacting Re(CO)(5)Cl with an equimolar amount of 2-(2'-pyridyl)benzimidazole. The imidazole unit in complex 1 can be deprotonated to form the imidazolate unit to give complex 2. Addition of 1 equiv of AuPPh(3)(NO(3)) to complex 2 led to the formation of a heteronuclear complex 3. Addition of a half an equivalent of dppm(Au(NO(3)))(2) to complex 2 yielded 4. In both 3 and 4, the imidazolate unit acts as a multinuclear bridging ligand. Complex 4 is a rare and remarkable example of a Re(2)Au(4) aggregate in combination with μ(3)-bridging 2-(2'-pyridyl)benzimidazolate. Finally, complex 2 has been used to examine the Hg(2+)-recognition event among group 12 metal ions. Its reversibility and selectivity toward Hg(2+) are also examined.     

Head-to-head (HH) and head-to-tail (HT) conformers of cis-bis guanine ligands bound to the [Re(CO)3]+ core

We have prepared four complexes of the type [Re(guanine)(2)(X)(CO)(3)] (guanine = 9-methylguanine or 7-methylguanine, X = H(2)O or Br) in order to understand the factors determining the orientation of coordinated purine ligands around the [Re(CO)(3)](+) core. The 9-methylguanine ligand (9-MeG) was chosen as the simplest N(9) derivatized guanine, and 7-methylguanine (7-MeG) was chosen because metal binding to N(9) does not impose steric hindrance. Two types of structures have been elucidated by X-ray crystallography, an HH (head-to-head) and HT (head-to-tail) conformer for each of the guanines. All complexes crystallize in monoclinic space groups: [Re(9-MeG)(2)(H(2)O)(CO)(3)]ClO(4) (2) in P2(1)/n with a = 12.3307(10) A, b = 16.2620(14) A, c = 13.7171(11) A, and beta = 105.525(9) degrees, V = 2650.2(4) A(3), with the two bases in HT orientation and its conformer [Re(9-MeG)(2)(H(2)O)(CO)(3)]Br (3) in P2(1)/n with a = 15.626(13) A, b = 9.5269(5) A, c = 15.4078(13) A, and beta = 76.951(1) degrees, V = 2234.5(3) A(3), and the two bases in an HH orientation. Similarly, [Re(7-MeG)(2)(H(2)O)(CO)(3)]ClO(4) (4) crystallizes in P2(1)/c with a = 13.0708(9) A, b = 15.4082(7) A, c = 14.316(9) A, and beta = 117.236(7) degrees, V = 2563.5(3) A(3), and exhibits an HT orientation and [ReBr(7-MeG)(2)(CO)(3)] (5) in P2/c with a = 17.5117(9) A, b = 9.8842(7) A, c = 15.3539(1) A, and beta = 100.824(7) degrees, V = 2610.3(3) A(3), and shows an HH orientation. When crystals of any of these complex pairs are dissolved in D(2)O, the (1)H NMR spectrum shows a single peak for the H(8) resonance of the respective coordinated purine indicating a rapid equilibrium between HH and HT conformations in solution. DFT calculations simulating the rotation of one ligand around its Re-N bond showed energetic barriers of less than 8.7 kcal/mol. We find no hypochromic effect in the Raman spectrum of 3, which showed base stacking in the solid state. Neither steric interactions nor hydrogen bonding are important in determining the orientation of the ligands in the coordination sphere.     

Direct tyrosine oxidation using the MLCT excited states of rhenium polypyridyl complexes

