Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Reactions of Li- and Yb-coordinated N,N'-bis(trimethylsilyl)-beta-diketiminates: one- and two-electron reductions, deprotonation, and C-N bond cleavage

The synthesis and characterisation of novel Li and Yb complexes is reported, in which the monoanionic beta-diketiminato ligand has been (i) reduced (SET or 2 [times] SET), (ii) deprotonated, or (iii) C-N bond-cleaved. Reduction of the lithium beta-diketiminate Li(L(R,R'))[L(R,R')= N(SiMe(3))C(R)CHC(R')N(SiMe(3))] with Li metal gave the dilithium derivative [Li(tmen)(mu-L(R,R'))Li(OEt(2))](R = R'= Ph; or, R = Ph, R[prime or minute]= Bu(t)). When excess of Li was used the dimeric trilithium [small beta]-diketiminate [Li(3)(L(R,R[prime or minute]))(tmen)](2)(, R = R'= C(6)H(4)Bu(t)-4 = Ar) was obtained. Similar reduction of [Yb(L(R,R'))(2)Cl] gave [Yb[(mu-L(R,R'))Li(thf)](2)](, R = R[prime or minute]= Ph; or, R = R'= C(6)H(4)Ph-4 = Dph). Use of the Yb-naphthalene complex instead of Li in the reaction with [Yb(L(Ph,Ph))(2)] led to the polynuclear Yb clusters [Yb(3)(L(Ph,Ph))(3)(thf)], [Yb(3)(L(Ph,Ph))(2)(dme)(2)], or [Yb(5)(L(Ph,Ph))(L(1))(L(2))(L(3))(thf)(4)] [L(1)= N(SiMe(3))C(Ph)CHC(Ph)N(SiMe(2)CH(2)), L(2)= NC(Ph)CHC(Ph)H, L(3)= N(SiMe(2)CH(2))] depending on the reaction conditions and stoichiometry. The structures of the crystalline complexes 4, 6x21/2(hexane), 5(C(6)D(6)), and have been determined by X-ray crystallography (and have been published).     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

Non-innocent behaviour of imido ligands in the reactions of silanes with half-sandwich imido complexes of Nb and V: a silane/imido coupling route to compounds with nonclassical Si--H interactions

Reactions of imido complexes [M(Cp)(=NR')(PR'3)2] (M=V, Nb) with silanes afford a plethora of products, depending on the nature of the metal, substitution at silicon and nitrogen and the steric properties of the phosphine. The main products are [M(Cp)(=NR')(PR3)(H)(SiRnCl3-n)] (M=V, Nb; R'=2,6-diisopropylphenyl (Ar), 2,6-dimethylphenyl (Ar')), [Nb(Cp)(=NR')(PR'3)(H)(SiPhR2)] (R2=MeH, H2), [Nb(Cp)(==NR')(PR'3)(Cl)(SiHRnCl2-n)] and [Nb(Cp)(eta 3-N(R)SiR2--H...)(PR'3)(Cl)]. Complexes with the smaller Ar' substituent at nitrogen react faster, as do more acidic silanes. Bulkier groups at silicon and phosphorus slow down the reaction substantially. Kinetic NMR experiments supported by DFT calculations reveal an associative mechanism going via an intermediate N-silane adduct [Nb(Cp){=N(-->SiHClR2)R'}(PR'3)2] bearing a penta-coordinate silicon centre, which then rearranges into the final products through a Si--H or Si--Cl bond activation process. DFT calculations show that this imido-silane adduct is additionally stabilized by a Si--HM agostic interaction. Si--H activation is kinetically preferred even when Si--Cl activation affords thermodynamically more stable products. The niobium complexes [NbCp(=NAr)(PMe3)(H)(SiR2Cl)] (R=Ph, Cl) are classical according to X-ray studies, but DFT calculations suggest the presence of interligand hypervalent interactions (IHI) in the model complex [Nb(Cp) (==NMe)(PMe3)(H)(SiMe2Cl)]. The extent of Si--H activation in the beta-Si--HM agostic complexes [Cp{eta 3-N(R')SiR2--H}M(PR'3)(Cl)] (R'=PMe3, PMe2Ph) primarily depends on the identity of the ligand trans to the Si--H bond. A trans phosphine leads to a stronger Si--H bond, manifested by a larger J(Si--H) coupling constant. The Si--H activation diminishes slightly when a less basic phosphine is employed, consistent with decreased back-donation from the metal.     

