The simultaneous determination of chloride, nitrate and sulphate by isotachophoresis using bromide as a leading ion

A new method has been devised to allow the determination of small inorganic anions using isotachophoresis. This method makes use of indium(III) as a counter ion to manipulate the effective mobilities of inorganic anion species by means of complexation reactions. This new procedure successfully allowed the simultaneous determination of nitrate, chloride and sulphate to be realised on a capillary scale instrument and in a chip-based separation device. The electrolyte system developed to allow the separation to be achieved employed a 10mM bromide-based leading electrolyte containing 1.25 mM indium(III) at pH 3.15 and a terminating electrolyte of cyanoacetic acid.     

Determination of haloalkane dehalogenase activity by capillary zone electrophoresis

A new sensitive method has been developed for the determination of haloalkane dehalogenase activity. The enzymatic reactions were carried out directly in thermostatted autosampler vials and the formation of product - bromide or chloride ions - was monitored by sequential capillary zone electrophoresis runs. The determinations were performed in a 75 microm fused-silica capillary using 5 mM chromate, 0.5 mM tetradecyltrimethylammonium bromide (pH 8.4) as a background electrolyte, separation voltage 15 kV (negative polarity) and indirect detection at sample wavelength 315 nm, reference wavelength 375 nm for brominated and chlorinated substrates, respectively 0.1 M beta-alanine-HCl (pH 3.50) as a background electrolyte, separation voltage 18 kV (negative polarity) and direct detection at 200 nm for brominated substrates. The temperature of capillary was in both cases 25 degrees C. The method is rapid, can be automated, and requires only small amount of enzyme preparation and substrate.     

Isotachophoresis of beta-blockers in a capillary and on a poly(methyl methacrylate) chip

Analysis of the beta-blockers oxprenolol, atenolol, timolol, propranolol, metoprolol, and acebutolol in human urine by a combination of isotachophoresis (ITP) and zone electrophoresis (ZE) was investigated. Methods were developed with a conventional capillary electrophoresis (CE) apparatus and a poly(methyl methacrylate) (PMMA) microchip system. With CE the separation of oxprenolol, atenolol, timolol, and acebutolol from a standard solution containing 5 microg/mL of each compound was accomplished by performing ZE with transient ITP. The electrolyte system consisted of 10 mM sodium morpholinoethane sulfonate (pH 5.5) and 0.1% methylhydroxyethylcellulose as the leading electrolyte and 30 mM ortho-phosphoric acid (pH 2.0) as both the terminating and the ZE background electrolyte. With the microchip system the separation of oxprenolol and acebutolol from a standard solution containing 10 microg/mL of each compound was accomplished by a coupled-channel ITP-ZE device using the same leading electrolyte solution as the CE system but 5 mM glutamic acid (pH 3.4) as terminating and background electrolytes. The systems were used for analyses of patient urine samples. Water-soluble hydrophilic matrix compounds were removed from the urine samples by solid-phase extraction (SPE). Limits of quantification below 5 microg/mL could be achieved. The PMMA ITP-ZE chip has not earlier been used for analyses of any drugs from urine samples.     

Contact conductivity detection of polymerase chain reaction products analyzed by reverse-phase ion pair microcapillary electrochromatography

We describe the development of an integrated microelectrophoretic system consisting of a contact conductivity detector mounted on-chip for monitoring the separation of double-stranded (ds) DNA fragments produced via the polymerase chain reaction (PCR) using microcapillary electrochromatography as the separation mode. The separation was carried out in a polymer-based microfluidic device, hot-embossed into poly(methylmethacrylate) (PMMA), whose walls were functionalized to produce a C(18)-terminated surface to act as the stationary phase (open channel format). The carrier electrolyte contained the ion-pairing agent, triethylammonium acetate (TEAA) to allow the separation to be carried out using reverse-phase ion-pair capillary electrochromatography (RP-IPCEC). The microelectrophoretic separations were investigated utilizing various solvent strengths (acetonitrile/water) with 25 mM TEAA to observe the effects on the separation efficiency as well as the chromatographic development time and detector performance. The field strength significantly affected the quality of the separation, with no separation observed at 333 V/cm for a low mass dsDNA sizing ladder, but baseline separation achieved using a field strength of 67 V/cm. It was observed that the solvent strength affected the retention behavior of the polyanionic molecules as well as the electroosmotic mobility. Higher acetonitrile compositions in the run buffer resulted in reduced plate numbers, which produced lower chromatographic resolution. The use of conductivity detection allowed mass detection sensitivities in the range of 10(-21) mol with a separation efficiency of 10(4) plates and the performance of the detector independent of the acetonitrile content used in the carrier electrolyte.     