Rhenium(I) polypyridyl complexes have been designed for the intramolecular photogeneration of tyrosyl radical. Tyrosine (Y) and phenylalanine (F) have each been separately appended to a conventional Re(I)(bpy)(CO)(3)CN framework via an amide linkage to the bipyridine (bpy) ligand. Comparative time-resolved emission quenching and transient absorption spectra of Re(bpy-Y)(CO)(3)CN and Re(bpy-F)(CO)(3)CN show that Y is oxidized only upon its deprotonation at pH 12. In an effort to redirect electron transport so that it is more compatible with intramolecular Y oxidation, polypyridyl Re(I) complexes have been prepared with the amide bond functionality located on a pendant phosphine ligand. A [Re(phen)(PP-Bn)(CO)(2)](PF(6)) (PP = bis(diphenylphosphino)ethylene) complex has been synthesized and crystallographically characterized. Electrochemistry and phosphorescence measurements of this complex indicate a modest excited-state potential for tyrosine oxidation, similar to that for the (bpy)Re(I)(CO)(3)CN framework. The excited-state oxidation potential can be increased by introducing a monodentate phosphine to the Re(I)(NN)(CO)(3)(+) framework (NN = polypyridyl). In this case, Y is oxidized at all pHs when appended to the triphenylphosphine (P) of [Re(phen)(P-Y)(CO(3))](PF(6)). Analysis of the pH dependence of the rate constant for tyrosyl radical generation is consistent with a proton-coupled electron transfer (PCET) quenching mechanism.     

Mononuclear and binuclear rhenium carbonyl nitrosyls: comparison with their manganese analogues

The structures and energetics of Re(NO)(CO)n (n = 5, 4, 3, 2) and Re2(NO)2(CO)n (n = 7, 6) have been investigated using density functional theory. For Re(NO)(CO)4 the preferred structure is an equatorially substituted trigonal bipyramid analogous to the known structure of the manganese analogue. The lowest energy structures for the unsaturated Re(NO)(CO)n (n = 3, 2) species can be derived from this structure by removal of carbonyl groups. A structure is found for Re(NO)(CO)5 in which the NO ligand has attached to one of the CO ligands by forming a C-N bond to give an unprecedented eta(2)-OCNO ligand. However, this structure is predicted to undergo exothermic CO loss to give Re(NO)(CO)4. The preferred structures for the binuclear derivatives Re2(NO)2(CO)n (n = 7, 6) are structures unprecedented for the manganese analogues and consist of a Re(CO)5 unit linked to a Re(NO)2(CO)(n-5) unit. However, only slightly higher in energy are structures of the type Re2(mu-NO)2(CO)n with two bridging nitrosyl groups, similar to the global minima for the manganese analogues. These results predict extensive areas of new rhenium carbonyl nitrosyl chemistry. Thus the synthesis of Re(NO)(CO)4 by methods related to the synthesis of the manganese analogue appears to be feasible. In addition, the existence of an extensive series of Re(NO)2(CO)2X derivatives, as well as a Re2(NO)4(CO)4 dimer, is predicted.     

Rhenium(I) carbonyl complexes of 2,4,6-tris(2-pyridyl)-1,3,5-triazine (TPT). Rhenium(I)-promoted methoxylation of the triazine ring carbon atom in dinuclear rhenium complexes