Cyclopentadienyl chromium diimine and pyridine-imine complexes: ligand-based radicals and metal-based redox chemistry

Paramagnetic CpCr(III) complexes with antiferromagnetically-coupled anionic radical diimine and pyridine-imine ligands were prepared and characterized. The diimine chloro CpCr[(ArNCR)(2)]Cl complexes (1: Ar = 2,6-iPr(2)C(6)H(3) (Dpp), R = H; 2: Ar = 2,6-Me(2)C(6)H(3) (Xyl), R = Me; 3: Ar = 2,4,6-Me(3)C(6)H(2) (Mes), R = Me) were synthesized by treatment of previously reported Cr(diimine)(THF)(2)Cl(2) precursors with NaCp. Reduction of 1 with Zn gives CpCr[(DppNCH)(2)], 4, resulting from reduction of Cr(III) to Cr(II) with retention of the ligand-based radical. Alkoxide complexes CpCr[(DppNCH)(2)](OCR(2)R') (5: R = Me, R' = Ph; 6: R = iPr, R' = H) were synthesized by protonolysis of Cp(2)Cr with HOCR(2)R' in the presence of the neutral diimine and catalytic base. The corresponding radical pyridine-imine complexes CpCr(PyCHNMes)Cl (9), CpCr(PyCHNMes) (8), and CpCr(PyCHNMes)(OCMe(2)Ph) (11), were prepared by analogous routes. Oxidation of 8 with iodine gives CpCr(PyCHNMes)I (10) where oxidation of Cr(II) to Cr(III) again occurs with retention of the anionic pyridine-imine radical ligand. The molecular structures of complexes 1, 2, 4-8, 10 and 11 were determined by single-crystal X-ray diffraction. Unusual low energy bands were observed in the UV-vis spectra of the reported complexes, with particularly strong transitions observed for the Cr(II) complexes 4 and 8. The electronic structure of pyridine-imine complexes 8 and 10 were investigated by theoretical calculations.     

Synthesis and structure of a series of new d(1)-Aryl imido-vanadium(IV) complexes stabilized by n-donor ligands

A family of new coordination vanadium(IV) compounds supported by a terminal or bridged aryl imido ligand are reported. Reaction of V(NMe(2))(4) with anilines ArNH(2), where Ar = 2,6-i-Pr(2)-C(6)H(3), 2,6-Me(2)-C(6)H(3), Ph, 2,6-Cl(2)-C(6)H(3), and C(6)F(5), afforded the diamagnetic imido-bridged complexes [V(NAr)(NMe(2))(2)](2) (1a-e). Chlorination of 1a-e with trimethylchlorosilane afforded complexes 2a-e formulated as [V(=NAr)Cl(2)(NHMe(2))(x)()](n)(). One-pot reaction of V(NMe(2))(4) with ArNH(2) in the presence of an excess of trimethylchlorosilane gave the five-coordinate compound [V(=NAr)Cl(2)(NHMe(2))(2)] (3a-e). Reaction of 3a-e with pyridine, bipyridine (bipy), or N,N,N',N'-tetramethylethylenediamine (tmeda) gave respectively the six-coordinate tris- or bis(pyridine) adducts [V(=NAr)Cl(2)(Py)(3)] (4a-e) or [V(=NAr)Cl(2)(Py)(2)(NHMe(2))] (5a), bipyridine complexes [V(=NAr)Cl(2)(bipy)(NHMe(2))] (5a-e) and [V(=NAr)Cl(2)(bipy)(Py)] (9a), and tmeda adduct [V(=NAr)Cl(2)(tmeda)(NHMe(2))] (10a). Moreover, five-coordinate complexes free of NHMe(2) ligands, such as [V(=NAr)Cl(2)(Py)(2)] (5a), [V(=NAr)Cl(2)(bipy)] (8a), and [V(=NAr)Cl(2)(tmeda)] (11a), were directly prepared starting from precursors 2a-e. All compounds were totally characterized by spectroscopic methods (IR, (1)H NMR for diamagnetic complexes, and EPR for paramagnetic complexes), elemental analysis, magnetism, and single-crystal X-ray diffraction studies for 1b, 3a, 3d, 4b, 4d, 7c, 10a, and 11a.     

