Chemical structures from the analysis of domain-averaged fermi holes. Nature of the Mn-Mn bond in bis(pentacarbonylmanganese)

Because of conflicting and contradictory classification based on traditional AIM characteristics, the nature of the Mn-Mn bond has been and still is the subject of continuing discussions. To overcome the existing inconsistencies in the interpretation of the nature of this bond, the bonding in Mn2(CO)10 has been analyzed and discussed in terms of new recently proposed methodology known as the analysis of domain-averaged Fermi holes. It has been shown that this analysis is able to reconcile the conflicting conclusions of earlier AIM-based studies with traditional anticipations based on simple electron counting rules. According to Fermi hole analysis, the Mn-Mn bond has the character of the more or less ordinary covalent single sigma bond, but the analysis also brings clear evidence in favor of Mn . . . (CO) intramolecular interactions between the metal atom and the ligands bonded to the other metal atom. These interactions could be responsible for the observed decrease of electron density at the bond critical point detected in AIM studies.     

Structure and bonding in binuclear metal carbonyls from the analysis of domain averaged Fermi holes. I. Fe2(CO)9 and Co2(CO)8

The nature of the bonding in the above carbonyls was studied using the analysis of domain averaged Fermi holes (DAFH). The results straightforwardly confirm the conclusions of earlier theoretical studies in which the existence of direct metal-metal bond, anticipated for the above carbonyls on the basis of 18-electron rule, was questioned. In addition to indicating the lack of direct metal-metal bond, the DAFH analysis also allowed to characterize the nature of the electron pairs involved in the bonding of the bridging ligands. The analysis has shown that because the number of available electron pairs is not sufficient for the formation of ordinary localized 2c-2e bonds between terminal M(CO)(3) fragments and the bridging ligands, the bonding in both carbonyls exhibits typical features of electron deficiency and one bonding electron pair is effectively involved in multicenter 3c-2e bonding. Because of the symmetry of the complexes the bridging ligands are not distinguishable and all M-C-M bridges have a partial 3c-2e nature via resonance of the localized structures.     

Distinct Stepwise Reduction of a Nickel?Nickel‐Bonded Compound Containing an α‐Diimine Ligand: From Perpendicular to Coaxial Structures

A nickel? nickel‐bonded complex, [{Ni(μ‐L^.?)}₂] ( 1 ; L=[(2,6‐iPr₂C₆H₃)NC(Me)]₂), was synthesized from reduction of the LNiBr₂ precursor by sodium metal. Further controllable reduction of 1 with 1.0, 2.0 and 3.0 equiv of Na, respectively, afforded the singly, doubly, and triply reduced compounds [Na(DME)₃] ? [{Ni(μ‐L^.?)}₂] ( 2 ; DME=1,2‐dimethoxyethane), [Na(Et₂O)]Na[(L^.?)Ni? NiL^2?] ( 3 ), and [Na(Et₂O)]₂Na[L^2?Ni? NiL^2?] ( 4 ). Here L represents the neutral ligand, L^.? denotes its radical monoanion, and L^2? is the dianion. All of the four compounds feature a short Ni? Ni bond from 2.2957(6) to 2.4649(8) Å. Interestingly, they display two different structures: the perpendicular ( 1 and 2 ) and the coaxial ( 3 and 4 ) structure, in which the metal? metal bond axis is perpendicular to or collinear with the axes of the α‐diimine ligands, respectively. The electronic structures, Ni? Ni bonding nature, and energetic comparisons of the two structure types were investigated by DFT computations.     

Chemical bonding in ternary magnesium hydrides

The electronic structure of various alkali and alkaline–earth magnesium‐based hydrides was investigated in detail. These types of crystalline compounds show MgH₄ or MgH₆ units ordered within a light‐metal framework. We investigated the nature of the chemical bonding in these units by means of quantum chemical calculations of several related clusters. The properties of the charge density of the clusters, within the framework of the theory of atoms in molecules, was analyzed. A further set of computations of the band structure of the solid hydrides was conducted using a state‐of the‐art density functional‐based method and the mechanism of stabilization of the Mg? H units is discussed. It was found that the properties obtained at the molecular level correlate well with those of the solid crystals, indicating the molecular nature of the extended systems in which the units MgH_x, x = 4, 6, are stabilized by means of Mg? H closed‐shell interactions. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 150–164, 2003     

Metal- and chemical-oxidant-free C-H/C-H cross-coupling of aromatic compounds: the use of radical-cation pools

Pool and couple: A method for oxidative C-H/C-H cross-coupling has been developed using "radical-cation pools". Aromatic compounds react with aryl radical cations, which are generated and accumulated by low-temperature electrolysis (see scheme). This method avoids both the nonselective oxidation of substrates and oxidation of products and effects the C-H/C-H cross-coupling of aromatic compounds without metal complexes and chemical oxidants.     