2,4,6-Tris(2-pyridyl)-1,3,5-triazine (TPT) bridged dinuclear rhenium(I) tricarbonyl halide complexes with the composition (mu-TPT)[ReX(CO)(3)](2) (3, X = Cl; 4, X = Br) can be made either by one-pot reaction of TPT with 2 equiv of [ReX(CO)(5)] (X = Cl and Br) in chloroform or by reacting mononuclear [ReX(CO)(3)(TPT)] (2) (1, X = Cl; 2, X = Br) with an excess amount of [ReX(CO)(5)]. Crystal data are as follows. 1: monoclinic, P2(1)/c, a = 11.751(1) A, b = 11.376(1) A, c = 15.562(2) A, beta = 103.584(2) degrees, V = 2022.0(4) A(3), Z = 4. 2: monoclinic, P2(1)/c, a = 11.896(1) A, b = 11.396(1) A, c = 15.655(1) A, beta = 104.474(2) degrees, V = 2054.9(3) A(3), Z = 4. 3: triclinic, P1, a = 11.541(2) A, b = 12.119(2) A, c = 13.199(2) A, alpha = 80.377(2) degrees, beta = 76.204(3) degrees, gamma = 66.826(2) degrees, V = 1642.5(4) A(3), Z = 2. Crystals of 4 crystallized from acetone: triclinic, P1, a = 11.586(5) A, b = 12.144(5) A, c = 13.364(6) A, alpha = 80.599(7) degrees, beta = 76.271(8) degrees, gamma = 67.158(8) degrees, V = 1678.0(12) A(3), Z = 2. Crystals of 4' are obtained from CH(2)Cl(2)-pentane solution: monoclinic, C2/c, a = 17.555(4) A, b = 15.277(3) A, c = 13.093(3) A, beta = 111.179(3) degrees, V = 3274.0(12) A(3), Z = 4. By contrast, similar reactions in the presence of methanol yielded complexes with the composition [mu-C(3)N(3)(OMe)(py)(2)(pyH)][ReX(CO)(3)](2) (5, X = Cl; 6, X = Br). Crystal data for 5: monoclinic, C2/c, a = 26.952(2) A, b = 16.602(1) A, c = 14.641(1) A, beta = 116.147(1) degrees, V = 5880.5(8) A(3), Z = 8. 6: monoclinic, C2/c, a = 27.513(3) A, b = 16.740(2) A, c = 14.837(2) A, beta = 116.925(2) degrees, V = 6092.8(10) A(3), Z = 8. An unusual metal-induced methoxylation at the carbon atom of the triazine ring of the bridging TPT ligand was observed. The nucleophilic attack of MeO(-) on C(3) results in a tetrahedral geometry around the carbon atom. Concomitantly, the uncoordinated pyridyl ring is protonated and rotated into a perpendicular orientation relative to the central C(3)N(3) ring. Reaction of TPT with [NEt(4)](2)[ReBr(3)(CO)(3)] in benzene-methanol resulted in an unexpected dinuclear complex 7, with formulation [mu-C(3)N(3)(OMe)(py)(3)][Re(CO)(3)][ReBr(CO)(3)]. The methoxylated TPT ligand functions simultaneously as a tridentate and bidentate ligand with two fac-Re(CO)(3)(+) cores. Crystal data for 7: monoclinic, P2(1)/n, a = 12.114(1) A, b = 14.878(1) A, c = 15.807(1) A, beta = 104.601(1) degrees, V = 2756.9(3) A(3), Z = 4.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

Rhenium(I)-induced cyclization of thiosemicarbazones derived from beta-keto esters

The reactions of methylacetoacetate and ethyl 2-methylacetoacetate thiosemicarbazones (H(2)L(A) and H(2)L(B), respectively) with [ReX(CO)(5)] and [ReX(CO)(3)(CH(3)CN)(2)] (X = Cl, Br) were explored under various experimental conditions. Besides the adducts fac-[ReX(CO)(3)(H(2)L)], in which the rhenium is coordinated to three carbonyl groups, the X anion, and the N,S-bidentate thiosemicarbazone ligand, the following complexes were also isolated: fac-[ReBr(CO)(3)(Hpyz(B))], the tetrameric complexes fac-[Re(pyz(A))(CO)(3)](4) and fac-[Re(pyz(B))(CO)(3)](4), and fac-[Re(pyz(B))(CO)(3)(H(2)O)] (where Hpyz(A) and Hpyz(B) are pyrazolones derived by cyclization of H(2)L(A) and H(2)L(B), respectively). The cyclization reactions were monitored by (1)H NMR spectroscopy and the complexes isolated were identified by elemental analysis, mass spectrometry, IR and (1)H NMR spectroscopy, and in some cases by X-ray diffractometry. The isolation and the full structural identification of the rather unusual fac-[ReBr(CO)(3)(Hpyz(B))], which contains the enol form of the pyrazolone ligand, affords new insight into the cyclization of thiosemicarbazones derived from beta-keto esters.     

Tricarbonylrhenium(I) complexes with thiosemicarbazone derivatives of 2-acetylpyridine and 2-pyridine formamide showing two unusual coordination modes of tridentate thiosemicarbazone ligands

[NEt(4)](2)[Re(CO)(3)Br(3)] reacts with 2-acetylpyridine phenylthiosemicarbazone (HL(1)) and 2-pyridine formamide thiosemicarbazone (HL(2)) under formation of air-stable, neutral rhenium(I) complexes of the compositions [Re(CO)(3)(L(1)-N,N,S)] and [Re(CO)(3)Br(HL(2)-N,N)]. Spectroscopic studies and X-ray crystallography show that the potentially tridentate thiosemicarbazones adopt unusual coordination modes. Whereas HL(1) deprotonates and binds to the metal in a nonplanar fashion, HL(2) acts as neutral N,N donor ligand. The bond lengths inside the chelate rings are almost uninfluenced by the overall bonding situation.     