Group 6 imido complexes supported by diamido-donor ligands

Reactions of the lithiated diamido-pyridine or diamido-amine ligands Li(2)N(2)N(py) or Li(2)N(2)N(am) with [W(NAr)Cl(4)(THF)] (Ar = Ph or 2,6-C(6)H(3)Me(2); THF = tetrahydrofuran) afforded the corresponding imido-dichloride complexes [W(NAr)(N(2)N(py))Cl(2)] (R = Ph, 1, or 2,6-C(6)H(3)Me(2), 2) or [W(NAr)(N(2)N(am))Cl(2)] (R = Ph, 3, or 2,6-C(6)H(3)Me(2), 4), respectively, where N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NSiMe(3))(2) and N(2)N(am) = Me(3)SiN(CH(2)CH(2)NSiMe(3))(2). Subsequent reactions of 1 with MeMgBr or PhMgCl afforded the dimethyl or diphenyl complexes [W(NPh)(N(2)N(py))R(2)] (R = Me, 5, or Ph, 6), respectively, which have both been characterized by single crystal X-ray diffraction. Reactions of Li(2)N(2)N(py) or Li(2)N(2)N(am) with [Mo(NR)(2)Cl(2)(DME)] (R = (t)Bu or Ph; DME = 1,2-dimethoxyethane) afforded the corresponding bis(imido) complexes [Mo(NR)(2)(N(2)N(py))] (R = (t)Bu, 7, or Ph, 8) and [Mo(N(t)Bu)(2)(N(2)N(am))] (9).     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Insertion reactions of trans-Mo(dmpe)2(H)(NO) with imines

The insertion chemistry of the hydride complex trans-Mo(dmpe)(2)(H)(NO) (1) (dmpe = bis(dimethylphosphino)ethane) with imines has been investigated. It was found that disubstituted aromatic imines RCH[double bond]NR' (R, R' = Ar) insert into the Mo-H bond of 1, while a series of various mono- and other disubstituted imines do not react. The insertion products trans-Mo(dmpe)(2)(NO)[NR'(CH(2)R)] (R = R' = Ph (2); R = Cp(2)Fe, R' = Ph (3); R = Ph, R' = Cp(2)Fe (4); R = 1-naphthyl, R' = Ph (5)) have been isolated and fully characterized by elemental analysis, IR and NMR spectroscopy, and mass spectrometry. The imine PhCH[double bond]NC(10)H(7) (C(10)H(7) = 1-naphthyl) reacted with 1 establishing an equilibrium to produce the nonisolable complex trans-Mo(dmpe)(2)(NO)[NC(10)H(7)(CH(2)Ph)] (6). The equilibrium constant for this reaction has been derived from VT-NMR measurements, and the Delta H and Delta S values of this reaction were calculated to be -48.8 +/- 0.4 kJ.mol(-1) and -33 +/- 1 J.K(-1).mol(-1) reflecting a mild exothermic process and its associative nature. Single-crystal X-ray diffraction analyses were carried out on 2-5.     

Rh(I) coordination chemistry of chiral alpha-aminophosphine(eta6-arene)chromium tricarbonyl ligands

The diastereoselective addition of Ph(2)PH to the chiral ortho-substituted eta(6)-benzaldimine complexes (eta(6)-o-X-C(6)H(4)CH=NAr)Cr(CO)(3) (1, X = MeO, Ar = p-C(6)H(4)OMe; 2, X = Cl, Ar = Ph) leads to the formation of the corresponding chiral aminophosphines (alpha-P,N) Ph(2)P-CH(Ar(1))-NHAr(2) (3, Ar(1) = o-C(6)H(4)(OCH(3))[Cr(CO)(3)], Ar(2) = p-C(6)H(4)OCH(3); 4, Ar(1) = o-C(6)H(4)Cl[Cr(CO)(3)], Ar(2) = Ph) in equilibrium with the starting materials. The uncomplexed benzaldimine (o-ClC(6)H(4)CH=NPh), 2', analogously produces an equilibrium amount of the corresponding aminophosphine Ph(2)P-CH(Ar(1))-NHAr(2) (4', Ar(1) = o-C(6)H(4)Cl, Ar(2) = Ph). Depending on the equilibrium constant, the subsequent addition of (1)/(2) equiv of [RhCl(COD)](2) (COD = 1,5-cyclooctadiene) leads to either Ph(2)PH oxidative addition in the case of 3 or to the corresponding [RhCl(COD)(alpha-P,N)] complexes [RhCl(COD)(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)] (5) and [RhCl(COD)(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)] (5') in the cases of the aminophosphines 4 and 4'. The addition of the latter ligands, as racemic mixtures, to (1)/(4) equiv of [Rh(CO)(2)Cl](2) leads to the [RhCl(CO)(alpha-P,N)(2)] complexes [RhCO(Ph(2)P-CH[o-C(6)H(4)Cl[Cr(CO)(3)]]-NHPh)(2)Cl] (7) or [RhCO(Ph(2)P-CH(o-C(6)H(4)Cl)-NHPh)(2)Cl] (7') as mixtures of (R(C),S(C))/(S(C),R(C)) and (R(C),R(C))/(S(C),S(C)) diastereomers. The rhodium complexes 5 and 7' have been fully characterized by IR and (31)P NMR spectroscopies and X-ray crystallography. These compounds exhibit intramolecular Rh-Cl.H-N interactions in the solid state and in solution. The stability of the new rhodium complexes has been studied under different CO pressures. Under 1 atm of CO, 5 is converted to an unstable complex [RhCl(CO)(2)(alpha-P,N)], 6, which undergoes ligand redistribution leading to 7 plus an unidentified complex. This reaction is inhibited under higher CO or syngas pressure, as confirmed by the observation of the same catalytic activity in hydroformylation when styrene was added to a catalytic mixture that was either freshly prepared or left standing for 20 h under high CO pressure.     