High-sensitivity microchip electrophoresis determination of inorganic anions and oxalate in atmospheric aerosols with adjustable selectivity and conductivity detection

A sensitive and selective separation of common anionic constituents of atmospheric aerosols, sulfate, nitrate, chloride, and oxalate, is presented using microchip electrophoresis. The optimized separation is achieved in under 1 min and at low background electrolyte ionic strength (2.9 mM) by combining a metal-binding electrolyte anion (17 mM picolinic acid), a sulfate-binding electrolyte cation (19 mM HEPBS), a zwitterionic surfactant with affinity towards weakly solvated anions (19 mM N-tetradecyl,N,N-dimethyl-3-ammonio-1-propansulfonate), and operation in counter-electroosmotic flow (EOF) mode. The separation is performed at pH 4.7, permitting pH manipulation of oxalate's mobility. The majority of low-concentration organic acids are not observed at these conditions, allowing for rapid subsequent injections without the presence of interfering peaks. Because the mobilities of sulfate, nitrate, and oxalate are independently controlled, other minor constituents of aerosols can be analyzed, including nitrite, fluoride, and formate if desired using similar separation conditions. Contact conductivity detection is utilized, and the limit of detection for oxalate (S/N = 3) is 180 nM without stacking. Sensitivity can be increased with field-amplified sample stacking by injecting from dilute electrolyte with a detection limit of 19 nM achieved. The high-sensitivity, counter-EOF operation, and short analysis time make this separation well-suited to continuous online monitoring of aerosol composition.     

Separation of phenolic acids by capillary electrophoresis with indirect contactless conductometric detection

A new method for the electrophoretic separation of nine phenolic acids (derivatives of benzoic and cinnamic acids) with contactless conductometric detection is presented. Based on theoretical calculations, in which the mobility of the electrolyte co- and counterions and mobility of analytes are taken into consideration, the electrolyte composition and detection mode was selected. This approach was found to be especially valuable for optimization of the electrolyte composition for the separation of analytes having medium mobility. Indirect conductometric detection mode was superior to the direct mode as predicted theoretically. The best performance was achieved with 150 mM 2-amino-2-methylpropanol electrolyte at pH 11.6. The separation was carried out in a counter-electroosmotic mode and completed in less than 6 min. The LODs achieved were about 2.3-3.3 microM and could be further improved to 0.12-0.17 microM by using a sample stacking procedure. The method compares well to the UV-Vis detection.     

Separation of lidocaine and its metabolites by capillary electrophoresis using volatile aqueous and nonaqueous electrolyte systems

The separation of the basic drug lidocaine and six of its metabolites has been investigated both by using volatile aqueous electrolyte system, at low pH and by employing non-aqueous electrolyte systems. In aqueous systems, the best separation of the compounds under the investigated conditions was achieved by using the electrolyte 60 mM trifluoroacetic acid (TFA)/triethylamine (TEA) at pH 2.5 containing 15% methanol. With this electrolyte, all seven compounds were well separated with high efficiency and migration time repeatability. The separations with bare fused-silica capillaries and polyacrylamide-coated capillaries were compared with higher separation efficiency with the latter. On the other hand, near baseline separation of all the seven compounds was also obtained by employing the non-aqueous electrolyte, 40 mM ammonium acetate in methanol and TFA (99:1, v/v), with comparable migration time repeatability but lower separation efficiency relative to the aqueous system.     

Identification of inorganic ions in post‐blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

Novel CE methods have been developed on portable instrumentation adapted to accommodate a capacitively coupled contactless conductivity detector for the separation and sensitive detection of inorganic anions and cations in post‐blast explosive residues from homemade inorganic explosive devices. The methods presented combine sensitivity and speed of analysis for the wide range of inorganic ions used in this study. Separate methods were employed for the separation of anions and cations. The anion separation method utilised a low conductivity 70 mM Tris/70 mM CHES aqueous electrolyte (pH 8.6) with a 90 cm capillary coated with hexadimethrine bromide to reverse the EOF. Fifteen anions could be baseline separated in 7 min with detection limits in the range 27–240 μg/L. A selection of ten anions deemed most important in this application could be separated in 45 s on a shorter capillary (30.6 cm) using the same electrolyte. The cation separation method was performed on a 73 cm length of fused‐silica capillary using an electrolyte system composed of 10 mM histidine and 50 mM acetic acid, at pH 4.2. The addition of the complexants, 1 mM hydroxyisobutyric acid and 0.7 mM 18‐crown‐6 ether, enhanced selectivity and allowed the separation of eleven inorganic cations in under 7 min with detection limits in the range 31–240 μg/L. The developed methods were successfully field tested on post‐blast residues obtained from the controlled detonation of homemade explosive devices. Results were verified using ion chromatographic analyses of the same samples.     