Synthesis and characterization of the dimercury(I)-linked compound [PPn]4[(Re7C(CO)21Hg)2]. Oxidative cleavage of the mercury-mercury bond leading to carbidoheptarhenate complexes of mercury(II), including [PPN][Re7C(CO)21Hg(S=C(NME2)2)

The reaction of [PPN](3)[Re(7)C(CO)(21)] with Hg(2)(NO(3))(2).2H(2)O in dichloromethane formed the complex [PPN](4)[(Re(7)C(CO)(21)Hg)(2)] ([PPN](4)[1]), isolated in 60% yield. Analogous salts of [1](4-) with [PPh(4)](+) and [NEt(4)](+) were also prepared. The crystal structure of [PPN](4)[1] showed that two carbidoheptarhenate cores are linked by a dimercury(I) unit (d(Hg-Hg) = 2.610(4) A), with each individual mercury atom face-bridging. Oxidative cleavage of the Hg-Hg bond in [1](4-) was effected by 4-bromophenyl disulfide to form [Re(7)C(CO)(21)HgSC(6)H(4)Br](2-) ([4](2-)), by I(2) to form [Re(7)C(CO)(21)HgI](2-) ([5](2-)), and by Br(2) to form [Re(7)C(CO)(21)HgBr](2-) ([6](2-)). Oxidation of [1](4-) by ferrocenium ion (2 equiv) in the presence of tetramethylthiourea resulted in the derivative [Re(7)C(CO)(21)HgSC(NMe(2))(2)](-) ([7](-)). The molecular structure of [PPN][7] was determined by X-ray crystallography. This is the first example of a carbidoheptarhenate-mercury complex with a neutral ligand on mercury, and ligand exchange was demonstrated by displacement with triethylphosphine. Complex [7](-) can also be prepared by protonating [Re(7)C(CO)(21)HgO(2)CCH(3)](2-) in the presence of tetramethylthiourea. Cyclic voltammetry data to calibrate and compare the redox properties of compounds [1](4-) and [7](-) have been measured.     

Complexation of the triply-bonded dirhenium(II) complex Re(2)Cl(4)(mu-dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) by up to three acetylene molecules

The triply bonded dirhenium(II) synthons Re(2)X(4)(mu-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) react with acetylene at room temperature in CH(2)Cl(2) and acetone to afford the bis(acetylene) complexes Re(2)X(4)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH) (X = Cl (3), Br(4)). Compound 3 has been derivatized by reaction with RNC ligands in the presence of TlPF(6) to give unsymmetrical complexes of the type [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(CNR)]PF(6) (R = Xyl (5), Mes (6), t-Bu (7)), in which the RCN ligand has displaced the chloride ligand cis to the eta(2)-HCCH ligand. The reaction of 3 with an additional 1 equiv of acetylene in the presence of TlPF(6) gives the symmetrical all-cis isomer of [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(eta(2)-HCCH)(2)]PF(6) (8). The two terminal eta(2)-HCCH ligands in 8 are very labile and can be displaced by CO and XylNC to give the complexes [Re(2)Cl(3)(mu-dppm)(2)(mu:eta(2),eta(2)-HCCH)(L)(2)]Y (L = CO when Y = PF(6) (9); L = CO when Y = (PF(6))(0.5)/(H(2)PO(4))(0.5) (10); L = XylNC when Y = PF(6) (11)). These substitution reactions proceed with retention of the all-cis stereochemistry. Single-crystal X-ray structure determinations have been carried out on complexes 3, 5, 8, 10, and 11. In no instance have we found that the acetylene ligands undergo reductive coupling reactions.     