Amidoximes provide facile platinum(II)-mediated oxime-nitrile coupling

The nucleophilic addition of amidoximes R'C(NH(2))═NOH [R' = Me (2.Me), Ph (2.Ph)] to coordinated nitriles in the platinum(II) complexes trans-[PtCl(2)(RCN)(2)] [R = Et (1t.Et), Ph (1t.Ph), NMe(2) (1t.NMe(2))] and cis-[PtCl(2)(RCN)(2)] [R = Et (1c.Et), Ph (1c.Ph), NMe(2) (1c.NMe(2))] proceeds in a 1:1 molar ratio and leads to the monoaddition products trans-[PtCl(RCN){HN═C(R)ONC(R')NH(2)}]Cl [R = NMe(2); R' = Me ([3a]Cl), Ph ([3b]Cl)], cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}] [R = NMe(2); R' = Me (4a), Ph (4b)], and trans/cis-[PtCl(2)(RCN){HN═C(R)ONC(R')NH(2)}] [R = Et; R' = Me (5a, 6a), Ph (5b, 6b); R = Ph; R' = Me (5c, 6c), Ph (5d, 6d), correspondingly]. If the nucleophilic addition proceeds in a 2:1 molar ratio, the reaction gives the bisaddition species trans/cis-[Pt{HN═C(R)ONC(R')NH(2)}(2)]Cl(2) [R = NMe(2); R' = Me ([7a]Cl(2), [8a]Cl(2)), Ph ([7b]Cl(2), [8b]Cl(2))] and trans/cis-[PtCl(2){HN═C(R)ONC(R')NH(2)}(2)] [R = Et; R' = Me (10a), Ph (9b, 10b); R = Ph; R' = Me (9c, 10c), Ph (9d, 10d), respectively]. The reaction of 1 equiv of the corresponding amidoxime and each of [3a]Cl, [3b]Cl, 5b-5d, and 6a-6d leads to [7a]Cl(2), [7b]Cl(2), 9b-9d, and 10a-10d. Open-chain bisaddition species 9b-9d and 10a-10d were transformed to corresponding chelated bisaddition complexes [7d](2+)-[7f](2+) and [8c](2+)-[8f](2+) by the addition of 2 equiv AgNO(3). All of the complexes synthesized bear nitrogen-bound O-iminoacylated amidoxime groups. The obtained complexes were characterized by elemental analyses, high-resolution ESI-MS, IR, and (1)H NMR techniques, while 4a, 4b, 5b, 6d, [7b](Cl)(2), [7d](SO(3)CF(3))(2), [8b](Cl)(2), [8f](NO(3))(2), 9b, and 10b were also characterized by single-crystal X-ray diffraction.     

Synthesis and structures of selected benzamidinates of Li, Na, Al, Zr and Sn(II) using the C1-symmetric ligands [N(SiMe3)C(C6H4Me-4 or Ph)NPh]-