Development of a fully buffered molybdate electrolyte for capillary electrophoresis with indirect detection and its use for analysis of anions in Bayer liquor

A new counterion-buffered molybdate electrolyte was developed and optimized for simultaneous quantitative determination of up to eight anions (chloride, sulphate, oxalate, fluoride, formate, malonate, succinate, and acetate) in Bayer liquor by capillary electrophoresis with indirect detection at 214 nm. The separation parameters were optimized in respect to separation of the critical analyte group fluoride-formate-malonate, with the optimal electrolyte prepared from molybdic trioxide containing 5.0 mmol/L MoO3, 1.3 mmol/L cetyltrimethylammonium bromide (CTAB), and buffered with diethanolamine (DEA) to pH 9.2 (ca. 20 mM DEA). Total length of separation capillary was 80 cm, resulting in run time of under 4 min. The method is suitable for a wide concentration range of the analytes (1-50 mg/L) with linear calibration plots (R2 = 0.9983-0.9999). Relative standard deviations were 0.05%-0.07% for migration times and 0.67%-2.04% for peak areas. The detection limits were in the range of 0.17-0.51 mg/L or 2-10 micromol/L (hydrostatic injection of 30 s of 1000 x diluted sample). Due to its good buffering capacity, the electrolyte exhibited an excellent ruggedness and good tolerance to the alkaline samples. Consequently, Bayer liquor samples could be diluted as little as 100 x which allows more sensitive determination of minor components over previous methods. The method was successfully applied to analysis of Bayer liquor samples with recoveries in the range of 95-105%.     

Nonaqueous CE using contactless conductivity detection and ionic liquids as BGEs in ACN

N,N'-Alkylmethylimidazolium cations have been separated in NACE when one of the N,N'-dialkylimidazolium salts (ionic liquids (ILs)) was used as an electrolyte additive to the organic solvent separation medium. The separated species were 1-methyl-, 1-ethyl-, 1-butyl-, 1-octyl-, 1-decyl-3-methylimidazolium and N-butyl-3-methylpyridinium cations and BGE composed of 1-ethyl-3-methylimidazolium ethylsulfate or 1-butyl-3-methylimidazolium trifluoroacetate [BMIm][FAcO] (A6; B2) diluted in ACN. It was demonstrated that contactless conductivity detection (CCD) may be applied to monitoring the separation process in nonaqueous separation media, allowing to use the UV light-absorbing imidazolium-based electrolyte additives. There could be marked three concentration regions of added ILs; at first ionic strength of BGE below 1-2 mM, and then the actual electrophoretic mobility of analytes rises from 0. At concentrations above 1-2 mM, the added IL facilitated separation. In concentration region of 1-20 mM, the actual electrophoretic mobility of analyzed imidazolium cations was increasing with decrease in separation medium ionic strength. At higher concentrations of BGE (above 30 mM), the conductivity of the separation media became too high for this detector. Some organic dyes were also successfully separated and detected by contactless conductivity detector in a 20 mM A6 separation electrolyte in ACN.     

Chiral separation of methadone, 2-ethylidene- 1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) and 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline (EMDP) by capillary electrophoresis using cyclodextrin derivatives

A stereoselective method was developed for the simultaneous determination of methadone and its two major metabolites, 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) and 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline (EMDP) by capillary electrophoresis. Five beta-cyclodextrin (betaCD) background electrolyte (BGE) additives were evaluated for resolution efficiency. The conditions for baseline resolution of each of the three enantiomer pairs was determined to be 1 mM heptakis-(2,6-di-O-methyl)-beta-cyclodextrin (DMbetaCD) in 100 mM phosphate at pH 2.6. This method represents the first successful method for the resolution of the six enantiomers associated with the metabolism of methadone. The utilisation of doubly coated capillaries in conjunction with betaCD derivatives for a faster separation of the methadone-related enantiomers is also reported. The coated capillaries were prepared using a polycation of poly(diallyldimethylammonium chloride) (PDDAC) and a polyanion of dextran sulfate. Baseline resolution of the methadone enantiomers was achieved with a BGE of 8 mM (2-hydroxy)propyl-beta-cyclodextrin (HPbetaCD) in 100 mM phosphate at pH 2.6. The migration times for the stereoselective methadone separation were approximately 4 min, which represented a reduction by a factor of approximately three, compared to that attained using analogous conditions with the uncoated capillary.     