Investigations on the coupling of ethylene and alkynes in [IrTp Me2] compounds: water as an effective trapping agent

The reaction of the bis(ethylene) complex [Tp(Me(2) )Ir(C(2)H(4))(2)] (1) (Tp(Me(2) ): hydrotris(3,5-dimethylpyrazolyl)borate) with two equivalents of dimethyl acetylenedicarboxylate (DMAD) in CH(2)Cl(2) at 25 degrees C gives the hydride-alkenyl species [Tp(Me(2) )IrH{C(R)=C(R)C(R)=C(R)CH=CH(2)}] (2, R: CO(2)Me) in high yield. A careful study of this system has established the active role of a number of intermediates en route to producing 2. The first of these is the iridium(I) complex [Tp(Me(2) )Ir(C(2)H(4))(DMAD)] (4) formed by substitution of one of the ethylene ligands in 1 by a molecule of DMAD. Complex 4 reacts further with another equivalent of the alkyne to give the unsaturated metallacyclopentadiene [Tp(Me(2) )Ir{C(R)=C(R)C(R)=C(R)}], which can be trapped by added water to give adduct 7, or can react with the C(2)H(4) present in solution generating complex 2. This last step has been shown to proceed by insertion of ethylene into one of the Ir--C bonds of the metallacyclopentadiene and subsequent beta-H elimination. Complex 1 reacts sequentially with one equivalent of DMAD and one equivalent of methyl propiolate (MP) in the presence of water, with regioselective formation of the nonsymmetric iridacyclopentadiene [Tp(Me(2) )Ir{C(R)=C(R)C(H)=C(R)}(H(2)O)] (9). Complex 9 reacts with ethylene giving a hydride-alkenyl complex 10, related to 2, in which the C(2)H(4) has inserted regiospecifically into the Ir--C(R) bond that bears the CH functionality. Heating solutions of either 2 or 10 in CH(2)Cl(2) allows the formation of the allyl species 3 or 11, respectively, by simple stereoselective migration of the hydride ligand to the Calpha alkenyl carbon atom and concomitant bond reorganization of the resulting organic chain. All the compounds described herein have been characterized by microanalysis, IR and NMR spectroscopy, and for the case of 3, 7, 7CO, 8NCMe, 9, 9NCMe, and 10, also by single-crystal X-ray diffraction studies.     

Exploring the oxidative cyclization of substituted N-aryl enamines: Pd-catalyzed formation of indoles from anilines

The direct Pd-catalyzed oxidative coupling of two C-H-bonds within N-aryl-enamines 1 allows the efficient formation of differently substituted indoles 2. In this cross-dehydrogenative coupling, many different functional groups are tolerated and the starting material N-aryl-enamines 1 can be easily prepared in one step from commercially available anilines. In addition, the whole sequence can also be run in a one-pot fashion. Optimization data, mechanistic insight, substrate scope, and applications are reported in this full paper.     

Synthese und Kristallstruktur der Spiro-Verbindung [(i-Pr)2P(S)NSiMe3]2SnCl2

Synthesis and Crystal Structure of the Spirocycle [(i-Pr)₂P(S)NSiMe₃]₂SnCl₂ The reaction of (i-Pr)₂P(S)N(SiMe₃)₂ ( 1 ) with SnCl₄ in 2:1 ratio yields under elimination of ClSiMe₃ the four-membered spirocycle [(i-Pr)₂P(S)NSiMe₃]₂SnCl₂ ( 2 ). The molecular structure of 2 was investigated by an X-ray structure analysis. Compound 2 crystallises in the monoclinic space group P2₁, Z = 2, a = 938.1(1), b = 1 424.1(2), c = 1 207.2(1) pm, β = 110.59(1)°, R = 2.05% for 4 102 reflexions. Compound 2 is a spirocycle with two Sn? N? P? S-rings joined at tin. The two rings are in cis-position.     