Several compounds based on the C(1)-symmetric ligands [N(R)C(Ar)NPh]- [abbreviated as B1 (Ar = C(6)H(4)Me-4) or B2 (Ar = Ph), R = SiMe(3)] are reported. They are the crystalline metal benzamidinates [Li(mu:kappa2-B1)(OEt2)](2) (1), [Al(kappa2-B1)2Me] (2), [Al(kappa2-B1)2X] [X = Cl/Me, 1 : 1 (3)], [Sn(kappa2-B1)2] (4), Zr(kappa2-B1)2Cl2 (5), [Zr(kappa2-B1)3Cl] (6), [Na(mu:kappa2-B1)(tmeda)]2 (7), K[B1] (8), Li(B2)(OEt2) (9) and Zr(kappa2-B1)3Cl (10) and the known benzamidine Z-H2NC(C6H4Me-4) = NPh (11). They were prepared by (i) insertion of the nitrile 4-MeC6H4CN (1, 7, 8, 11) or PhCN (9) into the appropriate M-N(R')Ph [R' = R and M = Li (1, 9), Na (7), K (8)] bond and subsequent hydrolysis for 11 [R' = H and M = Li], or (ii) a ligand transfer reaction using the lithium amidinate 1 and Al(Me)2Cl (2, 3), SnCl2 (4) or ZrCl4 (5, 6), or Li(B2) and ZrCl4 (10). The X-ray structures of 1, 2, 3, 4, 6b (i.e..3PhMe) 7, and 11 are presented. Exploratory polymerisation experiments are described, using 2, 5 or 6 as a procatalyst with methylaluminoxane (MAO) (Al : Zr ca. 500 : 1) as promoter. Thus toluene solutions were exposed to C2H4 under ambient conditions; while 2 was unresponsive, 5 and 6 showed modest activity in the formation of polyethylene.     

Synthesis, characterization, and structural studies of multimetallic ferrocenyl carbene complexes of group VII transition metals

Fischer carbene complexes of the group VII transition metals (Mn and Re) containing at least two or three different transition metal substituents, all in electronic contact with the carbene carbon atom, were synthesized. The structural features and their relevance to bonding in the carbene multimetal compounds were investigated, as they represent indicators of possible reactivity sites in polymetallic carbene assemblies. For complexes of the type [ML(x){C(OR)R'}] (ML(x) = MnCp(CO)(2) or Re(2)(CO)(9)), ferrocenyl (Fc) was chosen as the R' substituent, while the OR substituent was systematically varied between an ethoxy or a titanoxy group, to yield the complexes 1a (ML(x) = MnCp(CO)(2), R = Et, R' = Fc), 2a (ML(x) = MnCp(CO)(2), R = TiCp(2)Cl, R' = Fc), 3a (ML(x) = Re(2)(CO)(9), R = Et, R' = Fc), and 4a (ML(x) = Re(2)(CO)(9), R = TiCp(2)Cl, R' = Fc). Direct lithiation of the ferrocene with n-BuLi/TMEDA at elevated temperatures, followed by the Fischer method of carbene preparation, resulted in formation of the novel biscarbene complexes with bridging ferrocen-1,1'-diyl (Fc') substituents [{π-Fe(C(5)H(4))(2)-C,C'}{C(OEt)ML(x)}(2)] (1b, ML(x) = MnCp(CO)(2); 3b, ML(x) = Re(2)(CO)(9)) or the unusual bimetallacyclic bridged biscarbene complexes [{π-TiCp(2)O(2)-O,O'}{π-Fe(C(5)H(4))(2)-C,C'}{CML(x)}(2)] (2b, ML(x) = MnCp(CO)(2); 4b, ML(x) = Re(2)(CO)(9)). The target compounds that were isolated displayed a variety of different geometric isomers and conformations. The greater reactivity of the binary dirhenium acylates in solution, compared to that of the cyclopentadienyl manganese acylate, resulted in a complex reaction mixture. Although the stabilization of hydroxycarbene or hydrido-acyl intermediates of dirhenium carbonyls could not be achieved, their existence in solution was confirmed by the isolation of [(π-H)(2)-(Re(CO)(4){C(O)Fc})(2)] (8), the unique dichloro-bridged biscarbene complex fac-[(π-Cl)(2)-(Re(CO)(3){C(OEt)Fc})(2)] (6), the known hydrido complex [Re(3)(CO)(14)H] (5), the acyl complex [Re(CO)(5){C(O)Fc}] (7), and the aldehyde-functionalized eq-[Re(2)(CO)(9){C(OTiCp(2)Cl)(Fc'CHO)}] (9).     

Gas-phase synthesis and reactivity of binuclear gold hydride cations, (R3PAu)2H+ (R = Me and Ph)

Electrospray ionization of a mixture of the two gold phosphine chlorides, R3PAuCl (R = Ph and Me), silver nitrate and the amino acid N,N-dimethylglycine (DMG) yields a range of gold containing cluster ions including: (R3P)Au(PR'3)+; (R3PAu)(R'3PAu)Cl+ and (R3PAu)(R'3PAu)(DMG-H)+ (where R = R' = Ph; R = R' = Me; R = Me and R' = Ph). Collision induced dissociation (CID) of the (R3PAu)(R'3PAu)(DMG-H)+ precursor ions yielded the hitherto unknown gold hydride dimers (R3PAu)(R'3PAu)H+. The gas-phase chemistry of these dimers was studied using ion-molecule reactions, collision induced dissociation, electronic excitation dissociation (EED) and DFT calculations on the (H3PAu)2H+ model system. A novel phosphine ligand migration was found to occur prior to fragmentation under CID conditions and this was supported by DFT calculations, which revealed a transition state with a bridging phosphine ligand.     