Miniaturised isotachophoresis of DNA

This paper presents the findings of a feasibility study investigating the behaviour of DNA under conditions of miniaturised isotachophoresis. An electrolyte system comprising a leading electrolyte of 5mM perchloric acid at pH 6.0 and a terminating electrolyte of 10mM gallic acid was devised and used to perform isotachophoresis of DNA containing samples on a miniaturised poly(methyl methacrylate) device. Under such conditions it was found that no separation of DNA fragments was observed with the substance migrating instead as a single isotachophoretic zone. Whilst such a result shows the method is unsuitable for analysis DNA it offers significant potential as a means of sample preparation for subsequent analysis using another method. This is because the single zone of DNA formed is preconcentrated to a constant concentration governed by the leading ion and is separated from all species with different effective electrophoretic mobilities.     

Separation selectivity of anionic metal complexes of N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid in ion and ion electrokinetic chromatography

The complexes of Fe(III), Co(III), Mn(III), Al(III), Cu(II), Ni(II), Cd(II) and Zn(II) with N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid (HBED) were separated by ion exchange in different modes: ion chromatography (IC) and ion electrokinetic chromatography (IEKC). In column IC these complexes were separated on an IonPac AS4a anion-exchange column (Dionex, USA). Parameters of the background electrolyte that were examined in IEKC mode include polymer, competing ion concentration and pH. The use of poly(diallyldimethylammonium chloride) (PDADMACl) as a modifier in IEKC provides separation selectivity only slightly different from that observed in IC on the IonPac AS4a column. Optimal separation conditions were found to be: 0.1 mM HBED, 50 mM PDADMAOH, 10 mM Na2 B4 O7, pH adjusted to 10 with acetic acid. The use of an aromatic ligand allowed a 10-fold decrease in detection limits of metal ions in comparison with previously studied EDTA. A separation efficiency up to 400,000 theoretical plates was demonstrated for IEKC.     

Study of enzymatic reaction by electrophoretically mediated microanalysis in a partially filled capillary with indirect or direct detection

Electrophoretically mediated microanalysis (EMMA), in combination with a partial filling technique and indirect or direct detection, is described for the study of enzymes reacting with the high mobility inorganic or organic anions as substrates or products. Part of the capillary is filled with a buffer optimized for the enzymatic reaction, the rest of the capillary with the background electrolyte being optimal for the separation of substrates and products. With haloalkane dehalogenase, chosen as a model enzyme, the enzymatic reaction was performed in a 20 mM glycine buffer (pH 8.6). Because of the wide substrate specificity of this enzyme, utilizing chlorinated as well as brominated substrates and producing either nonabsorbing chloride or absorbing bromide ions, two different background electrolytes and detection approaches were adopted. A 10 mM chromate-0.1 mM cetyltrimethylammonium bromide background electrolyte (pH 9.2) was used in combination with indirect detection and 20 mM beta-alanine-hydrochloric acid (pH 3.5) in combination with direct detection. The Michaelis constant (K(m)) of haloalkane dehalogenase for 1-bromobutane was determined. The K(m) values 0.59 mM estimated by means of indirect detection method and 0.17 mM by means of direct detection method were comparable with the value 0.13 mM estimated previously by gas chromatography.     

Capillary electrophoretic separation of heparin oligosaccharides under conditions amenable to mass spectrometric detection

A capillary electrophoresis method for the separation of high-molecular-mass heparin oligosaccharides compatible with mass spectral detection was developed. Structurally defined heparin oligosaccharides ranging in size from tetrasaccharide to tetradecasaccharide were used to optimize the conditions. Applying normal and reversed polarity modes, these oligosaccharides were separated by CE under various conditions. Ammonium hydrogencarbonate (30 mM at pH 8.50) used as the running electrolyte system gave good separation efficiency and resolution in the normal polarity mode. Application of this method to the separation of complicated heparin oligosaccharide mixtures required the addition of electrolyte additives. Ammonium hydrogencarbonate (30 mM), containing triethylamine (10 mM), was useful for the separation of complex oligosaccharide mixtures. Run-to-run and day-to-day precision and limits of detection were established for these separations.     

Separation and Determination of D-Gluconic Acid Produced During Fermentation by Capillary Zone Electrophoresis

Abstract

A novel method was developed for separation and determination of D-gluconic acid produced during fermentation by capillary zone electrophoresis (CZE) with direct UV detection at 214 nm, using selected carrier electrolyte composed of 6 mM potassium biphthalate, 50 mM disodium hydrogen phosphate and 15% (v/v) acetonitrile. The effects of concentration of phthalate, phosphate and organic modifier (acetonitrile), as well as temperature for the separation were investigated. The method is simple, inexpensive and will make it very useful in the gluconic acid industry.     