Conformational analysis of three pyrophosphate model species: Diphosphate,methyl diphosphate,and triphosphate

Whereas theoretical investigations of the energetic origin of hydrolyzing a pyrophosphate linkage abound, few studies have focused on the energetics of the rotation of this linkage. This less-studied property of the pyrophosphate linkage was investigated here by use of ab initio calculations to characterize the conformational space of three model species of pyrophosphate anions: diphosphate (P₂O), methyl diphosphate (CH₃P₂O), and triphosphate (P₃O). By carefully selecting conformationally distinct rotational isomers of the three model compounds, their potential surfaces were thoroughly explored. In addition to showing that a terminal phosphate group is indeed very flexible in accordance with the general perception of free rotation, a number of intriguing features of this linkage emerged from the ab initio calculations, which include an influential sp3-hybridized C HO intramolecular hydrogen bond in methyl diphosphate, and a highly restricted rotational space pertaining to the central pyrophosphate linkage of the triphosphate anion. These ab initio findings were then evaluated by, and proved insightful in, follow-up examinations of experimentally determined complex structures of proteins and their dinucleotide or adenine and guanine triphosphate ligands. © 1999 John Wiley & Sons, Inc. J Comput Chem 20: 1702–1715, 1999     

Copper-catalyzed synthesis of α-ketothioamides from ketones

In this paper, the conversion of acetophenone to α-ketothioamide was reported in the presence of CuI as the catalyst and S₈/DMF as the coupling partners. The presence of both KF and NaOH was found to be necessary to achieve the high yield of the product. Propiophenone and butyrophenone also reacted in the presence of phenylboronic acid as an additive. Willgerodt-Kindler products were not observed in these reactions.     

Electrodeposition mechanism of Ni?Mo?P alloy in the solution of ammoniac citrate

The induced codeposition mechanism of Mo, P and Ni from the solution of ammoniac citrate was studied by means of steady-state polarization, AC impedance and X-ray Photoelectron Spectroscopy (XPS). The result of electrochemical measurements proved that [NiCit(NHs)₂]- is the electro-active species of nickel, though nickel ions exist mainly as [NiCit(NH₃)₃]^? in ammoniac citrate. XPS experiments proved the existence of tetravalent molybdenum corresponding to MoO₂ on the surface of mme deposits. The intermediate product, MoO₂, WM probably reduced to Mo in the alloy deposit by atomic hydrogen adsorbed on the induced metal nickel. The reduction of H₂PO^?₂ occurs through two distinctive steps with PH₃ an an intermediate, which subsequently reacts with atomic hydrogen to form P in the alloy deposit. The electrodeposition mechanism was proposed in this paper.     

Synthese und Kristallstruktur eines μ-Methylen-μ-hydrido-dialanats [R2Al(μ-CH2)(μ-H)AlR2]− (R = CH(SiMe3)2)

Synthesis and Crystal Structure of a μ-Methylene-μ-hydrido-dialanate [R₂Al(μ-CH₂)(μ-H)AlR₂]^? (R = CH(SiMe₃)₂) tert-Butyl lithium reacts with the recently synthesized methylene bridged dialuminium compound [(Me₃Si)₂CH]₂Al? CH₂? Al[CH(SiMe₃)₂]₂ 2 in the presence of TMEDA under β-elimination; the thereby formed hydride anion is bound in a chelating manner by both unsaturated aluminium atoms forming a 3c–2e–Al? H? Al bond. The crystal structure of the product shows two independent molecules differing only slightly in bond lengths and angles, but significantly in conformation. While one of the Al₂CH heterocycles deviates little from planarity with a rough C₂ symmetry for the whole anion, the other one is folded with an angle of 21.1° and the arrangement of the substituents is best described by C_s symmetry.     

Amide‐Directed Tandem C?C/C?N Bond Formation through C?H Activation

The transformation of C? H bonds into other chemical bonds is of great significance in synthetic chemistry. C? H bond‐activation processes provide a straightforward and atom‐economic strategy for the construction of complex structures; as such, they have attracted widespread interest over the past decade. As a prevalent directing group in the field of C? H activation, the amide group not only offers excellent regiodirecting ability, but is also a potential C? N bond precursor. As a consequence, a variety of nitrogen‐containing heterocycles have been obtained by using these reactions. This Focus Review addresses the recent research into the amide‐directed tandem C? C/C? N bond‐formation process through C? H activation. The large body of research in this field over the past three years has established it as one of the most‐important topics in organic chemistry.