Stereospecific synthesis of polysubstituted E-olefins by reaction of acyclic nitrones with free and platinum(II) coordinated organonitriles

Free nitriles NCCH2R (1a R = CO2Me, 1b R = SO2Ph, and 1c R = COPh) with an acidic alpha-methylene react with acyclic nitrones -O+N(Me)=C(H)R' (2a R' = 4-MeC6H4 and 2b R' = 2,4,6-Me3C6H2), in refluxing CH2Cl2, to afford stereoselectively the E-olefins (NC)(R)C=C(H)R' (3a-3c and 3a'-3c'), whereas, when coordinated at the platinum(II) trans-[PtCl2(NCCH2R)2] complexes (4a R = CO2Me and 4b R = Cl), they undergo cycloaddition to give the (oxadiazoline)-PtII complexes trans-[PtCl2{N=C(CH2R)ON(Me)C(H)R'}2] (R = CO2Me, Cl and R' = 4-MeC6H4, 2,4,6-Me3C6H2) (5a-5d). Upon heating in CH2Cl2, 5a affords the corresponding alkene 3a. The reactions are greatly accelerated when carried out under focused microwave irradiation, particularly in the solid phase (SiO2), without solvent, a substantial increase of the yields being also observed. The compounds were characterized by IR and 1H, 13C, and 195Pt NMR spectroscopies, FAB+-MS, elemental analyses and, in the cases of the alkene (NC)(CO2Me)C=C(H)(4-MeC6H4) 3a and of the oxadiazoline complex trans-[PtCl2{N=C(CH2Cl)ON(Me)C(H)(4-C6H4Me)}2] 5c, also by X-ray diffraction analyses.     

Synthesis,structure, and reactivity of some sterically hindered (Silylamino)phosphines

A series of new (silylamino)phosphines that contain sterically bulky silyl groups on nitrogen were prepared by deprotonation/substitution reactions of the hindered disilylamines t-BuR(2)Si(Me(3)Si)NH (1, R = Me; 2, R = Ph) and (Et(3)Si)(2)NH (3). Sequential treatment of the N-lithio derivatives of 1-3 with PCl(3) or PhPCl(2) and MeLi gave the corresponding (silylamino)phosphines t-BuR(2)Si(Me(3)Si)NP(R')Me (5, R = Me, R' = Ph; 6, R = Ph, R' = Me) and (Et(3)Si)(2)NP(R)Me (11, R = Me; 12, R = Ph) in high yields. Two of the P-chloro intermediates t-BuR(2)Si(Me(3)Si)NP(Ph)Cl (7, R = Ph; 9, R = Me) were also isolated and fully characterized. Hydrolysis of 7 afforded the crystalline PH-substituted aminophosphine oxide t-BuPh(2)SiN(H)P(Ph)(=O)H (10). Thermal decomposition of 7 occurred with elimination of Me(3)SiCl and formation of a novel P(2)N(2) four-membered ring system (36) that contains both P(III) and P(V) centers. Reactions of the N-lithio derivatives of amines 1 and 2 with phosphorus trihalides afforded the thermally stable -PF(2) derivatives t-BuR(2)Si(Me(3)Si)NPF(2) (13, R = Me; 14, R = Ph) and the unstable -PCl(2) analogue 17 (R = Ph). Reduction (using LiAlH(4)) of the SiPh-substituted dihalophosphines 14 and 17 gave the unstable parent phosphine t-BuPh(2)Si(Me(3)Si)NPH(2) (15). The P-organo-substituted (silylamino)phosphines underwent oxidative bromination to afford high yields of the corresponding N-silyl-P-bromophosphoranimines t-BuR(2)SiN=P(R')(Me)Br (18, R = R' = Me; 19, R = Me, R' = Ph; 20, R = Ph, R' = Me) and Et(3)SiN=P(R)(Me)Br (23, R = Me; 24, R = Ph). Subsequent treatment of these reactive PBr compounds with lithium trifluoroethoxide or phenoxide produced the corresponding PO derivatives t-BuR(2)SiN=P(R')(Me)OR' ' (25 and 26, R' ' = CH(2)CF(3); 28-30, R' ' = Ph) and Et(3)SiN=P(R)(Me)OR' (31 and 33, R' = CH(2)CF(3); 32 and 34, R = Ph), respectively. Many of the new compounds containing the bulky tert-butyldiphenylsilyl group, t-BuPh(2)Si, were solids that gave crystals suitable for X-ray diffraction studies. Consequently, the crystal structures of three (silylamino)phosphines (6, 7, and 14), one (silylamino)phosphine oxide (10), one N-silylphosphoranimine (30), and the cyclic compound 36 were determined. Among the (silylamino)phosphines, the P-N bond distances [6, N-PMe(2), 1.725(3) A; 7, N-P(Ph)Cl, 1.68(1) A, 14, N-PF(2), 1.652(4) A] decreased significantly as the electron-withdrawing nature of the phosphorus substituents increased. The N-silylphosphoranimine t-BuPh(2)SiN=PMe(2)OPh (30), which is a model system for poly(phosphazene) precursors, had a much shorter P=N distance of 1.512(6) A and a wide Si-N-P bond angle of 166.4(3) degrees. A similar P=N bond distance [1.514(7) A] and Si-N-P angle [169.9(6) degrees ] were observed for the exocyclic P=N-Si linkage in the ring compound 36, while the phosphine oxide 10 had P-N and P=O distances of 1.637(4) and 1.496(3) A, respectively, and a Si-N-P angle of 134.3(2) degrees.     