Rhenium-based molecular rectangles as frameworks for ligand-centered mixed valency and optical electron transfer

A series of six neutral, tetrametallic, molecular rectangles has been synthesized that have the form ([Re(CO)(3)](2)BiBzIm)(2)-mu,mu'-(LL)(2), where BiBzIm is 2,2'-bisbenzimidazolate and LL is a reducible, dipyridyl or diazine ligand. X-ray crystallographic studies of the six show that the rectangle frameworks, as defined by the metal atoms, range in size from 5.7 A x 7.2 A to 5.7 A x 19.8 A. The singly reduced rectangles are members of an unusual category of mixed-valence compounds in which the ligands themselves are the redox centers and interligand electronic communication is controlled by direct ligand orbital overlap rather than by superexchange through the metal ions. Despite nominally identical coordination-defined ligand positioning, the spectrally determined electronic strengths, H(ab)2, vary by roughly 100-fold. As shown by X-ray crystallography and computational modeling, the observed differences largely reflect detailed geometric configurational differences that can either facilitate or frustrate productive direct orbital overlap.     

Proton-Coupled Electron Transfer between 4-Cyanophenol and Photoexcited Rhenium(I) Complexes with Different Protonatable Sites

Two rhenium(I) tricarbonyl diimine complexes, one of them with a 2,2'-bipyrazine (bpz) and a pyridine (py) ligand in addition to the carbonyls ([Re(bpz)(CO)(3)(py)](+)), and one tricarbonyl complex with a 2,2'-bipyridine (bpy) and a 1,4-pyrazine (pz) ligand ([Re(bpy)(CO)(3)(pz)](+)) were synthesized, and their photochemistry with 4-cyanophenol in acetonitrile solution was explored. Metal-to-ligand charge transfer (MLCT) excitation occurs toward the protonatable bpz ligand in the [Re(bpz)(CO)(3)(py)](+) complex while in the [Re(bpy)(CO)(3)(pz)](+) complex the same type of excitation promotes an electron away from the protonatable pz ligand. This study aimed to explore how this difference in electronic excited-state structure affects the rates and the reaction mechanism for photoinduced proton-coupled electron transfer (PCET) between 4-cyanophenol and the two rhenium(I) complexes. Transient absorption spectroscopy provides clear evidence for PCET reaction products, and significant H/D kinetic isotope effects are observed in some of the luminescence quenching experiments. Concerted proton-electron transfer is likely to play an important role in both cases, but a reaction sequence of proton transfer and electron transfer steps cannot be fully excluded for the 4-cyanophenol/[Re(bpz)(CO)(3)(py)](+) reaction couple. Interestingly, the rate constants for bimolecular excited-state quenching are on the same order of magnitude for both rhenium(I) complexes.     

Binuclear manganese and rhenium carbonyls M2(CO)n (n = 10, 9, 8, 7): comparison of first row and third row transition metal carbonyl structures

The equilibrium geometries, thermochemistry, and vibrational frequencies of the homoleptic binuclear rhenium carbonyls Re2(CO)n (n = 10, 9, 8, 7) were determined using the MPW1PW91 and BP86 methods from density functional theory (DFT) with the effective core potential basis sets LANL2DZ and SDD. In all cases triplet structures for Re2(CO)n were found to be unfavorable energetically relative to singlet structures, in contrast to corresponding Mn2(CO)n derivatives, apparently owing to the larger ligand field splitting of rhenium. For M2(CO)10 (M = Mn, Re) the unbridged structures (OC)5M-M(CO)5 are preferred energetically over structures with bridging CO groups. For M2(CO)9 (M = Mn, Re) the two low energy structures are (OC)4M(micro-CO)M(CO)4 with an M-M single bond and a four-electron donor bridging CO group and (OC)4M[double bond, length as m-dash]M(CO)5 with no bridging CO groups and an M[double bond, length as m-dash]M distance suggesting a double bond. The lowest energy structures for Re2(CO)8 have Re[triple bond, length as m-dash]Re distances in the range 2.6-2.7 A suggesting the triple bonds required to give the Re atoms the favored 18-electron configuration. Low energy structures for Re2(CO)7 are either of the type (OC)(4)M[triple bond, length as m-dash]M(CO)3 with short metal-metal distances suggesting triple bonds or have a single four-electron donor bridging CO group and longer M-M distances consistent with single or double bonds. The 18-electron rule thus appears to be violated in these highly unsaturated Re2(CO)7 structures.