Determination of iodide in samples with complex matrices by hyphenation of capillary isotachophoresis and zone electrophoresis

A method has been developed for the determination of iodide in mineral water, seawater, cooking salt, serum, and urine based on hyphenation of capillary ITP and zone electrophoresis. A commercially available instrumentation for capillary ITP with column-switching system was used. ITP served for removal of chloride present in the analyzed samples in a ratio of 10(6)-10(7):1 to iodide, zone electrophoresis was used for evaluation. Isotachophoretic separation proceeded in a capillary made of fluorinated ethylene-propylene copolymer of 0.8 mm id and 90 mm total length to the bifurcation point filled with a leading electrolyte (LE) composed of 8 mM HCl + 16 mM beta-alanine (beta-Ala) + 10% PVP + 2.86 mM N(2)H(4)x2HCl, pH 3.2; and a terminating electrolyte composed of 8 mM H(3)PO(4) + 16 mM beta-Ala + 10% PVP + 5 mM N(2)H(4), pH 3.85 for all the matrices except seawater. For ITP of seawater the LE consisted of 50 mM HCl + 100 mM beta-Ala + 10% PVP + 2.86 mM N(2)H(4)x2HCl, pH 3.52. Distance of conductivity detector from the injection point and bifurcation point was 52 and 38 mm, respectively. Zone electrophoresis was performed in a capillary made of fused silica of 0.3 mm id and 160 mm total length filled with LE from isotachophoretic step. LODs reached for all matrices were 2-3x10(-8) M concentration (2.5-4 microg/L) enabled monitoring of iodide in all analyzed samples with RSD 0.4-9.3%. Estimated concentrations of iodide in individual matrices were 10(-6)-10(-8) M.     

On the use of response surface strategy to elucidate the electrophoretic migration of carbohydrates and optimize their separation

This paper focuses on the optimization with a design of experiments of a new CE method for the simultaneous separation of four carbohydrates of interest (fructose, glucose, lactose, and sucrose) and five potentially interfering carbohydrates (ribose, xylose, maltose, mannose, and galactose) with a highly alkaline separation electrolyte for subsequent applications to food, beverage, forensic, or pharmaceutical samples. First, the factors that potentially affect the carbohydrate migration were identified: NaOH concentration in the separation electrolyte, separation temperature, and separation electrolyte conductivity. A central composite design was then carried out to determine and model the effects of these three factors on normalized migration times and separation efficiency. From the model, an optimization of the separation was carried out using a desirability analysis based on resolutions between adjacent peaks and analysis time. The optimum conditions obtained were a separation electrolyte composed of 98 mM NaOH and 120 mM NaCl to adjust the conductivity at 4.29 S/m and a separation temperature fixed at 26.5°C. Finally, these conditions were experimentally confirmed and the robustness of the obtained separation was checked.     

Simultaneous separation of inorganic anions and cations by capillary zone electrophoresis

A new capillary electrophoretic approach for simultaneous separation of fast anions and cations is demonstrated. Indirect UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was developed. Two electrolyte systems based on imidazole-nitrate and copper(II)-ethylenediamine-nitrate were investigated for the simultaneous separation of chloride, sulphate, hydrocarbonate, potassium, ammonium, calcium, sodium and magnesium ions. Experimental parameters that were evaluated included a nature of UV chromophore, pH of electrolyte, a nature of complexing agent. The method permits the excellent separation of three anions and five cations in only 4 min using electrolyte system containing 2.5 mmol l⁻¹ Cu(NO₃)₂, 5 mmol l⁻¹ ethylenediamine and 1 mmol l⁻¹ fumaric acid at pH 8.5 adjusted with tetraethylammonium hydroxide.     

Determination of domoic acid by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis--capillary zone electrophoresis (cITP-CZE) method for the determination of domoic acid in shellfish and algae is described. The optimised cITP-CZE electrolyte system was 10 mM HCl + 20 mM beta-alanine (BALA) + 0.05% hydroxyethylcellulose (leading electrolyte), 5 mM caproic acid (terminating electrolyte) and 20 mM caproic acid + 20 mM BALA + 0.1% HPMC (background electrolyte). A clear separation of the domoic acid from the other components of methanolic sample extract was achieved within 25 min. Method characteristics, i.e., linearity (0-200 microg/l), accuracy (recovery 101+/-3%), intra-assay repeatability (2.4%) and detection limit (1.5 microg/l) were determined. Speed of analysis, low laboriousness, high sensitivity and low running cost are the typical attributes of the cITP-CZE method. Developed method was successfully applied to analysis of shellfish samples and food supplements containing algae extract.