Hydrolysis, hydrosulfidolysis, and aminolysis of imido(methyl)rhenium complexes

The tris(imido)methylrhenium complex CH3Re(NAd)3 (1a, Ad = 1-adamantyl) reacts with H2O to give CH3Re(NAd)2O (2a) and AdNH2. The resulting di(imido)oxo species can further react with another molecule of H2O to generate CH3Re(NAd)O2 (3a). The kinetics of these reactions have been studied by means of 1H NMR and UV-vis spectroscopies. The second-order rate constant for the reaction of 1a with H2O at 298 K in C6H6 is 3.3 L mol-1 s-1, which is much larger than the value 1 x 10(-4) L mol-1 s-1 obtained for the reaction between CH3Re(NAr)3 (1b, Ar = 2,6-diisopropylphenyl) and H2O in CH3CN at 313 K. Both 1a and 1b react with H2S to produce the rhenium(VII) sulfide, (CH3Re(NR)2)2(mu-S)2 (4a, R = Ad; 4b, R = Ar), with second-order rate constants of 17 and 1.6 x 10(-4) L mol-1 s-1 in C6H6 and CH3CN, respectively. Complex 4b has been structurally characterized. The crystal data are as follows: space group C2/c, a = 30.4831 (19) A, b = 10.9766 (7) A, c = 18.1645 (11) A, beta = 108.268(1) degrees, V = 5771.5 (6) A3, Z = 4. The reaction between CH3Re(NAr)2O (2b) and H2S also yields the dinuclear compound 4b. Unlike 1b, 1a reacts with aniline derivatives to give mixed imido rhenium complexes.     

Regioselective HON-addition of bifunctional hydrazone oximes to Pt(IV)-bound nitriles

Treatment of trans-[PtCl(4)(RCN)(2)](R = Me, Et) with the hydrazone oximes MeC(=NOH)C(R')=NNH(2)(R' = Me, Ph) at 45 degrees C in CH(2)Cl(2) led to the formation of trans-[PtCl(4)(NH=C(R)ON=C(Me)C(R')=NNH(2))(2)](R/R' = Me/Ph 1, Et/Me 2, Et/Ph 3) due to the regioselective OH-addition of the bifunctional MeC(=NOH)C(R')=NNH(2) to the nitrile group. The reaction of 3 and Ph(3)P=CHCO(2)Me allows the formation of the Pt(II) complex trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NNH(2))2](4). In 4, the imine ligand was liberated by substitution with 2 equivalents of bis(1,2-diphenylphosphino)ethane (dppe) in CDCl(3) to give, along with the free ligand, the solid [Pt(dppe)(2)]Cl(2). The free iminoacyl hydrazone, having a restricted life-time, decomposes at 20-25 degrees C in about 20 h to the parent organonitrile and the hydrazone oxime. The Schiff condensation of the free NH(2) groups of 4 with aromatic aldehydes, i.e. 2-OH-5-NO(2)-benzaldehyde and 4-NO(2)-benzaldehyde, brings about the formation of the platinum(II) complexes trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NN=CH(C(6)H(3)-2-OH-5-NO(2))2](5) and trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NN=CH(C(6)H(4)-4-NO(2))2](6), respectively, containing functionalized remote peripherical groups. Metallization of 5, which can be considered as a novel type of metallaligand, was achieved by its reaction with M(OAc)(2).nH(2)O (M = Cu, n= 2; M = Co, n= 4) in a 1:1 molar ratio furnishing solid heteronuclear compounds with composition [Pt]:[M]= 1:1. The complexes were characterized by C, H, N elemental analyses, FAB+ mass-spectrometry, IR, 1H, 13C[1H] and (195)Pt NMR spectroscopies; X-ray structures were determined for 3, 4 and 5.     

Suzuki coupling at the periphery of diruthenium coordination and organometallic compounds

A series of diruthenium compounds, Ru2(DArF)3(L")Cl (2), where the auxiliary ligand DArF is DmAniF or D(3,5-Cl2Ph)F and L" is one of the diarylformamidinate ligands containing at least one biphenyl, were prepared from Suzuki reactions between Ru2(DArF)3(L')Cl (1), where L' is (4-I-Ph)NC(H)NPh (N-(4-iodophenyl)-N'-phenylformamidinate) or D(4-I-Ph)F (N,N'-di(4-iodophenyl)formamidinate), and ArB(OH)2 (Ar = Ph and 4-CH3C(O)Ph) in satisfactory yields. Alkynylation of the type 2 compounds with LiCCPh yielded the alkynyl derivatives Ru2(DArF)3(L")(CCPh) (3). Alternatively, type 3 compounds can be prepared from the Suzuki coupling reaction between Ru2(DArF)3(L')(C2Ph) and ArB(OH)2. A structural comparison between the type 1 and 2 compounds revealed minimal changes in the coordination sphere of Ru2 core. Cyclic voltammograms of Suzuki derivatives resemble those of the parent compounds, indicating the retention of the electrophore characteristic of diruthenium species upon peripheral modification.     

Synthesis of cationic rhenium(VII) oxo imido complexes and their tunability towards oxygen atom transfer

A facile method is described for the synthesis of cationic Re(VII) cis oxo imido complexes of the form [Re(O)(NAr)(salpd)+] (salpd = N,N'-propane-1,3-diylbis(salicylideneimine)), 4, [Re(O)(NAr)(saldach)+] (saldach = N,N'-cyclohexane-1,3-diylbis(salicylideneimine)), 5, and [Re(O)(NAr)(hoz)2+] (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline) (Ar = 2,4,6,-(Me)C(6)H(2); 4-(OMe)C(6)H(4); 4-(Me)C(6)H(4); 4-(CF3)C6H4; 4-MeC(6)H(4)SO(2)), 6, from the reaction of oxorhenium(V) [(L)Re(O)(Solv)+] (1-3) and aryl azides under ambient conditions. Unlike previously reported cationic Re(VII) dioxo complexes, these cationic oxo imido complexes can be obtained on a preparative scale, and an X-ray crystal structure of [Re(O)(NMes)(saldach)+], 5a, has been obtained. Despite the multiple stereoisomers that could arise from tetradentate ligation of salen ligands to rhenium, one major isomer is observed and isolated in each instant. The electronic rationalization for stereoselectivity is discussed. Investigation of the mechanism suggests that the reactions of Re(V) with aryl azides proceed through an azido adduct similar to the group 5 complexes of Bergman and Cummins. Treatment of the cationic oxo imido complexes with a reductant (PAr(3), PhSMe, or PhSH) results in oxygen atom transfer (OAT) and the formation of cationic Re(V) imido complexes. [(salpd)Re(NMes)(PPh(3))(+)] (7) and [(hoz)2Re(NAr)(PPh(3))(+)] (Ar = m-OMe phenyl) (9) have been isolated on a preparative scale and fully characterized including an X-ray single-crystal structure of 7. The kinetics of OAT, monitored by stopped-flow spectroscopy, has revealed rate saturation for substrate dependences. The different plateau values for different oxygen acceptors (Y) provide direct support for a previously suggested mechanism in which the reductant forms a prior-equilibrium adduct with the rhenium oxo (ReVII = O<--Y). The second-order rate constants of OAT, which span more than 3 orders of magnitude for a given substrate, are significantly affected by the electronics of the imido ancillary ligand with electron-withdrawing imidos being most effective. However, the rate constant for the most active oxo imido rhenium(VII) is 2 orders of magnitude slower than that observed for the known cationic dioxo Re(VII) [(hoz)2Re(O)(2)(+)].